New Development and CA

We are in process of developing new eCommerce application on ATG. We also have a business requirement to manage images and products using BCC. Most of the business requirements in phase 1 of the project is to configure and deploy application code along with CA ( BCC / Merchandising). My question is whether it is advisable to do new application development along with CA configuration at the same time. What does ATG best practice say in this regard. My opinion is that we should do new application development (deliver new functionality) first to be followed by CA initiative. I have never directly worked on CA projects but I have been part of large teams with multiple initiatives where CA being one of the initiative and I have seen there are quite a few steps that one need to follow in configuring and deploying CA / BCC e.g. versioning of modules, modifying DB schema to support versioning etc. I don't want to run into issues where our main focus is to deliver new functionality and want to avoid the complexity of doing both new development and CA at the same time.
Edited by: 899085 on Nov 24, 2011 12:01 PM

The best practice recommendation would be to include any BCC/CA implementation as early as possible in your project plan. Understanding the process of how the business users will be using the tools and what impact any customizations to the ATG code your applications make are very important in a successful rollout of a site usign the BCC and Merchandizing. We tend to see that the projects which attempt to implement BCC/CA at the last minute are the ones that encounter the most problems. Projects which include the BCC and CA in the early stages of the applciation design, project planning, and UAT and load testing go through a much smoother test cycle and launch.

Similar Messages

NEW DEVELOPMENT AND ESTIMATE

Hi,
I would like to know about the Estimate required for a particular requirement.
For example,u need to set up a generic extractor based on 2 tables and then replicate it on BW side.
1)Logistics invoice verification:-Do we have any standard Extractor in R/3 for this.I have identified 2 tables RBKP and RSEG.So,I need to generate a view and build a generic extractorand then replicate it in BW.Can u tell me the estimate required for this along with building a cube ,Infosurces etc.
Thanks,
Samir

Sure - where do you want me to send the Purchase Order to?
In all seriousness - the generic extractor idea MAY work if you can find a timestamp or you may want to use a change pointer to generate a record
Then you will need a DSO to resolve duplicates and then build the cube
The estimate will be based on - how good are your abap skills, and how good are your BW skills
If you can;t find a std extractor do this (and I do believe there is one already) - then doing the work yyoru BI architect suggested - then about 10-25 days - and then puls opr minus denpending on whther the testing documentation needs to be watertight for SoX or ISO compliance

New Development system copy from Production

Hi All,
Hope you can help me out here with some ideas.
We are currently planning to implement a new SAP BW Development system, and for this we would like to make it a 1:1 copy of our current production system. Meaning all from customizing, ABAP, workbench objects etc.
But what we do not want is all the transaction and master data in infoobject, cubes etc., we are only interested in the structure and objects. Therefore we can rule out "System copy".
My question is then, is there any other ways to do this when system copy is a no go? I know we can do client copy but then we will not get all the workbench / ABAP programs which we need.
Any ideas on how to do this?
Thx. in Advance

Hi Rasmus,
But what we do not want is all the transaction and master data in infoobject, cubes etc., we are only interested in the structure and objects. Therefore we can rule out "System copy".
Options 1: As BI objects are cross client , copying client will not solve your purpose 100%.
You can perform system copy and then clean up data in DEV
Option 2: You can create a new Development and then create TRs for required configuration objects and move to new development system.
Option 3: Use SLO tools to perform container copy without any data.
Hope this helps.
Regards,
Deepak Kori

New Development - No Infrastructure!

We have moved into a new development and did have an engineer visit scheduled for yesterday to install our new line. The appointment was between 1-6pm, I called at 3pm and was told he was coming, I then call again at 5.15pm and was told the engineer wouldn't be coming. The reason was that additional work needed to be done at the exchange.
I then went with the building site manager and we inspected the BT ducting that surrounds my property. To my surprise there was absolutely no BT infrastructure at all in any of the ducts...no wonder the engineer couldn't install our line!
Today I have spent over 2 hours trying to speak to someone, 6 calls, 2 supervisors and got absolutely nowhere! All the call agents were hard to understand due to their very strong Indian accent. I've now had to open a complaint both over the phone and just now online.
I've believe that the 'New Building Site Development Team' needed to visit the site to install the core infrastructure. I've tried to make contact with them and failed, I've tried to escalate the issue and failed, I've tried to speak to someone senior enough to understand my problem....once again I've failed.
I'm literally lost for words at the customer service, not to mention angry for wasting a days holiday and even more upset that we will now have to spend over £400 a month on child care as we can't work from home.
If anyone can help me I'd be really grateful.

