New DP on winsrv2012r2 - TS failing with error 0x80091007

Hi All,
I need your advice about a really weird issue. We replaced a 2008r2 file server which was also a DP in one of our remote sites it was working well. The new server is on 2012r2 and I reinstalled the DP on it. I need to precise that all of them are are
hosted on VMware 5.1 (esxi-vsphere). I distributed all the needed packages on this newly created dp and tried to setup a vm to test the task sequence and I noted that the win download was very very quick (3-4mins for a quite big wim
file 24gb). in my tests all attempts failed at the end of TS when applying system image with the error code 0x80091007. I need to precise that I choose the E1000 Nic in VMware and 4gb of memory so normally there should not be any issue. I tried also
with a vmxnet3 nic but it wasn't detected at the beginning of TS even if my boot image contains the VMware drivers ..(that's one of the weird point) . But the weirdest point is that I asked one of my colleague to give it a try and at his first attempt he was
successful using exactly the same vm I tried to setup ... but all is other attempts failed afterwards. Do you know what could be the cause ? Could it be linked to the fact that the dp was setup on 2012r2 when the primary site and all others sccm
servers are on 2008r2. Also our forest functional level is still on 2003 so am wondering if that could be the explanation.
Here are all the logs (failed and success one ) which were all from the same dp on 2012r2:http://www27.zippyshare.com/v/83975219/file.html
So after trying all ideas (Redistributing the images on the dp.. validating them... even recreated the dp completely I decided to setup a dedicated server on 2008r2 and it worked at first imaging attempt but I would like to understand what was the cause
if possible that's why I would like to get your advice on that. thx in advance. best regards.

Hi,
There error translates to "The hash value is not correct."
Have you seen this post on the topic.
https://social.technet.microsoft.com/Forums/en-US/77783490-82a9-4dd1-9ea8-ca11c37f3ee6/sccm-2012-osd-task-sequence-error-0x80091007?forum=configmanagerosd
Solving the vmxnet3 nic sounds like a neeeded solition.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Similar Messages

New MBP 15", Windows installation fails with error 0x80070570 or 0x80070570D

Hey guys!
I finally got a new MBP a few weeks ago, and I wanted to install a Windows partition for some games. I have tried this with several different windows copies (both legal and illegal, and both of windows 7 and windows 8), but to none avail. The exact error message I keep getting is:
Windows 7:
"Windows cannot install required files. The file may be corrupt or mossing. Make sure all files required for installation are available, and restart the application. Error code: 0x80070570"
Windows 8:
"Windows cannot install required files. Make sure all files required for installation are available, and restart the application. Error code: 0x80070570D"
Any help will be greatly appreciated!

I've let the bootcamp utility put the disk images on the USB. As I mentioned before, I got the Windows installation images through various legal and illegal sources and made several attempts with each and evere disk image, so that should not be the cause.

