New deploy child domain certificate server didn't publish root trust certificate to the client

Child domain certificate didn't install into child domain workstation.
https://support.microsoft.com/en-us/kb/281271?wa=wsignin1.0
Certification Authority configuration to publish certificates in Active Directory of trusted domain
Any advise?
Thanks.

Hi,
>>New deploy child domain certificate server didn't publish root trust certificate to the client
Is this an enterprise root CA or standalone CA?
If it is an enterprise root CA, it will automatically use Group Policy to propagate its certificate to the Trusted Root Certification Authorities certificate store for all users and computers in the domain. If it is an standalone CA, we can configure GPO
to distribute the certificate.
Regarding how to use policy to distribute certificates, the following article can be referred to for more information.
Use Policy to Distribute Certificates
https://technet.microsoft.com/en-us/library/cc772491.aspx
We can run command gpupdate/force to immediately update group policy and then we can refresh the certificates in certmgr.msc to see if the certificate will come up.
Besides, for certificate questions, we can also ask for suggestions in the following forum.
Security
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserversecurity
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

PROBLEM ACCESSING OWA FROM THE INTERNET TO THE CHILD DOMAIN MAIL SERVER.

Dear All,
Referring to the forum that I sent to the group sometime back which was successfully sorted. I have received a call from the users in the child domain, where they are not able to access OWA from the Internet. below is the error they are getting
Log OffOutlook Web Access could not connect to Microsoft Exchange. If the problem continues,
contact technical support for your organization.Click here to continue working.RequestUrl:
https://mail.mydomain.com:443/owa/forms/basic/BasicReadMessage.aspx?ae=Item&t=IPM.Note&id=
RgAAAADaPzSfz396RJbcAffXnu8fBwCXRKkddfkskskZ0zGXAAAAACF9AACXRKFoskTMSrrSWkkksAAAACgcAAAJUser: mynameEX Address: /o
=First Organization domain/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=myname1SMTP Address:
[email protected]
version: 8.3.348.2ExceptionException type:Microsoft.Exchange.Data.Storage.ConnectionFailedTransientExceptionException
message: Cannot open mailbox /o=First Organization domain/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/
cn=Recipients/cn=myname1.Call stackMicrosoft.Exchange.Data.Storage.ConnectionCachePool.OpenMailbox(String serverDn,
String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, Object identity, ConnectFlag connectFlag, OpenStoreF
lag openStoreFlag, CultureInfo cultureInfo, String clientInfoString, Boolean secondTry)Microsoft.Exchange.Data.Storage.
ConnectionCachePool.OpenMailbox(String serverDn, String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, Object
identity, ConnectFlag connectFlag, OpenStoreFlag openStoreFlag, CultureInfo cultureInfo, String clientInfoString,
Boolean secondTry)Microsoft.Exchange.Data.Storage.MailboxSession.Connect()Microsoft.Exchange.Clients.Owa.Core.
UserContext.get_MailboxSession()Microsoft.Exchange.Clients.Owa.Basic.OwaForm.OnLoad(EventArgs e)Microsoft.Exchange.
Clients.Owa.Basic.ReadMessage.OnLoad(EventArgs e)System.Web.UI.Control.LoadRecursive()System.Web.UI.Page.
ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)Inner
ExceptionException type: Microsoft.Mapi.MapiExceptionNetworkErrorException message: MapiExceptionNetworkError:
Unable to make connection to the server. (hr=0x80004005, ec=2423) Diagnostic context: ...... Lid: 13720 dwParam:
0x6BA Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6BA Msg: EEInfo: NumberOfParameters: 0 Lid: 16280 dwParam: 0x6BA
Msg: EEInfo: ComputerName: n/a Lid: 8600 dwParam: 0x6BA Msg: EEInfo: ProcessID: 18036 Lid: 12696 dwParam: 0x6BA Msg:
EEInfo: Generation Time: 2014-12-12 12:01:11:86 Lid: 10648 dwParam: 0x6BA Msg: EEInfo: Generating component: 18 Lid:
14744 dwParam: 0x6BA Msg: EEInfo: Status: 11004 Lid: 9624 dwParam: 0x6BA Msg: EEInfo: Detection location: 320 Lid:
13720 dwParam: 0x6BA Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6BA Msg: EEInfo: NumberOfParameters: 1 Lid: 8856
dwParam: 0x6BA Msg: EEInfo: prm[0]: Unicode string: MX4 Lid: 19778 Lid: 27970 StoreEc: 0x977 Lid: 17730 Lid: 25922
StoreEc: 0x977 Call stackMicrosoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, Int32 ec,
DiagnosticContext diagCtx)Microsoft.Mapi.ExRpcConnection.Create(ConnectionCache connectionCache,
ExRpcConnectionCreateFlag createFlags, ConnectFlag connectFlags, String serverDn, String userDn, String user,
String domain, String password, String httpProxyServerName, Int32 ulConMod, Int32 lcidString, Int32 lcidSort,
Int32 cpid, Int32 cReconnectIntervalInMins, Int32 cbRpcBufferSize, Int32 cbAuxBufferSize)
Microsoft.Mapi.ConnectionCache.OpenMapiStore(String mailboxDn, Guid mailboxGuid, Guid mdbGuid,
ClientIdentityInfo clientIdentity, String userDnAs, OpenStoreFlag openStoreFlags,
CultureInfo cultureInfo, String applicationId)Microsoft.Mapi.ConnectionCache.
OpenMailbox(String mailboxDn, Guid mailboxGuid, Guid mdbGuid, WindowsIdentity
windowsIdentityAs, String userDnAs, OpenStoreFlag openStoreFlags, CultureInfo cultureInfo,
String applicationId)Microsoft.Exchange.Data.Storage.ConnectionCachePool.OpenMailbox(String
serverDn, String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, Object identity,
ConnectFlag connectFlag, OpenStoreFlag openStoreFlag, CultureInfo cultureInfo, String clientInfoString,
Boolean secondTry)
Your Usual support will b greatly appreciated.
Regards
Michael

