New Document Size GB not MB

Why when i open a new document (starting from a blank canvas) at 300x300; my Image Size starts at 23GB and not MBs something doesnt seem right and my font size is EXTREMELY tiny?

Could be one of two things:
1.) If your document is 300x300 inches, the text is going to look tiny because the file is so big.
2.) You're default text could be really small. Double click on your Type layer to select all of the text and then change the point size in the Control panel at the top of your screen.

Similar Messages

  • New Document panel does not accept inputs

    I am new user of InDesign, newly installed.
    I cannot get the "New Document" panel to accept any keyboard entries except "Page size" label, "Orientation" and "Number of Pages".
    It will not accept width, height, column numbers or margins.
    Is there some setup procedure I am missing?
    Joe@

    Hi,
    Just want to confirm is it when you in InDesign clicked to file---> New---> Document?
    Are the fields coming gayed out(uneditable) or there are not fields.
    You can try trashing your preferences to begin with.. they may got corrupt...
    steps to trash preferences...
    Troubleshooting 101: Replace, or "trash" your InDesign preferences
    Let us know if it still persists....
    ~Monica

  • My Open 'New Document' function is not working properly on Illustrator CS5

    When I open a 'New Document' a message pops up saying 'Print.ai' is not working, I wanted to open a custom 'New Document Profile' not print.  The custom option is grayed out and I cannot select it.  What do I do?

    If you can create a new document by any means, then set up the document the way you want the preset to be, and save the file here:
    ~/Library/Application Support/Adobe/Adobe Illustrator CS5/en_US/New Document Profiles
    You might need to delete/replace the faulty Print.ai file.

  • New Document size

    Hi everyone,
    I am trying to figure out how to setup the next document:
    Bleed: 8.625" X 11.125"
    Trim: 8.375" x 10.875"
    Live Area: 7.875 X 10:375"
    I am not sure, but I created the document size of the bleed: 8.625" X 11.125", but then I added bleed .125"
    I am very confused. Please any help?
    Thanks,
    J

    Stix Hart wrote:
    ...set a margin0.25 in from the edge and don't design outside that, that is the "live" area...
    Of course you should feel free to design outside the "live area," just don't put anything critical outside it.
    Bleed allowances are added to protect against misalignment of a page in the cutter. If the page is shifted so the cut is outside the theoretical page boundary on one edge, it will be cut inside the theoretical boundary on the opposite edge by an equal amount, so the "safe zone" is the area that will still be left in the worst case scenario if the cuts are off on all four sides on different sheets.
    In this case, the printer is recommending an additional .125 inches all around so your important content cant be closer than .125 to any edge under the worst conditions. You might want to add even more. Note that in a quality printing and binding operation it would be rare to see a full .125 shift with press output, but it isn't outside the realm of possibility for output from a color coper or other digital printing method.

  • Issue with new documents size ?

    I open a new document at a resolution of 300 and the file size and view of the document on screen at 100% looks like a 75 resolution document . I think there is a bug or error in the program .How might this be fixed ?

    Also, here:
    i tried one with a 75 res and one with a 300 res and the doc file and doc size is identical at 100% on screen .
    you are confusing two different kinds of resolution. If you set the size in pixels, that is an absolute size no matter what ppi resolution you choose. 75 or 300 ppi makes no difference at all until it's time to print. In either case your document is going to be 315 pixels high by 850 pixels wide. The same number of overall pixels either way. The ppi just tells the printer how much to squoosh them together.
    If, on the other hand, you set a size in inches/cms, then choosing a different ppi  at the start will radically change the pixel dimensions of the file. So a file which is 5" x 10" at 100 ppi will be 500 pixels by 1000 pixels, while a 5 x 10  set up at 300 ppi will be 1500 pixels by 3000.

  • Add new document link not working in upgraded sharepoint 2013?

