New Depreciation Area after go-live
Hi Gurus
We are on ECC 6.0 in a production environment having gone live in April 2008.
We had gone live with only Depreciation Area 01. Other depreciation areas were de-activated. We have a requirement now to create a new depreciation area 15 for Income Tax Depreciation. We have activated the Dep Area 15 & did the necessary configuration including activation of group assets. We have run the program AFBN for creating new Dep Area. We have created a couple of assets which are also working fine.
However, when we try to update the depreciation values for assets (using AS92) which are already gone live from April 2008, we encounter a problem. We cannot change the depreciation key for Dep Area 15. Also, the group asset field is deactivated for gone live assets. But it works fine for assets created afresh.
Please help.
Regards
Hi,
You have to select specific asset classes for group assets via the config.
and you can set default dep keys at asset class level. via config. (maintain dep keys for dep area 15)
Please check and revert back.
Thanks,
Srinu
Similar Messages
-
Dear Experts,
My user has given a new scenario where we have to calculate tax depreciation for assets transferred from US books to SG books. When the transfers were executed, the tax depreciation area was not set up in the SG books' Chart of Depreciation. We do have other company codes assigned to the same chart of depreciation. For these other company codes, tax depreciation calculation is not required. In addition, the transferred assets and the assets in the other company codes share the same asset classes. The requirement is that we want to calculate the tax depreciation in the SG book only but not the other company codes.
Initially, we are looking at setting up the tax depreciation area in the SG book and activate the depreciation area via AFBN (program RAFABNEW). This will activate the tax depreciation area for all existing assets under the chart of depreciation/asset class assignment. However, we found out that we could not deactivate the depreciation area in the existing assets in the other company codes. This is regardless of whether we activate the field XAFBE (deactivate depreciation area) in the depreciation area layout. Seems that this only works with new assets.
Would like to seek your advice on the options available other than creating new asset classes for these transferred assets.
Is it possible to enhance the program RAFABNEW to include company code and asset classes?
Thank you.This is another option that I used on that scenario, but it is up to you if you want to follow the same approach. We created a custom program that will put a temporary deactivation date on the assets the we do not want to extend the new book. Basically this is direct update on field ANLA-DEACTIV.
Then we run AFBN, since the assets are deactivated, new depreciation area will not be created on these assets, but only on those assets that are active.
Then you can set the deactivation date again back to "Blank" after you run AFBN.
Thanks!
Jhero -
New Depreciation Area tobe added to the existing Assets
Hi,
I had Run OAYZ to activate a depreciation area for a Asset Class
I run AFBN to add this new depreciation area to the existing assets.
When I go to Assets Explorer (AW01N) I get following area
Values for Ordinary deprec. have changed in dep. area 13 in fiscal year 2007
Message no. AU390
Diagnosis
Depreciation terms were changed in depreciation area 13 since the last
time depreciation was recalculated. The values for Ordinary deprec. that
were saved in the database in fiscal year 2007 are therefore different
from the newly calculated values by an amount of
476.41-.
Procedure
Check if the newly calculated values are correct. If they are, then
carry out a depreciation recalculation. You should be aware that if you
recalculate depreciation, new values could arise for all open fiscal
years, and these would then have to be posted to the general ledger by
means of a depreciation posting run.
If, on the other hand, you want to keep the values that are saved in the
database, you have to set the depreciation terms back to how they were
at the time of the last depreciation recalculation.
To see a comparison of the old and new values, you can use the Display
dep. calc. function in the asset value display or the Recalculate values
function in the Asset Accounting menu.
Proceed
Now if I try to click on proceed and recalculate the depreciation (AFAR) the system gives error
40001 0 WRK SURF FOR RDQ WRKPROJCT RMS-RSCH DATA OP. 2007 Error
in dep. calculation
Message no. BL001
Pl. guide me for the same.
REgards,
Sanjay Soni
[email protected]Hi Sanjay,
Execute T Code AFBN and add the new depreciation areas to the existing assets. This will add the new dep area to all the assets under the particular char of depreciation.
regards
Sridhar -
New Depreciation Area in Asset Master Data, for assets under construction.
Hi,
The issue is relating to New Depreciation area. We have created new Depreciation area as 80=IFRS. We had followed three steps
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :-
3.1 u2013 Indicator: Leave values initial = ticked. Set this indicator if you want to open the newly created depreciation area without any values i.e. blank.
