New delay issues with already created projects in Captivate 6

Good afternoon,
I have about 20 projects that I've created with Captivate 6 with the past few months that are in need of some minor updating. They've always run fine, but when I open them for editing, I'm finding such things as a 10 second delay after the audio on a slide finishes and the next slide appears. The slides end within .5 seconds of the audio. When I play back the audio on an individual slide, it stutters, repeating the last few words or syllables. There are delays when a click box should appear, up to about 9 seconds, and delays after you click on the box before the next slide shows. There are several other problems, all dealing with delays.
I've run all the Adode updates, installed the latest Flash Player, restarted the laptop, and ran a virus scan. At this point, Captivate 6, and my 20 projects, are dead in the water.
Any ideas would be greatly appreciated.
Thanks.

Thanks Rod. I was able to run the batch file to remove the preferences. It seems to be marginally better, but I'm still getting delays which seem to be related to the stuttering in the audio that I mentioned earlier. I'm going to uninstall and reinstall to see what happens. Thanks again.

Similar Messages

  • Issue with Generate Create Script in new ODT 11.1.0.6.10 beta

    I've tried this on several tables in my database. I choose Generate Script to ... a file, for a given table it gives me the error message "An error occurred while writing to fil: \nValue was either too large or too smal for an Int32."
    (It doesn't matter if I'm in a Oracle database project or some other project.)
    Trying to Generate Script To Project... when I'm in a Oracle Database Project, Visual Studio (2005) crashes. It appears to be some overflow exception according to crashinfo:
    EventType : clr20r3 P1 : devenv.exe P2 : 8.0.50727.762 P3 : 45716759
    P4 : mscorlib P5 : 2.0.0.0 P6 : 461eee3d P7 : 407b P8 : a3
    P9 : system.overflowexception
    (With ODT 11.1.0.5.10 beta it worked fine dispite the issue discussed in thread: Re: Issue with Generate Create Script in new ODT 11.1.0.5.10 beta
    /Tomas

    Tried to debug this error and got these exception details. Hope it helps!
    /Tomas
    System.OverflowException was unhandled
    Message="Value was either too large or too small for an Int32."
    Source="mscorlib"
    StackTrace:
    Server stack trace:
    at System.Decimal.ToInt32(Decimal d)
    at System.Decimal.op_Explicit(Decimal value)
    at Oracle.Management.Omo.TableSpaceQuotaDetails.FillTableSpaceQuota(OracleDataReader reader)
    at Oracle.Management.Omo.User.FillTableSpaceQuotas(OracleDataReader reader)
    at Oracle.Management.Omo.Connection.GetUserCollection(Boolean refresh)
    at Oracle.Management.Omo.Connection.GetUsers(Boolean refresh)
    at Oracle.Management.Omo.TableSQLGenerator.GetCreateSQLs(OmoObject obj, ArrayList& typeAndNames, Boolean checkRequired, Boolean appendSchemaName)
    at Oracle.Management.Omo.TableViewBase.GetCreateSQLs(Boolean appendSchemaName)
    at Oracle.VsDevTools.OracleUILDBProjectServices.GenerateCreateScript(OracleUILConnCtx connCtx, String[] objectNames, String objectOwner, OracleUILObjectType objectType)
    at Oracle.VsDevTools.OracleUILDBProjectServices.GenerateCreateScriptAsyncMethod(IntPtr ppvObj, OracleUILConnCtx connCtx, String[] objectNames, String objectOwner, OracleUILObjectType objectType, ICollection& scriptText)
    at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
    at System.Runtime.Remoting.Messaging.StackBuilderSink.PrivateProcessMessage(RuntimeMethodHandle md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
    at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
    Exception rethrown at [0]:
    at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
    at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
    at Oracle.VsDevTools.OracleUILDBProjectServices.GenerateScriptAsyncMethodDelegate.EndInvoke(ICollection& scriptText, IAsyncResult result)
    at Oracle.VsDevTools.OracleUILDBProjectServices.OnGenerateScriptAsyncCompletion(IAsyncResult ar)
    at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
    at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
    at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
    at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
    at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)