OSD Task Sequence Fails with Error 0x80091007

Hello Everyone,
I have a bit of a weird hash mismatch problem. The issue is only occuring on one laptop. The laptop was imaged successfully, new out of the box. Computer started "acting craptacular" according to the tech, so he tried to reimage it,
assuming one of the applications he put on the computer while setting it up for the user may have messed it up.
From that point forward, the computer couldn't image anymore. I can image the same model, TS, and even other models without issue. The error logs are pointing to a hash value mismatch on the OS WIM.
Here are the log files - I wish there was a way to make them cleaner. I ran some hardware tests with IBM's PCDoctor, and it came back clean. I'm starting to run out of ideas.
Thanks in advance!
Log: (SMSTS.LOG)
Download done setting progress bar to 100 ApplyOperatingSystem 5/14/2010 4:09:31 PM 840 (0x0348)
Hash could not be matched for the downloded content. Original ContentHash = A6170DC8CFC5A443636828F093C45377B5FE2A62, Downloaded ContentHash = 7DEBC67B90C2326031EF8727238176C92A02006C ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
0L == TS::Utility::VerifyPackageHash(pszContentID, sDestination), HRESULT=80091007 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2901) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
DownloadContentAndVerifyHash(pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, pszUserName, pszUserPassword ), HRESULT=80091007 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,3000) ApplyOperatingSystem 5/14/2010
4:09:53 PM 840 (0x0348)
DownloadContentLocally(pszSource, sSourceDirectory, dwFlags, hUserToken, pszUserName, pszUserPassword), HRESULT=80091007 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,3128) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
ResolveSource(pszSource, sSourceDirectory, dwFlags, 0, 0, 0), HRESULT=80091007 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,3029) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
TS::Utility::ResolveSource( this->packageID, this->packagePath, TS::Utility::ResolveSourceFlags::PersistContents ), HRESULT=80091007 (e:\nts_sms_fre\sms\client\osdeployment\applyos\installimage.cpp,1255) ApplyOperatingSystem 5/14/2010 4:09:53
PM 840 (0x0348)
resolvePkgSource(), HRESULT=80091007 (e:\nts_sms_fre\sms\client\osdeployment\applyos\installimage.cpp,1299) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
Installation of image 1 in package RH1000DD failed to complete..
The hash value is not correct. (Error: 80091007; Source: Windows) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
installer.install(), HRESULT=80091007 (e:\nts_sms_fre\sms\client\osdeployment\applyos\installimage.cpp,1373) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
Entering ReleaseSource() for C:\_SMSTaskSequence\Packages\RH1000DD ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
The user tries to release a source directory C:\_SMSTaskSequence\Packages\RH1000DD that is either already released or we have not connected to it ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
InstallImage( g_InstallPackageID, g_ImageIndex, targetVolume, ImageType_OS, g_ConfigPackageID, g_ConfigFileName ), HRESULT=80091007 (e:\nts_sms_fre\sms\client\osdeployment\applyos\applyos.cpp,360) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840
(0x0348)
Process completed with exit code 2148077575 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
!--------------------------------------------------------------------------------------------! TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Failed to run the action: XP SP3 - Multi-HAL.
The hash value is not correct. (Error: 80091007; Source: Windows) TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Sending status message . . . TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Send a task execution status message SMS_TSExecution_ActionFailError TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
MP server rh1-sccm.ritehite.com and port 80. SSL=false. CRL=false. TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Site code: RH1 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Client machine name: R842AEYa TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Client Identity: GUID:428CFC8B-1BE1-4E11-B2C4-21E31EA71572 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Advertisement ID: RH1200C2 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Package ID: RH1000DF TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Sending StatusMessage TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Formatted header: TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
<Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>56d444c9-6bf0-4ed2-86a9-5f199c90924c</SourceID><SourceHost/><TargetAddress>mp:[http]MP_StatusManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2010-05-14T21:09:53Z</SentTime><Protocol>http</Protocol><Body
Type="ByteRange" Offset="0" Length="4246"/><Hooks/><Payload Type="inline"/><TargetHost/><TargetEndpoint>StatusReceiver</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg>
TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
CLibSMSMessageWinHttpTransport::Send: URL: sccmserver.x.com:80 CCM_POST /ccm_system/request TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
The request has succeeded. 200 OK TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Set a global environment variable _SMSTSLastActionRetCode=-2146889721 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Clear local default environment TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Let the parent group (Apply Operating System) decides whether to continue execution TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Let the parent group (Install Operating System) decide whether to continue execution TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
The execution of the group (Install Operating System) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Failed to run the last action: XP SP3 - Multi-HAL. Execution of task sequence failed.
The hash value is not correct. (Error: 80091007; Source: Windows) TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Sending status message . . . TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
Send a task execution status message SMS_TSExecution_TaskSequenceFailError TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)

Hi Guys,
My WIM is currently sitting at 1.8 GB, so I'm not sure it is the 4 GB bug you were referring to.
I haven't tried a re-import/update DP yet mainly because the problem is occuring on only
one computer at this moment. In fact, I have deployed several computers already with the same DP, same WIM and even the same model of computer. That makes me think it isn't an issue with the WIM as
much as it is an issue with the computer itself.
Can you guys think of anything on the computer that would cause the failure?
Thanks again,
Sean

Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

HT1212 I am unable to get our of a continuous cycle when trying to update or restore my iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.