Hello,
Edge server is not used for client comunication (OWA, ActiveSync etc). You should configure firewall rules to point to your CAS server or (more secure method) reverse proxy.
Hope it helps,
Adam
www.codetwo.com
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others
find the answer faster.

Why can the users in one child domain logon to computers in a different child domain in Server 2012 R2?

I have setup a test system. It has a domain with 2 child domains. DomainA.xyz.com has users and workstations. DomainB.xyz.com is a resource domain and has servers. wyx.com is for IT administration.
Users in domainA can logon to the domainB computers. I searched to find out why it was so. I found a "NT AUTHORITY\INTERACTIVE" entry in the local users group that enables this.
This is rather confusing. 1. When a user enters his credentials, he is not logged on and therefore would not be "INTERACTIVE" at that time. 2. If everybody that signs on a computer is interactive, then does that mean
everyone in the forest can sign on?
So my issue is: Can I delete the "INTERACTIVE" entry in the local users group and not cause any problems? I want to protect the resource domain from users signing on to them and give them access to the resources they need.

Hi,
The Interactive group includes all users that have logged on locally.
In addition, it is not recommended to remove the
interactive group from the local user group since it would cause all kinds of problems. For more detailed information, please refer to the similar thread and link below:
Interactive
group
Staring
at a blank desktop, due to Interactive missing from Users group
Best regards,
Susie

HT4519 after setting up a new account to my SMTP server and saving info how it goes to the account info and not to my mail. ta suzie

After setting up a new account to my SMTP server and saving info how do I open it? When I touch on my new account bigpond.com it goes to the account info and not to my mail

To read your emails you need to come out of Settings and go into the separate Mail app from on your homescreen :
The Settings 'app' is for defining settings for various apps and for the iPad as a whole.

Published to folder iWeb site always using Times New Roman for every piece of text in published site and not showing the original text style used when building the site in iWeb.

Dear All
Hello from rainy, windy and cold North East England! I need to ask for your help as I'm new to iMac and new to iWeb and it's frustrating the life out of me!
I'm just beginning to build a website for my business. Previously, I used Frontpage, but it's been that long since I used it - I've forgotten half of it and so, I'm using iWeb instead as it's silly to use an iMac for business but a PC laptop for the website design.
I've got the background image I want on the homepage (beautiful image of a rain forest - even if I do say so myself!) and I'm trying to enter a text box at the lower half of the screen, in the centre of the page saying 'click to enter'. I type in the text, I edit it so as to change it to the font style of my company (Gill sans MT) and then I publish the site to a folder so that I can see what it would look like when viewed via the internet. When I do this - the font changes size to a bog standard size of 'so small you need a magnifying glass to read it', it changes colour from black to purple (which looks disgusting) and it changes font style from Gill Sans MT to Times New Roman.
It doesn't matter if I delete the entire site and start again or delete the text box, and insert a new one. I've googled this subject until I'm blue in the face and I can't find an answer - can anyone suggest anything that will help?
Many thanks for your help,
Best wishes,
Sean.