In this we have find that the old assets value has been copied. But when we are doing internal order settlement through KO88 i.e. from pre-cap to AUC we are not finding new Depreciation area 80=IFRS in AUC. We had checked in AW01N.
Letu2019s assume that creating a new deprecation area is normally not required since these assets are not depreciated. But During the final settlement, the new depreciation area should also automatically supplied with values from the reference depreciation area from the AUC(assets under construction) in the completed assets. But we doesnu2019t find any values of in Dep Key = 80 IFRS for final assets.
In Assets Class of AUC we had used Investmnet Measure as Status of AUC.
Kindly provide solution for the same.
NikhilCheck Transfer Variant 5 (under Transactions->Intercompany Asset Transfers->Automatic Intercompany Asset Transfers->Define Transfer Variants):
5 Investment measure settlement
Your Transfer Method is most likely 1 now (without transfer to dependant areas), change it to:
4 Gross method with transfer of values to dependent areas
This should help. -
Value in new depreciation area is Zero
Hello All,
I have created a new depreciation area 11. In OABC it is set as 01 (values from book depreciation). In OAYZ, I have assigned the new depreciation area to new asset classes. Then I transferred to value from old assets to new assets by ABUMN and run AFBN for opening the new depreciation area.
In AW01N, I can see the new depreciation area for the asset but with zero value. In the transactions I see the transfer with transaction type 158 and with zero value for the new area. The transaction type taken for book depreciation is 310 and has the correct value. But earlier when I did the testing in quality the transaction type was 310 for both the areas.
In AFBN, the check box Leave initial value was unchecked initially and when I ran it again I result was processed 0 and error 0. I reversed one asset and transferred to new asset class containing both depreciation area again. But again the value in depreciation area 11 is Nil.
Please help.
Thanks,
SangramHi Sangram
Since you are already executed AFBN with the option "Leave initial values", you cannot update the records now, as the table entries have already would have got created in tables ANLB,ANLC, etc.
Now if you want to copy values from other depreicaiton areas to new dep area, one option is to copy a ZZZAFANEW1 by doing a small modification (that is by changing all ABAP commands INSERT to UPDATE) and execute this program. This will update the values from the source depreciation area to target depreciation area, even if table record already exists.
This code is available in SAP note no.317806
Test it thoroughly before using it in Production client. Also take care to enter a correct source and target depreciation area to avoid further problems.
Hope this helps.
Regards -
FI-AA new depreciation area - treatment depreciation previous years
Hi,
In the FI-AA module , next to the already existing depreciation area 01 for Fiscal reporting with full integration of postings to FI-GL, I have created a new depreciation area 20 for te purpose of Management reporting which takes over its APC values from depreciation area 01 and does only post different Depreciation values to FI-GL.
Subsequently I updated the data for the new depreciation area in teh already existing asset master data records ( different depreciation keys).
The depreciation calculation and resulting postings for the current year are correct.
However I wonder what will happen with the data for the previous years;
when i look in the asset explorer i do see for the new depr area in the "posted values" tab that it reports for the previous years planned depreciation amounts . However we do not want to post these amounts in the previous years because these years have already been closed and audited.
Will we be able at the end of this fiscal year to changeover FI-AA to the new fiscalyear ( transactions AJAB, AJRW) without the system complaining with error messages that we first need to also perform the depreciation postings for all the previous years in this new depreciation area ?
Many thanks in advance for your much appreciated help.
Kind Regards,
ArjanCan you please tell me how you added the new depreciaton area to the existing asset masters in those classes ? To get the new depreciation area to show up? We just did the same thing and we're only working with assets that were acquired this year - but we can't get the new depreciation area added to the assets that already existed in those classes. If you figured out how to do that it would sure help us out. I look forward to your response. We're in 4.7.
Thanks
Karla
Never mind found it from reading other posts. I used AFBN and it worked. Thanks
Edited by: Karla Trevithick on Sep 17, 2009 12:39 AM -
What are the prerequisites to create New Depreciation areas
Hi SAP experts,
I would like to know what are the prerequisites to create new depreciation areas and what is the configuration for this in details.
Thanks & Regards
MoulyHi Mouly,
The pre- requisite for creation of depreciation area are
- Reporting of depreciation as per different laws i.e in india, we need to report depn as per Ind accounting standards, as per income tax act, etc
- Whether we are using parallel currency or not for that company code.
