New driver for Broadcom wireless cards

Finally there's a driver for Broadcom wireless cards, including 4328 which only worked using ndiswrapper.
http://www.broadcom.com/support/802.11/linux_sta.php
There are discussions about it on the Ubuntu forums
http://ubuntuforums.org/showthread.php?t=914697
on the Debian forums
http://forums.debian.net/viewtopic.php? … 294ad5d3e9
and on the Gentoo wiki
http://gentoo-wiki.com/HARDWARE_Apple_M … Generation
Last edited by cmlr (2008-09-25 14:10:13)

Actually, this driver already has a Wiki page, http://wiki.archlinux.org/index.php/Broadcom_BCM4312. The new information is that it doesn't just work with bcm4312 cards, but all modern 43xx cards. See the forum links in the previous message.
The driver is already available in AUR,
http://aur.archlinux.org/packages.php?ID=19514
Last edited by cmlr (2008-09-25 14:20:50)

Similar Messages

Need new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

Any one know where i can get the new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

http://www.nvidia.com/object/7seriestechspecs.html
Pls visit above nVIDIA web page.
based on NVIDIA web pages, 7900GTX supports MAC OS X.
but .....seems not so far.

Re: Satellite A210-16F: Where to get newer driver for graphic card??

Hi!
I have a Satellite A210-16F laptop with a Ati Mobility Radeon HD 2600 graphic card...
After checking my device manager i found out that my graphic drivers are from 2007 which can't be good :S but for the life of me i can't find the right drivers anywhere... if you check out the screenshot, you will see that the drivers are from 2007 and after i click on "update driver" and then "search automatically for updated driver software" it never finds anything and tells me that my drivers are up-to-date :SS Any help would be greatly appreciated!!!
Oh, also, my OS is Vista Home Premium (32-bit)
Thank you!
http://img269.imageshack.us/img269/3407/61265269.jpg

One solution for your problem is, that if you upgraded your OS to Windows 7, there's a new driver for Mobility Radeon 2000 Series (Catalyst 9.6) on the ATI/AMD driver page(that one with the OS selector etc..). It's states however, that these drivers are for 7's beta releases only, but if you install them even on regular Win7 system, they're working fine and after a while an update for them appears in Windows update(It should update to Catalyst 9.7). I run them almost a week without a problem and it even resolved my Mass Effect 2 crashing issue.
One problem remains though that the driver is only for Win7(when you select Vista, it's really annoying: "Please contact your device driver manufacturer..." for you.).
It's truly more annoying than sad, that Toshiba, although in the Win7 supported laptop models list states that P200/A200 series are supported, the only thing supported after all seems to be a bluetooth module(since only that one got a new driver). So far there was no problem with an old display driver for 2600, but recently the new Mass Effect 2 crashes almost randomly during loading stages(with error log in computer management stating that the faulting module is ATI(anything here), and I only expect more such errors/problems with new games to come, because almost 2 years old drivers! So I think guys in Toshiba software engineering should really wake up.

No network and Broadcom wireless card

I'm new to Solaris OS, and I installed Solaris 10 with no network since I'm using a broadcom wireless card. Before installing Solaris10 on this box I had Ubuntu running on it and was able to use the ndiswrapper for the broadcom card.
But... I'm a bit lost now since I installed solaris 10 with no network at all. So my question is, how do I create a new network and get my broadcom card installed?

Solaris is a great OS... welcome to the fold.
First, Broadcom is not a good choice for any alternative OS including Solaris but OpenSolaris does have drivers despite Broadcom's lack of cooperation with other operating systems. I do suggest staying away from this vendor because of their "closed" nature of driver support.
That being said, the HCL at http://www.sun.com/bigadmin/hcl/ can help. As well as Linux and others. While vendors like Broadcom are closed, others are not.
My favorite has been Intel 82557, 82558, 82559-controllers, I bought a bunch of them dirt cheap years back knowing they were supported with Linux, BSD and Solaris. They work well in pairs too, use then for firewalls.
The best thing we can do is only buy hardware that works with all OSes.

Tried every way to install my broadcom wireless card and failed

Hello.. i asked this in the newbie section but didn't get any replies.. i really need help and i don't know where else to go.
i have an hp dv2500 laptop with a Broadcom wireless card.. here is the output of lspci | grep -i net
08:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03)
at first, i tried getting it to work with the broadcom-wl driver from AUR as suggested by this wiki page: http://wiki.archlinux.org/index.php/Broadcom_BCM4312
i followed all the steps.. however, i did get an error when i tried to exucute this line:
insmod /lib/modules/2.6.30-ARCH/kernel/drivers/net/wireless/wl.ko
and the error was:
error inserting 'wl.ko': -1 File exists ...
i continued despite this error and when i was done, i couldn't detect the card with iwconfig or wicd.. the modules named "wl" and "lib80211" are loaded but i still can't detect it..
i uninstalled, re-installed and i got the same behaviour..
so then i tried the BCM43xx driver as described here: http://wiki.archlinux.org/index.php/Wir … up#BCM43XX
i unpacked the firmware and restarted but i still couldn't detect it.. and i couldn't load the bcm43xx module because arch says was not found..
then i tried the driver after that "b43".. followed the steps on the wiki, restarted, and i still couldn't detect the card with iwconfig or wicd..
i have been trying to get this to work for 3 days now.. i appreciate your time and help in this issue..
thanks

