New Development

Hi Gurus
We have Dev,QA and Prod system. I have assigned task to do new developnment as and when required by Query developer so would you pl advise if I need to start from Dev >>>QA>>>Prod?
When I should transport the new dev to QA? Do I need to do some testing in Dev also before transporting to QA?
pl help.
Also If any modification is required in the existing system then I should do it in Dev right?
Also to monitor the data load I need to log on to Prod system , Am I right?
Pl help
Thanks
KK

Hi,
You should always do any development/changes in Dev.
If you need to prototype something you should do that in your sandbox client and then replicate the same in Dev.
After you finish the development/changes you should unit test it in Dev to make sure the functionality/changes work as they are suppossed to. You should get the test results reviewed and signed off and then release the transport. You should then migrate that to the QA system and do end to end testing, meaning check out all apsects from data loading to running the changed/developed report for example. You should let the end user/technical owner(as the case maybe depending on backedn or front end changes/development) either test the changes in QA with appropriate data. Once they sign off you can go ahead and migrate the changes to Prod.
For job monitoring , you'll directly goto Prod .
Cheers,
Kedar

Similar Messages

  • New Development and CA

    We are in process of developing new eCommerce application on ATG. We also have a business requirement to manage images and products using BCC. Most of the business requirements in phase 1 of the project is to configure and deploy application code along with CA ( BCC / Merchandising). My question is whether it is advisable to do new application development along with CA configuration at the same time. What does ATG best practice say in this regard. My opinion is that we should do new application development (deliver new functionality) first to be followed by CA initiative. I have never directly worked on CA projects but I have been part of large teams with multiple initiatives where CA being one of the initiative and I have seen there are quite a few steps that one need to follow in configuring and deploying CA / BCC e.g. versioning of modules, modifying DB schema to support versioning etc. I don't want to run into issues where our main focus is to deliver new functionality and want to avoid the complexity of doing both new development and CA at the same time.
    Edited by: 899085 on Nov 24, 2011 12:01 PM

    The best practice recommendation would be to include any BCC/CA implementation as early as possible in your project plan. Understanding the process of how the business users will be using the tools and what impact any customizations to the ATG code your applications make are very important in a successful rollout of a site usign the BCC and Merchandizing. We tend to see that the projects which attempt to implement BCC/CA at the last minute are the ones that encounter the most problems. Projects which include the BCC and CA in the early stages of the applciation design, project planning, and UAT and load testing go through a much smoother test cycle and launch.

  • New development forums

    I discovered that there's a whole new section I have never seen in the cisco forums that specifically targets developers:
    http://forums.cisco.com/eforum/servlet/CDN?page=main
    Amongst other things, there are separate forums for various APIs and a forum about IP Phone services.
    So I'm wondering if anybody working at Cisco would care to comment as to what the idea is with having multiple forums for the same purpose. Are we supposed to migrate to the new developer area and will posts be moved at some date and this forum closed, or what will happen with it?

    That is a news to me. Thanks for sharing. I hope Cisco can merge these forums so we have only one place to search.

  • New Development system copy from Production

    Hi All,
    Hope you can help me out here with some ideas.
    We are currently planning to implement a new SAP BW Development system, and for this we would like to make it a 1:1 copy of our current production system. Meaning all from customizing, ABAP, workbench objects etc.
    But what we do not want is all the transaction and master data in infoobject, cubes etc., we are only interested in the structure and objects. Therefore we can rule out "System copy".
    My question is then, is there any other ways to do this when system copy is a no go? I know we can do client copy but then we will not get all the workbench / ABAP programs which we need.
    Any ideas on how to do this?
    Thx. in Advance

    Hi Rasmus,
    But what we do not want is all the transaction and master data in infoobject, cubes etc., we are only interested in the structure and objects. Therefore we can rule out "System copy".
    Options 1: As BI objects are cross client , copying client will not solve your purpose 100%.
                    You can perform system copy and then clean up data in DEV
    Option 2: You can create a new Development and then create TRs for required configuration objects and move to new development system.
    Option 3: Use SLO tools to perform container copy without any data.
    Hope this helps.
    Regards,
    Deepak Kori

  • New Development - Leave Application (HR)

    I am working on a project where my client need a new development on leave where both some attendance types and absence types should be request from same screen.
    so please help me in this issue.