Regards
Vivek -
How to update the New Depreciation Area in Asset Master Data
Hi,
Please guide me
How to update the New Depreciation Area in the Asset Master Data.
Regards
SrinivasHi,
a) The procedure is as follows:
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program
RAFABNEW :
3.1 Indicator: Leave values initial = not ticked.
Do not set this indicator if you want the system
to copy the values from depreciation area 01.
3.2 Indicator: Leave values initial = ticked.
Set this indicator if you want to open the newly created
depreciation area without any values i.e. blank.
4. Recalculate depreciation via AFAR and program RAAFAR00.
b) Helpful notes:
430618 (Procedure for setting up new depreciation area)
301113 (Restrictions of RAFABNEW)
421549 (RAFABNEW: Error with closed fiscal years)
c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
regards Bernhard -
Value of asset in new depreciation area is Zero
Hello All
I have created a new depreciation area 11. In OABC it is set as 01 (values from book depreciation). In OAYZ, I have assigned the new depreciation area to new asset classes. Then I transferred to value from old assets to new assets by ABUMN and run AFBN for opening the new depreciation area.
In AW01N, I can see the new depreciation area for the asset but with zero value. In the transactions I see the transfer with transaction type 158 and with zero value for the new area. The transaction type taken for book depreciation is 310 and has the correct value.
Can anyone tell me how to get the net book value in area 11.
Thanks,
SangramDear Sangram
To ad a depreciation areas you have to proceed as follows. Point 3 explains how to get how to get the net book value in
area 11.
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program
RAFABNEW :
3.1 Indicator: Leave values initial = not ticked.
Do not set this indicator if you want the system
to copy the values from depreciation area 01.
3.2 Indicator: Leave values initial = ticked.
Set this indicator if you want to open the newly created
depreciation area without any values i.e. blank.
4. Recalculate depreciation via AFAR and program RAAFAR00.
Regards Bernhard -
URGENT: I CAN'T SEE DEPRECIATION VALUES IN NEW DEPRECIATION AREA
HELLO: I HAVE CREATED A NEW DEPRECIATION AREA THAT IS SIMILAR TO AREA 01. WHEN I SEE THE REPORT OF ASSET EXPLORER I WATCH VALUES IN SECCTION "DEPRECIATION POSTED/PLANNED" BUT THERE IS NOT VALUES IN THE NEW DEPRECIATION AREA. COULD YOU POSSIBLE HELP ME?
BEST REGARDS,
ALFREDO DEL PORTILLOtry tcode AFAR
A. -
Adding new depreciation area to assets
Hi,
1.I created a new depreciation area 13( tax depreciation) . When I am executing the transaction AFBN for adding this depreciation area to all the assets, first I am getting the error message
+/- sign rule for the new depreciation area is too restrictive
Message no. AU 113 " and
" Closed fiscal years for areas 01 and 13 differ by more than 1 years ".
2. I am in 4.6C and in OAAR, for depreciation area 13 the closed fiscal year is 2002 and for all others 2007.
3. The OSS note 421549 is already implemented.
Any help for resolving this is highly appreciated.
thanks
Srinivasa VepaHii
as u said the message says that the closed fiscal year for dep.area 01 and 13 is more than one year.
and u also state that the fiscal year close for dep area 13 is 2002 and for all others is 2007.
so first step u need to do is to close the fiscal year for dep. area 13 till 2006.
here the functionality of AA works like it allows only 2 fiscal year to be open at the same time.. so as the dep. area 13 is open since 2003 it will give u an error..
so please try to close all this and i m sure it will solve ur query......
thanks
sejal -
Legacy data transfer for new depreciation area for already existing assets
Hi all,
I am doing legacy data transfer for New deprecaition area for already existing assets through AS92.
I like to give Ordinay depreciation posted amount for the current FY for these assets in AS92, but i find this field is not editable inAS92.
Please guide me to upload the Posted deprecaiton amount (for current FY) for these assets. I have assets both which are acquired in Last FY year and also this FY year.
Regards,
SrinivasHI,
I have to migrate Posted dpereciation for new depreciation for nearly 3000 assets, In transaction 147, where i need give Acquituion value aslo, please note these are not new assets, these are prior year assets wiht opeing balances. If we use 147 system will take it is current acquition.
Please note my transter date is 28.02.2010, I have already run AFAB for this company cdoe Feb 2010 for other depreciation areas.