When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

Hi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan

Windows 7 update fails with error 8000FFFF

I've got a Windows 7 x64 installation that I've had for around three months. Everything has been fine and working up until a few weeks ago. When I run Windows Update it finds updates and allows me to select them, but when I run the install it fails with error 8000FFFF. Update used to work, but then suddenly quit.
I've dug through tons of forum and web sites regarding this specific error, but they all of their solutions do nothing to fix my problem. In frustration I decided to put in a spare hard drive and install Windows 7 from scratch. I did that and the first thing I tried to do after logging in was updates and it failed for the same reason (8000FFF).
I have the same situation with a Windows Storage Server 2008 x64 that I have as well. It has been runing for about six months or more and updates were working fine. Then update started failing for the same or some other reason about the same time. On this machine I can start the update and see it report a percentage downloading the update. It gets to about 5 or 6 percent and then fails.
Is there some possible networking issue at play in my situation? I have earlier Windows versions (XP, XP64, Svr 2003 and Svr 2003 R2) and updates work fine on those. I know those are using a different mechanism, but I do not notice any other kind of networking issues from my house to the Internet. I have not changed anything or any settings in my firewall at all. Is there some specific protocol, port or something that has to work prefectly in order for the new Windows update to work?
All of my machines are pretty much Intel based. Win7 box is a Core2Duo on an EVGA 680i motherboard. The servers are Intel Xeons with Intel motherboards, chipsets and nics.
Thanks for any advice and help

Wow, suddenly I have the same bizarre error at 11% of downloading, then error #8000FFFF.
Fix IT, registry keys and SoftwareDistribution folder cleaning, uninstalling previous updates, manual downloading of appropriate updates and attempt do install it and creating/deleting user profiles - don't work at all.
Any new ideas?
Thanks,
Win7 x64 SP1
Package KB2633873 failed to be changed to the Installed state.
Status: 0x8e5e0408.Windows update "Security Update for Windows (KB2633873)" could not be installed because of error 2388526088 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\Wiewior\Downloads\Windows6.1-KB2633873-x64.msu"
Package KB2645640 failed to be changed to the Installed state. Status: 0x8e5e0408.
Windows update "Security Update for Windows (KB2645640)" could not be installed because of error 2388526088 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\Wiewior\Downloads\Windows6.1-KB2645640-x64.msu"

Windows 8 backup (Win7 File Recovery system image) creation to NAS device fails with error 0x807800C5

Hi,
I have a ZyXEL NSA310 NAS device on my network that I use for backups (as well as a media server). I have been very happy with it as, amongst other things, it has a gigabit Ethernet connection. I recently upgraded my home laptop from Win7 Pro to Win8
Pro. Under Win7 the NAS device worked perfectly as the backup target. I could back up file sets and - most importantly to me - create a system image on the device should I need to restore the system in the event of a full disk failure.
When I upgraded to Win8 it kept the Win7 settings and it looked like it was just going to work, then as it came to create the system image it failed with error code 0x807800C5 and message "The version does not support this version of the file format".
I have searched the internet and seen that others have had similar issues on Win7 and Win8 with NAS devices where they have had to hack the device to get it working - though it isn't clear that this has been successful for everyone. This isn't an option
for me as the NSA310 is a closed device and in any event I don't see why I should have to hack the device when clearly this is a Win8 issue (since Win7 worked perfectly).
Does anyone have any ideas how to fix this issue so that I can create the full backups I require?
Thanks,
Phil
Event Log messages:
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          13/01/2013 23:14:52
Event ID:      517
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Home-Laptop
Description:
The backup operation that started at '‎2013‎-‎01‎-‎13T23:13:43.523158000Z' has failed with following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for a
solution, and then rerun the backup operation once the issue is resolved.
Log Name:      Application
Source:        Windows Backup
Date:          13/01/2013 23:14:56
Event ID:      4104
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Home-Laptop
Description:
The backup was not successful. The error is: There was a failure in preparing the backup image of one of the volumes in the backup set. (0x807800C5).