thanks for the reply tomk..
so at least we limited the problem to using broadcom-wl..
here is dmesg after modprobe -r wl
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
Adding 1895660k swap on /dev/sda4. Priority:-1 extents:1 across:1895660k
forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X
Clocksource tsc unstable (delta = 4398045793691 ns)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
lib80211_crypt: unregistered algorithm 'NULL'
and after modprobe wl:
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
i'm not that good with gnu/linux, so i'm not sure if something is wrong from these messages... do they point to anything?

[SOLVED]Driver of Broadcom wireless-bcm43142

Hi
First I am so sorry to open a new topic while there is one in https://bbs.archlinux.org/viewtopic.php … 5#p1308505. but due to the link is solved and its solutions could not solve my problem I had to open a new one.
My problem is with my wireless device. Its driver is Broadcom wireless-bcm43142 I do not know why I cannot see my interface. The ip link gives me:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 20:1a:06:9c:67:19 brd ff:ff:ff:ff:ff:ff
And the iwconfig gives me:
enp3s0 no wireless extensions.
lo no wireless extensions.
As you can see there is no wireless interface and wifi-menu (as root) gives:
Invalid interface specification
I have found no way to solve my problem.
Is there any one can help me?
Last edited by qaderzade (2014-12-18 10:03:35)