    Hi,
    you need to work on Infotype 2001 & 2002.
    That is tables PA2001 & PA2002.
    Regards,
    Amit

  • New Development - No Infrastructure!

    We have moved into a new development and did have an engineer visit scheduled for yesterday to install our new line. The appointment was between 1-6pm, I called at 3pm and was told he was coming, I then call again at 5.15pm and was told the engineer wouldn't be coming. The reason was that additional work needed to be done at the exchange.
    I then went with the building site manager and we inspected the BT ducting that surrounds my property. To my surprise there was absolutely no BT infrastructure at all in any of the ducts...no wonder the engineer couldn't install our line!
    Today I have spent over 2 hours trying to speak to someone, 6 calls, 2 supervisors and got absolutely nowhere! All the call agents were hard to understand due to their very strong Indian accent. I've now had to open a complaint both over the phone and just now online.
    I've believe that the 'New Building Site Development Team' needed to visit the site to install the core infrastructure. I've tried to make contact with them and failed, I've tried to escalate the issue and failed, I've tried to speak to someone senior enough to understand my problem....once again I've failed.
    I'm literally lost for words at the customer service, not to mention angry for wasting a days holiday and even more upset that we will now have to spend over £400 a month on child care as we can't work from home.
    If anyone can help me I'd be really grateful. 

    Just to clarify, this is not the builders responsibility.
    The house itself has been cabled with the normal house points and cabling with a terminating "white" cable poking out the front of the house, all ready for the engineer to connect to. The onsite ducting and BT Manholes have all been installed, either by a contractor of Openreach or Bovis (if they are an approved installer). The only people who are allowed to install cabling within a BT duct is BT or a part of BT like Openreach, unless you seek Wayleave permission. I know this as I project manage 'dark fibre' installations across private estates.
    Bovis themselves completed their work and gave BT permission to install infrastructure over 2 months ago. I confirmed this with both the site manager and Bovis headoffice.
    After all my calls yesterday, I decided to phone BT Business as I know they are UK based, the person I spoke to was more useful and did give me the number for the 'New Estates Team' (0800 616866) - however when I called them I was told they can't deal with end users and I need to speak to my ISP...which is interesting as that's BT who I've so far spent 5 hours trying to communicate with. 
    I then tried to call Openreach but once again they won't speak to end users...
    So the current position is;
    1) I have no phone line
    2) The estate has no BT infrastrucutre
    3) I have complained via Twitter (36hrs response time) and the normal complaint channel (72hrs reponse time)
    4) 5 Hours worth of calls (at a cost to me)
    5) 1 days holiday taken for no reason
    6) The additional cost of childcare (approx £150 a week) 
    7) Having to work in the office until midnight most evenings
    8) I had to spend another 45mins talking to the accounts team, as they'd tried to take directdebit for the service!
    The average time to actually get to speak to an 'agent' is 12mins, then 4-5mins to verify details, then 3mins for them to read the screen, then 3mins of them mumbling in an extrememly hard to hear accent. Eventually you explain the situation again, they pause, carry on with their script, you ask to speak to a supervisor...they also can't help.
    There is without a doubt a problem in the process for getting a new estate setup, I really hope that somehow, via some method I manage to speak to someone who can help!