  • Issues with transferring CS5 project with Adobe Dynamic Links to CS5.5

    Hello all!
    Has anybody encountered the issue with transferring CS5 projects with Adobe Dynamic Links to CS5.5?
    When I try to do it the movie hangs on at some clips which are AE compositions...
    The CS5 project works perfectly.
    All AE CS5 compositions are transerred to AE CS5.5 compositions.
    All 'old' Adobe Dynamic Links in Pr CS5.5 project are changed to 'new' ones (I mean, links to AE CS5 composition changed to links to AE CS5.5 compositions)...
    Any help will be appreciated

    Tried to play around. Realised that a solution should be somewhere around re-rendering, 'cos linked AE compositions were always displayed in yellow as if they were original footages - even I changed a composition within AE, just transitions, if they were, changed to red in Pr Pro sequence...
    However, I was unable to re-render 'Entire Work Area' even after deleting all Render Files, just 'Effects in Work Area'...
    Then I simply created a new sequence and copied and pasted all the clips from original sequence. Now I was allowed to 'Render Entire Work Area'.
    Voilà!

  • Captivate 8 - How to change to producing "project.json" file instead of a "project.txt" file?  Having issues with viewing published projects due to this.

    Captivate 8 - How to change to producing "project.json" file instead of a "project.txt" file?  Having issues with viewing published projects due to this.   Would be thankful fo rany/all advice.

    I'm having the same issue. I've been able to work around it by opening the txt file and copying the contents. Then I open a new file in Sublime Text 2, paste the contents and save the new file as "project.json". It seems to work, but it'd been nice if I didn't have to do this everytime I publish a new project.

  • Attach a New Price list with already booked Orders.

    hi...
    I want to attach a new price list with already booked orders.
    How it can be done??
    please help...
    Sunita Behl

    Assuming that your order is just booked and not part-shipped etc., the simplest method is to use the mass change feature from the classic Order Organizer to do this as I don't think changing at Order Header level will trigger a cascaded change to the lines (not in 11.5 anyway, you don't mention what release you're on).
    Select the order lines you want to change (presumably all) and assign the new price list name + Calculate Price flag = 'Yes' + new pricing date if appropriate. After this has completed, it's a good idea to change at header level too otherwise any new lines added to your order will still default to the older price list.
    Finally, if you've already acknowledged the order, you might also want to re-acknowledge with the price change.

  • Issues with using relative links in Captivate 8

    Is anyone else having issues with using relative links in Captivate 8?  These links all used to work in the previous version of Captivate. And I could have sworn this was fixed already once in Captivate 8 but it's popping up again for us. Here is the situation... We have courses that are made up of multiple lessons which as separate Captivate files. Within those lessons are buttons to link to external documents (which live in a shared document folder), demonstrations, etc.  We use relative links because we post these to our amazon servers and we also sell them to clients where they can post them on their own web servers or in their LMS.  SO we can't put in full paths for the links or we'd have to change them constantly.  So an example is that the link for a button might be "../Document/nameofdoc.pdf"  This would be going to a user guide or something that is posted in the "Document" folder that lives at the same level as the lesson's folder. But now, all of the sudden, none of our bazillion links is working. And I've tried buttons, hyperlinks, and even the old click box. Nothing works with relative links. And I did check the permissions on every file and folder on our Amazon server to verify nothing changed there as well.   Any suggestions?

    I have the same issue with relative links using Captivate 8.  I am trying to load Captivate modules into an LMS using relative links to document files within the LMS.  The links work fine during a site page test so not an issue in the LMS, but from the Captivate module they aren't working....
    Help?