aurabindo
dmesg did not give me that " a lot of errors telling "Unknown symbols"", and you see its output in bellow.
I recreated the ramdisk and reboot but still no difference.
dmesg output is (a little long):
# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.6-1-ARCH (builduser@foutrelis) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9cd33087-f581-4583-a7ce-7d50d414eea6 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096aaffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000096ab0000-0x0000000097eaffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000097eb0000-0x000000009cabefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009cabf000-0x000000009cebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001df5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20238/INVALID, BIOS 79CN46WW(V3.05) 12/23/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1df600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 009D000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00FF800000 mask 7FFF800000 write-protect
[ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 6 base 01DF600000 mask 7FFFE00000 uncachable
[ 0.000000] 7 base 01DF800000 mask 7FFF800000 uncachable
[ 0.000000] 8 base 01E0000000 mask 7FE0000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2b000, 0x01b2bfff] PGTABLE
[ 0.000000] BRK [0x01b2c000, 0x01b2cfff] PGTABLE
[ 0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1df400000-0x1df5fffff]
[ 0.000000] [mem 0x1df400000-0x1df5fffff] page 2M
[ 0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1dc000000-0x1df3fffff]
[ 0.000000] [mem 0x1dc000000-0x1df3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x1dbffffff]
[ 0.000000] [mem 0x180000000-0x1bfffffff] page 1G
[ 0.000000] [mem 0x1c0000000-0x1dbffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x96aaffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x969fffff] page 2M
[ 0.000000] [mem 0x96a00000-0x96aaffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x97eb0000-0x9cabefff]
[ 0.000000] [mem 0x97eb0000-0x97ffffff] page 4k
[ 0.000000] [mem 0x98000000-0x9c9fffff] page 2M
[ 0.000000] [mem 0x9ca00000-0x9cabefff] page 4k
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] [mem 0x9cfff000-0x9cffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37950000-0x37c9ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000A4 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000009CFF7000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x000000009CFE9000 00AE0E (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000009CFBA000 000040
[ 0.000000] ACPI: SLIC 0x000000009CFFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000009CFFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x000000009CFFA000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x000000009CFF8000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x000000009CFF6000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x000000009CFF5000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x000000009CFF4000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFE6000 002028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x000000009CFE4000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x000000009CFE3000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x000000009CFE1000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x000000009CFE0000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFDF000 000539 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFDE000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFDA000 00348C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001df5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1df5fffff]
[ 0.000000] NODE_DATA [mem 0x1df5f9000-0x1df5fcfff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff8801d8c00000-ffff8801debfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1df5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x96aaffff]
[ 0.000000] node 0: [mem 0x97eb0000-0x9cabefff]
[ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] node 0: [mem 0x100000000-0x1df5fffff]
[ 0.000000] On node 0 totalpages: 1551452
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9883 pages used for memmap
[ 0.000000] DMA32 zone: 632512 pages, LIFO batch:31
[ 0.000000] Normal zone: 14296 pages used for memmap
[ 0.000000] Normal zone: 914944 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x96ab0000-0x97eaffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cabf000-0x9cebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801df200000 s82752 r8192 d23744 u262144
[ 0.000000] pcpu-alloc: s82752 r8192 d23744 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1527188
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9cd33087-f581-4583-a7ce-7d50d414eea6 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6025340K/6205808K available (5386K kernel code, 897K rwdata, 1712K rodata, 1136K init, 1176K bss, 180468K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.400 MHz processor
[ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.33 BogoMIPS (lpj=7981333)
[ 0.000031] pid_max: default: 32768 minimum: 301
[ 0.000037] ACPI: Core revision 20140724
[ 0.010737] ACPI: All ACPI Tables successfully acquired
[ 0.015141] Security Framework initialized
[ 0.015146] Yama: becoming mindful.
[ 0.015604] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.017037] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.017660] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.017670] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.017854] Initializing cgroup subsys memory
[ 0.017859] Initializing cgroup subsys devices
[ 0.017860] Initializing cgroup subsys freezer
[ 0.017862] Initializing cgroup subsys net_cls
[ 0.017864] Initializing cgroup subsys blkio
[ 0.017883] CPU: Physical Processor ID: 0
[ 0.017884] CPU: Processor Core ID: 0
[ 0.017888] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.018805] mce: CPU supports 9 MCE banks
[ 0.018821] CPU0: Thermal monitoring enabled (TM1)
[ 0.018833] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.018930] Freeing SMP alternatives memory: 20K (ffffffff819fe000 - ffffffff81a03000)
[ 0.019643] ftrace: allocating 20687 entries in 81 pages
[ 0.027980] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061010] smpboot: CPU0: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03)
[ 0.061020] TSC deadline timer enabled
[ 0.061041] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.061059] ... version: 3
[ 0.061060] ... bit width: 48
[ 0.061061] ... generic registers: 4
[ 0.061062] ... value mask: 0000ffffffffffff
[ 0.061063] ... max period: 0000ffffffffffff
[ 0.061064] ... fixed-purpose events: 3
[ 0.061064] ... event mask: 000000070000000f
[ 0.084495] x86: Booting SMP configuration:
[ 0.084497] .... node #0, CPUs: #1
[ 0.098756] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.105430] #2 #3 #4 #5 #6 #7
[ 0.220589] x86: Booted up 1 node, 8 CPUs
[ 0.220592] smpboot: Total of 8 processors activated (38325.66 BogoMIPS)
[ 0.228167] devtmpfs: initialized
[ 0.230940] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[ 0.231682] pinctrl core: initialized pinctrl subsystem
[ 0.231717] RTC time: 6:10:48, date: 12/19/14
[ 0.231793] NET: Registered protocol family 16
[ 0.231888] cpuidle: using governor ladder
[ 0.231890] cpuidle: using governor menu
[ 0.231915] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.231917] ACPI: bus type PCI registered
[ 0.231918] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.231992] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.231994] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.232265] PCI: Using configuration type 1 for base access
[ 0.232504] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.232505] mtrr: probably your BIOS does not setup all CPUs.
[ 0.232505] mtrr: corrected configuration.
[ 0.244996] ACPI: Added _OSI(Module Device)
[ 0.244998] ACPI: Added _OSI(Processor Device)
[ 0.244999] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.245000] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.268870] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.269663] ACPI: Dynamic OEM Table Load:
