New Depreciation to start from Mar (not Jan) after change of useful life

Hi
Does anyoe has any solution or will there be changes to SAP B1's Fixed Asset?
Let me explain the full scenario as below:
1) Customer has Fixed Assest which has useful life of 25 years, i.e. 300 months.
2) The assets has been depreciated for a few months, e.g from July 2008 to Mar 2009. In FA Master Data, it shows the remaining useful life is 294.
3) From Mar 2009 onwards, the management decides that the userful life is to be 30 instead of 25. The past depreciated value is to remain. The new depreciated value is to be effective from Mar 2009 onwards.
Changes Done
1) In Fixed Asset Master file, under the General tab, a change has been made to the Useful life from 300 to 360. The remaining life is auto-change to 354.
2) Re-run the depreciation for Mar 2009.
3) The new depreciated value is re-calculated from Jan 2009 onwards and the adjustment is posted in Mar 2009.
What is required is that Jan 2009 to Feb 2009 should remain the original depreciated value. The new depreciated value should be adjusted from Mar 2009 onwards.
Please advise is there any solution or proposals.
Example
Asset value = 518749.95
Useful life = 300
Remaining Useful life = 294
Monthly Planned Depreciated Value = 1729.17, Dec Planned Depreciated value = 1729.13
After Changes Done
Asset value = 250000
Useful life = 360
Remaining Useful life = 354
Monthly Planned Depreciated Value = 1436.09, Dec Planned Depreciated value = 1436.06
Required
Asset value = 250000
Useful life = 360
Remaining Useful life = 354
Jan and Feb Planned Depreciated Value = 1729.17
Mar 2009 onwards, Planned Depreciated Value = 1404.95
Calculation = (518749.95 - 20750 - 3458.34)/352
where 20750 is the depreciated value for 2008 and 3458.34 is the depreciated value for Jan and Feb 2009.
Thanks
Siew Yuen

Hi Yatsea
Let me explain the full scenario as below:
1) Customer has Fixed Assest which has useful life of 25 years, i.e. 300 months.
2) The assets has been depreciated for a few months, e.g from July 2008 to Mar 2009. In FA Master Data, it shows the remaining useful life is 294.
3) From Mar 2009 onwards, the management decides that the userful life is to be 30 instead of 25. The past depreciated value is to remain. The new depreciated value is to be effective from Mar 2009 onwards.
Changes Done
1) In Fixed Asset Master file, under the General tab, a change has been made to the Useful life from 300 to 360. The remaining life is auto-change to 354.
2) Re-run the depreciation for Mar 2009.
3) The new depreciated value is re-calculated from Jan 2009 onwards and the adjustment is posted in Mar 2009.
What is required is that Jan 2009 to Feb 2009 should remain the original depreciated value. The new depreciated value should be adjusted from Mar 2009 onwards.
Please advise is there any solution or proposals.
Example
Asset value = 518749.95
Useful life = 300
Remaining Useful life = 294
Monthly Planned Depreciated Value = 1729.17, Dec Planned Depreciated value = 1729.13
After Changes Done
Asset value = 250000
Useful life = 360
Remaining Useful life = 354
Monthly Planned Depreciated Value = 1436.09, Dec Planned Depreciated value = 1436.06
Required
Asset value = 250000
Useful life = 360
Remaining Useful life = 354
Jan and Feb Planned Depreciated Value = 1729.17
Mar 2009 onwards, Planned Depreciated Value = 1404.95
Calculation = (518749.95 - 20750 - 3458.34)/352
where 20750 is the depreciated value for 2008 and 3458.34 is the depreciated value for Jan and Feb 2009.
Thanks
Siew Yuen

Similar Messages

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
== This happened ==
Every time Firefox opened
== After removing Firefox and Reinstalling it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

How can i set my calendar start from Monday NOT Sunday like it is now?

How can i set my calendar start from Monday NOT Sunday like it is now?

Read this thread: https://discussions.apple.com/message/11501621#11501621
For example, if you set the Regional format to United Kingdom, the days will be re-ordered but it will have other effects as well which you probably don't want.