  • Issue with Generate Create Script in new ODT 11.1.0.5.10 beta

    So I'm trying to determine if there's an issue with the Generate Create Script option in the new ODT 11.1.0.5.10 beta (when you right click on a table in Server Explorer).
    The SQL create script that it generates lacks the slash between lines. For example I generated the create script for my User table and this is what was generated:
    CREATE TABLE "DEV"."SYSTEM_USER_TB" ("RID" NUMBER(10,0),"USER_NAME" VARCHAR2(256 CHAR),"APPLICATION_RID" NUMBER(10,0),"FIRST_NAME" VARCHAR2(256 CHAR),"LAST_NAME" VARCHAR2(256 CHAR),"PW" VARCHAR2(128 CHAR),"PW_FORMAT" NUMBER,"PW_SALT" VARCHAR2(128 CHAR),"LAST_ACTIVITY_DT" DATE,"EXPIRATION_DT" DATE,"EMAIL" VARCHAR2(256 CHAR),"PW_QUESTION" VARCHAR2(256 CHAR),"PW_ANSWER" VARCHAR2(256 CHAR),"APPROVED_FLG" NUMBER(1,0),"LOCKED_OUT_FLG" NUMBER(1,0),"LAST_LOGIN_DT" DATE,"LAST_PW_CHANGED_DT" DATE,"LAST_LOCKOUT_DT" DATE,"FAILED_PW_ATTEMPT_CNT" NUMBER(6,0),"FAILED_PW_ATTEMPT_WINSTART" DATE,"FAILED_PW_ANSW_ATTEMPT_CNT" NUMBER(8,0),"FAILED_PW_ANSW_ATTEMPT_WINSTRT" DATE,"CREATED_BY_RID" NUMBER(10,0),"CREATED_DT" DATE,"MODIFIED_BY_RID" NUMBER(10,0),"MODIFIED_DT" DATE) TABLESPACE "USERS" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE ( INITIAL 131072 MAXEXTENTS 2147483645 MINEXTENTS 1 )
    CREATE UNIQUE INDEX "DEV"."XPKSTAFF" ON "DEV"."SYSTEM_USER_TB" ("RID" ) TABLESPACE "USERS"
    ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033033" PRIMARY KEY ("RID") USING INDEX "DEV"."XPKSTAFF" ENABLE VALIDATE )
    ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033032" CHECK ("RID" IS NOT NULL) ENABLE VALIDATE )
    CREATE TRIGGER "DEV"."SYSTEM_USER_TRG1"
    BEFORE
    INSERT
    ON "DEV"."SYSTEM_USER_TB"
    FOR EACH ROW
    begin
         select SYSTEM_USER_SEQ.nextval into :new.RID from dual;
    end;
    In my new Oracle Database Project, if I right click on the script and select "Run" or "Run On", the script fails saying:
    Connected.
    CREATE UNIQUE INDEX "DEV"."XPKSTAFF" ON "DEV"."SYSTEM_USER_TB" ("RID" ) TABLESPACE "USERS"
    ERROR at line 2:
    ORA-00922: missing or invalid option
    If I then add, a slash between lines, the script runs successfully and creates the table/trigger and whatever else just fine. For example, I changed the above generated code to look as follows:
    CREATE TABLE "DEV"."SYSTEM_USER_TB" ("RID" NUMBER(10,0),"USER_NAME" VARCHAR2(256 CHAR),"APPLICATION_RID" NUMBER(10,0),"FIRST_NAME" VARCHAR2(256 CHAR),"LAST_NAME" VARCHAR2(256 CHAR),"PW" VARCHAR2(128 CHAR),"PW_FORMAT" NUMBER,"PW_SALT" VARCHAR2(128 CHAR),"LAST_ACTIVITY_DT" DATE,"EXPIRATION_DT" DATE,"EMAIL" VARCHAR2(256 CHAR),"PW_QUESTION" VARCHAR2(256 CHAR),"PW_ANSWER" VARCHAR2(256 CHAR),"APPROVED_FLG" NUMBER(1,0),"LOCKED_OUT_FLG" NUMBER(1,0),"LAST_LOGIN_DT" DATE,"LAST_PW_CHANGED_DT" DATE,"LAST_LOCKOUT_DT" DATE,"FAILED_PW_ATTEMPT_CNT" NUMBER(6,0),"FAILED_PW_ATTEMPT_WINSTART" DATE,"FAILED_PW_ANSW_ATTEMPT_CNT" NUMBER(8,0),"FAILED_PW_ANSW_ATTEMPT_WINSTRT" DATE,"CREATED_BY_RID" NUMBER(10,0),"CREATED_DT" DATE,"MODIFIED_BY_RID" NUMBER(10,0),"MODIFIED_DT" DATE) TABLESPACE "USERS" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE ( INITIAL 131072 MAXEXTENTS 2147483645 MINEXTENTS 1 )
    CREATE UNIQUE INDEX "DEV"."XPKSTAFF" ON "DEV"."SYSTEM_USER_TB" ("RID" ) TABLESPACE "USERS"
    ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033033" PRIMARY KEY ("RID") USING INDEX "DEV"."XPKSTAFF" ENABLE VALIDATE )
    ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033032" CHECK ("RID" IS NOT NULL) ENABLE VALIDATE )
    CREATE TRIGGER "DEV"."SYSTEM_USER_TRG1"
    BEFORE
    INSERT
    ON "DEV"."SYSTEM_USER_TB"
    FOR EACH ROW
    begin
         select SYSTEM_USER_SEQ.nextval into :new.RID from dual;
    end;
    So, does anyone know if this is a bug? Could I be missing an option to add in the slashes to the generated code? Is there an option to not require the slashes? Could there be another way to execute these scripts?
    Seriously, I think I'm having deja vu from the last release of the Dev Tools: Generate Create Script creates scripts that won't run: ORA-00922: missing..
    ...except this time the documentation says I should be able to use the "Run" and "Run On" commands in the Oracle Database Project (see page 8): http://www.oracle.com/technology/tech/dotnet/pdf/ODT11_whatsnew.pdf
    null