[ 0.269671] ACPI: SSDT 0xFFFF8801D5E0F400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120518)
[ 0.281610] ACPI: Dynamic OEM Table Load:
[ 0.281617] ACPI: SSDT 0xFFFF8801D5EC8800 0005AA (v01 PmRef ApIst 00003000 INTL 20120518)
[ 0.294842] ACPI: Dynamic OEM Table Load:
[ 0.294848] ACPI: SSDT 0xFFFF8801D5EA9C00 000119 (v01 PmRef ApCst 00003000 INTL 20120518)
[ 0.310590] ACPI: Interpreter enabled
[ 0.310598] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.310604] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.310620] ACPI: (supports S0 S3 S4 S5)
[ 0.310621] ACPI: Using IOAPIC for interrupt routing
[ 0.310644] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.409679] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.409684] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.409798] \_SB_.PCI0:_OSC invalid UUID
[ 0.409799] _OSC request data:1 1f 0
[ 0.409802] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.410449] PCI host bridge to bus 0000:00
[ 0.410452] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.410454] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.410455] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.410456] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.410458] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.410465] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.410598] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.410609] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
[ 0.410615] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.410619] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.410737] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.410744] pci 0000:00:03.0: reg 0x10: [mem 0xb0610000-0xb0613fff 64bit]
[ 0.410894] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.410913] pci 0000:00:14.0: reg 0x10: [mem 0xb0600000-0xb060ffff 64bit]
[ 0.410970] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.411052] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.411091] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.411109] pci 0000:00:16.0: reg 0x10: [mem 0xb0618000-0xb061800f 64bit]
[ 0.411169] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.411294] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.411315] pci 0000:00:1a.0: reg 0x10: [mem 0xb061d000-0xb061d3ff]
[ 0.411399] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.411502] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.411543] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.411558] pci 0000:00:1b.0: reg 0x10: [mem 0xb0614000-0xb0617fff 64bit]
[ 0.411629] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.411714] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.411750] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.411823] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.411908] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.411944] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.412015] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.412100] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.412136] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.412206] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.412333] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.412353] pci 0000:00:1d.0: reg 0x10: [mem 0xb061c000-0xb061c3ff]
[ 0.412437] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.412538] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.412578] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[ 0.412784] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.412801] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.412808] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.412816] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.412823] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.412830] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.412838] pci 0000:00:1f.2: reg 0x24: [mem 0xb061b000-0xb061b7ff]
[ 0.412874] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.412986] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.413001] pci 0000:00:1f.3: reg 0x10: [mem 0xb0619000-0xb06190ff 64bit]
[ 0.413020] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.413202] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.413306] pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
[ 0.413333] pci 0000:02:00.0: reg 0x10: [mem 0xb0500000-0xb0507fff 64bit]
[ 0.413472] pci 0000:02:00.0: supports D1 D2
[ 0.413474] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.413504] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.418325] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.418331] pci 0000:00:1c.1: bridge window [mem 0xb0500000-0xb05fffff]
[ 0.418484] pci 0000:03:00.0: [1969:10a0] type 00 class 0x020000
[ 0.418566] pci 0000:03:00.0: reg 0x10: [mem 0xb0400000-0xb043ffff 64bit]
[ 0.418597] pci 0000:03:00.0: reg 0x18: [io 0x3000-0x307f]
[ 0.418873] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.418982] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.425034] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.425038] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.425042] pci 0000:00:1c.2: bridge window [mem 0xb0400000-0xb04fffff]
[ 0.472074] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.472128] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.472179] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.472232] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.472279] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.472325] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.472377] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.472428] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.472540] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.472570] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.472656] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.472657] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.472660] vgaarb: loaded
[ 0.472661] vgaarb: bridge control possible 0000:00:02.0
[ 0.472693] PCI: Using ACPI for IRQ routing
[ 0.478193] PCI: pci_cache_line_size set to 64 bytes
[ 0.478318] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.478320] e820: reserve RAM buffer [mem 0x96ab0000-0x97ffffff]
[ 0.478321] e820: reserve RAM buffer [mem 0x9cabf000-0x9fffffff]
[ 0.478322] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.478323] e820: reserve RAM buffer [mem 0x1df600000-0x1dfffffff]
[ 0.478404] NetLabel: Initializing
[ 0.478405] NetLabel: domain hash size = 128
[ 0.478406] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.478416] NetLabel: unlabeled traffic allowed by default
[ 0.478437] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.478442] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.480472] Switched to clocksource hpet
[ 0.484636] pnp: PnP ACPI init
[ 0.484735] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.484737] system 00:00: [io 0xffff] has been reserved
[ 0.484738] system 00:00: [io 0xffff] has been reserved
[ 0.484740] system 00:00: [io 0xffff] has been reserved
[ 0.484741] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.484743] system 00:00: [io 0xfd60-0xfd63] has been reserved
[ 0.484744] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.484747] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.484790] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.484792] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.484819] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.484855] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.484857] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.484903] pnp 00:04: Plug and Play ACPI device, IDs SYN2b15 SYN0700 SYN0002 PNP0f13 (active)
[ 0.484975] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.530665] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.530667] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.530668] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.530669] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.530671] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.530673] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.530674] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.530675] system 00:06: [mem 0xff000000-0xff000fff] has been reserved
