New Data Source

I moved my report data to a new SQL server and on established reports I applied a new datasource. The underlying scripts remained the same. When I try to run the reports it is asking for the credentials I supplied to access the database.
I'm not sure why it is doing this.
Any ideas would be greatly appreciated.

Hi,
Please check how your data source connection is configured for the report @Data sources tab on your report. you might have a similar one like this below. Change it to other options as how you need them and that should work.
Hope this helps
Thanks
BHanu

Similar Messages

Sharepoint 2013 RS - Adding a New "Data Source" or "Report Builder" in a Library

I've installed SQL Server Reporting Services SharePoint Integration Mode. I also enabled SQL Reporting in the Library setting. But, When I click to open a new "Data Source" or "Report Builder" an error occurs:
'New Document' requires a Microsoft
SharePoint Foundation-compatible application and web browser. To add a document to this document library, click the 'Upload Document' button.
SharePoint 2013 Enterprise
SQL Server 2012 SP1 + RS add-in + PowePivot add-inn
MS Office 2013 Professional Plus
Internet Explorer 10
I've also tried a hotfix pakage for office 2013 called: owssupp2013kb2726997fullfilex64glb
Sharepoint Stssync Handler add-in infromation in Internet Explorer:
Name: SharePoint Stssync Handler
Publisher: Microsoft Corporation
Type: ActiveX Control
Architecture: 32-bit and 64-bit
Version: 15.0.4517.1001
File date: ‎Tuesday, ‎May ‎21, ‎2013, ‏‎12:57 PM
Date last accessed: ‎Today, ‎December ‎16, ‎2013, ‏‎36 minutes ago
Class ID: {BDEADEF5-C265-11D0-BCED-00A0C90AB50F}
Use count: 6
Block count: 0
File: OWSSUPP.DLL
Folder: C:\Program Files\Microsoft Office\Office15

Hi,
i had the same problem. First we figured out, that the Report Builder was working in the Root Site Collection of a Web Application but not in any other Site Collection of the WebApplication.
After that we took a look how the Report Builder is started. The Content Type got a Click Once Application as Template, but you can't open the URL in the Browser neither the referenced file can be found in the Feature folder on the SharePoint Server. Turns
out SharePoint does some crazy http redirection and that this doesn't work on Site Collections which are not at the root. At least if you installed Reporting Services Add In Service Pack 1.
Fun Fact: If you start the Report Builder on the Root Site Collection you can create a Report which works on any Site Collection. Its just the launch if the Report Builder which is broken.
Our Solution was the SQL Server 2012 Service Pack 1 Cumulative Update 8 which fixed the Problem.
You can request a download here: http://support.microsoft.com/kb/2917531
Select the "2012_SP1_RSShrPnt_CU8_2917531_11_0_3401_x64" Fix and install it on every SharePoint Server in your Farm.

SP2013 RS - Adding a New "Data Source" or "Report Builder" in a Library

I've installed SQL Server Reporting Services SharePoint Integration Mode. I also enabled SQL Reporting in the Library setting. But, When I click to open a new "Data Source" or "Report Builder" an error occurs:
'New Document' requires a Microsoft
SharePoint Foundation-compatible application and web browser. To add a document to this document library, click the 'Upload Document' button.
SharePoint 2013 Enterprise
SQL Server 2012 SP1 + RS add-in + PowePivot add-inn
MS Office 2013 Professional Plus
Internet Explorer 10
I've also tried a hotfix pakage for office 2013 called: owssupp2013kb2726997fullfilex64glb
Sharepoint Stssync Handler add-in infromation in Internet Explorer:
Name: SharePoint Stssync Handler
Publisher: Microsoft Corporation
Type: ActiveX Control
Architecture: 32-bit and 64-bit
Version: 15.0.4517.1001
File date: ‎Tuesday, ‎May ‎21, ‎2013, ‏‎12:57 PM
Date last accessed: ‎Today, ‎December ‎16, ‎2013, ‏‎36 minutes ago
Class ID: {BDEADEF5-C265-11D0-BCED-00A0C90AB50F}
Use count: 6
Block count: 0
File: OWSSUPP.DLL
Folder: C:\Program Files\Microsoft Office\Office15

Hi Ali,
According to the current description, the issue may occur because SQL Server 2012 Reporting Services add-in feature for SharePoint 2013 isn’t installed correctly.
To resolve the issue, you need to reinstall add-in feature for SharePoint 2013.
References:
Install or Uninstall the Reporting Services Add-in for SharePoint
Document Library - Enable New Document, Edit Document Features
If the issue persists, please feel free to contact me.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