    There are 2 issues in the generated script :
    1. Missing semicolons at the end of the create stmts
    2. Missing slashes
    Both of these fixes will be available in the ODT 11.1 release.

  • Issue with WSDL created for sender agreement

    Hi,
    Can you please help me why I am getting the erroe with WSDL that has been created from directory Sener agreement in PI 7.1 EHP1?
    My interface is a SOAP to file ASYNC scenario and we have been given 5 XSDs that are referencing one each other ,5 XSDs are imported successfully and referenced properly,no errors/issues found.
    Created all ESr and directory objects and I tried creating WSDL from sender agreement for my Source/outbound inteface that is created with XSDs in ESR.
    When I try to import WSDL into SOPA UI to validate ,the import process stuck for ever while trying to import "http://www.w3.org/2001/xml.xsd" and finally throws me error.
    After that I tried importing WSDL created in Directory into AltovaXML spy to created the webservice request,I am getting the following error""invalid XML Schema:"xml:lang" is already declared in the schema dcument C:|..my WSDL.
    Even our partner who wants to make Webservice calls using this WSDL,they are not able to develop their Webservices they are getting errors something related to schema not found /not defined etc.
    Please let me know,what might be the issue?I verified several times with my XSD imports and referencing properly and configuration objects.
    Thank you for your help in advance.
    Regards,
    Prem

    Hi Mark,
    I am not getting issue while displaying/Exporting  as WSDL in ESR.I am getting issue while trying import WSDL that is generated out of Service Interface into SOAP UI or Altova XML Spy.
    I don't think PI created the WSDl out of W3 standards.
    This is the error I am getting in XML Spy:
    File C:\Documents and Settings\Prem\Desktop\SI_XYZ_O.wsdl is not valid
         Invalid XML schema: ''xml:lang' is already declared.
              Error location: schema / attribute++
    and in SOAP UI:It is trying to import the WSDL and it stuck for ever while trying to import http://www.w3.org/2001/xml.xsd and never imprts the WSDL into SOAP UI project.
    Please let me know,if you have any ideas.
    Thank you,
    Prem.

  • Recent issues with already downloaded movies redownloading on thier own

    This appears to be a recent issue. But I have purchased and downloaded the following movies:
    How to Train Your Dragon
    How to Train Your Dragon 2
    ParaNorman
    These movies downloaded fine. No problems with them downloading or with playback. I have been having trouble downloading GOTG. (Nice to know I am not the only person.) This morning I start up iTunes and the above listed movies started downloading again. I have been having some issues with the recent versions of iTunes. Problems that I have never had before. Starting with iTunes 11 and continuing with iTunes 12, it seems to be losing track of what I have purchased. Ignoring what is currently in my Library and re-downloading already downloaded material. This cluttering up my Library with duplicate files I can't seem to get rid of. In some cases I am afraid to delete the duplicates. No telling what the impact will be.  Does anyone know a way to stop this? Or is this the new normal with iTunes. I had been considering limiting myself to just digital downloads. But with some of this strange behavior in the part of iTunes I will continue to purchase Blu-rays or DVDs for the foreseeable future.