Now i am trying to update Opening APC Cost and Opening Accumulated deprecation for these assets and also posted depreciation for this FY.
Where in AS92, i am able to update Opeing APC Cost and Opeing Acc Dep succsfully for new dep area for already existingassets, bu Posted deprecation field is not editable.
Please guide me how to update posted deprecation for new deprecaition area in AS92 or some other way for already existing assets.
REgards,
Srinivas -
Cannot Create a new depreciation area
Hello.
I´m having some trouble creating a new Dep Area. At first when I tryed to create a copy from one on the list (Number 15) it showed me an error that said something like: "Transaction tipe 335 does not exists" (later on I´ve figured out that I also needed to create a trans. type Nº337)
The thing is that i must have created them BOTH wrong beacause then i started to guet this error(s):
http://img195.imageshack.us/img195/5691/errorfug.jpg
Can any of you please help me? How do I fix this thing? How do I define correctly the parameters of these tx. types??
Your help will be MOST apreciated. Thanks.
PS: I´m sorry about the grammar, I´m kinda rusty with my english skills.
Edited by: Zeque.- on May 21, 2009 8:22 PM
Edited by: Zeque.- on May 21, 2009 8:23 PMYes I have created tx 335. It´s not working yet. I believe I have mess up with the settings.
Can you please showme how to set it right?
Here is the error i get:
Transfer variant 9 02 30: Method 1 acquis. TTY is not allowed
Message no. AC638
Diagnosis
Transfer method 1 is specified for depreciation area 30. A retirement transaction type is assigned for retirements, and therefore an acquisition transaction type must be assigned for acquisitions that allows manual entry of proportional values.
Procedure
Check the assigned transaction type. -
Unable to uncheck "Allowed negative values" in depreciation area after post
Hi Friends
I have issue with AUC negative opening Balances and the details are below
I have some AUCs with negative opening balances and trying to settle to Assets
I selected the check mark " Allow negative values" in depreciation area and settled the amount
After that i want to uncheck but the system is not allowing me to uncheck
please help me in this issue
Thanks in Advance
SreenivasHi,
Check OABN transaction and change the settings to the dep. area.
Regards,
Eli -
Assign Company Codes to new Credit Controlling areas after going live.
Dear FI Experts;
Our Status Now:
We Have 3 Company Codes, CC 1000, 2000, 3000 and one Credit Controlling Area Code 0001, and the Customers are assigned to this Credit Controlling area with no problems and we are live since about 9 months ago.
Requirement:
We have a requirement to split the Customer Credit limit between companies, which means we have to create more credit control areas for example CCA 0002, and 0003, and though assign our 3 company codes to the new credit control areas, as follows:
CC 1000 to CCA 0001
CC2000 to CCA 0002
CC3000 to CCA 0003
And my Question is, what is the procedures to follow to do that (Not a Customization Procedures, I mean the How the Customers would be affected and the open items for them and how to resolve that), since as mentioned above we are already live since 9 months ago, and credit management is active and all our customers are assigned to our old Credit control area 0001, and also what is the consequence of doing that new assignment since we are live, thanks for your replyYou will need to manage to create new credit master data under new credit control area. System should reorganize existing credit data after reassignment, that is when you change master data (create credit master under new credit control area), new credit exposure is calculated based on AR in company code and existing open orders will get rechecked for credit under new credit control area & new risk categories assigned to them.
Maybe you are looking for
-
Unable to run fresh Web Role solution
I compiled my first Web Role (Cloud Service) project and that worked; the output was "Build Successful". However when I want to run it the output shows: "Microsoft Azure Tools: Failed to initialize Microsoft Azure storage emulator. Unable to start th
-
Synchronize WF Local tables program
Hi, I'm on 11.5.10.2 and I'm trying to rename the oracle username (fnd_user table) (Ex: ABC to ABCD). Once I rename the user, and run the Synchronize WF Local tables program, I can query the new user name with the attached responsibilities. However i
-
I cannot open Nikon NRW Files in Elements 11. Help please
I cannot open Nikon NRW raw files in Elements 11 Help please
-
Safari constantly crashing on imac os 10.5.8??????
ok, the problem started by interupting itunes making songs stop intermittently, then safari would take ages to load to apple homepage, the minute you navigate away it crashes and leaves this report, any help would be massivley appreciated, thanks in
-
when I download an app on one of my iPads it automatically downloads on to my other iPads, how do i stop this?