  • Can not change vendor when creating a new Development Component in NWDS

    Dear friends,
    Im trying to create a new Development Component in NWDS. Our NWDS is connected to NWDI and we are using CM Services option of NWDI.
    Before I could create a DC and change the vendor but now I cant change it anymore. Now, the vendor is by default sap.com and we cant change it and it seems that we also have to put our project in a separate directory. home/ directory or other directories in the list.
    See below screen shots...
    If I make a new DC than we see it like this: home/bpm_test [sap.com].
    If I make a new DC in my LocalDevelopment I can change the vendor and I dont have to choose a home directory.
    Do you have any idea how to change that?
    Any help would be greatly appreciated.
    Thank you in advance,

    HI,
    it seems that the vendor is defined in the NWDI track. That's why you can't change it.
    regards,
    Vasils

  • I opened a new developer account but shows The item you've requested is not currently available in the U.S. store.

    i opened a new developer account but shows The item you've requested is not currently available in the U.S. store.

    actually my ios developer account has been approved two days ago, and transfer an app from other account. when i try to enter my user account via iTunes then it shows "Item Not Available, The item you've requested is not currently available in the U.S. store." So what should i do??!!

  • Setting up a new developer account has wrong name listed in personal information with no option to edit

    In the process of setting up a new developer account, getting to step #2 & reviewing the personal information, the first & last name listed for my Apple ID is incorrect, however it is correct on the Apple ID settings page, as well as all of my iTunes billing information. How can this be updated? I don't want to create a developer account and be listed with the wrong name!

    Please read before you post.
    Contact [email protected] to investigate signup issues.

  • I am a new developer in iOS, need info about iTunes Store

    I am a new developer in iOS, I have created an weather app just to show recruiters about my work and to get the work or job from them.
    This is not for sale, i know apple provide built in weather app.
    Can i add this app to iTunes store.

    You can add apps to the store, but you will be better off asking in the developer forums : https://devforums.apple.com/index.jspa

  • New develop engine

    I just have to insert this thought into the discourse: The new develop module in Lightroom 4 is the best I have ever seen. My work flow always includes Photoshop, and I haven't processed an image without the round trip, developing in Lr, tweaking in Ps, and coming back to Lr to print. Lately I have beenalmost satisfied in Lr alone. Even my standard sharpening routine seems almost irrelevant.
    Great work Lightroom team!

    KateMann wrote:
    The new develop module in Lightroom 4 is the best I have ever seen.
    I'm pretty enamored by it too .
    Although I don't always like everything about it...
    KateMann wrote:
    Even my standard sharpening routine seems almost irrelevant.
    I find it fascinating sometimes how a picture can look sharper, even though "technically" it's not - just "clearer" and more detailed...
    KateMann wrote:
    Great work Lightroom team!
    Truly an amazing job well done - very much respected and appreciated...
    And I mean every word of it - y'all remember this in the future when I'm expressing my objections and challenges .
    Rob

  • What is required when adding references when building up a new development computer?

    I just took over an existing project from another developer. I am using Visual Studio Ultimate 2012 Update 4
    I am trying to set up a new, clean, development machine but this project has references to ComponentOne Studio for WinForms software for which I cannot find the install programs. I do have access to the actual DLL files that are referenced in project. 
    Can I simply copy the referenced DLL files from the old development computer to a folder on my new development computer and add a reference to them in my project or am I actually required to install the Studio for Win Forms product to get access to these DLLs
    for the reference?
    Thanks in advance for any help.
    Dave

    Hello Dave,
    Thank you for your post.
    I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    Because the dll that you want to reference is the dll of
    ComponentOne Studio for WinForms software which is third-party, I suggest consulting your issue on ComponentOne forums:
    http://our.componentone.com/groups/ for better support.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Importing a DC and Creating a new development component

    Hi,
    After importing a DC and Creating a new development component, my netweaver developer studio is complaining that the com.sap.tc.webdynpro.progmodel.api.* cannot be resolved.
    And the strange thing is that if i create a local project and then create a development component, the API can be resolved without any problem.
    Can anyone advise what i should do to fix this problem ?
    Thanks.
    Best Regards,
    Daniel

    Hi Daniel
        Go to your project properties and then go to Java build path and in that Libraries tab there you can find number of JARs included in it for reference of the project just compare both imported and newly created projects and try to add the missing JARs in the imported project
    thanks
    Ninad

  • SRM PORTAL add new develop.