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
NOTE: If you don't use Web Safe Fonts any computer that does not have that font installed will substitute another font for it and change the look and feel of the web page.
So it's safest to use one of those web safe fonts.
OT

The email server didn't recognize your username/password combination., The email server didn't recognize your username/password combination., The email server didn't recognize your username/password combination.

I have tried many times to send photo's via email in iphoto. I have deleted email accounts and started over. Double checked accounts and passwords and still no luck with iCloud or yahoo accounts. Can someone please assist me with this issue?

Contact your email tech support and have them walk you through the set up
Or set mail as the email client which I believe is better
LN

Having trouble promoting a server to a Child Domain Controller

Hello,
I am having promoting a 2012 server that's already a member of a domain to a child domain controller. All of the prereq's are met. When I try to promote it, it shows the steps being processed. When it begins to replicate the parent domain's
database, it runs all night and never completes. Any Idea what's going on?
Thanks
John G.
John Grace

Hello,
Just to let you know I can ftp, telnet, and map drives to gptsserver1.gpts.biz from gptsserver2.gpts.biz but can't promote gptsserver2.gpts.biz to a child domain controller. Any help is appreciated.
Here is the contents of dcpromo.log from gptsserver2.gpts.biz:
08/13/2014 21:14:32 [INFO] Promotion request for domain controller of new domain
08/13/2014 21:14:32 [INFO] DnsDomainName gpts2.gpts.biz
08/13/2014 21:14:32 [INFO] FlatDomainName GPTS2
08/13/2014 21:14:32 [INFO] SiteName Default-First-Site-Name
08/13/2014 21:14:32 [INFO] SystemVolumeRootPath C:\Windows\SYSVOL
08/13/2014 21:14:32 [INFO] DsDatabasePath C:\Windows\NTDS, DsLogPath C:\Windows\NTDS
08/13/2014 21:14:32 [INFO] ParentDnsDomainName gpts.biz
08/13/2014 21:14:32 [INFO] ParentServer gptsserver1.gpts.biz
08/13/2014 21:14:32 [INFO] Account (NULL)
08/13/2014 21:14:32 [INFO] Options 5243072
08/13/2014 21:14:32 [INFO] Validate supplied paths
08/13/2014 21:14:32 [INFO] Validating path C:\Windows\NTDS.
08/13/2014 21:14:32 [INFO] Path is a directory
08/13/2014 21:14:32 [INFO] Path is on a fixed disk drive.
08/13/2014 21:14:32 [INFO] Validating path C:\Windows\NTDS.
08/13/2014 21:14:32 [INFO] Path is a directory
08/13/2014 21:14:32 [INFO] Path is on a fixed disk drive.
08/13/2014 21:14:32 [INFO] Validating path C:\Windows\SYSVOL.
08/13/2014 21:14:32 [INFO] Path is on a fixed disk drive.
08/13/2014 21:14:32 [INFO] Path is on an NTFS volume
08/13/2014 21:14:32 [INFO] Child domain creation -- check the new domain name is child of parent domain name.
08/13/2014 21:14:32 [INFO] Domain Creation -- check that the flat name is unique.
08/13/2014 21:14:42 [INFO] Start the worker task
08/13/2014 21:14:42 [INFO] Request for promotion returning 0
08/13/2014 21:14:42 [INFO] Using supplied domain controller: gptsserver1.gpts.biz
08/13/2014 21:14:42 [INFO] Using supplied site: Default-First-Site-Name
08/13/2014 21:14:42 [INFO] Forcing time sync
08/13/2014 21:14:42 [INFO] Forcing a time sync with gptsserver1.gpts.biz
08/13/2014 21:14:42 [INFO] Reading domain policy from the domain controller gptsserver1.gpts.biz
08/13/2014 21:14:42 [INFO] Stopping service NETLOGON
08/13/2014 21:14:42 [INFO] Stopping service NETLOGON
08/13/2014 21:14:42 [INFO] ControlService(STOP) on NETLOGON returned 0(gle=1062)
08/13/2014 21:14:42 [INFO] Exiting service-stop loop after service NETLOGON entered STOPPED state
08/13/2014 21:14:42 [INFO] StopService on NETLOGON returned 0
08/13/2014 21:14:42 [INFO] Configuring service NETLOGON to 1 returned 0
08/13/2014 21:14:42 [INFO] Stopped NETLOGON
08/13/2014 21:14:42 [INFO] Creating the System Volume C:\Windows\SYSVOL
08/13/2014 21:14:42 [INFO] Deleting current sysvol path C:\Windows\SYSVOL
08/13/2014 21:14:43 [INFO] Preparing for system volume replication using root C:\Windows\SYSVOL
08/13/2014 21:14:43 [INFO] Created the system volume
08/13/2014 21:14:43 [INFO] Copying initial Directory Service database file C:\Windows\system32\ntds.dit to C:\Windows\NTDS\ntds.dit
08/13/2014 21:14:43 [INFO] Installing the Directory Service
08/13/2014 21:14:43 [INFO] Calling NtdsInstall for gpts2.gpts.biz
08/13/2014 21:14:43 [INFO] Starting Active Directory Domain Services installation
08/13/2014 21:14:43 [INFO] Validating user supplied options
08/13/2014 21:14:43 [INFO] Determining a site in which to install
08/13/2014 21:14:43 [INFO] Examining an existing forest...
08/13/2014 21:14:43 [INFO] Configuring the local computer to host Active Directory Domain Services
08/13/2014 21:14:44 [INFO] EVENTLOG (Informational): NTDS General / Service Control : 1094
Software write caching for the following disk drive has been disabled to prevent possible data loss during system failures such as power outages or hardware component failures that can cause a sudden shutdown of the system. The disk drive that stores Active
Directory Domain Services log files is the only drive affected by this change.
Disk drive:
c:
08/13/2014 21:14:55 [INFO] EVENTLOG (Informational): NTDS General / Internal Configuration : 2120
