New Driver Creative Sound Blaster Live! 24-bit 1.04.0050 WHQL For Windows x64

This is the new Official Audio driver released by Creative for Sound Blaster Live! 24-bit for Windows x64.
You can not install this driver in your MSI nForce4 based boards without first applying the OnBoard Sound EEPROM fix first found here
You have to boot in win98 or winMe using a boot diskette in order to run the fix.
enjoy
Markoul

Quote from: Markoul on 22-May-05, 00:07:32
This is the new Official Audio driver released by Creative for Sound Blaster Live! 24-bit for Windows x64.
You can not install this driver in your MSI nForce4 based boards without first applying the OnBoard Sound EEPROM fix first found here
You have to boot in win98 or winMe using a boot diskette in order to run the fix.
enjoy
Markoul
Have you actually tired it yourself? I'm wondering if this is a workaround, or will this be the official solution. I wouldn't mind trying it, but I don't want to mess it up for when the Official driver is released.

Similar Messages

GDriver of Sound Blaster Live! 5.1 Digital (Model: SB0220) for Windows 7

My Sound Blaster Live! 5. Digital cannot work after Windows 7 is installed. Is driver for Windows 7 available? If not, any alternati'ves? My multimedia speaker is Boston "Digital BA735" which is used to work with the digaital output the this sound card under Windows XP.

Try kxproject site for driver

Installation CD for Creative Sound Blaster Live 24-bit External SB0490

Hi,
I've bought this old external soundcard without the original installation CD, because I thought I can download all needed software here on the creative site. But no, only the drivers and some simple program updates are available :-(. With the creative drivers installed, I only get hacked sound on the digital coax output, SPDIF is also not working correctly. I suppose I have to do some configuration in the creative suite software, but this suite can only be installed from the original installation CD...
Is here somebody who can tell me where I can download an ISO of this CD or perhaps make an upload of it?
Kind Regards
Steven

HRe: Sound Blaster Li've! 24-bit External (SB0490) choppy background sound? I've been having the same problem with mine. ?At first, all it would take is unplug the laptop end of the USB, wait a second, then plug it back in. ?A sound (incoming mail, reminder, general Windows sound) had to initiate the sound. ?It's almost like a CD skipping, but the sound played has no bearing on the popping sound. ?It's always the same pitch, timing, etc. no matter the sound that caused it.
I've blue screened a couple of times too over the past couple of weeks. ?I've only been able to catch 'USB' during the blue screen before it reboots, so I don't have a code number to chase down.
I'm using Windows Vista Premium Edition on a Gateway laptop that's about two years old. ?I'm being lazy, and not looking, but I'm pretty sure it's got a .6GHz DualCore proc, I upped the RAM to 2GB, I had to replace the HDD and I honestly don't recall the brand.
It's gotten to the point now that even unplugging and then replugging doesn't really affect it anymore. ?I know that I've updated the driver a couple of times. ?The first time Vista whined about it. ?Going to see if there's a more current version, but I don't really have any further help or suggestions.
Hopefully something will come up.

Sound Blaster Live! 5.1 model SB0100 drivers for Windows 7 64 bits

Hello!
I have a Sound Blaster Li've! 5. model SB000 with a Cambridge SoundWorks DTT3500. I haven't found any driver for my sound card that works with Windows 7 Ultimate 64 bits.
Is there any compatible driver for my sound card and for Windows 7 64 bits?
If it's not, which creative's sound cards are compatible with my Cambridge SoundWorks DTT3500?
Thank you!

I recently answered about the same question:
If you?use Vista or Windows7, then there is no official driver. You can only use alternati've drivers like Vista Support Pack by Daniel_K or the one from KXProject (better). But if you have more than 2 gigs of memory installed or an x64 OS, then both drivers will be half-working (as far as I remember, Daniel's driver won't work with more than 2 Gb of memory installed in any OS, and with KX-driver there will only be a problem with MIDI playback with more than 2 Gb AND x64 Win7).

