New DB Space/Info cube

BW Experts,
Right now in our BW Landscape we have the following Table spaces to which whenever a new info cube is created it is assigned to these Tablespaces.
PSAPDIMD
PSAPDIMI
PSAPFACTD
PSAPFACTI
Now the DBA /BASIS have created new "locally managable" table spaces
PSAPDIM2D
PSAPDIM2I
PSAPFACT2D
PSAPFACT2I
I need to create new cubes and assign it to these new table spaces. How can I assign the cubes I create to these new table spaces?
Thanks
Ashwin

Ashwin -
When you create your new cube - from the cube maintanence screen you can select Extras --> Maintain DB Storage Parameters. From that screen you can select the data class that was assigned to the new tablespaces. I actually have never done this, however, that is my best guess!
Thanks

Similar Messages

Add New Characteristic to Info Cube

Matez,
 Relating to Standard Info Cube 0PCA_C01 - PCA: Transaction Data
 I added 2 Info Object[0COSTELMNT,0COSTGRP] to this Info Cube
 I modified the Info Source 0EC_PCA_1, to include this 2 Info Object[0COSTELMNT,0COSTGRP].
 However, in my Transfer Rule I get the following error message when I attempted to map these Info Objects in my Transfer Rule

 InfoObject 0COSTELMNT does not exist in the InfoSource 0EC_PCA_1

Hi John,
You get this error because you have no such fields in your data sources. Though, you included them into cube and infosource, you cannot map infoobject with null. You have to enhance your datasource including there these two fields, write user exits to populate them etc.
But, IMHO, the whole idea of bringing into profit center cube such cost parameters as cost element and cost group is very very bad. The principles of splitting costs and profits are very different. Its something like comparing apples and oranges. The link between these two areas is a profit cost centers relationship.
If you want to match your profits and costs Id recommend the following:
1. Use CO-PA.
2. Bring all cost relevant data into cube for costs. To put into profit cube a cost center char (or a profit center char - into costs cube) and build multiprovider on those two cubes.
Best regards,
Eugene

Adding a new key figure to Info Cube

Can I add a new key figure to an existing Info cube in which data is loaded?
Assume that In Info Cube we have the following.
Stu Id -- Characteristic
Maths , Physics , Chemistry -- Key figures
These are the info objects which are already available and transfer rules are already available for the same in the infosource.
Could any one let me know how to add one more new key figure (total ) , which is the sum of the three marks to the Info Cube and populate the data in to the same.
I have tried the following steps , but could not get the solution.
1). Create a new key figure info object (total).
2). Add the same to the communication and pull the same into transfer rules of the existing info source and activate the same.
3). Add the new key figure to the info cube.
4). Open transfer rules for the info cube and change the mode from NO updation to Addition for the particular key figure (total).
When I perform the 4th step it is giving a red symbol beside the key figure in update rules and I'm not able to activate the same.
Any help on how to add key figures to update rules and transfer rules is highly appreciated and points would be assigned.
Thanks

1.add new Keyfigure to Infocube.
2.Go to Update rules> go to update type of that Keyfigure>selct formula in update method>create new formula>here you can add up your 3 keyfigures-->OK.
activate update rules and InfoProvider.Check all are active or not..
by using Export generate datasouce ,you populate data(historical data) to new keyfigure as well.Then you have to delete historical data requests.
or iyou can create formula in query designer as well as srinivas suggested.that would be better option.

Creating a new field in an exisiting info cube ?

Hi All !
How do I create a new field in an exisiting Info cube ?
rgards
Tom.