[ 0.530677] system 00:06: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.530679] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.530680] system 00:06: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 0.530682] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 0.530684] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.531112] pnp: PnP ACPI: found 7 devices
[ 0.537673] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.537676] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.537677] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.537698] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.537700] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.537701] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.537706] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff]
[ 0.537709] pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.537711] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.537713] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.537722] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.537727] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fcfffff]
[ 0.537731] pci 0000:00:1c.0: bridge window [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.537737] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.537742] pci 0000:00:1c.1: bridge window [mem 0xb0500000-0xb05fffff]
[ 0.537750] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.537752] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.537757] pci 0000:00:1c.2: bridge window [mem 0xb0400000-0xb04fffff]
[ 0.537765] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.537767] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.537768] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.537769] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 0.537771] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.537772] pci_bus 0000:01: resource 1 [mem 0x9fb00000-0x9fcfffff]
[ 0.537774] pci_bus 0000:01: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.537775] pci_bus 0000:02: resource 1 [mem 0xb0500000-0xb05fffff]
[ 0.537776] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.537778] pci_bus 0000:03: resource 1 [mem 0xb0400000-0xb04fffff]
[ 0.537797] NET: Registered protocol family 2
[ 0.537974] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.538094] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.538215] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.538230] TCP: reno registered
[ 0.538239] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.538263] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.538312] NET: Registered protocol family 1
[ 0.538325] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.871621] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.206035] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.206238] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[ 3.206279] PCI: CLS 64 bytes, default 64
[ 3.206318] Unpacking initramfs...
[ 3.259001] Freeing initrd memory: 3392K (ffff880037950000 - ffff880037ca0000)
[ 3.259009] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.259011] software IO TLB [mem 0x98abf000-0x9cabf000] (64MB) mapped at [ffff880098abf000-ffff88009cabefff]
[ 3.259047] Simple Boot Flag at 0x44 set to 0x1
[ 3.259313] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 3.259357] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x12
[ 3.259367] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x12
[ 3.259377] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x12
[ 3.259404] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x12
[ 3.259411] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x12
[ 3.259418] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x12
[ 3.259425] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x12
[ 3.259432] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x12
[ 3.259482] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 3.259503] Scanning for low memory corruption every 60 seconds
[ 3.259747] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 3.259765] Initialise system trusted keyring
[ 3.260051] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.261119] zpool: loaded
[ 3.261122] zbud: loaded
[ 3.261274] VFS: Disk quotas dquot_6.5.2
[ 3.261303] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.261403] msgmni has been set to 11774
[ 3.261449] Key type big_key registered
[ 3.261592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 3.261641] io scheduler noop registered
[ 3.261643] io scheduler deadline registered
[ 3.261665] io scheduler cfq registered (default)
[ 3.262062] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.262075] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.262100] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 3.262101] vesafb: scrolling: redraw
[ 3.262102] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.262115] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90010e80000, using 4160k, total 4160k
[ 3.349877] Console: switching to colour frame buffer device 170x48
[ 3.437348] fb0: VESA VGA frame buffer device
[ 3.437362] intel_idle: MWAIT substates: 0x42120
[ 3.437363] intel_idle: v0.4 model 0x3C
[ 3.437364] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.437671] GHES: HEST is not enabled!
[ 3.437734] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.438127] Linux agpgart interface v0.103
[ 3.438182] rtc_cmos 00:02: RTC can wake from S4
[ 3.438300] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.438332] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 3.438342] Intel P-state driver initializing.
[ 3.438532] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.438774] TCP: cubic registered
[ 3.438992] NET: Registered protocol family 10
[ 3.439502] NET: Registered protocol family 17
[ 3.440322] Loading compiled-in X.509 certificates
[ 3.440352] registered taskstats version 1
[ 3.441426] Magic number: 10:714:165
[ 3.441569] rtc_cmos 00:02: setting system clock to 2014-12-19 06:10:51 UTC (1418969451)
[ 3.441729] PM: Hibernation image not present or could not be loaded.
[ 3.443627] Freeing unused kernel memory: 1136K (ffffffff818e2000 - ffffffff819fe000)
[ 3.443631] Write protecting the kernel read-only data: 8192k
[ 3.448299] Freeing unused kernel memory: 748K (ffff880001545000 - ffff880001600000)
[ 3.450157] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[ 3.463162] random: systemd-tmpfile urandom read with 4 bits of entropy available
[ 3.480365] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
[ 3.520316] ACPI: bus type USB registered
[ 3.520334] usbcore: registered new interface driver usbfs
[ 3.520343] usbcore: registered new interface driver hub
[ 3.520396] SCSI subsystem initialized
[ 3.520412] usbcore: registered new device driver usb
[ 3.527223] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.527258] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.527774] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.529927] ehci-pci: EHCI PCI platform driver
[ 3.530065] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.530072] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.530086] ehci-pci 0000:00:1a.0: debug port 2
[ 3.530898] libata version 3.00 loaded.
[ 3.534001] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 3.534014] ehci-pci 0000:00:1a.0: irq 21, io mem 0xb061d000
[ 3.542963] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.543106] hub 1-0:1.0: USB hub found
[ 3.543110] hub 1-0:1.0: 2 ports detected
[ 3.543320] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.543324] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.543339] ehci-pci 0000:00:1d.0: debug port 2
[ 3.547225] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 3.547235] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb061c000
[ 3.556309] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.556437] hub 2-0:1.0: USB hub found
[ 3.556441] hub 2-0:1.0: 2 ports detected
[ 3.556672] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.556678] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 3.556769] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.556791] xhci_hcd 0000:00:14.0: irq 24 for MSI/MSI-X