Just to clarify, this is not the builders responsibility.
The house itself has been cabled with the normal house points and cabling with a terminating "white" cable poking out the front of the house, all ready for the engineer to connect to. The onsite ducting and BT Manholes have all been installed, either by a contractor of Openreach or Bovis (if they are an approved installer). The only people who are allowed to install cabling within a BT duct is BT or a part of BT like Openreach, unless you seek Wayleave permission. I know this as I project manage 'dark fibre' installations across private estates.
Bovis themselves completed their work and gave BT permission to install infrastructure over 2 months ago. I confirmed this with both the site manager and Bovis headoffice.
After all my calls yesterday, I decided to phone BT Business as I know they are UK based, the person I spoke to was more useful and did give me the number for the 'New Estates Team' (0800 616866) - however when I called them I was told they can't deal with end users and I need to speak to my ISP...which is interesting as that's BT who I've so far spent 5 hours trying to communicate with.
I then tried to call Openreach but once again they won't speak to end users...
So the current position is;
1) I have no phone line
2) The estate has no BT infrastrucutre
3) I have complained via Twitter (36hrs response time) and the normal complaint channel (72hrs reponse time)
4) 5 Hours worth of calls (at a cost to me)
5) 1 days holiday taken for no reason
6) The additional cost of childcare (approx £150 a week)
7) Having to work in the office until midnight most evenings
8) I had to spend another 45mins talking to the accounts team, as they'd tried to take directdebit for the service!
The average time to actually get to speak to an 'agent' is 12mins, then 4-5mins to verify details, then 3mins for them to read the screen, then 3mins of them mumbling in an extrememly hard to hear accent. Eventually you explain the situation again, they pause, carry on with their script, you ask to speak to a supervisor...they also can't help.
There is without a doubt a problem in the process for getting a new estate setup, I really hope that somehow, via some method I manage to speak to someone who can help!

New development - need new roads added and 33 lot address locations corrected

Hello, I am in the new homes and residential development business. I just developed a new residential development and I need to get Bing to update their roads and addresses. The addresses and roads have been in existence since about August 2014. I would have
expected them to be updated by now but the roads are missing and the address locations are incorrect.
I have figured out how to get in touch with and submit bulk data to Google (Map Content Partners), but I cannot find an access point to Bing. I have gone the route of reporting mapping errors via Bing Maps, but I
was wondering if their is a way to give Bing bulk mapping data to update new addresses and roads. I have shape files that include parcel boundaries, road centerlines, address blocks, and address points. I have also included the lot address and correct location
coordinates below.
Any help appreciated.
12306 186TH ST E Puyallup, WA 98374 (-122.26914, 47.08904)
12310 186TH ST E Puyallup, WA 98374 (-122.26883, 47.08905)
12314 186TH ST E Puyallup, WA 98374 (-122.26853, 47.08906)
12302 186TH ST E Puyallup, WA 98374 (-122.26948, 47.08903)
12318 186TH ST E Puyallup, WA 98374 (-122.26819, 47.08906)
12228 186TH ST E Puyallup, WA 98374 (-122.26979, 47.0891)
18509 124TH AV E Puyallup, WA 98374 (-122.26786, 47.08912)
18413 124TH AV E Puyallup, WA 98374 (-122.26744, 47.08947)
18510 124TH AV E Puyallup, WA 98374 (-122.26832, 47.08954)
18517 123RD AV E Puyallup, WA 98374 (-122.26887, 47.08956)
18520 123RD AV E Puyallup, WA 98374 (-122.26955, 47.08958)
18407 124TH AV E Puyallup, WA 98374 (-122.26725, 47.08963)
18502 124TH AV E Puyallup, WA 98374 (-122.26811, 47.08969)
18511 123RD AV E Puyallup, WA 98374 (-122.26869, 47.08974)
18401 124TH AV E Puyallup, WA 98374 (-122.26703, 47.08979)
18516 123RD AV E Puyallup, WA 98374 (-122.26941, 47.08978)
18412 124TH AV E Puyallup, WA 98374 (-122.26792, 47.08985)
18507 123RD AV E Puyallup, WA 98374 (-122.26847, 47.0899)
12317 184TH ST CT E Puyallup, WA 98374
(-122.26683, 47.08997)
18512 123RD AV E Puyallup, WA 98374 (-122.26924, 47.08995)
18406 124TH AV E Puyallup, WA 98374 (-122.26772, 47.09001)
18415 123RD AV E Puyallup, WA 98374 (-122.26827, 47.09005)
18508 123RD AV E Puyallup, WA 98374 (-122.26904, 47.09012)
12313 184TH ST CT E Puyallup, WA 98374
(-122.26707, 47.09019)
18405 123RD AV E Puyallup, WA 98374 (-122.26805, 47.09021)
18416 123RD AV E Puyallup, WA 98374 (-122.26884, 47.09027)
12309 184TH ST CT E Puyallup, WA 98374
(-122.26732, 47.09033)
18410 123RD AV E Puyallup, WA 98374 (-122.26864, 47.09042)
12305 184TH ST CT E Puyallup, WA 98374
(-122.26754, 47.09046)
18404 123RD AV E Puyallup, WA 98374 (-122.26842, 47.09059)
12301 184TH ST CT E Puyallup, WA 98374
(-122.26776, 47.09061)
12227 184TH ST CT E Puyallup, WA 98374
(-122.26811, 47.09079)
18503 124TH AV E Puyallup, WA 98374 (-122.26763, 47.0893)