Thanks willis! I will look into the iSCSI route. A quick Google search and I can see some mention of the NSA310 and iSCSI so maybe it does support it.
One question: Have you ever attempted to restore a system image from a NAS iSCSI device with a Win8 Restore Disk? Is it easy? I just want to be sure that it is possible to do so in case the worst happens and I need to restore the entire image onto a
new disk.
Hopefully Microsoft will fix the issue with the standard NAS setup with an update in the future, but I don't want to wait for it.
Thanks again,
Phil
Hi Phil, No I have not had to do this yet, but I see no reason why it shouldn't work as the iSCSI disk looks just like a regular hard disk to the OS. I agree that Microsoft should fix the direct NAS support as the iSCSI approach does have the downside
of dedicating a fixed chunk of your NAS drive to the iSCSI disk that you have to choose when you create the disk whereas the direct NAS just uses the actual space currently needed by the backup. Also I had some trouble getting authentication (access rights)
to work so I left the iSCSI portal as open access - which is OK for a home solution but not a good idea in general. I will revisit this for my own setup and see if I can get it working but just wanted to mention it in case you have the same issue. It manifests
itself as not being able to connect to the iSCSI portal due to failed authentication when running iSCSI initiator setup.
-willis

8.1.6 install fails with Error 1321 Installer has insufficient privileges -

Adobe Reader “Check for Updates” identifies “Adobe Reader 8.1.6 (CPSID_49167)” as “Available”.
Installation fails with “Error 1321.The Installer has insufficient privileges to modify the file C:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\Search.api.”
Reboot tries to complete install adding unwanted desktop icon, but CPSID_49167 still shows as “Available” and MSI29706>LOG(s) show above error.
XP SP3 Home, IE7, Adobe Reader 8.1.5

Thanx kashifMohd,
Downloaded the fix, vetted it, and before creating a new Administrator account used the following recipe with success:
1. Ran downloaded fix with usual Admin Account and got the “Error 1321 for Search.api.” as before, but now there is a pop-up asking "Retry" or "Cancel" that did not appear when using "Get Updates" function from running Adobe Reader. Replied "Cancel".
2. Rebooted, and disabled Kaspersky Anti-Virus.
3. Again ran downloaded fix with usual Admin Account and got Error 1321 for different file: "C:\Program Files\Adobe\Reader 8.0\Reader\plug_ins3d\3difr.x3d" with pop-up asking "Retry" or "Cancel".
4. Clicked "Retry" this time and installation completed successfully.
Thanx again.

The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

SCCM 2012 CU2 OSD forest trust: ReleaseRequest failed with error code 0x87d00317

Hello,
Actually i have a difficult Problem with my SCCM 2012 R2 CU2 Windows 7 x64 SP1 Tasksequence:
I get the folowing error in smsts.log:
::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\utils.cpp,811) TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
RegQueryValueExW is unsuccessful for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
GetTsRegValue() is unsuccessful. 0x80070002. TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
End program: TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Finalize logging request ignored from process 1736 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Waiting for CcmExec service to be fully operational TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
CcmExec service is up and fully operational TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Access handle will be read from _SMSTSActiveRequestHandle TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Access handle: {B699D570-B2BF-4874-8CB7-3B208B380969} TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Attempting to release request using {B699D570-B2BF-4874-8CB7-3B208B380969} TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
CoCreateInstance succeeded TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=87d00317 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136) TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
ReleaseRequest failed with error code 0x87d00317 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Task Sequence Manager could not release active TS request. code 87D00317 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Here is the complete smsts.log: http://1drv.ms/1pwTEBf
To explain the Problem in Detail:
The SCCM Primary Site Server and the Clients are in different trusted (bidirectional) forests!
Everythings working fine in this Scenario, I can install SCCM Agent on the Clients with Manual ccmsetup and with Client Push Installation. Additionally i can deploy Software Updates and so on... only OSD is crashing in the releaserequest step.
During my Tasksequence new Clients are joined to Domain A while SCCM Primary Site Server is installed in Domain B
If I change my TS and let the Clients also join Domain B everything works without any Problems and the Tasksequence finish without any Errors.
My Problem must be related to the different Domains and the forest trust.
My Setup:
MP published to DNS in both domains
Schema Extended in both domains
System Management Container published and verified in both domains
ccmsetup Parameters in TS: ccmsetup SMSMP=sccm.domain.b FSP=sccm.domain.b DNSSUFFIX=Domain.b
Network Access account configured with Domain B account
Domain Join account has create Computer rights on the OU in Domain A (Domain join is successful)
DNs conditional forwarders configured in both Domains and DNS resolutin is working in both directions
Any suggestions?
Many thanks.
regards,
Christian

Hi Christian,
So do you actual get an error message in your TS or is it just failing to join Domain B? (Could be both if the machines fails to join the domain).
Can you review netsetup.log on the machines after the issue and see what error message you might be getting during the domain join process?
Also, if it a domain join issue, can you try manually joining to domain B using the same service account?