    Hi  Masters.
      SRM 5.0 no Netweaver portal used, the portal own the SRM. 
    The requirement is add a new functionality,  the new develop was development in compositon enviroment
    the quiestion is.
    how that new development is link through the portal SRM, any documentation is valuable to me.
    Thanks.

    hi thanks.
    when I see nwds>file>new-->other, I don´t see anything called java script.
    please see this links, is my nwds.
    http://www.mialbumdefotos.com/fotos/@32190/128570/
    http://www.mialbumdefotos.com/fotos/@32190/128569/
    thanks so much.

  • [ANN] New Developer Poll on JDeveloper home page

    Check out the new developer poll and let us know where do you deploy your J2EE applications.
    http://otn.oracle.com/products/jdev

    The comments on the blog center on why Hibernate was not included, which I would have liked to see also.
    What I wonder about is what these numbers actually represent. I think you would get very different results from a poll on TheServerSide or anywhere other than technet. I mean, I would never have heard of BC4J if we hadn't tried JDeveloper as an IDE, which we probably wouldn't have bothered with if we didn't already license a lot of technology from Oracle, making JDeveloper a no-additional-cost solution for us. Similarly for TopLink, if we didn't already have a Smalltalk application that uses TopLink, I think it would have been unlikely that we would have understood how much it can do for us. And even then, we weren't going to use the Java version until Oracle bought it and it suddenly became another no-additional-cost solution. What I'm saying is, if we weren't already an Oracle shop, we'd probably be working with Eclipse and Hibernate. I actually think that JDeveloper and TopLink will provide us with a more robust solution, but I'd feel better about the long run if I thought that this approach was gaining more acceptance in the industry as a whole.
    TopLink may have brought a fair number of not-necessarily-Oracle people with it, but I'd like to see JDeveloper and UIX used by people who don't already think of themselves as an 'Oracle shop'. If we were using BC4J, I'd feel the same way about that. Unfortunately for JDeveloper, unless Oracle can find a way to market it better, I think the wider acceptance of technologies like UIX and BC4J may not come until you can use them as easily with other IDEs as you can with JDeveloper.

  • New Development System

    Hi, just wanted to bounce some ideas off you guys.
    We are about to create a new ECC 6 system initially a sandbox system for blue print then a Dev system.
    My organisation as a global finance SAP template that we will use.  So the steps would be a fresh install, then install the global finace templete, not sure how but will probably a system copy.
    We also have another stream of work being undertaken in another part of the organisation which is all being done in its own landscape.  We need to split out some of this functionality to use on our system (about 2000 transports). 
    I don't want to copy all of this work over to the Dev system probably from their QA system as it has a load of master / transaction data, but it will give everything we require OK we would need to some clean up work.
    The other option would be to selct the transports that we require and apply them, sequencing will be a issue,
    Ideally I guess the best solution is for all the work to be performed again in the new Dev system
    Its a tricky one, I need the fucntionality but want to keep the system as clean as possible.  The QA system will be built on the transports from Dev.
    Any thoughts appreciated,
    Thanks

    Ideally I guess the best solution is for all the work to be performed again in the new Dev system
    You will be right on this.  Problem w/ a "easy" solution via transport is that you may run into cross development with the same object fighting eachother.  This could result in unexpected behavior in the system, which would turn into a diagnostics nightmare.
    We are currently in middle of upgrading to ECC 6.0.  The plan here inhouse is to actually freeze all modifications for period of 1 quarter, allowing only production fixes only.  This would minimize the number of transports that we have to manually consolidate.

Maybe you are looking for