It doesn't look like our data provider has this data yet. Note that in order for new addresses and roads to be added our data provider usually needs to drive to correctly capture all required information. I'll pass this information on to them so they can
get this updated.
http://rbrundritt.wordpress.com

I just got a new Imac, and downloaded files from my old PC. Now, when I go to Finder, I have 1500 files in an area called developer. What is this, and can they be deleted? There are also 78 files listed as Other! Most of these files I do not recognize.

I just got a new IMac, and tried to download files from my old PC. When I go to,Finder, I have 1500 files under Developer, an 78 files under Other.
Most of these files I do not recognize. Can they be trashed? Why did they transfer? I used a flash drive for the transfer. Also, is there a way to transfer my older email files to this new computer?
Thanks for any and all help, I really need it.
Tom

Did you use the Migration Assistant to help set up the new iMac using some of the files in the older PC? Some likely won't mean much, unless you have applications that can use or convert them. There's also a way to use the software Time Machine to import data files from an external or another computer, so you may have used that, too.
Hopefully someone with experience in a similar issue will reply...
Good luck & happy computing!

I have a new mac and wanted to bring over my Design suite CS 4. I downloaded photoshop but it says "Setup" can't be opened because it is from an unidentfied developer. Anyway to install tis? I have the serial number

Anyway, I downloaded it all but just photoshop I downloaded separtly, It is really the only one I use. Seems my old OS was to old and my new is too new?
I have a new mac and wanted to bring over my Design suite CS 4. I downloaded photoshop but it says "Setup" can't be opened because it is from an unidentfied developer. Anyway to install this? I have the serial number for my orginal CS4 design suite.
Thanks

Hi,
If you have the suite then you have to download the whole suite otherwise the Serial Number will not work, if you only download Photoshop. Once you download the suite you can choose to only install Photoshop and use the Serial number you have.
You can download from here.
Download CS4 products
If you get the message:Setup" can't be opened because it is from an unidentified developer , You can follow Fix the “App can’t be opened because it is from an unidentified developer” Error in Mac OS X .
**You can change it to MAC App store and identified developers afterwards.

Primavera webcast: Strategies for New Product Development and Innovation

[Strategies for New Product Development and Innovation Success: Project Portfolio Management for the Industrial Manufacturing Recovery|http://www.bulldogsolutions.net/OracleManufacturing/ORM02252010/frmRegistration.aspx?bdls=23246]
Jim Brown, manufacturing industry expert and President of Tech-Clarity, will discuss how leading manufacturers are shifting their product portfolios for the economic recovery, emerging from survival mode and resuming growth strategies.
* Webcast: Strategies for New Product Development and Innovation Success: Project Portfolio Management for the Industrial Manufacturing Recovery.
* Date: Thursday, February 25, 2010
* Time: 11 a.m. EDT
* Registration: http://www.bulldogsolutions.net/OracleManufacturing/ORM02252010/frmRegistration.aspx?bdls=23246
For questions about this event, please contact Julie Castro at +1 415 608 4677.

