New dedicated Server, incompatiblew with VMware Server 1.0

Hi
my old root running vmware server 1.0 is more than outdated and needs to be replaced, as the downtimes cause of hardware issues get bigger and bigger
Now I need to find a solution to run the virtual windows machines on debian 7.5 (wheezy)
vmware server 2 seems to be not the solution, as its also only working with patches and an outdated kernel in debian squeeze
i need to start some windows server virtual machines, i can do this manually, but i need several running parallel
any ideas?

Hi,
You can successfully run the old VMware Server 1.0.10 on a Debian Wheezy. I'm actually doing it.
Please find all relevant patches at VMware Server 1.0.10 and linux kenel 3.1.0.

Similar Messages

Is ITS application server compatible with VMware

Hi SAP Gurus,
Please let us know if ITS application server compatible with VMware
Thanks
Rajesh

Yes... i have use it in the past without problems..
regards
Juan

How to enable high availability on SQL Server 2005 with Windows Server 2008 Enterprise R2

Dear Folks,
I would like to ask you about this thing. I'm working for IT department for bank in Myanmar. Our bank have up to 96 branches across all of Myanmar including H.O. We are using Microsoft SQL Server 2005 with Windows Server 2008 for our banking
information system. My main problem is having to backup and restore the database backup files every time the servers in branches goes down for whatever reasons. I want to deploy this feature of high availability and failover cluster using Windows Server 2008
and SQL Server 2005. Our branches have 2 Servers. One is for Primary and other is for Backup. What I want to do is that, I want to change Backup Server to Primary Server whenever the Primary Server goes down for whatever reasons. All the working data and databases
from Primary will immediately replicated into Backup Server along with all the IP information of Primary Server. Please give me step by step guide for this process.

Try below
http://blogs.msdn.com/b/cindygross/archive/2009/10/23/checklist-for-installing-sql-server-2005-as-a-clustered-instance.aspx
I will recommend you to upgrade SQL server to newer version for support as well as flexibility.
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

How to Expand the Screen of Windows Server 2003 on VMware Server 2 ?

Folks,
Hello. Because Windows 7 is not compatible to be installed PeopleSoft PIA, I have to install VMware Server 2 and then install Windows Server 2003, that is compatible with PIA, on the virtual machine.
But when I open Windows Server 2003 on the virtual machine, the screen of Win2K3 is very small, and its size is about 1/4 of the screen of my computer screen. This is not comfortable to work for a long time.
Does any folks know how to expand the screen of Windows Server 2003 on VMware Server 2 virtual machine so that its size covers the entire screen of my computer ?
Thanks in advance !
Lucy

Did you already installed the VMWare tools onto your VMWare guest OS ? Generally, it helps a lot to be able to redefine a larger screen definition.
Nicolas.

Server 2008 with SQL server 2003 installation problem in SAP 8.8 in clint

Hello Sir
I want to install clint for SAP B1 8.8 and we have windows server 2008 with sql server 2005
when i install the clint i got one error in DI API installation that licence server name and port number is not available.
Please tell me the complete process to install 8.8. clint with which supporting software i have to install in clint machine.
and what things i have to check in server for installation .
Please kindly reply ASAP.
Thanks
Vaibhav Kothari

Hi,
every question / issue you should know, is descripted in the following manual, please read it and follow the installation instruction manual:
https://websmp201.sap-ag.de/~sapidb/011000358700000150922010E.zip
Regards Steffen

Server Virtualization with Windows Server Hyper-v and System Center Expiration

Prometric says: STATUS: Passed, EXPIRATION: 22-03-2015.
Does this means that I have to take the exam again before 22-03-2015?