    Hello there,
    Upgraded SharePoint team sites from 2010 to 2013. add new document link not working for shared document in upgraded sharepoint 2013?. it is specially not working on machine where Office web apps set up with this sharePoint server and it
    is working fine with environment  Office web apps not configured with Sharepoint.
    Looking resoluion /suggestion, thanks in advance.
    Regards,
    Sushil

    Hi  Sushil,
    According to your description, my understanding is that the add new document link was not working on machine where Office web apps set up with this SharePoint server after you upgraded SharePoint team sites
    from 2010 to 2013.
    For your issue, it can be caused by integrating Office Web Apps with upgraded SharePoint Site.
    Firstly please make sure claims-based authentication is used by the SharePoint web application that is used to create the new document. Only web applications that use claims-based authentication can open
    files in Office Web Apps. To determine the authentication provider for a web application, follow these steps:
    1.In SharePoint 2013 Central Administration, click Manage web applications.
    2.Select the web application that you want to check, and click Authentication Providers on the ribbon.
    The authentication provider must be displayed as Claims Based Authentication for Office Web Apps to work correctly with the web application. To resolve this issue, you can delete the web application and recreate
    it using claims-based authentication, or you can change the authentication method of the web application.
    Secondly, make sure the WOPI zones match on the SharePoint 2013 and the Office Web Apps Server farm.
    To do this, run the following command on the SharePoint Server:
    Get-SPWopiZone
    The result will be one of the following:.
    internal-https
    internal-http
    external-https
    external-http
    Next, run the following command on the SharePoint Server.
    Get-SPWOPIBinding
    In the output, look for WopiZone: zone. If the results from Get-SPWopiZone don’t match the zone that is returned by Get-SPWOPIBinding, run the Set-SPWOPIZone -Zone cmdlet on the SharePoint Server to change
    the WOPI zone to match the result from Get-SPWOPIBinding.
    If not work, you can try to disconnect SharePoint 2013 from Office Web Apps Server and re-configure Office Web Apps for SharePoint 2013.
    For more information, please refer to the article:
    http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Changing Resolution and Document size

    Hello - I have a jpeg from a digital camera that I Saved As photo.psd with an original Document Size of 44" x 66" @ 72 ppi resolution.
    I am using CS3 and I want to prepare the photo for printing while maintaining the highest quality possible. The first thing I did was uncheck Resample Image. Then I changed the resolution to 300. This gave me a Document Size of 10.56 x 15.84.
    I want to enlarge the Document Size to 16" x 24" (the same proportions). So, it seems to me that the next step is to now check Resample Image and put in my new Document Size of 16" x 24". I would then apply some Unsharp Mask as desired.
    So, should Ifollow the steps above or do you recommend a different workflow?
    I've read that Photoshop will upres very well up to 200% and all I need is 166%, so it should work ok. Also, do you recommend standard Bicubic or Bicubic Smoother?
    TIA

    What you're suggesting will work, though you don't really need to do it in multiple steps.  One step, with resampling checked, once you set all the fields as you want, will do the trick.
    And for all the hype and mystery surrounding the two alternate choices for resampling, in all my work for minor resampling I always find I prefer Photoshop's original Bicubic method.  For extreme upsampling I prefer, personally, a plug-in called Genuine Fractals.
    Also, modern print drivers are getting very good at size matching...  If the image quality in your file is to your liking, you COULD just set the print size in inches (without resampling) and be done with it.  This would yield an image at a resolution lower than 300 pixels/inch, but would save you some work, and it may very well be that you will not be able to see any difference by letting the driver do the resampling as needed.
    -Noel

  • Default Document Size

    I recently was working on a design for a #10 commercial envelope in InDesign. Ever since then, it seems that #10 envelope has become the default document size that InDesign selects when I create a New File. How can I change the default new document settings?

    Jongware: "You change the default for new documents the same way as just about everything else in InDesign: change it with no documents open. In the case of a default new document size, close all documents, then call up the Document Setup dialog. Set you size and OK the dialog. Done."
    I don't get that behavior. If I call up Document Setup, set the size, and OK the dialog,  then close the document, the new setup is not saved. I think it's better to call up Document Setup, set the size, and then click the Save Preset button; save the Preset as [Default] in the pop-up menu so that it overwrites the previous Default setting.

  • HELP: Illustrator CS2 New Document Presets

    I frequently use illustrator for a variety of page layouts and different projects. My problem is that the list of preset document sizes in the "New Document" dialog is not much help to me, it contains all the wrong paper sizes and I would like to change that.
    Does anyone know a way to edit this list so I can have my own presets available each time I create a new document?