Connection Logitech Z-680's to Creative Sound Blaster Live 24 Bit Exter

Trying to connect my Logitech Z-680?Speakers to connect to my Sound card. I can either use optical or the analog (3x 3.5mm jacks)
What is the best way to connect them?Also on the speakers depending on which cables i used, i have different effect options. If its using the analog :-6 channel directstereostereo x 2DD PL 2 MusicDD PL 2 Movie?If using optical:-StereoStereo x 2DD PL 2 MusicDD PL 2 Movie?Which should i use?for Music i will change the effect to DD PL 2 Music - so i get 5. sounds from my tracks. But which for movies?Are they're any changes that i have to make to the DVD program that i use?Also should i have CMSS on the soundblaster on or off?Thanks

I recommend using Optical (since its digital connection). (Also for to send to an external reci'ver to decode Dolby digital and DTS i beli've you need to use SPDIF (optical) out cause otherwise analog i beli've won't do it)?Those modes you?said?are up mixing modes for 2 channel sources like music?(best used with digital connections). Since movies are already 5. you don't need to use up mixing.
CMSS is for use on?analog?connections on the soundcard?only and is upmixing 2 channel?sources like music. Games i would recommend?analog since gaming can't do surround sound over digital. Depending on your DVD app wether it has SPDIF out is on the app. if its supports it should be fine.Message Edited by Stargazer on 02-24-20062:27 AM

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

First off your operating system version is obsolete and not being updated for security issues from Apple.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
So at least you need to upgrade to 10.6.8, and that will make your machine secure again.
However if you decide to upgrade further to 10.7 or 10.8, be forewarned your PPC based software of old is not going to work any longer. and your machine may require more RAM.
Check here to see and download the free MacTracker to see your machines true RAM potential and specs. There are videos online at YouTube, it's really easy to install yourself.
http://roaringapps.com/apps:table
I checked out the z-5500, apprantly the optical out shouldn't be a problem, however the surround sound decoding is a problem as the Mac doesn't do it, just passes it through for decoding on a receiver via the optical out port if your Mac has one.
Use the free MacTracker to find out or when you upgrade OS X, there is a option in the System Preferences > Sound.
https://logitech-en-ap.custhelp.com/app/answers/detail/a_id/9693/section/trouble shoot/crid/409/lt_product_id/224/tabs/1,3,2,4,5/cl/sg,en
The Sound Blaster Live 24 bit doesn't do Dolby 5.1 according to Wikipedia. More info on it is here.
http://support.creative.com/Products/ProductDetails.aspx?catID=1&prodID=10702&pr odName=Live!%2024-bit%20External&CatName=Sound+Blaster
If it's able to accept optical toslink cable from the Mac's toslink stereo mini port (if it has optical output) and then send that to the z-5500 via the analog speakers, then you should be fine.
I'm afraid you'll have to do some more digging to get it to work.
The only surround sound your going to get is by playing DVD movies that have it, then it can't have Dolby 5.1 as the Live 24 bit can't decode it.
So do your research on what surround sound formats the Live 24 can decode, then compare your DVD collection for those movies that have it, then get it all connected and enable it on the movie preferences at the menu.
Good Luck

CREATIVE SOUND BLASTER LIVE 5 voice dist

I have a CREATIVE SOUND BLASTER LIVE 5, I want to know if some?software of Creative labs?exists to distort the voice in real time.Pablo Castillo R.
http://pablocr.pe.kzMessage Edited by pcr_sof on 06-08-200709:48 PM
Message Edited by pcr_sof on 06-2-200708:36 PM

Take a look at the following thread:http://forums.creative.com/creativel...message.id=994?That is the best you can get. Did you run WindowsUpdate to get the drivers installed?If you did, just change the speaker setup to?4 speakers, then check and uncheck the?Digital Output Only checkbox to get sound back.