FAILED with error NT_STATUS_NO_SUCH_USER

Setup:
OS X Server 10.3.9. PDC. ALL clients are a combination of XP and W2K. No macs (sadly).
Situation:
Over the last 3 years I've been plagued with this problem. Symptoms include new authentications are not granted access, but existing connections suffer no degradation of service. The simple solution has been to simply go into Server Admin and "Restart Service" on the Windows service. Done and done. However, this can happen anywhere from once a week to (up to) 3 times a day. Even on weekends when (likely) no one is in the building, though some users may not log out of their workstations - let alone shut down.
Troubleshooting:
1) I set the smbd logs to 1 (debug) and at the point of degrading, I only see this:
***** Begin: I changed nothing; I left out nothing ***********************
[2008/04/14 10:54:09, 1] authods.c:opendirectory_authuser(208)
User "bvolz" authenticated successfully with "dsAuthMethodStandard:dsAuthSMBNTKey"
[2008/04/14 10:54:09, 2] authods.c:opendirectory_smb_pwd_checkntlmv1(424)
opendirectorysmb_pwd_checkntlmv1: [-14071]opendirectoryuser_sessionkey
[2008/04/14 10:54:09, 2] /SourceCache/samba/samba-60.5/samba/source/auth/auth.c:checkntlmpassword(305)
checkntlmpassword: authentication for user [bvolz] -> [bvolz] -> [bvolz] succeeded
[2008/04/14 10:54:10, 1] /SourceCache/samba/samba-60.5/samba/source/smbd/service.c:close_cnum(841)
volzsql (192.168.0.3) closed connection to service Shared
[2008/04/14 10:54:11, 0] pdbods.c:getrecords(1015)
dsGetRecordEntry error (-14085)odssam_getsampwnam: [-14085]getsam_recordattributes dsRecTypeStandard:Users no account for 'jpiper'!
[2008/04/14 10:54:11, 2] /SourceCache/samba/samba-60.5/samba/source/auth/auth.c:checkntlmpassword(312)
checkntlmpassword: Authentication for user [jpiper] -> [jpiper] FAILED with error NTSTATUS_NO_SUCHUSER
***** End: I changed nothing; I left out nothing ***********************
2) Recently, I tried to change the default allowed connections per KB Article: http://docs.info.apple.com/article.html?artnum=107899 but that actually only seemed to exacerbate the problem. Today I removed the directories that were added in Netinfo Manager from the KB.
3) I also looked at the nmbd.log and frequently see this, which is equally as troubling:
[2008/04/14 10:44:29, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:sync_withdmb(154)
syncwithdmb:
Initiating sync with domain master browser VOLZSERVER<20> at IP 65.16.245.50 for workgroup VOLZINC
[2008/04/14 10:44:29, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:announce_local_master_browser_to_domain_masterbrowser(110)
announcelocal_master_browser_to_domain_masterbrowser:
We are both a domain and a local master browser for workgroup VOLZINC. Do not announce to ourselves.
[2008/04/14 10:44:29, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:sync_withdmb(154)
syncwithdmb:
Initiating sync with domain master browser VOLZSERVER<20> at IP 65.16.245.50 for workgroup VOLZINC
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:27, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:announce_local_master_browser_to_domain_masterbrowser(110)
announcelocal_master_browser_to_domain_masterbrowser:
We are both a domain and a local master browser for workgroup VOLZINC. Do not announce to ourselves.
This type of activity in the log is repeated over and over and over again.
Question:
How do I make it stop? Ok, to be fair, I've searched for the last few years for a solution and I'm not sure why samba is continuing to 'break.' Is there someone here that can enlighten me or poke me in the right direction to why this could be happening? I know little to nothing about samba. I DO know networking, and this could be the issue. The server was handed to me by the previous admin and so to rebuild (the easy solution) isn't so easy because the previous admin didn't document anything he did to build it, like NAT forwarding and such, which, if I don't put back into it, will cause MANY headaches. So, eventually I WILL rebuild from scratch (the time may be nigh), and I think it may fix a misconfiguration, but I fear it will be difficult. This is our production server with no test environment (other than using SuperDuper! to image the drive and play with it over a weekend or something).
Plea:
For help.
Edit: How do I suppress the wiki markup? It's butchering the posted log excerpts. <nowiki></nowiki> doesn't seem to work.