How to register 10g ODBC driver list in the Create New Data Source window

Hi
I've checked the dll for the odbc is in the correct home path. However, i don't see the list of the driver when i try to create a new data source. Is there a way besides reinstall the client again.
Thanks
Rgds
Ung

Hi Joe,
According to your description, after you run C:\Windows\SysWOW64\odbcad32.exe, Access driver is not displayed when you expand HKEY_LOCAL_MACHINE>ODBC>ODBCINST.INI node.
The issue is caused by wrong path of odbccad32, please make sure that you are using Administrator account or you have administrative privileges, then refer to the following steps:
Go to Control Panel.
Click Administrative Tools.
Right-click Data Sources(ODBC) to open Properties dialog box.
In Target text box, type %windir%\syswow64\odbcad32.exe
In Start in text box, type %windir%\syswow64, then click OK to save the settings.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

Error creating a new Data Source for Oracle connection

I'm trying to create a new data source connection to our
Oracle 10gR2 server using ColdFusion Administrator 6.1 Standard on
a Windows 2003 server.
I created a System DSN ODBC connection for Oracle. I can use
the ODBC connection when connecting an Access db to Oracle but when
I try to use it w/ ColdFusion Admin it generates the following
error message:
Connection verification failed for data source: sitest2
[]java.sql.SQLException: [Macromedia][SequeLink JDBC
Driver][ODBC Socket]internal error:
Driver's SQLAllocHandle on SQL_HANDLE_ENV failed
The root cause was that: java.sql.SQLException:
[Macromedia][SequeLink JDBC Driver][ODBC Socket]internal error:
Driver's SQLAllocHandle on SQL_HANDLE_ENV failed
Any help or recommendations would be greatly appreciated.
Tina

The schema/user is system and the password is alpha-numeric, upper/lower case, no special char ...
As a workaround I was able to add the password to the entry in the datasources.xml file and restarted BI Pub.
The JDBC is working ... I can test the connection successfully ... just wont save the entry
Edited by: tread on Oct 17, 2011 11:55 AM

Error when creating a new Data Source

All, This is on BI Publisher 11g.
When I create a new data source and supply password and then click "Apply" button on top right corner, i get following error
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
what am i doing wrong?
Thank you for reading this post.
Thanks,
R

The schema/user is system and the password is alpha-numeric, upper/lower case, no special char ...
As a workaround I was able to add the password to the entry in the datasources.xml file and restarted BI Pub.
The JDBC is working ... I can test the connection successfully ... just wont save the entry
Edited by: tread on Oct 17, 2011 11:55 AM

Exception occurs while creating a new data source using BIRT RCP desighner!

Guys,
Please help me on this !
I have created a pluin project( BIRT ODA API) using elipse and i have placed it in plug-in folder of BIRT RCP Desighner.
When i try create a new data source i am getting the below exception and the jars are available in plugin folders :
org.eclipse.datatools.connectivity.oda.consumer.helper.OdaHelperException: Unable to create the ODA driver's connection factory. (openmrsdb.impl.Driver) ;
java.lang.ClassNotFoundException: openmrsdb.impl.Driver
     at org.eclipse.datatools.connectivity.oda.consumer.helper.OdaDriver.loadDriverInstance(OdaDriver.java:230)
     at org.eclipse.datatools.connectivity.oda.consumer.helper.OdaDriver.init(OdaDriver.java:177)
     at org.eclipse.datatools.connectivity.oda.consumer.helper.OdaDriver.<init>(OdaDriver.java:76)
     at org.eclipse.datatools.connectivity.oda.profile.OdaConnectionWrapper.getOdaDriverHelper(OdaConnectionWrapper.java:236)
     at org.eclipse.datatools.connectivity.oda.profile.OdaConnectionWrapper.getOdaConnectionHelper(OdaConnectionWrapper.java:225)
     at org.eclipse.datatools.connectivity.oda.profile.OdaConnectionWrapper.<init>(OdaConnectionWrapper.java:57)
     at org.eclipse.datatools.connectivity.oda.profile.OdaConnectionFactory.createConnection(OdaConnectionFactory.java:26)
     at org.eclipse.datatools.connectivity.internal.ConnectionFactoryProvider.createConnection(ConnectionFactoryProvider.java:77)
     at org.eclipse.datatools.connectivity.internal.ConnectionProfile.createConnection(ConnectionProfile.java:354)
     at org.eclipse.datatools.connectivity.ui.PingJob.run(PingJob.java:57)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Caused by: java.lang.ClassNotFoundException: openmrsdb.impl.Driver
     at org.eclipse.osgi.framework.internal.core.BundleLoader.findClassInternal(BundleLoader.java:434)
     at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:369)
     at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:357)
     at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:83)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at org.eclipse.osgi.framework.internal.core.BundleLoader.loadClass(BundleLoader.java:289)
     at org.eclipse.osgi.framework.internal.core.BundleHost.loadClass(BundleHost.java:227)
     at org.eclipse.osgi.framework.internal.core.AbstractBundle.loadClass(AbstractBundle.java:1269)
     at org.eclipse.datatools.connectivity.oda.consumer.helper.OdaDriver.loadDriverInstance(OdaDriver.java:208)
     ... 10 more
Could you please any one help on this.!
Thanks in advance