Hai Tom...
 Go to the Existing InfoCube...
 Select and Double Click it...
 The InfoCube Characteristic Window will Come to the Screen..
 That has many additional Functions Like data View && Dimensions && Navigate Attributes...
 In the Bottom of that Fuction Tags You will see the Tags like Structure && Templates....
 Select the Fields that was you like in the Template You Just Select and press the <- Symbol. It will add to the InfoCube as a Field.....
 BalajeeKannan

To add new key figure in existing info cube (BI 7.0)

I m using BI 7.0
How can I add new Key figure in my existing info cube?
Thanks
KS

hi,
check the following the links
http://help.sap.com/saphelp_nw04s/helpdata/en/58/85e5414f070640e10000000a1550b0/frameset.htm
thread's regarding remodeling
Remodeling Toolbox
Remodelling option in 7.0
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=remodeling+&adv=true&sdn_author_name=&sortby=cm_rnd_rankvalue
hope this help you
happy new year 2008
regards
harikrishna N

How to add new infoobject to existing cube or dso?

Hi all,
Can we add new infoobject to exixting cube in BW 3.5 ver? if yes how can we add? Please provide me steps.
Thank you.
Sunil

Hi Sunil,
If you want to add new info object to the IC or DSO which is already holding data - then you need to make a copy of that particular DSO/IC and load the data into dummy.
Now delete the data from the IC/DSO to which you want to add the new info object. once the data is deleted it will allow you to add new info object to you IC/DSO.
save it and activate the IC/DSO
load the data from Dummy DSO and from new run on wards the newly updated info object will also get updated(historical data will not be updated if its newly added to DS as well).
If you want the historical data for the newly added field then you need to drop the compelte data and need to extract from source.
Note: You can't include the new info objects are change the existing info objects if there is data exist in the IC/DSO
Regards
KP
Edited by: prashanthk on Dec 31, 2010 10:54 AM

Info cube

Hi gurus
I have done enhancement to populate a new field to the DataSource,
then how would i ad this object to the info cube,
and shall i delete the data which is already in the info cube.
thanx
vidhu

Hi,
If you have added a new key figure then
1) you need not delete the data just add the key figure and run a delta it will bring all the records into this new filed and everything will work fine.
2) You can delete the data and run a full load till the cube.
If you have added a char to the data source
1) you will have to add this char to the cube and then you will have top assign to a dimesion and therfoer you will have to delete tha data from the cube and once updat rule is done you will have to again to init data transfer.
Thanks

Delta records are not loading from DSO to info cube

My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
Shamma

Data is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue.

Info Cube not getting full records

Hi All,
I am extracting data from the flat file (60k records..of which most fields have binary values),, am getting the values into data source..but when loading from data source to info cube am not getting total records..
the load is successful and it is showing as transferred 60k records and added 510 records in the manage tab of the info cube.
what would be the problem ....any help is appreciated.

Hi,
Data with same combination for characterstic is added and only for unique charactersitc value it will give new record.
Material---Customer-Price
10002----- C1--
20
10002----- C1--
20
10002----- C1--
20
10002----- C2--
20
SO As you can see in flat file 4 records are there but in inofcube it will be only 2
Data with same combination of charactersitc is added and with unique combo only it will display.
Hope it clears you.
Also in addition please check the data in flat file.
Regards,
AL

Unable to see the request in Reconstruction Tab of Info Cube

Hi Experts,
We are scm 5.1 version.
Actually I have created extraction process to extract data from Demand Planning area. I have extracted data from planning area also. I can see the request in to PSA as well as Info Cube but I am not able to see the request in reconstruction tab.
Is there any setting to see the request in to Reconstruction tab of the info cube?
Please advise..
Regards
Sujay

Hi rathy,
Is there any way to support the equivalent of reconstructions with the new BW 7.0 design?
I will explian in detail..
Reconstruction is critical functionality for our current DP solutions, it allows us to "reconstruct" old requests from the backup InfoCube (based on what's been kept in the PSA) and use this to restore data in the planning area to a day in the past. It is used whenever there is a technical or user error than needs to be un-done. I believe there is a way to accomplish with the BW 7.0 design.
Please suggest...
Thanks in advance..
Regards
Sujay

How to Load data in remodeled info provider(Info cube) ?