This Active Directory Domain Services server does not support the Recycle Bin. Deleted objects may be undeleted, however, when an object is undeleted, some attributes of that object may be lost. Additionally, attributes of other objects that refer to
the object being undeleted may also be lost.
08/13/2014 21:14:56 [INFO] Replicating the schema directory partition
08/13/2014 21:14:56 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 1963
Internal event: The following local directory service received an exception from a remote procedure call (RPC) connection. Extensive RPC information was requested. This is intermediate information and might not contain a possible cause.
Process ID:
488
Reported error information:
Error value:
Access is denied. (5)
directory service:
gptsserver1.gpts.biz
Extensive error information:
Error value:
Access is denied. 5
directory service:
gptsserver2
Additional Data
Internal ID:
5000dfc
08/13/2014 21:14:56 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 1961
Internal event: This log entry is a continuation from the preceding extended error information entry on the following error and directory service.
Extended information:
Error value:
Access is denied. (5)
directory service:
gptsserver2
Supplemental information:
Detection location:
1461
Generating component:
RPC Runtime
Time at directory service:
2014-08-14 04:14:56
Additional Data
Error value:
Access is denied. (5)
08/13/2014 21:14:56 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 2839
Internal event: This log entry is a continuation from the preceding extended error information entry.
Extended information:
Extended Error Parameters:
0
Parameter 1:
(NULL)
Parameter 2:
(NULL)
Parameter 3:
(NULL)
Parameter 4:
(NULL)
Parameter 5:
(null)
Parameter 6:
(null)
Parameter 7:
(null)
08/13/2014 21:14:56 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 1962
Internal event: The local directory service received an exception from a remote procedure call (RPC) connection. Extended error information is not available.
directory service:
gptsserver1.gpts.biz
Additional Data
Error value:
Access is denied. (5)
08/13/2014 21:14:56 [INFO] EVENTLOG (Error): NTDS Replication / Setup : 1125
The Active Directory Domain Services Installation Wizard (Dcpromo) was unable to establish connection with the following domain controller.
Domain controller:
gptsserver1.gpts.biz
Additional Data
Error value:
5 Access is denied.
08/13/2014 21:15:04 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 1963
Internal event: The following local directory service received an exception from a remote procedure call (RPC) connection. Extensive RPC information was requested. This is intermediate information and might not contain a possible cause.
Process ID:
488
Reported error information:
Error value:
Access is denied. (5)
directory service:
gptsserver1.gpts.biz
Extensive error information:
Error value:
Access is denied. 5
directory service:
gptsserver2
Additional Data
Internal ID:
5000dfc
08/13/2014 21:15:04 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 1961
Internal event: This log entry is a continuation from the preceding extended error information entry on the following error and directory service.
Extended information:
Error value:
Access is denied. (5)
directory service:
gptsserver2
Supplemental information:
Detection location:
1461
Generating component:
RPC Runtime
Time at directory service:
2014-08-14 04:15:04
Additional Data
Error value:
Access is denied. (5)
08/13/2014 21:15:04 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 2839
Internal event: This log entry is a continuation from the preceding extended error information entry.
Extended information:
Extended Error Parameters:
0
Parameter 1:
(NULL)
Parameter 2:
(NULL)
Parameter 3:
(NULL)
Parameter 4:
(NULL)
Parameter 5:
(null)
Parameter 6:
(null)
Parameter 7:
(null)
08/13/2014 21:15:04 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 1962
Internal event: The local directory service received an exception from a remote procedure call (RPC) connection. Extended error information is not available.
directory service:
gptsserver1.gpts.biz
Additional Data
Error value:
Access is denied. (5)
08/13/2014 21:15:04 [INFO] EVENTLOG (Error): NTDS Replication / Setup : 1125
The Active Directory Domain Services Installation Wizard (Dcpromo) was unable to establish connection with the following domain controller.
Domain controller:
gptsserver1.gpts.biz
Additional Data
Error value:
5 Access is denied.
08/13/2014 21:15:20 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 1963
Internal event: The following local directory service received an exception from a remote procedure call (RPC) connection. Extensive RPC information was requested. This is intermediate information and might not contain a possible cause.
Process ID:
488
Reported error information:
Error value:
Access is denied. (5)
directory service:
gptsserver1.gpts.biz
Extensive error information:
Error value:
Access is denied. 5
directory service:
gptsserver2
Additional Data
Internal ID:
5000dfc
08/13/2014 21:15:20 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 1961
Internal event: This log entry is a continuation from the preceding extended error information entry on the following error and directory service.
Extended information:
Error value:
Access is denied. (5)
directory service:
gptsserver2