Sound Blaster Live 24-bit PCI Sound Card and Creative Sound Blaster PCI Card not detect

Ok here is my problem. I bought a Creative Sound Blaster PCI sound card a while back and it was working fine but recently when I would boot up my computer and try to play music say off of Winamp it says Bad DirectSound Driver. When I check device manager it shows no sound card there and in sounds and audio devices it says no audio device. Now my brother believed this to be a card fault so we went to Frys and bought a Sound Blaster Li've 24-bit PCI card. I uninstalled the old drivers and installed this new one but yet it's the same problem. My assumption was that Windows XP had something conflicting so I reinstalled the OS. It found the card and I installed the latest drivers?off of this site but now it does the same thing yet again with a fresh install of Windows XP. The card has been in all 3 of my PCI slots and it will detect it for a moment but then acts like as if the card was never installed. Like I never installed a sound card into the computer. The onboard audio has been disabled for a while now but I do not know what the problem could be. I did Scan for hardware changes but it doesn't show up. Sometimes when the card is detected if I do scan for hardware changes and the card is there it will just magically disappear from the device manager as if it was never there. Even when I try to load music and I see the card is detected it will not play the music and ends up locking up Winamp to the point that sometimes will go BSOD. Now I would really like to find out what the issue is because I am planning this weekend to swap out my motherboard with a duplicate board to see if that will end up fixing the problem but I want to find out if there is any other way to fix this issue. Thank you.Message Edited by AuXoIs on 02-25-200808:28 PM

Hmm what other options is there for the bios on PCI slots?Also anything you connect to the motherboard can have oxidization (I think its that) build up on the connection. Check the connector on the card and get a eraser (Pen eraser is better) and give it a good cleaning. The connector might have alot of build-up on it and you can see it by a dark yellowy colour. I cleaned my graphics card and ram connectors after they got alot of the build-up on them. On a older computer my graphics stopped working and this fixed it. Also I went away for a while (like a month) and came back to see that my puter didn't display anything. Opened it up and saw that the graphic card had alot of corrosion? on the card connector and in the slot. Does that if you computer is turned of for a long time. Had a heck of time trying to clean the slot out. One other thing that it could be is the sound card is faulty. I had an audigy 2 and it died a while back . It picks it up and then try and use it computer freezes and the after restart it's not there anymore. Hope it's not that problem. Hope this gives you something to go by.

Old Creative Sound Blaster Live Drivers Update

.Old Creative Sound Blaster Li've Drivers Update? Hey Guys,
In 998 or 999 I installed Sound Blaster Li've! MP3+ in my MicronPC Pnetium? using Windows ME. Subsequently I upgraded my computers to Windows XP professional in 2006. At that timCreative Labs still had some drivers update for this device.
I only used it for listening to muic occassionally, so there is nourgent need for me to upgrade the sound card. But recently I had a spyware scan and since then my sound card stopped wroking. I tried to follow the Microsoft suggestion:
Start
All programs
Accesories
Enertainment
Volume Control
Options
Adv. Controls
Advanced Options
Play Control
Check out the box Digital output only
But I ould not find "advanced options by following the above sequence. I tried to load AudioHQU, but it said that my driver AHQTBU.exe needs to be reloaded.
I tried various web sites and I could not find a site that has the downolads for supporting this old iece of hardware
?Your kind assistance is appreciated
Regards,
mikeylia

Driver,
http://support.creative.com/Products/ProductDetails.aspx?catID=&subCatID=206&prodID=573 &prodName=Sound%20Blaster%20Li've!%20MP3+%205.&sub CatName=Li've!&CatName=Sound+Blaster
link to ISO of original driver
disk if you need it,
http://files.filefront.com/SB+Audigy+Li'verar/;765938;/fileinfo.html

Creative Sound Blaster Live 5.1 Digital and Vi

Hi, I have Creative Sound Blaster Li've 5. Digital in my computer. I recently clean installed Windows Vista. Everything went fine, its been few months now everything was fine. But for the past few days my Vista computer is showing a blue screen on startup and will allow me to boot in Safe mode only with following error:
<p class="clsPTitle">Download updates for Creative Sound Blaster Li've 5. Digital
<p class="clsPTitle">?
This problem was caused by Creative Sound Blaster Li've 5. Digital,
which was created by Creative Technology Ltd.
Solution
To solve this problem, follow these steps:
Go online to the following website:
<img alt="[/img] src="http://wer.microsoft.com/Responses/include/images/arrow.gif">[color="#3a8e6">Creative Technology Ltd
<
Find SBL5DL_PCPatch_LB_3.exe, and then install it.
<
I downloaded above EXE file from creative web site and tried but it says File does not support Vista.
Can anyone please Help!!!
Idrees Adam

The front panel connections you want to use are adapted to be connected to a motherboard with audio included, NOT to a PCI audio card. You'll have to connect the front panel wires to your motherboard's audio connnector.
Greetings.
El At?n

Extra line outs on sound blaster Live 24 bit c

I have my headphones in line out but it is damaged and wont play both channels. How do i configure the other line outs to work and be a substitute headphone socket. I put the phones in them but no sound happens.