Change in Useful life of asset in mid year, but the previous posted depreciation should not be changed

Dear Experts,
I have a requirement in one of my client, We need to extend the useful life of asset in mid of an asset fiscal year and the depreciation which was posted in the previous should not be changed.
Requirement:
Useful life of asset is to be extended after completing depreciation for 4 years and in-between the current asset fiscal year. Provided the present asset value has to be taken as the new book value of the asset and the depreciation posted henceforth to be posted based on the new asset value till the remaining useful life.
Previously posted depreciation should be unchanged.
Analysis:
1.      The fiscal Year followed - October to September.
2.      The useful life of asset will be changed, and the depreciated value posted till 31/mar 2014 will have the old depreciation value ( based on the original acquisition value)
3.      The Depreciation key used in of type LINR (linear), depreciation value will be calculated based on the Book value till the asset value becomes ZERO at the end of useful life of the asset.
4.      We can change the useful life of the asset at the end of a Asset fiscal year say FY- 2014, if this is done the existing configuration will take the Book value of the asset at the end of the Fiscal as the asset value and the new depreciation will be calculated based on the new useful life of the asset. The asset value will become ZERO at the end of the newly changed Useful Life.
5.      But the requirement is that the useful life of the asset will be changed exactly half way in between existing Asset fiscal (i.e., 31/03/2014), if this is done system will change the depreciation value based on the new useful life ( since the Dep Key is LINR), but the depreciation value will change from the fiscal start say October 2013 to September 2014 ), which will not satisfy the requirement of the client. Since the depreciation which is already posted from October 2013 to March 2014 should not be changed.
Note:
1. We are not willing to retire the asset and create a new asset with the remaining book value as asset value and start depreciation.
Kindly let me know if the requirement can be fulfilled without retiring the asset.

Dear All,
This requirement has been completed.
1. I created New Multi level valuation method with base 26 ( Net book value w/o Revaluation ).
2. New depreciation key was created and the above method was assigned to it. I never changed the Base method.
3. new interval was created in the depreciation area, with this created dep key and extended the useful life of the asset. The depreciation was calculated according to the requirement.
Originally the asset had useful life of 5 Years, I changed the asset useful life to 8 years now with new Depreciation key 2001.
Depreciation was already posted to the asset till 04- 2013 for an amount of 148.27 SAR.
Net Book value carried forward to 2013 = 1575.56 SAR
Depreciation already posted till 4th period =   148.27 SAR
Current Net book value after useful life extension           = 1427.29 SAR .
Now the new depreciation key 2001 with Multilevel method 201, will take this Net-book value as Asset value and will depreciate along the useful life of the asset till it becomes zero.
Planned depreciation of 2013 ( remaining 6 months) = 166.24 SAR
Planned depreciation of 2014 = 225.96 SAR
Planned depreciation of 2015 = 225.96 SAR
Planned depreciation of 2016 = 225.96 SAR
Planned depreciation of 2017 = 225.96 SAR
Planned depreciation of 2018 = 225.96 SAR
Planned depreciation of 2019 = 131.25 SAR
Total      = 1427.29 SAR ( the Asset value becomes zero at the end of its remaining useful life.
The previously posted depreciation from 01.01.2013 to 30.04.2013 was untouched.

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

How do you access updates to apps from the App store after changing to a new ID because the password on the old ID was changed and you don't know what it is now?

How do you access updates to apps from the App store after changing to a new ID because the password on the old ID was changed by the former husband and you don't know what it is now? And you set up your own new ID and account but can NOT access the updates, from the App store for the many apps that you already have, because they require that you sign in with that former now inaccessible ID and account and password? Call it a problem of modern times and changing relationships, if you want to be charitable.

So I guess it will only be new apps that I download that are allowed to give me their updates while 13 updates wait for me on an ID I can no longer access.
Yes... sorry.
In the future, if need be, you can re download your purchases for free > Downloading past purchases from the App Store, iBookstore, and iTunes Store
Good rule of thumb is to back up your purchases regardless > Mac App Store: Backing up your app purchases

TS2570 Question re: "Start from your Mac OS X Install disc; use Disk Utility"

I've worked my way through the step-by-step trouble shooting in the TS2570 article up to "Start from your Mac OS X Install disc; use Disk Utility". So far, every step results in the same outcome - my formerly trusty 2007 Intel duo core iMac (24") will not start up, freezing on a grey screen with a blinking question mark on a folder. I don't completely understand this next step. I have both a Leopard and a Snow Leopard disc. I'm not positive whether these were for the iMac, or my old Macbook Pro. I assume this makes a difference.

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps back.

While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps and music back. Do I need to set the phone up as new again?