Supplemental information:
Detection location:
1461
Generating component:
RPC Runtime
Time at directory service:
2014-08-14 04:15:20
Additional Data
Error value:
Access is denied. (5)
08/13/2014 21:15:20 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 2839
Internal event: This log entry is a continuation from the preceding extended error information entry.
Extended information:
Extended Error Parameters:
0
Parameter 1:
(NULL)
Parameter 2:
(NULL)
Parameter 3:
(NULL)
Parameter 4:
(NULL)
Parameter 5:
(null)
Parameter 6:
(null)
Parameter 7:
(null)
08/13/2014 21:15:20 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 1962
Internal event: The local directory service received an exception from a remote procedure call (RPC) connection. Extended error information is not available.
directory service:
gptsserver1.gpts.biz
Additional Data
Error value:
Access is denied. (5)
08/13/2014 21:15:20 [INFO] EVENTLOG (Error): NTDS Replication / Setup : 1125
The Active Directory Domain Services Installation Wizard (Dcpromo) was unable to establish connection with the following domain controller.
Domain controller:
gptsserver1.gpts.biz
Additional Data
Error value:
5 Access is denied.
08/13/2014 21:15:52 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 1963
Internal event: The following local directory service received an exception from a remote procedure call (RPC) connection. Extensive RPC information was requested. This is intermediate information and might not contain a possible cause.
Process ID:
488
Reported error information:
Error value:
Access is denied. (5)
directory service:
gptsserver1.gpts.biz
Extensive error information:
Error value:
Access is denied. 5
directory service:
gptsserver2
Additional Data
Internal ID:
5000dfc
08/13/2014 21:15:52 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 1961
Internal event: This log entry is a continuation from the preceding extended error information entry on the following error and directory service.
Extended information:
Error value:
Access is denied. (5)
directory service:
gptsserver2
Supplemental information:
Detection location:
1461
Generating component:
RPC Runtime
Time at directory service:
2014-08-14 04:15:52
Additional Data
Error value:
Access is denied. (5)
08/13/2014 21:15:52 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 2839
Internal event: This log entry is a continuation from the preceding extended error information entry.
Extended information:
Extended Error Parameters:
0
Parameter 1:
(NULL)
Parameter 2:
(NULL)
Parameter 3:
(NULL)
Parameter 4:
(NULL)
Parameter 5:
(null)
Parameter 6:
(null)
Parameter 7:
(null)
08/13/2014 21:15:52 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 1962
Internal event: The local directory service received an exception from a remote procedure call (RPC) connection. Extended error information is not available.
directory service:
gptsserver1.gpts.biz
Additional Data
Error value:
Access is denied. (5)
08/13/2014 21:15:52 [INFO] EVENTLOG (Error): NTDS Replication / Setup : 1125
The Active Directory Domain Services Installation Wizard (Dcpromo) was unable to establish connection with the following domain controller.
Domain controller:
gptsserver1.gpts.biz
Additional Data
Error value:
5 Access is denied.
08/13/2014 21:16:56 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 1963
Internal event: The following local directory service received an exception from a remote procedure call (RPC) connection. Extensive RPC information was requested. This is intermediate information and might not contain a possible cause.
Process ID:
488
Reported error information:
Error value:
Access is denied. (5)
directory service:
gptsserver1.gpts.biz
Extensive error information:
Error value:
Access is denied. 5
directory service:
gptsserver2
Additional Data
Internal ID:
5000dfc
08/13/2014 21:16:56 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 1961
Internal event: This log entry is a continuation from the preceding extended error information entry on the following error and directory service.
Extended information:
Error value:
Access is denied. (5)
directory service:
gptsserver2
Supplemental information:
Detection location:
1461
Generating component:
RPC Runtime
Time at directory service:
2014-08-14 04:16:56
Additional Data
Error value:
Access is denied. (5)
08/13/2014 21:16:56 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 2839
Internal event: This log entry is a continuation from the preceding extended error information entry.
Extended information:
Extended Error Parameters:
0
Parameter 1:
(NULL)
Parameter 2:
(NULL)
Parameter 3:
(NULL)
Parameter 4:
(NULL)
Parameter 5:
(null)
Parameter 6:
(null)
Parameter 7:
(null)
08/13/2014 21:16:56 [INFO] EVENTLOG (Error): NTDS Replication / DS RPC Client : 1962
Internal event: The local directory service received an exception from a remote procedure call (RPC) connection. Extended error information is not available.
directory service:
gptsserver1.gpts.biz
Additional Data
Error value:
Access is denied. (5)
08/13/2014 21:16:56 [INFO] EVENTLOG (Error): NTDS Replication / Setup : 1125
The Active Directory Domain Services Installation Wizard (Dcpromo) was unable to establish connection with the following domain controller.
Domain controller:
gptsserver1.gpts.biz
Additional Data
Error value:
5 Access is denied.
John Grace