I have added one key figure in existing cube by using remodeling process.
I changed the transformation rule and reloaded the data but the new key figure is still showing value as 0.
Can anyone please explain complete step by step process of loading data in remodeled info cube.
I am new to SAP BW. please help me to sort out this issue.
thanx

Hi,
After adding the key figure, use one of the following options to populate data.
1. Constant: To populate constant data for new key figure.
2. User Exit: To populate data from different source.
For replacing the key figure, use the following option to populate data.
Customer Exit: To populate data for the replaced key figure.
There is a very nice Blog on this.
/people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/008f9fef-22e4-2a10-d994-a17c55ca06f0
Hope this helps.
-Vikram

Steps to create Data loading from Flat File to Info Cube in BI

Hi,
     I am very new BW, I need some one help. When I am trying to create info source i am any pop window stating to create Transaction data or master data.
     After creating Info source, I dont know how to assign this info source to source system (which i created).
      When select the context menu of info source I dont have option to assign the datasource.
      And one more thing is When I am creating the Info Cube. I cant understand how to create.
      Please some one help me how to map the fields to Source system.
Regds
Dave.

Hi,
For flat file upload, first you need to create the source system.
Then you need to create the infosource based on the format of the flat file you are going to upload or vice versa depending on your requirements.
Once your infosource is ready, right click on it and select assign datasource. Here you can assign your flat file datasource. Then create an infopackage and give the path from where the file is to be upload to BW (in the infopackage).
Also look at the thread below for procedure on flat file upload :
http://help.sap.com/saphelp_nw04s/helpdata/en/8e/dbe92341c84242be2c7d3917f1c197/frameset.htm
Cheers,
Kedar

How to check the size of an info cube?

Dear all
Is there any t-code which can be used to see the total disk space occupied by a specific cube?
I know ST14 can be used for the TOP 30 cubes and stuff.
but my cube is not in top 30.....so how should i see the total size of my cube in bytes?
please help me...i need it urgently
Please dont recommend the SAP note on Sizing...i have it...the caliculation gave me wrong answer!
Total Points assured!!!!
Edited by: reddy reddy on Jan 27, 2008 9:34 AM

Hi,
we can calculate the size of the info cube.using this information
Each keyfiure occupies 10 Bytes of memory
Each Char occupies 6 Bytes of memory
So in an Infocube the maximum number of fields are 256 out of which 233 keyfigure, 16 Dimesions and 6 special char.
So The maximum capacity of a cube
= 233(Key figure)10 + 16(Characteristics)6 + 6(Sp.Char)*6
In general InfoCube size should not exceed 100 GB of data.
While considering sizing, you must consider factors like years of data rewuired for reporting, acceptable repsonse time, database limitations, archiving options, etc.
pl read this document:
[https://websmp209.sap-ag.de/sizing]
Hope this helps,
regards
CSM Reddy

Data correction at Info cube

Hi,
For an Info cube, we had done compression, rollup of aggreagates. And, now we had identified wrong data entry for a field from one of the datasources.
How can we correct the information of that filed for the old records without downtime or deleting the complete information of the cube.
Thanks a ton in advance.

Haripriya,
Its a characteristic or keyfigure...?
--> If its a characteristic you can follow one of these 2 options...
1. Create a new datasource and load into CUBE(Do not map any keyfigures...)
2. Loop back from CUBE to same CUBE and write a routine to populate right value for the filed by lookup. In this case also do not map any keyfields.
--> Create export datasource on CUBE and use.
--> If its a keyfigure..
Need to delete data and load, due to addition.
Hope it Helps
Srini

I want use 0SEM_BCS_10 info cube for our BCS in BI.

Hi ,
I want use 0SEM_BCS_10 info cube for our BCS in BI. We have an R/3 ECC 6.0 with Appl Support Patch 15.
We have not implemented the NEW GL functionality in OUR R/3 system. We have done only Technicahal Upgradation fron 4.7 to ECC 6.0 last year.
My question is, that can i Use this '0SEM_BCS_10' infocube . If yes that, please povide some details
Regards,
Nilesh Labde

Hi Nitesh,
Before using Cubes for BCS, Please go through this url
http://help.sap.com/saphelp_sem60/helpdata/en/a8/b3d63bc4a69574e10000000a11402f/frameset.htm

New DB Space/Info cube

Similar Messages

Maybe you are looking for