[Strategies for New Product Development and Innovation Success: Project Portfolio Management for the Industrial Manufacturing Recovery|http://www.bulldogsolutions.net/OracleManufacturing/ORM02252010/frmRegistration.aspx?bdls=23246]
Jim Brown, manufacturing industry expert and President of Tech-Clarity, will discuss how leading manufacturers are shifting their product portfolios for the economic recovery, emerging from survival mode and resuming growth strategies.
* Webcast: Strategies for New Product Development and Innovation Success: Project Portfolio Management for the Industrial Manufacturing Recovery.
* Date: Thursday, February 25, 2010
* Time: 11 a.m. EDT
* Registration: http://www.bulldogsolutions.net/OracleManufacturing/ORM02252010/frmRegistration.aspx?bdls=23246
For questions about this event, please contact Julie Castro at +1 415 608 4677.

I have just became an Apple Developer and new to this whole developing thing.

I have just became an Apple Developer and new to this whole developing thing. I became an apple developer to support what I'm doing.I just graduated high school and became a self learning video producer. I created videos since I first got into high school and that was my major. I'm planning on making a podcast channel. What I'm really asking is, how do I create an app for my website for older version iOS device (at least iOS 3 or iOS 4)???

etresoft wrote:
If you want to make apps, you will need a Mac.
Three of my friends told me I can use a windows to create apps.... they told me about this site: http://mobile.conduit.com/

We bought a new computer and re downloaded lightroom3, now when I go and try to Develope my picture when I go into Presets the Punch, black and white effects ect won't pull up. How do I fix that?

We bought a new computer and re downloaded lightroom3, now when I go and try to Develope my picture when I go into Presets the Punch, black and white effects ect won't pull up. How do I fix that?Photoshop Lightroom

After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

Developing new version and support the production version

Hi,
I need to work on two diferent versions on my track one with the new features we are developing and the other that is working on the production environment, and I don´t know how to do it. two tracks? branch?
Any idea how to do it?
Thanks and regards,
Eduardo

Hi Eduardo,
please take a look at this blog by Marion Schlotte.
Best Practices for NWDI: Track design for ongoing development:
/people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development
I bet, this will help you on choosing the right option for your project.
Hope this helps
Jan

Importing a DC and Creating a new development component

Hi,
After importing a DC and Creating a new development component, my netweaver developer studio is complaining that the com.sap.tc.webdynpro.progmodel.api.* cannot be resolved.
And the strange thing is that if i create a local project and then create a development component, the API can be resolved without any problem.
Can anyone advise what i should do to fix this problem ?
Thanks.
Best Regards,
Daniel

Hi Daniel
Go to your project properties and then go to Java build path and in that Libraries tab there you can find number of JARs included in it for reference of the project just compare both imported and newly created projects and try to add the missing JARs in the imported project
thanks
Ninad

HT4530 I just purchased an iMac and developed a user name and password. I'm trying to install a program but can't because I forgot that information and didn't write it down. How do I reissue a new username and password

I just purchased an iMac and upon setting it up I initiated an username and a password. Unfortunately I didn't write it down and now I'm trying to add software and the system won't let me because I forget that info. How do I reissue a new usernam and password?

Boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” and press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password.
Select  ▹ Restart from the menu bar.
You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

New development forums

I discovered that there's a whole new section I have never seen in the cisco forums that specifically targets developers:
http://forums.cisco.com/eforum/servlet/CDN?page=main
Amongst other things, there are separate forums for various APIs and a forum about IP Phone services.
So I'm wondering if anybody working at Cisco would care to comment as to what the idea is with having multiple forums for the same purpose. Are we supposed to migrate to the new developer area and will posts be moved at some date and this forum closed, or what will happen with it?

That is a news to me. Thanks for sharing. I hope Cisco can merge these forums so we have only one place to search.

New Development - Leave Application (HR)

I am working on a project where my client need a new development on leave where both some attendance types and absence types should be request from same screen.
so please help me in this issue.

Hi,
you need to work on Infotype 2001 & 2002.
That is tables PA2001 & PA2002.
Regards,
Amit

New Development and CA

Similar Messages

Maybe you are looking for