Need help with process for installation of DNS when establishing a child domain in AD forest using Windows Server 2012

Additional guidance is needed regarding process for configuring DNS and for configuring the server Network settings (IPv4 properties) for installing a child domain. For example, when installing the Root domain, it is recommended to install DNS when installing
the AD on the forest root. This ensures the proper records are added to DNS for the forest during DC promo. However, when installing the child domain, I'm unsure if a child-domain hosted DNS needs to be pre-installed prior to the child domain install and dcpromo
or included in the child domain install.
Second, there is conflicting guidance as to how to set IPV4 properties for the net interface when installing child-domain DNS. Should primary DNS address be 127.0.0.1 or the address of the Root domain DNS? or both?
Thanks

Additional guidance is needed regarding process for configuring DNS and for configuring the server Network settings (IPv4 properties) for installing a child domain. For example, when installing the Root domain, it is recommended to install DNS when installing
the AD on the forest root. This ensures the proper records are added to DNS for the forest during DC promo. However, when installing the child domain, I'm unsure if a child-domain hosted DNS needs to be pre-installed prior to the child domain install and dcpromo
or included in the child domain install.
Second, there is conflicting guidance as to how to set IPV4 properties for the net interface when installing child-domain DNS. Should primary DNS address be 127.0.0.1 or the address of the Root domain DNS? or both?
Thanks

Error creating new Open Directory domain

The wizard for creating a new Open Directory domain in Server.app on Mountain Lion responds with the following error message:
     "An error occurred while configuring My Server as a directory server. Please check your network configuration and try again."
Not very helpful. How do find out what the actual error is?
Thanks.

Can anyone translate these log messages?
Aug 12 05:22:26 myhost.mydomain.com kdc[60240]: label: default
Aug 12 05:22:26 myhost.mydomain.com kdc[60240]:         dbname: od:/Local/Default
Aug 12 05:22:26 myhost.mydomain.com kdc[60240]:         mkey_file: /var/db/krb5kdc/m-key
Aug 12 05:22:26 myhost.mydomain.com kdc[60240]:         acl_file: /var/db/krb5kdc/kadmind.acl
Aug 12 05:22:26 myhost com.apple.launchd[1] (com.apple.Kerberos.kpasswdd[60241]): Exited: Killed: 9
Aug 12 05:22:26 myhost com.apple.launchd[1] (com.apple.Kerberos.kpasswdd): Throttling respawn: Will start in 10 seconds
Aug 12 05:22:26 myhost com.apple.launchd[1] (com.apple.Kerberos.kadmind[60242]): Exited: Killed: 9
Aug 12 05:22:26 myhost com.apple.launchd[1] (com.apple.Kerberos.kadmind): Throttling respawn: Will start in 10 seconds
Aug 12 05:22:26 myhost.mydomain.com kdc[60240]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
Aug 12 05:22:26 myhost.mydomain.com kdc[60240]: KDC started
Aug 12 05:22:26 myhost.mydomain.com Server[46707]: An error occurred while configuring My Mac Mini Server as a directory server:
        Error Domain=XSActionErrorDomain Code=-1 "A child action failed" UserInfo=0x7fb854a2ad90 {XSActionErrorActionsKey=(
            "Creating Open Directory master"
        ), NSLocalizedDescription=A child action failed}