when defining a data source through the admin web page, don't add '!' in front of the password.
! is needed only when configuring a data source in the mapViewerConfig.xml file.

Error with JNDI when creating new data source

Hi :
This weekend, while adding new applications to the production environment we ran into a problem where the JNDI tree of the new managed servers was unreachable.
The error message we saw was:
<1364066840022> <BEA-149231> <Unable to set the activation state to true for the application 'EOI'.
weblogic.application.ModuleException:
at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:349)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:107)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:411)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:74)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:66)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:16)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:42)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
weblogic.common.ResourceException: is already bound
at weblogic.jdbc.common.internal.RmiDataSource.start(RmiDataSource.java:387)
at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:136)
at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:97)
at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:346)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:107)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:411)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:74)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:66)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:16)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:42)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
We traced the issue to a new data source that was added were we found that along with the the expected jndi name entry in the jdbc xml file, there were two blank entries:
<jndi-name>weblogic.jdbc.DataSource.EOI</jndi-name>
<jndi-name></jndi-name>
<jndi-name></jndi-name>
The data source was deleted, consoles restarted, the data source recreated and the issue occured again. To get by the issue we had to manually remove the blank tags from the xml file.
We created 2 new data sources, and it only happened on the one. The same data source each time. Additionally, this issue did not occur when these changes were made in our lower (development, qa) regions.
The version is the same in all three regions.
WebLogic Version:
WebLogic Server Temporary Patch for 9324911 Wed Feb 03 22:38:01 PST 2010
WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967
Is this a known issue? And if so, is there a way to avoid it, other than to start constantly checking the newly created XML files?
Thank you
ted

Yes, this is a common issue and documented in Oracle Docs:
WebLogic Server: Getting "weblogic.common.ResourceException: is already bound" exception with JDBC JNDI name (Doc ID 1154250.1)
The only fix is that you need to remove the empty value entries.
Cheers!!
AJ

Created new data source, does not appear in the list

Hi I created a new data source using information provided in http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_1.html. But the new data source I created does not appear in the wizard. Could some body give me a clue? Can somebody point me to more detailed documentation on how to integrate a new data source into Reports Builder?
thanks
Srinivas

Hi
I desperately need help to troubleshoot why my data source is not appearing in the list eventhough I feel I have done things as per the tutorial. From reading the tutotial I am not clear -
- If specifying an icon is mandatory. If I don't specify an icon my datasource should still appear right?..without an icon?
- It is mandatory to implement the editor. I have hard coded things because I don't foresee any interaction by a user with the data source. There is just one column which WILL always appear if this DS is chosen.
- Finally in the integration instructions(http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_5.html) they mention that the classes have to be compiled with "report build" , is that a tool?
thanks
Srinivas

Authorization Issue on creating New Data Source

Hi Experts,
   We met several issues after we upgrade one of our BW system from 3.5 to BI 7.0.
   We have a customized role for our BW developer which name is SYN:BC_USER_FOR_BWDEVELOPER. When we assign this role to the users, the users should have access to create new data source, create/change on ODS, infocube, infobjects,etc. The developers also need access transformation roles and BEX Web Templates.
   After we upgrade our BW system from 3.5 to BI7.0. All the access has been denied. Then I tried to added many authorization objects in the developer role, then the developer role can access all the data source except transformation rules.
The following is the authorization objects which I have added:
S_RS_BCS
S_RS_BITM
S_RS_COMP
S_RS_COMP1
S_RS_CTT
S_RS_ERPT
S_RS_HIER
S_RS_ICBE
S_RS_IOBJ
S_RS_IOMAD
S_RS_ISET
S_RS_ISOUR
S_RS_ISRUM
S_RS_THJT
S_RS_TOOLS
S_RS_UOM.
S_RS_DS
S_RS_ISNEW
S_RS_DTP
S_RS_TR
S_RS_PC
S_RS_OHDST
S_RS_DAS
S_RS_BTMP.
I am not sure whether there are any other authorization objects or sth should be added to the developer role, could you give me some suggestions?
Thanks,