Turns out a printer driver installed on an XP (even W2K(?)) was (apparently?) flooding the OS X SMB server to the point of collapse. Uninstalling the "HP Tools" part of the driver cleared it up. The printer is an HP LJ1300. I had downloaded the full driver from HP.com. I don't know if any/all these conditions need to be matched, but: the printer was on the network using an HP print server JetDirect EX Plus, and the computer(s) in question were connecting directly to it (not via a print server). It's been too long ago, but there were always several errors in the System Log (Win XP Event Viewer) that correlated with the errors on the OS X server.
Proud to say that since that day (10+ months ago) I've not seen it happen again. whew.

SSIS custom execute sql task : Failed with error

I am developing a custom SSIS task for running sql task. But it fails with error - I'm trying to set the resultsetbinding to be used by next task in workflow.
Error: 0xC0014054 at CustomSSISTask: Failed to lock variable "User::id" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container
during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
Error: 0xC002F210 at CustomSSISTask, Execute SQL Task: Executing the query "SELECT id FROM sysobjects WHERE name = 'sysrowsets..." failed with the following error: "Failed to lock variable "User::id" for read access with error 0xC0010001
"The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is
not being created.".
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Warning: 0x80019002 at CustomSSISTask: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Task failed: CustomSSISTask
Here is the code sample I'm trying ,
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser,
IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
MessageBox.Show("testing:");
try
// Add the SQL Task
Package package = new Package();
package.Executables.Add("STOCK:SQLTask");
Microsoft.SqlServer.Dts.Runtime.Variable variable = package.Variables.Add("id", false, "User", 0);
// Get the task host wrapper
TaskHost taskHost = package.Executables[0] as TaskHost;
// Get the task object
ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask;
// Set core properties
task.Connection = connections[0].Name;
task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = 'sysrowsets'";
//task.SqlStatementSource =
// "SELECT PersonID from [AmalgaSpeedTableData].[SpeedTable].[DimPerson] where PersonIntID = '1'";
task.SqlStatementSourceType = SqlStatementSourceType.DirectInput;
// Add result set binding, map the id column to variable
IDTSResultBinding resultBinding = task.ResultSetBindings.Add();
//IDTSResultBinding resultBinding = task.ResultSetBindings.GetBinding(0);
resultBinding.ResultName = "variable";
resultBinding.DtsVariableName = variable.QualifiedName; //"User::id";
task.Execute(connections, variableDispenser, componentEvents, log, transaction);
catch (Exception ex)
throw new ArgumentException(ex.Message);
return DTSExecResult.Success;
It doesnt throw any exception but custom task fails.
Later I will be also using parametersetbindings to pass some input parameters to this task , since I'm stuck for out param - blocked moving ahead.
Any help would be greatly appreciated.
Thanks
Sang

Hi, could you check whether the following threads help:
http://stackoverflow.com/questions/5787621/ssis-package-failed-to-locak-variable-for-read-access-with-error-0xc0010001
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/40ee7eff-5ec1-426f-a1a8-ab85b40b51aa/error-variable-can-not-be-found-while-executing-package-from-the-net-code?forum=sqlintegrationservices
Regards, Leo

[事例紹介]Install MSI payload failed with error: 110 - 指定されたデバイスまたはファイルを開けません.