Why, when I successfully connect to Server 2012 Essentials R2 via Anywhere Access does the Remote Desktop Connection use the self signed certificate for RDP instead of the SSL certificate I installed when I set up access anywhere?

Scenario:
Windows Server 2012 R2 Essentials
I purchased an SSL Cert from GoDaddy and I managed (after some challenges) to set up Anywhere access to use that new SSL Cert. I to rebooted the server and I am able to login to Anywhere Access vis https (using the SSL certificate) from PC, Mac and iOS.
So far so good.
The problem I am having is that when I click to launch a remote desktop connection to the server RDP connection wants to use the self signed SSL certificate of the server rather than the SSL Certificate I installed into Anywhere Access. As a result, I get
a security warning like this: "The identity of the remote computer cannot be verified. Do you want to connect anyway?"
The name in the certificate appears as ACME-SERVER.ACMEDOMAIN.local instead of the SSL Certificate I installed, which is
remote.acmedomain.com
If I lick to accept, RDP does work fine, it;s just using a self signed certificate. I want it to use the trusted certificate that I purchased and installed.
My guess is that there must be an additional step to tell Anywhere Access that when it generates the RDP session that it should use the cert? OR, is this just how it works?

Because....
the server does not have a 'trusted' certificate assigned to it.
Only the RDP Gateway has the trusted certificate for the external name.
If you want to remove that error, you have to do one of the following:
Make sure your domain uses a public top level domaim, and get a public trusted certificate for your server.
So, something like,
server.domain.publicdomain.com
Or,
Install that certificate on your remote computer so it is trusted.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Forest vs Child Domain

Hi Guys,
I'm thinking to separate the Development/Test environments from Acceptance/Production (DTAP). For this i don't want to make the separation only on the host level but i'm also thinking whether to choose to create a separate forest for Dev/Test or a child domain.
What are your recommendations? Child domain or different forest?

I'm thinking to separate the Development/Test environments from Acceptance/Production (DTAP). For
this i don't want to make the separation only on the host level but i'm also thinking whether to choose to create a separate forest for Dev/Test or a child domain.
What are your recommendations? Child domain or different forest?
By creating a child domain, you will be sharing the schema, configuration and some application partitions of your production environment. This means that operations like adding a new custom attribute would be global and replicated to all DCs in your forest.
For a better isolation, you simply need to create a new domain in a new forest. If you require access to some production resources or the reverse then you can create a trust relationship between both forests.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

IPHONE 4S incoming calls go directly to voice mail. This is a brand new replacement phone. Prior phone didn't have this problem

IPHONE 4S incoming calls go directly to voice mail. This is a brand new replacement phone. Prior phone didn't have this problem

Slide up from the bottom of your display to access the control panel.
Look for the button (should be at the top) that shows a crescent moon.
Tap that button. It should say "Do not Disturb: Off".
Then try it out and let us know if it worked.

HELP! how to get or download sun one certificate server 4.7

I had searched for a long while and had no found!
can anyone tell me how to buy or download sun one certificate server 4.7 ,netscape certificate server or iplanet CMS 4.2
thanks!