When i execute create transformation rules with the account which already have bw_all role, the system shows you have no authorization.
The following is the error after i execute /nsu53:
Authorization check failed.
Authorization Obj. S_RS_TR Data Warehousing Workbench -Transformation
Object Class RS Business Information Warehouse
   Activity                                03
   Source                                 ZM_SUM
   Target                                   ZWHYTEST
   Subtype of the Source
   Subtype of the Target
   Type of Source                      ODSO
   Type of Target                       TRCS
-fran

How to restrict "insert new data source" in Analysis, edition for Microsoft Office report

Hi Experts,
There is a requirement in my current project: when an end user access a Analysis, edition for Office Report from BI platform, they can view and refresh the report. But users should not be able to add new data source in that Analysis Report. As per my understanding, that means "insert data source" button should remain disable for the user.
I have check all available access levels from CMC, but cannot find any. It will be great if you let know correct access level in CMC for the same.
Any comments/recommendation will be appreciated.
I am using BOXI4.1 SP3 version with Microsoft Office 2013.
Thanks in advance.
Regards,
Animikh Chaudhury

The answer from our account manager is that there is only one license model for AO - which means every user is able to refresh, navigate, use planning functions and add source data (whith the standard license). Adding a DS is not really more then navigation because you can build a Query with all key figures and characteristics of a cube which gives you flexibility. That makes sense because there are no authority checks installed from SAP to avoid this (maybe this is different in combination with HANA and workspaces) .
Futhermore SAP has no possibility to measure how many users are doing which functions instead of recording every action of every user. But where should they do it? You could use it with BO or with Netweaver or in mixed Environments. The BO license check is done on BO platform and there you have no possibility to create new users which you need for connection (I'm not sure how this is monitored in a pure BW Environment without BO).
Furterhmore another possibility to add new data is using vba. You don't really need the buttons from the menu.

Are there any new data sources?

Hi I have a doubt. Please clarify.
Are there any new data sources for 2LIS_01_S001, 2LIS_11_VAHDR, 2LIS_12_VCHDR. Because in an interview I told that I had extracted from these data sources.
Then the interviewer had asked me, "Is there any specific reason for using the LIS data sources, because SAP has strongly recommended not to use these LIS data souces".
I replied that SAP has recommended not to use LIS extraction to extract the data from these data sources and I used LO extraction to extract data from these data sources.
My first question is, Is it correct what I told to the interviewer?
If what I told to the interviewer is wrong then my second question is
Is there any new name available for these the following data sources:
2LIS_01_S001,
2LIS_11_VAHDR,
2LIS_12_VCHDR
If so please let me know what it is?
Please advise.
Thank you.
TR.

Hi Anil,
Thank you for that reply. When you say,
"<b>But the DS 2LIS_01_S001 is old one</b>, These DS can be replaced by all Latest 11,12 and 13 application Datasources."
What is the new name for the customer data source 2LIS_01_S001?
Also is there any link or any document where I can get a list of the old data sources and the new ones. Please advise.
Thank you.
TR.

Cannot create new Data Source - Oracle ODBC does not show in System DSN

On Windows 7 x64, Installed Oracle 10g to use ODBC to connect to Oracle database but am not able to create new data source as Oracle ODBC does not show in System DSN.... only shows SQL server etc etc...

If you installed 32-bit Database Client, try the 32-bit ODBC admin tool: C:\Windows\SysWOW64\odbcad32.exe
Note that 10.2.0.5 is the earliest "10g" version supported on Win 7.
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15680/toc.htm#BABEBBJF
As an alternative, try the 11.2 Instant Client.
For 32-bit apps: http://www.oracle.com/technetwork/topics/winsoft-085727.html
64-bit/x64: http://www.oracle.com/technetwork/topics/winx64soft-089540.html

Creating New data source....