[ 3.557006] hub 3-0:1.0: USB hub found
[ 3.557025] hub 3-0:1.0: 14 ports detected
[ 3.560152] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.560155] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 3.560285] hub 4-0:1.0: USB hub found
[ 3.560294] hub 4-0:1.0: 4 ports detected
[ 3.560999] ahci 0000:00:1f.2: version 3.0
[ 3.561114] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X
[ 3.561137] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 3.561157] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x30 impl SATA mode
[ 3.561159] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems apst
[ 3.566914] scsi host0: ahci
[ 3.567156] scsi host1: ahci
[ 3.567347] scsi host2: ahci
[ 3.567467] scsi host3: ahci
[ 3.567569] scsi host4: ahci
[ 3.567677] scsi host5: ahci
[ 3.567709] ata1: DUMMY
[ 3.567710] ata2: DUMMY
[ 3.567711] ata3: DUMMY
[ 3.567712] ata4: DUMMY
[ 3.567719] ata5: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b300 irq 25
[ 3.567722] ata6: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b380 irq 25
[ 3.573511] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.849898] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.886651] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.887407] ata5.00: ATA-9: WDC WD10JPCX-24UE4T0, 01.01A01, max UDMA/133
[ 3.887410] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.888216] ata5.00: configured for UDMA/133
[ 3.888387] scsi 4:0:0:0: Direct-Access ATA WDC WD10JPCX-24U 1A01 PQ: 0 ANSI: 5
[ 3.973973] hub 1-1:1.0: USB hub found
[ 3.974050] hub 1-1:1.0: 6 ports detected
[ 4.080133] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.204158] hub 2-1:1.0: USB hub found
[ 4.204235] hub 2-1:1.0: 8 ports detected
[ 4.206857] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.211266] ata6.00: ATAPI: PLDS DVD-RW DS8A9SH, EL3A, max UDMA/100
[ 4.212138] ata6.00: configured for UDMA/100
[ 4.219154] scsi 5:0:0:0: CD-ROM PLDS DVD-RW DS8A9SH EL3A PQ: 0 ANSI: 5
[ 4.236511] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.236515] sd 4:0:0:0: [sda] 4096-byte physical blocks
[ 4.236531] sd 4:0:0:0: [sda] Write Protect is off
[ 4.236533] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.236547] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.251972] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.251975] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.252099] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 4.260280] tsc: Refined TSC clocksource calibration: 2394.455 MHz
[ 4.363728] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[ 4.484466] sda: sda1 sda2 sda3 sda4
[ 4.485024] sd 4:0:0:0: [sda] Attached SCSI disk
[ 4.747370] usb 3-7: new full-speed USB device number 3 using xhci_hcd
[ 4.931858] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.080974] usb 3-8: new high-speed USB device number 4 using xhci_hcd
[ 5.261176] Switched to clocksource tsc
[ 5.542435] random: nonblocking pool is initialized
[ 6.737889] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 7.374747] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 8.402584] systemd-journald[180]: Received request to flush runtime journal from PID 1
[ 9.159616] mei_me 0000:00:16.0: irq 26 for MSI/MSI-X
[ 9.162354] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
[ 9.162358] ACPI: Power Button [PWRB]
[ 9.162422] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 9.162455] ACPI: Lid Switch [LID0]
[ 9.162497] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 9.162500] ACPI: Power Button [PWRF]
[ 9.202130] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 9.242990] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.280404] EDAC MC: Ver: 3.0.0
[ 9.285113] thermal LNXTHERM:00: registered as thermal_zone0
[ 9.285116] ACPI: Thermal Zone [TZ00] (45 C)
[ 9.338052] EDAC ie31200: No ECC support
[ 9.364458] ACPI: Battery Slot [BAT1] (battery present)
[ 9.364565] ACPI: AC Adapter [ACAD] (off-line)
[ 9.437541] AVX2 version of gcm_enc/dec engaged.
[ 9.452250] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6
[ 9.480172] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:1a:06:9c:67:19]
[ 9.505148] snd_hda_intel 0000:00:1b.0: irq 27 for MSI/MSI-X
[ 9.611542] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405f conflicts with OpRegion 0x0000000000004040-0x000000000000404f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
[ 9.611546] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.624543] sound hdaudioC1D0: CX20757: BIOS auto-probing.
[ 9.624780] sound hdaudioC1D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 9.624782] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.624783] sound hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 9.624784] sound hdaudioC1D0: mono: mono_out=0x0
[ 9.624785] sound hdaudioC1D0: inputs:
[ 9.624786] sound hdaudioC1D0: Internal Mic=0x1a
[ 9.624788] sound hdaudioC1D0: Mic=0x19
[ 9.625578] sound hdaudioC1D0: Enable sync_write for stable communication
[ 9.628176] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input8
[ 9.628318] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 9.628364] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 9.632142] iTCO_vendor_support: vendor-support=0
[ 9.654572] usbcore: registered new interface driver rtsx_usb
[ 9.717317] media: Linux media interface: v0.10
[ 9.733028] alx 0000:03:00.0 enp3s0: renamed from eth0
[ 9.762463] Linux video capture interface: v2.00
[ 9.762505] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.762530] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 9.762613] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.766150] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (174f:114f)
[ 9.772028] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input11
[ 9.772070] usbcore: registered new interface driver uvcvideo
[ 9.772071] USB Video Class driver (1.1.1)
[ 10.188776] kvm: disabled by bios
[ 10.212338] kvm: disabled by bios
[ 10.214858] [drm] Initialized drm 1.1.0 20060810
[ 10.300482] intel_rapl: Found RAPL domain package
[ 10.300487] intel_rapl: Found RAPL domain core
[ 10.300489] intel_rapl: Found RAPL domain uncore
[ 10.300491] intel_rapl: Found RAPL domain dram
[ 10.572444] [drm] Memory usable by graphics device = 2048M
[ 10.572448] checking generic (a0000000 410000) vs hw (a0000000 10000000)
[ 10.572449] fb: switching to inteldrmfb from VESA VGA
[ 10.572462] Console: switching to colour dummy device 80x25
[ 10.572521] [drm] Replacing VGA console driver
[ 10.592061] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 10.592079] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.592080] [drm] Driver supports precise vblank timestamp query.
[ 10.592104] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 10.627892] [drm] VBT doesn't support DRRS
[ 10.775953] Adding 6291452k swap on /dev/sda3. Priority:-1 extents:1 across:6291452k FS
[ 10.840003] fbcon: inteldrmfb (fb0) is primary device
[ 11.012282] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[ 11.396384] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1695, fw id: 739436
[ 11.526095] Console: switching to colour frame buffer device 170x48
[ 11.528923] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 11.528924] i915 0000:00:02.0: registered panic notifier
[ 11.530503] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 11.544314] mousedev: PS/2 mouse device common for all mice
[ 11.573903] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.573964] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 11.574020] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[ 11.579445] snd_hda_intel 0000:00:03.0: irq 29 for MSI/MSI-X
[ 11.609895] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 11.609965] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 11.610026] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 49.117466] alx 0000:03:00.0: irq 30 for MSI/MSI-X
[ 49.117775] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 49.118703] alx 0000:03:00.0 enp3s0: NIC Up: 100 Mbps Full
[ 49.119271] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 60.675960] fuse init (API version 7.23)
[ 300.529167] mce: [Hardware Error]: Machine check events logged