    Look up Templates in the online help.
    JET

  • New document Type for bank Transaction

    Hello Gurus
    My client place , If I post any Bank Transactions the system accepting for only  BP/BR Document type
    Now I am define new Document type , in this new document type itu2019s not accepting ( bank receipt )
    System shows some error message:
    Document Type should be BP / BR for Bank Transactions
    Message no. Z_FI005
    So  I Want to post bank transaction in new Document type also , what type of configuration shall I do
    Can Any one give me the solution
    Regards
    SRI

    Dear Sri,
    It seems that Validation has been defined in your system to prevent another document type to be used for the banking transaction....
    You can check validation defined in transaction GGB0...
    Check the validation assigned to your company code in transaction OB28..
    Regards,
    Chintan Joshi

  • Document Library - Workflow not starting on copied Word Document

    HELLO EVERYBODY!
    Right, got a weird issue on a Document Library, where if the Document Library already contains a Word Document with a Title of 'Document 1' and i download the document, make a change and re-upload it. The document uploads as a new separate file but it retains
    the same 'Document 1' title.
    My problem is that for some reason SharePoint isn't seeing this newly uploaded document and therefore it is not running the workflow on it?
    This really confuses me, as it will work with new documents, but it will not work if you download a Word document, change it and re-upload the document as a new version, the workflow will not start.
    Any ideas are welcome.
    Thanks,
    Tucker

    Hi Tucker,
    According to your description, my understanding is that the workflow which was set to start when an item is created cannot start when uploading a copy of a document existing in the library.
    I tested the same scenario per your post, and the workflow can start automatically.
    As the workflow can start automatically when uploading a new document, it is not the issue with the workflow.
    I recommend to verify the things below:
    Did you upload the copy with a new name as a separate file or as a new version to the existing document to the library?
    Test with a new library and a new document to narrow the issue scope.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • I want to migrate my custom new doc sizes from cs6 to cc/cc2014

    I want to migrate my custom new doc sizes from cs6 to cc/cc2014 where can i find that file to copy to new versions of Photoshop?

    Yes it look like Adobe migrate presets misses your new document size presets.  I was able to copy my "New Doc Sizes.psp" preference file from CC preferences to CC 2014 preferences a manual migrate at best.

  • IOS Pages & Keynote - New Document spins and that's all...

    On both iPad and iOS, my Pages and Keynote applications have started hanging, when trying to open a new template - even blank! I have removed the applications and reinstalled. It clearly is fresh, since I have to reload documents and reinitiate the iCloud choice. But the new document behavior has not changed.
    It just spins....

    Looks like it's an iCloud problem. I turn that off, it goes away.

  • When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging

    Contexts: I am very competent with GFX and have worked on many projects.
    When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging in the same render. It snaps again. I don't want to re-size from the canvas dimensions, I want to resize from the render's original dimensions.

    Ap_Compsci_student_13 wrote:
    ok sorry but doesn't sscce say to post the whole code?the first S is Short, and yes, it needs to be all the code needed to illustrate the problem and let use reproduce it. If you were developing a new Web framework, your example might be short, but for a student game it's very long.

  • Copy & Paste From Illustrator to Photoshop not matching document size

    I just recently reformated my computer and I've been having an issue with copy and paste from Illustrator to Photoshop. Before I could copy a 2"x2" vector box from Illustrator into photoshop making a new document and the size and resolution would match. That is the new document would say 2"x2" at 300 ppi in photoshop and the preset would read "clipboard". I would then hit ok and paste and it would match perfectly. Now since I've reformated, photoshop always creates a new document with the wrong size regardless of the settings I enter in Illustrator or photoshop. I have document raster and effects set at 300 ppi in Illustrator and I have the new document set at 300 in photoshop, but it always transfers the 2"x2" box as some other size no matter what resolution I change it too. Again this used to work before so I'm assuming there is some setting I forgot about. Does anyone know? The main issue is the clipboard preset is not matching the document size, its almost as if Illustartor is telling photoshop it's a different resolution when it's not. Copying to 72 ppi seems to have no issue, which makes me think Illustrator just isn't sending it out at 300 ppi, but I don't know why as I have the document set at 300 ppi.

    Have you found an answer that wasn't posted here yet? I have the same issue.

Maybe you are looking for