Hi, Daniel.
Let me understand this exactly.
You log into http://register.prometric.com/ and then on the left side, you click
Candidate History to see your list of exam attempts.
Under the Status Expiration column, all the way to the right, it should read
Passed and the date/time you passed it. Are you sure it reads
2015 and not
2014? Is there also
another date on that same row/column for this exam's expiration below the date you passed it?
On the Prometric site, this column is supposed to display the date you passed it and optionally the date it expires for many non-Microsoft exams.
Typically for Microsoft exams, this final column will state the day you passed the exam and
not an expiration date.
As well, by passing this exam, I know that you also earned a Specialist: Server Virtualization with Windows Server Hyper-V and System Center certification title. This certification does
not expire.
Exam 74-409:
http://www.microsoft.com/learning/en-us/exam.aspx?ID=74-409
Have you looked at your MCP transcript to see if a expiration date is mentioned there? No matter what it states on the Prometric site, your transcript will describe any exam/certification expiration dates much
more accurately.
Also, I understand that the 74-nnn series exams are Microsoft partner exams. Perhaps they
do require recertification to keep up to date with the latest certifications.
If your transcript does really contain an expiration, you can contact Prometric about this and see if they can help you understand it. Here is the Prometric contact information for Microsoft exams:
https://www.prometric.com/en-us/clients/pages/contact-numbers.aspx?client=microsoft
As well, if they can't help you, you can call/email Microsoft Learning Support with information found here:
http://www.microsoft.com/learning/en-us/help.aspx.
Finally, if you want to be sure how this exam works against your employer's Microsoft partnership, you can log in and view the Partner support page here:
https://partners.microsoft.com/partnerprogram/help/en-us/whgdata/whlstt14.htm#14
I hope someone can help you get this cleared up.
Good luck!
Best wishes, Davin Mickelson

Solaris 10 Installed with VMware Server 1.0.3 free version

Hello
I am a beginner in S 10 and planned to start learning it installing S 10 on a VMware server 1.0.3 (free) on my machine where I have win xp pro pre-installed. I downloaded S 10 SW as ISO for CD and installed the same. My problem is the entire file system on S 10 seems read-only and I do not have access to create/change any new/existing file.
Can u help?

What account are logged as? You can type "who" command without the quotation. You should be logged in a root. Root has total control of the system. If you want to go to the root account type "su" command.

Problem with vmware server 1.0.10 and usb mounting into guest

Hi, I really ve a serious problem here because I ve some reason that I need to use vmware sv 1.0.10 with windows 7 64bit pro as the host and win xp pro sp3 as guest os .... now i can installed vmware on my win 7 with pressing F8 then disble driver signature technique and I also sign vmware driver with win7 using some tool...
However, my problem is that i cant mount USB flash drive into the guest... it just show me my flash drive's name at the toolbar>>removable device>>usb but when i click on it.. nothing happen .. and after that when i check vmware log I've found that my vmware saw my flashdrive normally as it should be... i really ve no idea how to solve this....
I also tried set .vmx config with many methods but nth can help me...
Ps. I know that vmware server may b ve a big issue with win7 compatible things but i do really need to make this version of VM working with my usb flashdrive... plz help me.. Thank you guys all:)))

Hi creamac,
Welcome to communites
Please install vmware tool and then on vmware task bar select connect or unplug usb drive . You
will find that on right hand corner above to task bar of host machine .
"Nature always wears the colors of the spirit."

Can't makepkg with vmware-server or virtualbox

i can't makepkg either vmware-server or virtualbox, i get the following error:
==> Making package: vmware-server 2.0.2-1 i686 (Mon May 3 11:27:26 PDT 2010)
==> Checking Runtime Dependencies...
==> Missing Dependencies:
-> xinetd
-> vmware-server-modules
==> Checking Buildtime Dependencies...
==> ERROR: Could not resolve all dependencies.
probably the simplest error ever, help?

makepkg -s
Plus install vmware-server-modules from the aur.
Last edited by loafer (2010-05-03 18:51:38)

Difference between database features - SQL Server 2008 R2 navtive vs SQL Server 2012 with SQL Server 2008 compatibility set?

I am investigating the impact of upgrading from SQL Server 2008 R2 to SQL Server 2012. To reduce the impact of the upgrade, I am planning to restore / create our application database onto SQL Server 2012 with compatibility level 100 (SQL Server 2008 and
SQL Server 2008 R2).
Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?

Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?
Yes there can be difference and impact there are few features deprecated in SQL Server 2012 you must be aware about that. Please see
Deprecated Database Features in SQL Server 2012
Deprecated SQL Server features in SQL Server 2012
After you migrate database to 2012 please don't move ahead with production unless you have tested your application to new created database
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Installing PeopleSoft HRMS 9.0 on Windows Server 2008 with SQL Server 2008

Hi there,
Recently I was involved to develop a POC with PeopleSoft and as I was very new to PeopleSoft, I had bunch of issues while installing PeopleSoft. It took me almost more than couple of weeks to finally get the PeopleSoft Application up and running.
I had bunch of questions also asked in this Oracle forum like :
Step by Step PeopleSoft HRMS Installation from scratch.
Tuxedo10gR3VS2008 patches absolutely needed for Peopetools Installation
Thanks to the replies from all you folks. That helped a lot. Anyways, so I thought of just writing a blog about the things I did while installing PeopleSoft on Windows with SQL as backend DB. There are many posts already on the web describing the steps but mostly with Oracle DB and Linux. Hence, here are the posts for PeopleSoft on Windows:
http://geekswithblogs.net/BizTalkUnleashed/archive/2012/01/24/installing-peoplesoft-hrms-9.0-on-windows-server-2008-with-sql-again.aspx
Hope it helps to newbie's in PeopleSoft Apps like me.
Regards,
Vishal Mody
Edited by: 897150 on Jan 25, 2012 10:11 AM
Edited by: 897150 on Jan 25, 2012 10:13 AM

Vijay
I hate to be rude, but I am following you for a couple of days now on this forum and even in the same tread and it looks like you do not want to helped, you just want quick answers. I do not see you putting any effort nor show any respect for the product or the people how try to help you. Keep in mind that everyone on this forum is voluntarily posting answers, nobody is getting paid, and I'm sure you do not pay to post here either, so please do not use words as asap and immediate.
You started of wrong, by following a post and not following the installation manual and even tried installing the wrong components.
The post was written by someone with experience on the subject who meets the installation requirements, with all respect to the poster of the blog.
I have to backup Nicolas in his saying.
Nicolas has asked you to use better thread title (more informative than just "installation help") and you created a new thread with this subject.
This does not say anything about the issue you are facing now.
I doubt you can successfully complete this installation, not meant personally, but you are using the wrong software, on the wrong OS, with no documentation.
My advise:
Stop with what you have done until now and start all over by following the installation manual and hardware & software requirements.
If you really want to master a PeopleSoft installation, you can follow following course at Oracle University: PeopleSoft PeopleTools Installation & Server Admin. Rel 8.50
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D61702GC10&p_org_id=1001&lang=US
Do not forget you are trying to install an ERP system, this is not done by starting an installer and clicking on the Next button three times.
Hakan

Can a server pool with single server be moved to a different manger?

Can an existing server in a pool running on an OVM manager be moved to a different manger. The pool has only one server and is not HA. If you try to register the server on the new manger by creating a new pool it errors that it has been registered with some other pool. Does anyone know the steps to re register a server and pool with a new manger without reinstalling OVS so that the existing guest VM can be imported through resources on the new manager after the pool is added?
Thanks in advance if anyone can help.
Dave

Greetings,
1- Please power-off and backup your virtual machines.
2- Stop the ovs-agent, remove the local DB and then recreate the local db, i.e..
# service ovs-agent stop
# rm -fr /etc/ovs-agent/db
# service ovs-agent start
3- Empty the /etc/ocfs2/cluster.conf file on both server, "# /dev/null> /etc/ocfs2/cluster.conf"
4- Create a new server pool with VM Manager and import the guests.
For details about Oracle VM Manager please review http://itnewscast.com/chapter-2-oracle-vm-architectural-review
Respectfully,
Roddy