Unable to find driver for realtek sound card

hi iam having HP Pavilion Media Center a1320in Desktop PC.. iam unable to install driver for my sound card.i got driver from hp website but while installing a msg gets popup. it says install Microsoft uaa bus driver for hd audio. even in device manager-system devices i cant find MS UAA hd audio. 1 unknown device its shows in device manager. bcoz of that i purshased a new sound card. help me pls.... os - windows xp pro sp3.

hi paul . i just installed the above two softs. but nothing happend. kb888111 is for xp sp2. so it will not get installed in sp3. bt i made small changes in registry and installed it. even i installed 2nd soft realted audio also, u can find my comp specification over here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00590356&tmp_task=prodinfoCategory&lc=en&dlc=en...〈=en&product=1823355 iam using xp sp3. in my device manager-system devices- i cant find microsoft UAA....... and i think thats the problem. every time i install driver for realtek audio(got from hp website), it ask me to install MS UAA bus driver. what to do now..

Cant find the Driver for my Wireless on my Laptop

Hi Everyone,
So I have been trying to fix my Laptop for some time now. I use to have windows Vista on this Laptop then upgraded to Windows 7. Now everything is perfect but for some reason I cannot find the correct Driver for my Wireless on this laptop. I have tried searching and searching for countless hours and even went on the website and let it detect the system and suggest me the drivers but it doesnt seem to pick up my Windows 7. I have tried the Vista before and it did not work as well. So I am really hoping someone on this forum could help me out. You would make my life sooooo much easier : )
So When I check out the Network IDs under Properties this is what is Listed.
PCI\VEN_10DE&DEV_0269&SUBSYS_30B7103C&REV_A3
PCI\VEN_10DE&DEV_0269&SUBSYS_30B7103C
PCI\VEN_10DE&DEV_0269&CC_068000
PCI\VEN_10DE&DEV_0269&CC_0680
Please Let me know if you can help me in any way. Thank you everyone for your time
Shawn D Blair
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Hi:
Install the above driver and that will install both the ethernet driver and co-processor driver.
You have a problem with the wireless card...could be minor, could be major.
The wireless card is missing from the device manager.
Install this software, reboot, and see if you can turn on the wireless card by using this software.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3357379&swItemId=ob_76368_1&swEnvOid=4052
If that doesn't get the Network Controller device to show up so that you can post the hardware ID for it, then the motherboard is shot. Power to the slot that the wireless card is connected to has been cut.
Very common problem with the Nvidia chipset motherboards with the amd processors.

New Driver for Audigy 2 NX - No 44.1Khz output ?