The SunOne certificate server was EOLed by Sun some time ago.
However, RedHat recently purchased Netscape Certificate server which is based on the same iPlanet codebase as SunOne but has numerous additional features including a smartcard and USB token management system.
Evaluation copies are available from redhat.com

Wireless bridge can't access windows certificate server

We have 10 Cisco 1200 wireless APs. The VLAN 1 use Windows certificate as authentication and VLAN 100 for the public. They work fine. We just bought two 1310 wireless bridges for outdoor use. We contact Cisco support for setup these two bridges. The wireless can receive the signal but can't logon. The IP is 169.254.x.x. The Certificate server receive Event ID 2 as below. The Cisco engineer can't make it work and he said the setup Windows IAS is not his expertise. Any suggestions how can we fix this issue?
Event Type: Warning
Event Source: IAS
Event Category: None
Event ID: 2
Date: 4/13/2007
Time: 7:41:21 PM
User: N/A
Computer: DEVICES
Description:
User blin was denied access.
Fully-Qualified-User-Name = chicagotech.net/Users/Bob Lin
NAS-IP-Address = 10.0.20.54
NAS-Identifier = Outdoor_1300_2
Called-Station-Identifier = <not present>
Calling-Station-Identifier = <not present>
Client-Friendly-Name = Root Bridge1
Client-IP-Address = 10.0.20.54
NAS-Port-Type = Async
NAS-Port = <not present>
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = All
Authentication-Type = PAP
EAP-Type = <undetermined>
Reason-Code = 66
Reason = The user attempted to use an authentication method that is not enabled on the matching remote access policy.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 ....

There are too many variables at play here, and too many unknowns...both on the server and client side...so it would be hard for anyone to offer suggestions other than the face you should talk to your system/network admins.

Bidirectional forest trust does not list child domains

Hi all,
we have this setup
DomainA-ForestA <--------> Forest B-DomainB
A bidirectional forest trust between ForestA and ForestB with domain-wide authentication. ForestA includes a domain DomainA and ForestB includes a domain DomainB. We're trying to authenticate via NTLM from a machine under DomainA to a resource under DomainB
by contacting a PDC in ForestA without success.
If we query a DC in DomainA for the trusts, we see that ForestB is listed, but ForestB.DomainB is not.
What could be the cause?
Thanks in advance

Hello Frank,
We're using NTLM because the customer wants it that way. The relevant part of the environment is:
domainA(root) under forestA
domainA1 under domainA (root) under forestB
domainB under forestB
Bidirectional forest trust. I do not know about transitivity. There are many other domains and forests which we do not care about in this instance.
We're using a Java library (JESPA) to query a PDC emulator in domainA for the trusts. A non-complete edited sample output is:
forestA={domain.netbios.name=forestA, domain.flags=0x0000001D, domain.trust.attributes=0x00000000, domain.dns.name=some.domain, domain.trust.type=2, objectGUID=, objectSid=},
forestB={domain.netbios.name=forestB, domain.flags=0x00000022, domain.trust.attributes=0x00000008, domain.dns.name=forestB.domain, domain.trust.type=2, objectGUID=, objectSid=},
forestA.domainA={domain.netbios.name=forestA.domainA, domain.flags=0x0000001D, domain.trust.attributes=0x00000000, domain.dns.name=forestA.domainA, domain.trust.type=2, objectGUID=, objectSid=},
forestB.domainB={domain.netbios.name=forestB.domainB, domain.flags=0x00000022, domain.trust.attributes=0x00000008, domain.dns.name=forestB.domainB, domain.trust.type=2, objectGUID=, objectSid=},
forestB.domainA={domain.netbios.name=forestB, domain.flags=0x00000022, domain.trust.attributes=0x00000008, domain.dns.name=forestB.domain, domain.trust.type=2, objectGUID=, objectSid=},
~={domain.netbios.name=forestA, domain.flags=0x0000001D, domain.trust.attributes=0x00000000, domain.dns.name=forestA.domainA, domain.trust.type=2, objectGUID=, objectSid=}
In the full sample there are many other domains not interesting in this scenario. You can see that forestB.domainA is listed as well as forestB.domainB but forestB.domainA1 is not.
We know this is not a library issue - and have already checked internally and with the library's vendor support - rather it's either a trust setup issue or PDC/DC configuration issue but do not know where the problem resides and how to solve it or work around
it.
In detail, the library we're using "sometimes may need to canonicalize a domain name (convert the NetBIOS name to the DNS name or visa versa). Unfortunately it is not uncommon for one or both names to be missing from trust information of foreign domains
retrieved through the local NETLOGON service. This seems to be particularly true of older networks where Windows NT domains were migrated and merged into an AD forest over time."
Although there's a workaround from the library side, it's not scalable enough to cover the entire network as we would need in the future.
Do you have any inputs? Is this solution from the thread you linked the only way to add that missing information?
You have to create a shortcut Trust to view the child Domain. For more information about shortcut trust,
please refer to the article below.
Since this is a production environment we would like to limit the impacts as much as possible.
Thank you again
Best regards

New deploy child domain certificate server didn't publish root trust certificate to the client

Similar Messages

Maybe you are looking for