このようなインストールトラブルの解決事例がありましたのでご紹介します。
【問題点】
CS5.ｘ Windows 版インストール時、「インストールに問題があります Exit Code:7」エラーが発生。
エラーサマリーには以下のエラーが含まれていました。
【エラーサマリー抜粋】
----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
ERROR: 指定されたデバイスまたはファイルを開けません。
ERROR: Install MSI payload failed with error: 110 - 指定されたデバイスまたはファイルを開けません。
MSI Error message: 指定されたデバイスまたはファイルを開けません。
【解決方法】
これはMSI（Windows Installer）に関するエラーメッセージです。
Windows Installer を修復することで解決しました。
手順については以下を参照してください。
■Windows Installer の修復によるインストールトラブル対処方法（Windows）
http://kb2.adobe.com/jp/cps/890/cpsid_89088.html?sdid=JSRPP
この方法で解決しなかった、という方がいらっしゃいましたら、エラーサマリーをぜひ投稿してください。
なお、この解決方法は以下の文書にも掲載されています。
■「インストールに問題があります」エラーの対処方法（Creative Suite 5, 5.5）
http://kb2.adobe.com/jp/cps/894/cpsid_89463.html?sdid=JSRPP

The Error 1603 usually occurs due to insufficient privileges.
Try the following steps:
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave

703: Subdaemon connect to data store failed with error TT9999

All,
I'm getting the following error whilst trying to connect to a TimesTen DB:
connect "DSN=my_cachedb";
703: Subdaemon connect to data store failed with error TT9999
In the tterrors.log:
16:39:24.71 Warn: : 2568: 3596 ------------------: subdaemon process exited
16:39:24.71 Warn: : 2568: 3596 exited while connected to data store '/u01/ttdata/datastores/my_cachedb' shm 33554529 count=1
16:39:24.71 Warn: : 2568: daRecovery: subdaemon 3596, managing data store, failed: invalidate (failcode=202)
16:39:24.71 Warn: : 2568: Invalidating the data store (failcode 202, recovery for 3596)
16:39:24.72 Err : : 2568: TT14000: TimesTen daemon internal error: Could not send 'manage' request to subdaemon rc -2 err1 703 err2 9999
16:39:24.72 Warn: : 2568: 3619 Subdaemon reports creation failure
16:39:24.72 Err : : 2568: TT14000: TimesTen daemon internal error: Deleting 3619/0x1558650/'/u01/ttdata/datastores/my_cachedb' - from association table - not found
16:39:24.72 Err : : 2568: TT14004: TimesTen daemon creation failed: Could not del from dbByPid internal table
16:39:24.81 Warn: : 2568: child process 3596 terminated with signal 11
16:39:25.09 Err : : 2568: TT14000: TimesTen daemon internal error: daRecovery for 3619: No such data store '/u01/ttdata/datastores/my_cachedb'
I've checked and the datastore does exist and is owned by the timesten UNIX user.
ttversion:
TimesTen Release 11.2.2.2.0 (64 bit Linux/x86_64) (tt1122:53396) 2011-12-23T09:26:28Z
Instance admin: timesten
Instance home directory: /home/timesten/TimesTen/tt1122
Group owner: timesten
Daemon home directory: /home/timesten/TimesTen/tt1122/info
PL/SQL enabled.
Datastore definition from sys.odbc.ini:
[my_cachedb]
Driver=/home/timesten/TimesTen/tt1122/lib/libtten.so
DataStore=/u01/ttdata/datastores/my_cachedb
LogDir=/u01/ttdata/logs
PermSize=40
TempSize=32
DatabaseCharacterSet=AL32UTF8
OracleNetServiceName=testdb
Kernel parameters from sysctl -a:
kernel.shmmax = 68719476736
kernel.shmall = 4294967296
Memory / SWAP:
MemTotal: 2050784 kB
SWAP: /dev/mapper/VolGroup00-LogVol01 partition 4095992
I'm new to TimesTen and I'm planning on evaluationg it to see if it could solve an issue we're having. Any suggestions would be much appreciated.
Thanks,
Ian.

Hi Ian,
Can you please answer the following / provide the following information:
1. What are your kernel parameters relating to semaphores set to? Is anything else on the mahcine using significant numbers of semaphores?
2. Please provide the output of the following shell commands:
ls -ld /u01
ls -ld /u01/ttdata
ls -ld /u01/ttdata/datastores
ls -ld /u01/ttdata/logs
3. Please provide an excerpt of the detailed message log (ttmesg.log) between around 16:38 and 16:40 (i.e. from a little while before the problem until after the problem).
Thanks,
Chris

New DP on winsrv2012r2 - TS failing with error 0x80091007

Similar Messages

Maybe you are looking for