Hello. [url="http://support.creative.com/Products/ProductDetails.aspx?catID=&subCatID=206&prodID=035 &prodName=Li've!%2024-bit&subCatName=Li've!&CatName=Sound+Blaster">Look here.[/url]?Have a?nice day.

Cant re install sound blaster live 24 bit.HELP!!!!!!!

i install my card 2 days ago it worked fine for a while but the my recording levels were low could not record i went in to my comp set up enable the onboard card and that worked so i fugure it was an exe. problem so i uninstall now i wana re install and it says no sound blaster 24 bit detected i change the sound card slots that did not work i exange the card still the same thing im runing windows xp compaq presario s300nx 256 meg of ram. any sujestion? it will be highly apreciated ty

Taino,
You may need to cleansweep and then try to reinstall the card. There is a chance that there are still files remaining from the original install that are preventing the detection of the card. Here are instructions on how to cleansweep:
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jeremy

Sound Blaster Live 24.bit LD No sound from online TV or Ra

[color="#ff0000"]I had the new Sound Blaster Li've 24.bit installed in my computer, at first I had trouble getting sound out of my back two speakers but after the fourth day, I finally got that figured out. Now I am having problems with my tv and radio online. I am using winFM 5.3 and I can not get any sound though my speakers. I get sound from Windows Media Player or either CD/DVD player. I know it has to be something really simple but I have yet to find the problem. Can someone please help me.Message Edited by determinedone on 03-02-20060:2 AM

Does the software have any options in relation to audio, such as selecting the audio device you want to use?
If Windows Media Player and other applications work, then it's likely the card is working fine. Check another application if you can, such as WinAmp, to see if that works.
Cat

Creative sound blaster live va

<SPAN class=postbody>so i have a card installed on my pc. 4 speakers sub but when i play audio cds sound only came out of 2 speakers. i tried installing a newer version of the sound blaster softwares but was told to unistall the old ones. when i went through the process again i got an error message saying no audio devices could be found. now i have no sound at all. i tried to unistall / install the card, windows update, directx. i can install the old software again but when i try to get in the properties i get messages that direct sound cannot be launched. nothing seems to work.

First things first. Most CD's will only play left and right chanel depending on the program you are using to play audio CD's. If you can get your sound cards play control to open and show you the volume controls.
Usualy double clicking on the speaker down by the clock in the lower right corner.
If you see front and rear settings is the rear volume control at minimum or maximum?
Change it as needed if its there.
In the program you use to play the CD's look in its properties setting and see if there are any front and rear settings. Also do your speakers have a front and rear volume on them?
Be warned if you change some of these setting your games might be loud from the rear.
Hope this hel
ps.

Sound Blaster live 24-bit external hardward possible quick

i have a?Sound Blaster li've 24-bit external, it worked without any problems, accept slowing my computer down, but i only have 256 Ram and .4 GHZ CPU, so it wasn't a surprise. But then, the clips that hold the USB port in place came loose. They didn't break. They just came loose. The result being that?the port is back inside the card itself. Everything still looks just fine, but i can't get the?USB port to stay still so i can plug the cord into it. So I'm wondering if using a little glue,?or some kind of torch, might harm the device. Because I'm fairly certain the warranty is voided(cause it looks a little ruffed up), and i don't feel like paying shipping, repair, and all that, so i don't want to send it back, but there is a chance that it hasn't. Any advice is welcome. Oh and if any CL people are?reading this, the sound card was magical before the clips came loose, you guys rock!

that problem got fixed, but now there's another. every time i plug it into my computer, it says that 'there has been a power surge on USB hub' and then i have to reset the port and remove the cable. i tried looking on the database, anybody got any ideas?

New Driver Creative Sound Blaster Live! 24-bit 1.04.0050 WHQL For Windows x64

Similar Messages

Maybe you are looking for