I installed the latest driver(.0.0099 - 26-Feb-0) for my Audigy 2 NX soundcard running on Windows 7. This the first time I am using the NX on Windows 7.
Everything is working fine, except I notice that in the "Output Rate" dropdown selection (that appears in the Windows "Advanced" tab under Properties of the playback device) there is no option for 6bit 44.Khz. The lowest is 48Khz. So does this mean a 44.Khz signal will always get resampled to 48Khz ? This is for the *analog* output only, not digital(spdif).

Re: New Driver for Audigy 2 NX - No 44.Khz output ?Hi dudl
My name is Felippe from Brazil. I bought an use Audigy 2 NX, that didn?t come with the Instalation and Applications CD. So I started looking for the drivers and applications to install. I installed the beta driver. I managed to install the sound card with it. The problem is the applications. Some of them I did the download (wave studio, creative mediaplayer), but the EAX CONSOLE I couldn?t install. So I tryed to install the Support Pack 3.8 that you published, with no success. The error code is "-6003". As I do not know much about computers, I ask you to help me. I work with music, voice recording, and EAX CONSOLE is really useful, since I do not know any program to replace. Well, I wait your response as soon as possible. Thank you. Felippe
PS: Sorry about my english, ok?!
PS2: You can answer trought the following email: [url="mailto:[email protected]">felippef [email protected][/url]

HT3986 Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

uhm hey guys,
idk where else to get help so ima try here,
i got windows 8 installed with bootcamp on my macbook pro late 2010 (5, 5) and theres no sound coming out of it, so i installed an nvidia audio driver (idk, it could be the incorrect one) but i have nvidia GeForce 320 on my macbook.
do you know what i should install ?
but when i go onto my osx the sound is fine, so i figured im missing something on windows 8
Orrrr could i just go out and get parallels and hope it doesn't get the same problems?

HT1338 Why doesn't "Software Update" show me the new driver for the Epson 50C20D (Artisan 800) while It is on the list of available new driver?

Since I upgraded to mountain lion, my Artisan printer stopped working. After talking to Epson and trying all kind of things, it was determined its definitely a driver problem. The PC ping the printer well but won;t print to it as it think its not connected (when it is as priven by the ping).
The new driver for Epson 50C20D are on the list of update available drivers on the OS X wen site yet trigering "Software Update" does does detect I need it... Why is that? Thanks

Thanks Mende1. The printer is there and installed allright. Even shows as "idle" until I try to print to it. The driver version shows 6.36 and I ned to update to 9 which is only avail from the App store... However, the app store don't detect I need it..

Where to buy new drives for Xserve RAID

I have been looking all over to buy NEW drives for my RAID. Can anyone direct me where to go to buy new drives with the slot attachment? 500GB or 750GB
Forgive my lack of specific/correct terminology - I am a newbie when it comes to the RAID.
Thanks in advance!
Brian

I think the fine print says DVD Player support requires 10.3 or higher. But you can still play DVDs in the original drive you have, and are looking to add a drive in the empty bay, right?
Also, Patchburn is available for 10.2 to add native burning support, or you can maybe find an old version of Toast (5 ?) for 10.2 that should allow you to burn to the drive.
http://patchburn.de/download.html
I agree with the suggestion to upgrade to 10.3 or 10.4, if you can, but you should be able to make this drive work in 10.2 (and still use the original for OS 9 and DVD Player) and decide to do the other upgrades later on if you want.
http://eshop.macsales.com/item/Pioneer/DVR112/

Unable to install new driver for Quadro 4000

Hello
downloaded the new version 304.00.05f05 for quadro 4000. unable to install the new driver for NVIDIA Quadro 4000.
By clicking on the DMG I get a message "high-os-title high-os-message superimposed on the installer window
old NVIDIA driver already installed ; CUDA updated automatically to version 5.0.45
OS : Mountain lion
anywhere button activated in security window
Please help

Try downloading the update again. Perhaps the one you have got corrupted during the download process.
You can install updates in the Safe Mode and it should eliminate the possibility of other software interfering with the update process.
Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem.
Safe Mode
Safe Mode - About

How do i find a new driver for itunes?

how do i get a new driver for my 2nd_gen ipod nano? it wouldn't sync and when i ran a test it said the device couldn't be found. when i tried to click on itunes it said i didn't have a driver for it anymore. is there anyway to get another driver without losing everything i have in itunes?

Hello there,
I would start with this Apple support article related to your issue.
http://support.apple.com/kb/ts1496
B-rock

Is there an Update Driver for my Graphics card, AMD Radeon HD 6970M 2048 MB , in a 27inch mid 2011 iMac? thank you!

Is there an Update Driver for my Graphics card, AMD Radeon HD 6970M 2048 MB , in a 27inch mid 2011 iMac? thank you!

THank you very much, I I have a ton of Adobe programs on my mac and i think a Cuda driver update was installed with it, it just popped up the other day in my system settings and is asking to upgrade my graphics card, but i don't have the same card as this update... so i thought i would double check! thank you again.

New driver for Broadcom wireless cards

Similar Messages

Maybe you are looking for