Hi,
I want to create a new data source. Can anybody give me step by step guide for this?
Also is it possible to create a new data source by copying standard data source and then adding extra fields to that.
Pts for answers.
Regards,
Shri.
Message was edited by:
shridhar deshmukh
Message was edited by:
shridhar deshmukh
null

Does anyone have directions on how to add datasources to connect from BI 7.0 on Win2003 to a NON SAP system in ORA 9206?
I have following the directions in the document Transferring Data with DB connect, loaded the appropriate DSL for oracle in
usr\sap\sid\dvebmgs00
stopped and restarted SAP BI
tried to create the datasource using rsa1
but get the error unexpected return value 11 when calling up CON
also
cannot access source syste psdev (which is the non SAP Oracle system)
Please advise...
Maria

Creating new Data Source Error - Database connection Failed

Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.

Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance.

Unable to connect with new Data Source

Hi everybody,
After many developpment, I finally get my class to do what we need with crystal and webi report using Rebean and RAS SDK's.
But, today we found a special case that I was thinking to solve following examples but the solutions given by the example do not work.
Here is the case :
We have Crystal report in BO using DSN file localted on the C:\ disk of the server. So, the Information for a such report founded in the IConnectionInfo object is :
ConnectionInfo Kind = CRQE
QE_DatabaseType = >ODBC (RDO)< (java.lang.String)
SSO Enabled = >false< (java.lang.Boolean)
Database DLL = >crdb_odbc.dll< (java.lang.String)
QE_DatabaseName = >< (java.lang.String)
QE_LogonProperties = >{FILEDSN=C:\path to DSN, UseDSNProperties=false, Trusted_Connection=false}< (com.crystaldecisions.sdk.occa.report.lib.PropertyBag)
QE_SQLDB = >true< (java.lang.Boolean)
QE_ServerDescription = >C:\path to DSN< (java.lang.String)
Today, we had to import old crystal report in BO and for that report, the Data Source gives a DSN file on another disk R:\...
So for the report where I found in a IConnectionInfo object a DSN file beginning by R:\, I have to change it by a new one pointing to the right DSN file on the C:\ disk. (The DSN file on the C:\ work perfectely because we can use it with other report).
I follow this example : http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/e068eba5-1f57-2c10-10a0-91e111c98bc7
And so I get the following code where I put all the parameter need for the correct DSN file on the C:\ :
ConnectionInfos ci = (ConnectionInfos)dbcontroller.getConnectionInfos(null).clone();
               IConnectionInfo ici = ci.getConnectionInfo(0);
               // Create a new connection and start setting new properties
               IConnectionInfo newConnectionInfo1 = new ConnectionInfo();
               newConnectionInfo1.setKind(ConnectionInfoKind.CRQE);
               newConnectionInfo1.setUserName("momtest");
               newConnectionInfo1.setPassword("testmom");
               PropertyBag newpb = new PropertyBag();
               newpb.put(PropertyBagHelper.CONNINFO_CRQE_DATABASETYPE,"ODBC (RDO)");
               newpb.put(PropertyBagHelper.CONNINFO_SSO_ENABLED,false);
               newpb.put(PropertyBagHelper.CONNINFO_DATABASE_DLL,"crdb_odbc.dll");
               newpb.put(PropertyBagHelper.CONNINFO_CRQE_DATABASENAME,"");
               newpb.put(PropertyBagHelper.CONNINFO_CRQE_SQLDB,true);
               newpb.put(PropertyBagHelper.CONNINFO_CRQE_SERVERDESCRIPTION,"path to DSN");
               PropertyBag LogonProperties = new PropertyBag();
               LogonProperties.put("FILEDSN","path to DSN");
               LogonProperties.put("UseDSNProperties", false);
               LogonProperties.put("Trusted_Connection","false");
               newpb.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES,LogonProperties);
               newConnectionInfo1.setAttributes(newpb);
               try {
                    dbcontroller.replaceConnection(ici, newConnectionInfo1, null, DBOptions._useDefault);
               catch (ReportSDKServerException error)
                 System.out.println(error.getServerError());
               System.out.println("--->" + dbcontroller.getServerNames());
               System.out.println("Refreshing document...");
               clientDoc.refreshReportDocument();
               System.out.println("Document refreshed");
               ByteArrayInputStream byteIS = (ByteArrayInputStream) clientDoc.getPrintOutputController().export(ReportExportFormat.PDF);
When we arrived at line "ByteArrayInputStream byteIS = (ByteArrayInputStream) clientDoc.getPrintOutputController().export(ReportExportFormat.PDF);" we get a message that the logon failed.
Someone have an idea?
Edited by: jerome.vervier on Dec 29, 2011 4:23 PM

Thanks Adam
It ensure me that I get no usual error in my code and it confims me what I think.
Thanks for help !

New Data Source

Similar Messages

Maybe you are looking for