    Have posted an updated version of the MST to my webspace here:
    http://homepage.ntlworld.com/minkus/shockwave/shockwave115606mst2.zip
    This new version fixes the following issues (changes to this version in bold):
    MsiInstaller repair & errors on first run as non-admin (removes 'AppData' directory entries)
    DCOM errors once Shockwave is installed (adds double quotes to the beginnning of LocalServer32 value)
    Incorrect TypeLib paths in the registry (fixed to use built-in [SystemFolder] property)
    Default CLSID description value missing (set to 'Shockwave ActiveX Control', as per the executable installer)
    Incorrect Shockwave 10 paths in the registry (fixed to use built-in [SystemFolder] property)
    Misspelt 'OptionalComponets' registry key (renamed to 'OptionalComponents')
    Missing .dcr, .dir, .dxr Content Type registry values (included in the executable installer)
    Fixed incorrect AppID registry key (set to use installer's [VERSION] variable)
    Removed 'Launch SWDNLD.exe' shortcut created in Programs subfolder (people don't want this - see here)
    I have tested this on my network and it all seems to work fine. Unfortunately my original plan to use the executable installer didn't work out as it does not include the Shockwave 10 compatibility components described here and here, so it looks like I'll have to keep this MST file up to date with the latest versions until Adobe fix the problems themselves...
    If you want to see the changes that I have made, load up Adobe's 11.5.6.606 MSI file in Orca, then use Transform / Apply Transform to apply the MST, and look for the entries in green.
    Please post any feedback to this thread, and I will try to respond if I can help!
    Chris Hill

  • Delay issue with mighty mouse and macbook pro. help?

    Connected but delayed in movement. I am connected to an HD tv via HDMI and only a delay issue on the tv monitor. The mouse responds as normal on the laptop screen if I have it open, but on the TV it is delayed. Any clue as to what might be wrong? I am running HDMI to a converter for the mini display port and have seen it work many times with no delay. I have changed the batteries and reconnected/restarted the computer and the mouse numerous times. 

    Hey there, I'm on the forums because I can't get my wireless mouse to connect to my new MacBook Pro either (just got it yesterday). Bluetooth Device Manager seems to "see" it when it searches, but insists it can't connect to it, saying either "device not found" (which is ridiculous, since it's right up there in the list) or "cannot find the necessary services." Yet I cannot find anything definitive on the tubes to say that the two don't work together. Anyone else have any ideas for us??
    I should mention I changed the batteries b/c at first I thought that's all it was. When it didn't work I brought it to a 2009 MacBook Pro, and that one connected no problem ::shaking head::

  • New HH3 - Issues with Kodak Printer and iPhone 3GS

    Hello,
    Here is the background:
    Previously had a D-Link DSL-G624M router and everything connected wirelessly. This included 2 laptops, Kodak ESP 5250 Printer and iPhone 3GS. Router broadcasting on channel 6 (locked).
    Since upgrading to Infinity replaced the D-Link with a HH3. Laptops connect fine but have issues with other wireless devices.
    iPhone: Seems to lose internet (not necessarily wireless connection though) intermittently. The phone remains connected to the HH3 and can be seen in the DHCP table and Home Network screens. The iPhone also reports that it is connected to the HH3. However, when attempting to access the internet using either Safari or apps it doesn't work. This can be fixed by forgetting the network and re-joining or turning Airplane Mode on and then off.
    Kodak ESP5250 Printer: This connects fine to the HH3 and remains in the DHCP table and Home Network with the correct IP Address. Laptop A is able to connect and print successfully. However, after putting the laptop into sleep mode and re-waking it it is unable to Print. The Printer is still connected to the HH3 and laptop claims it is 'Ready' but unable to print. The only way i have found to fix this is to re-install the entire Printer software!! However, Laptop B does not have this problem and can be put into Sleep mode, Hibernate or restart and the printer remain connected. I do not think it is a firewall issue as able to connect until re-waking from sleep.
    You're probably thinking the same as me that this sounds like hardware issues and not the HH3. Maybe coincidence that it started happening after changing to HH3. Maybe something wrong with the iPhone or Laptop A and/or Printer?!? Tried setting a manual channel on the HH3 as suggested by other posts but this had no effect. (Used inSSIDer to determine best channel). Also increased the IP Address lease time from 1 Day to 21 Days - but again no difference.
    Current situation: Connected the D-Link router to the HH3 using Ethernet cable. Disabled DHCP and DNS on the D-Link router and kept SSID different. Now connected all devices to the D-Link router and nothing to the HH3 and everything is working as it did previously. The iPhone remains stable and the Kodak printer remains connected to both Laptops after re-waking from Sleep Mode.
    I haven't yet contacted BT but i'm leaning towards it being a dodgy HH3. Anyone have any suggestions??
    Thanks,
    Martyn...