Hi Vidbrent,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden

Sql is not working after changing from MsAccess into sql server

Following Sql is not working after changing from MsAccess into sql server.
sum(trn.sales) as sales,
sum(trn.cost) as cost,
sales - cost as profit // Here is not working . can we not use sales a column. Please advise
from trn
Kind Regards
pol
polachan

It will not work if use two different column from the table or column from two different table
Example
sum(trn.sales * trn.rate) as salesAmount,
sum(trn.cost) as cost,
sum(trn.salesAmount)-sum(trn.cost) as profit ----- Here is not working . can we not use sales a column. Please advise
from trn
Regards
polachan

B210a will not print after changing router\modem

b210a will not print after changing router\modem. Says it is connected to network, but will not print and says unavailable

Good morning,
Please use the second section of the following article to fix:
http://www8.hp.com/au/en/campaigns/wireless-printing-center/reconfiguring-system-help3.html?jumpid=r...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

New Apple TV starts as 720 not 1080?

Hi
I have just bought a new Apple TV directly from Apple.
I am connecting to a Sony Bravia TV, but when connecting it reports resolution as 720, not 1080. I have tried a different cable, but no joy.
I also have BT Vision through another AV channel and will switch ports / cables if I have to, but I am hoping you will tell me I am missing something simple :-) Please?
Bob

Not what I was hoping to hear, but at least I know now!
Thanks for your help
Bob

Source Safe causing LabVIEW Quick Start Screen to not appear after closing open vi windows?

Hey All,
We've recently implemented Source Safe version control for LabVIEW on XP and I've noticed that LabVIEW is hanging between closing open vi windows and showing the Quick Start Screen. The usual pattern is for the Quick Start window to appear after the last open vi window is closed. Instead the vi window is closed, the tab at the bottom of the screen says debug development and the Quick Start Screen does not appear, the tab does not read "Getting Started."
I think it is a LabVIEW <--> Source Safe issue when I do a Task Manager Exit on the LabVIEW process that I sometimes see a dialog box asking if I want to save changes in memory to disc and those files are not checked out. But it is too late at that point to do anything as XP clobbers the application before I can do anything.
Anyone else have this issue?
Message Edited by Drewski on 05-30-2008 02:28 PM

What LabVIEW version do you use?
I have used SourceSafe in every version from 8.0, and in the way some bugs are resolved.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Mail.app Different FROM ALIAS not full account change. NOT ".mac" HOW?!!

Hey there.
So I use forwarding aliases from various domains and have no interest in stopping this. Mail.app doesn't seem to have any way to switch the FROM address (not the replyto, but the actual from address) if you don't set up an entirely new account. I thought I could get around this by just setting up another account, however mail checks to see that the account logs in properly, and if it's the same account that you have another address set to it doesn't let you duplicate it cause it doesn't want to download the same mail twice every time or something. Of ourse I just wanted to tell it not to download the mail on the second account. Anyway, I need a way to have one account that's with my ISP [email protected] or whatever that I log into, but have like 5 others that it sends from [email protected] [email protected] [email protected] etc. but since all of these addresses forward to my main mail account I can't have a separate login for each of them.
I'm getting the impreassion that everyone who uses mail is just boxed in by the concepts handed to them, cause NO ONE seems to be talking about this issue. Unless I'm a complete idiot and am missing something obvious.
I found one other account of such a problem and the person also had a .mac account so everyone told him to just switch to always using the .mac account.
That's a totally unacceptable answer!
Anyway, I recently switched from Eudora which CAN do this with no problems. THe only problem is, eudora isn't integrated with address book, and more importantly, doesn't handle Japanese well.
If anyone can be of help I would greatly appreciate it. Thanks.

As if it wasn't doing this before.
Well, you're right that adding aliases to a mail account has no effect on the mail that's collected there, and that the statement you quoted is misleading. Problem is, that statement doesn't appear in the Mail Help's "Adding multiple email alias addresses to an account" article I was referring to, so I had no idea what were you talking about.
I've been able to find the article you've quoted in Apple's knowledge base:
Mac OS X: Using email aliases in Mail
I agree that the last part of this article is poorly written, but it's not in Mail Help, and it doesn't appear when typing alias in Mail Help's search box as I suggested.
I'm assuming all is well.
Let us know if that's not the case.

Calendar day to start from Saturday in UAE without changing Calendar language.

I am non Arabic living in UAE and Saudi Arabia and I want to change my iPhone calendar day to start on Saturday as natives without changing language to Arabic. Is there any way to do it? or did apple has given this choice in IPhone 5?

At this time the calendar is set for Sunday to Saturday. I would recommend submitting a enhancement request to On Demand customer care.

New Depreciation to start from Mar (not Jan) after change of useful life

Similar Messages

Maybe you are looking for