MS Share Point Server Integrate with SAP Server

Hi,
   We are having MS Share Point Server in one machine and SAP Server (ERP6.0 EHP4) on another machine.
   I want to integrate MS Share Point Server with SAP ERP6.0 EHP4 System (for example if i want attach any docs in sap it has to be store in MS Share Point Server).
I stuided the some docs i had to know that to integrate msshare point server with sap server we need duet enterpise.where i have to install duet enterprise and how to integrate through duet,first iam working on this scenerio,guide me for the same.it will be more help to me.
Thanku

Hi,
   Thanks for information,when iam going to install : DuetConfig.exe /install on MS Share Point server iam getting error :
   The SharePoint farm is not accessible. Please verify that you have the necessary permissions to access the farm.
    I Gave the full permissions to login user still iam getting same error,guide me for the same.
Thanku

New install ZH77A-G43 with cloned Server 2003 won't boot in Safe mode

Hello,
I just installed a ZH77A-G43 into an existing PC box, new Core i3, new SATA CD and 500G drive, existing tape backup connected to a SCSI card. I cloned the new harddrive into 2 partitions, the first one being a bootable Server 2003. I installed the harddrive on another computer, and the partitions appear to be cloned correctly. When I boot off the new drive in the new hardware computer it gets to the Server 2003 splash screen, and then reboots during processing of acpitabl.dat (this is in Safe mode). I've tried booting from a Server 2003 installation CD, and that also results in a reboot.
I tried removing the SCSI card, and that results in a reboot before the MSI splash screen comes up.
This is the first time I've done a hardware change like this. The MSI instructions were very simple to follow and I was exciding to see the Server 2003 splashscreen after about 30 minutes of hardware installation. But now I'm stuck and request your help.
Regards, Philip

Hello xmad,
Thanks for the suggestions. The CD that wouldn't boot is Server 2003 64 bit--no service pacts. I just tried my VISTA CD and it came up and was ready to start the installation. The hardware is
Seagate 500G harddrive connected to SATA2
LG OEM DVDRW 24X internal connected to SATA1
2 sticks of DDR3 2GB 1333MHz
Quantum DLT-V4 tape backup drive connected to SCSI card
PSU is enclosed in a case labeled ANTEC DESIGN and I can't see any infor unless I take apart the enclosure.
I just removed the SCSI card, and the system reboots immediately after 1 second or so of the MSI splashscreen. With the SCSI card in, it reboots during the Server 2003 splashscreen (during processing of acpitabl.dat).
Should this system be compatible with Server 2003 64bit?
Should I next update the BIOS as you previously suggested?
Update: I currectly have BIOS E7758IMS V1.7

New Apple Convert - Printing With Print Server

I am having trouble printing.
I just bought my first Apple iBook G4 using Mac OSX 10.4.6. I have a Netgear Wireless Router with a Netgear PS121 Print Server plugged into one of the router ports. The print server is connected to my Brother MFC9700 Laser Printer.
I went through the process of adding the printer. I used the following settings:
IP Printer
Protocol: IPP
Address: The IP address of the print server
Queue: Left blank
Name: Laser
Location: Left blank
Print Using: Brother MFC-9700 CUPS v1.1
When I attempt to print (from .Mac Word) the printer box shows I am connected to 192.168.0.3 (IP of the Print Server) and the activity indicator (looks like a sideways barber shop pole) is moving but nothing happens on my printer.
Can someone please advise me?
Your help is greatly appreciated.
Mark Ehrmann
iBook G4 Mac OS X (10.4.6)

Try using the following URL instead
192.168.0.3/P1
The P1 is important.
Or try this instead
Start Printer Setup Utility
Click Add
Hold down the option key and click More Printers
Select Advanced from the drop down menu.
Select LPD/LPR Host or Printer
Enter this as the Device URI
lpd://192.168.0.3/P1
The P1 is important.
Note though that your Brother printer is not on the Netgear Compatibility List.
iFelix

New dedicated Server, incompatiblew with VMware Server 1.0

Similar Messages

Maybe you are looking for