    For starters, there's nothing wrong with your Iphone or Kodak prn. The issue is the HH3
    I had a very similar issue connecting iMac, iPad, Macbook Pro, iPhone, Thinkpad and Canon prn via wireless to the HH3... Lots of disconnections, devices that couldn't log in, very low wireless speeds, printer not recognized, etc,etc
    I went mad, pretty much did the same things as you did: inSSIDer, changing channels, re-installing whole softw drv !, reorientating HH3 position, manually assigning IPs and channels... nothing would seem to work!
    Then I connected a Netgear router to HH3 via ethernet cable -like you did- and suddenly everything seemed to go back to normal. Here's what I found out after much head knocking:
    1) The issue is the HH3, not that it's faulty but simply put it can't deal with lots of wireless traffic. The minute you connect several devices it gets clogged up
    2) HH3 seem not to recognize WiFI printers that have a 'static' IP (not sure why)...  this was a nightmare
    3) if you have many devices connected, HH3 doesn't  seem to 'like' Apple devices or wifi Airport powered (not sure why). After sleep mode these device can't pick up IP over the air, and you need to manually renew DHCP leases. There are several reports about this in Apple forums.
    So here's what I did:
    1) I ditched the HH3
    2) I connected the Openreach router to a dual-band Netgear wndr3400 **cable** router (PPPoE connection)
    3) I re-installed the prn drv in USB mode and then added wifi printer in wifi mode while usb connected
    4) I created two-split WIFI networks; one in the channel 6/2.4Ghz frequency and another in the channels 44-48/5Ghz freq to which I assigned most devices (It seems BT Infinity wifi works best in 5Ghz channels)
    Results: all devices recognised & connected via WiFI, no disconnections, steady WIFI speed almost as fast as ethernet cable, wifi prn prints fine from all devices... No more WIFI connnectivity issues.
    I hope this helps, good luck
    (note: my current issue is that my profile dropped from 34/8 to 21/2 during testing phase)

  • New MBP issues with certain games

    I have a new post Feb 08 MBP. I have bought the Diablo and Starcraft Battle Chests, Fallout, Fallout 2, and Knights and Merchants. I have issues with all of them and these issues cannot be duplicated by owners of pre Feb 08 MBPs.
    The Diablo and Starcraft issue has been recognized by Blizzard and they are working with Apple:
    http://www.battle.net/forums/thread.aspx?FN=support&T=535843&P=1
    Reports to MacPlay about Knights and Merchants, Fallout and Fallout 2 have gone unanswered.
    Can any other new MBP owners confirm the Fallout or K&M issue?
    With Fallout I and II I have obvious graphical issues with the palette. K&M loads but I only get sounds, no window at all.
    If you have issues with Diablo II and Starcraft please post on the battle.net site above. Thanks!
    Message was edited by: Ogmios

    Hello all,
    This seems to be a problem! I wonder if it will be similar with the new iMacs that are coming out with this new processor!
    So yeah, when I load up Fallout 2 on my new Macbook Pro I get the weird graphics palette and on only one half of the screen. Seems a little phishy to me! I don't even know if there is a patch that could help! It SHOULD be solved my Rosetta or something . . . but if the new Pentyn architecture is faulty, it would have to be a recall, not a patch!
    Makes me a little nervous to tell you the truth!

  • File.copyTo - issues with copied Flash10 Project .app

    I'm currently working on a project which has functionality to export a selected number of slides to a Folder, complete with a Flash 10 .exe or .app to play the files with.
    I've been running into a major issue with copying the .app. Once the presentation has been exported from the Installed AIR app, the .app projector file will not open, it attempts to open and immediately closes again.
    Funnily enough, it works perfectly when outputting from the Flash IDE (coding in flex) in the debugger, the .app file is copied fine and it works perfectly. It's only when attempting from the installed AIR app.
    The code I have is:
    var originala:File = File.applicationDirectory.resolvePath(_app);
    var appX = "Presenter.app";
    var copya:File = file.resolvePath(dir+appX);
    originala.copyTo(copya);
    _trace.add("[FILE SYSTEM] Copy of Presenter.app is Package: " + copya.isPackage + ", if false, Projector will not work!");
    I originally thought it wasnt copying over the .app directory as a package, but it seems to, so that was the reason for the trace.
    I've even bought a copy of CS5 to see if the issue is resolved with the AIR 2.0 RC, it's downloading now.
    I have no idea why this isn't working and I am on a tight deadline.
    Any one got any ideas?
    Thanks.
    Joe K

    OK, I really need help with this...
    I have included a .zip (link below) which has a small test bed AIR app including all source...
    When running installed AIR app (Copy doesn't work):
    isDebugger: false
    playerType: Desktop
    version: MAC 10,1,53,64
    When previewing from .fla in Flash IDE (Copy does work):
    isDebugger: true
    playerType: Desktop
    version: MAC 10,0,12,36
    Please please please help!
    http://rapidshare.com/files/397795116/Copy_Tester.zip.html
    [EDIT] So it looks like I just can't copy from the applicationDirectory. But I dont want to have to include extra files with the installer I wanted to include it in the installer. Is there any way for me to do this?
    [EDIT 2] I have tried a extracting a .zip included in the package with FZip and ZipLib, both produce the same results, the .app doesnt work.

  • "New" IE8 Issues with Apple Site?

    As a diehard PC user who just recently purchased an iPod Touch, I am spending a lot more time on the Apple site than in the past. I am having nothing but problems with the main Apple site when I access via IE8. The main page takes forever to load up, then mouse clicks go unnoticed or take forever to respond to. Once I get beyond the Apple home page, things start to improve but a couple of odd errors from time to time. For instance, I was accessing this forum via Firefox, then decided that I wanted to do the same side by side with IE8. Obviously, no issues with any Apple site and Firefox whatsoever. On IE8, when I went to "Login", even after logging out on Firefox, it said that the page didn't exist.
    If I didn't know better, I would think that Microsoft and Apple don't get along All kidding aside, do I have to spend the rest of my life accessing Apple's Web site via Firefox, or can I use IE8 like I do for every other site that I access (yes, I have no other problems with any other sites that I access via IE8, except for Apple's).
    Thanks.

    mlb32704 wrote:
    As a diehard PC user .... Obviously, no issues with any Apple site and Firefox whatsoever.
    So now you get a feel for how the rest of us live, eh?
    I understand how you feel, but Apple clearly doesn't give any consideration to all the hacks required to make Internet Explorer behave. They just code to the web standards that were published about 10 years ago. Having done a moderate amount of web development I can tell you that Firefox and Safari render and behave virtually identically. All version of Internet Explorer require some sort of hacking to make work. I have three separate CSS files I include with my web sites (ie6.css, ie7.css, and ie8.css) that contain distinct sets of hacks to make pages that look perfect in Safari and Firefox look somewhat decent in IE. You would think that the number of hacks would decrease as the IE version number increases, wouldn't you? Sorry. Each version has its own distinct bugs. If there is any web site in the world that shouldn't have to deal with that, it is apple.com. If you don't want to use Firefox, try Safari for Windows.

  • Issue with rescale and cropping in Captivate 5

    I have an issue with cropping when rescaling. I have installed the December patch and am still having a problem. 
    1. I imported a PPT in 800x600.
    2. I rescaled to 900x600, deselecting Maintain Aspect Ratio, and selecting to Keep project the same size and position the project Top Right. This leaves a white border 100 pixels along the left side of the project.
    3. Saved the project.
    4. Opened project and selected to rescale.
    5. Deselected Maintain Aspect Ratio and changed the Width back to 800
    6. Selected the Crop radio button.
    7. Clicked Next.
    8. Moved the crop area to the right to select the PPT and eliminate the white border on the left.
    9. Click Apply to All Slides.
    10. Click Finish.
    The project rescales and is now 800x600, but it retains the white border on the left and distorts the slide image since it is now fitting in a 700x600 space. It seems to have ignored the Crop part of the task and just resized the image as is.
    Has anyone else had this issue and know a workaround? I have submitted a bug but have not heard back and we have an immediate need to resize a project. Without a fix, we need to recreate the project in 800x600 to continue which will take a lot of time.
     

    Hi,
    bit off topic perhaps, but have a look at my blog post about Knockout master slide, where I gave some guidelines for rescaling projects
    Create and use a knockout master slide
    Lilybiri

Maybe you are looking for