New Dual Core Center "it rocks"

There is a new dual core center on MSI's 975x Power up page http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=746&kind=1
I have tested it quite a bit today .. it rocks...
Everything works ...
It even recognizes my non-MSI Nvidia video card...
Just take the time to set up your separate profiles and save them, otherwise you will keep booting into MSI's default..
So set up your own profiles...
This is the first time that this application has ever worked properly for me ..
and it is great ..
Download it and enjoy...
Be safe and Have fun

The old version that was on the site was 1.0.2.4, this version is 2.0.0.2
Here is what was fixed since that version, taken from the patch notes:
Quote
[ Dual Core Center ]
1. MSI hardware monitor & overclock & fan control Tool & Voltage control
2. Dynamic overclock I & Dynamic overclock II for motherboard & VGA
Support list :
MB:
   MS-7173 v2.2,MS-7176 v3.0,MS-7226(v1.0,v2.0),MS-7238,MS-7241 v1.1,MS-7246 v2.2,MS-7250v1,MS-7253 v1.1,MS-7255(v1.2,v2.0),MS-7267 v3.0,MS-7280,MS-7309 v1.2,MS-7325
   MS-7350
VGA:(full function support model)
   ati:   V044
   nvidia: V046,V060,V069
   v1.0.2.5 start to support all nVidia/ATI AGP/PCI-E VGA Card
OS : Windows 2K,XP32,Vista32/64
=========================================================================
   version 2.0.0.2 (2006/12/28)
      a. fix ICS954519BGLF(MS-7246v2.1) writing registers when overclock
      b. add xml.manifest to run directly, without run as administrator
      c. modify RUSHTOP_IOCTL_813 for ICH7(MS-7176 v3.0) and ICH8(MS-7238 v1.0)
      d. modify IOCTL_NTGLM7X_DETECTLM78 for ICH7 and ICH8
      e. update VBios.dll,FlashSys.sys,VGADLL.dll(12/21)
      f. new mainboard:
         MS-7226 v2.0 (Chipset: nVidia C51XE+MCP55PXE, ClockGen: NVAPI, no Watch-dog, A7226NMS.30A)
      g. fix MS-7246 v2.2 CPUFANIN0 divisor error to cause fan speed wrong issue
      h. modify W83627EHG/DHG CPUFANIN0/CPUFANIN1 divisor reading to correct fan speed
      i. add 5 mode(av,game,..) overclock after resume from S3S4
      j. new mainboard:
         MS-7350 (Chipset: nVidia C55+MCP51, ClockGen: NVAPI, no Watch-dog, A7350NMS.102)
      k. add MS-7226 v2.0 NB Fan and CPU Voltage adjustment
=========================================================================
   version 2.0.0.1 (2006/12/05)
      a. change AP version be v2.0.0.1
      b. support Vista32/64
      c. support MS-7241 v1.1, MS-7267 v3.0, MS-7309 v1.2, MS-7173 v2.2
      d. new mainboard:
         MS-7255 v1.2(Chipset: VIA P4M890M+VT8237A, ClockGen: ICS903002DFLF, Watch-dog(MS7))
            - support FSB200 and Conroe FSB266 overclocking
         MS-7253 v1.1(Chipset: VIA K4M890M+VT8237A, ClockGen: RTM866-895, No Watch-dog)
         MS-7255 v2.0(Chipset: VIA P4M890M+VT8237A, ClockGen: RTM870T-580, No Watch-dog)
            - support FSB200 and Conroe FSB266 overclocking
      e. fix Intel fsb200/Conroe show fsb wrong when set bios fsb not be default fsb
      f. fix MS-7253 v1.1 underclock smoothly by M-f code
      g. new mainboard:
         MS-7176 v3.0 (Chipset: Intel LakePort+ ICH7, ClockGen: ICS 9LPRS914EGLF, Watch-dog(MS7), A7176IMS.706)
=========================================================================
   version 1.0.2.6 (2006/10/17)
      a. support Intel Conroe CPU serial
         - E6300 (FSB266,EIST,CPUID=0x6F6h)
         - E6700 (FSB266,EIST,CPUID=0x6F5h)
      b. fix Intel Conroe CPU Ratio error issue under EIST mode
      c. support Intel EIST for MS-7238 v1.1 (A7238IMS.110)
      d. check EIST enable/disable register by cmos
=========================================================================
   version 1.0.2.5 (2006/10/05)
      update VBios.dll(10/3) to support all nVidia/ATI AGP/PCI-E VGA card
      add unload NTGlm7x/RushTop driver in registry whem close AP
      rebuild Glm7x.dll and NTGlm7x.sys(10/05)
=========================================================================
If you see stuff that is relevant to your Motherboard, it is worth giving it a try...
Be safe...

Similar Messages

MSI P35 NEO & dual core center problem

hi, i have a problem with my motherboard msi, Bios 1.2 and the dual core center 2.0.0.8 ,since days ago, the msi dual core center 2.0.0.8 so many times shows fan speeds alerts false alarms from the cpe temp, for that reason, i upgraded the appl to 2.0.1.6 ( the last),i set the oc level to 25% like with the older version, but time later the pc crash and put a black crash screen and it dont let me to overclock my cpu , i get back to 2.0.0.8 but the fan alarm dont stop, and i dont know if the newer version fix this problem
any help?
sys specs
msi p35 neo bios 1.2
core 2 quad q6600
2 gb value ram
psu duck

right, but i like to use msi dual core center, because i dont like to have the pc overclocked all the time, anyother suggestion for this?
thanks for the reply

Dual core center locks up vista

I have my new system up and running with a fresh install of vista x64. Everything works great until I install dual core center. Once DCC is installed, the computer will boot up and start windows, but it freezes withing a few seconds of loading the windows desktop. I read some other posts that said not to use DCC, but why not? Is there a known reason that it doesn't work.
If I can't use dual core center, what is a good program to start out with some very basic oc'ing?
k9a2 platinum
phenom 9850 be
4GB ram (2x2GB)
ati 3850 graphics

Quote from: bearcat9 on 11-May-08, 00:21:28
I have my new system up and running with a fresh install of vista x64. Everything works great until I install dual core center. Once DCC is installed, the computer will boot up and start windows, but it freezes withing a few seconds of loading the windows desktop. I read some other posts that said not to use DCC, but why not? Is there a known reason that it doesn't work.
That is the very reason why we don't recommend it. It has habit of causing people problems. Look her for alternatives: https://forum-en.msi.com/index.php?topic=107133.0
Quote from: bearcat9 on 11-May-08, 00:21:28
If I can't use dual core center, what is a good program to start out with some very basic oc'ing?
It's called the BIOS!

Dual Core Center runs with strange noises

Hello
I just bought a new PC: MSI P45NEO-F (Motherboard) and GALAXY 9600GT (Graphic Card).
I installed Dual Core Center since it was provided as an utility software.
As soon as Dual Core Center is running, strange noises come out from the speakers and they never stop until I close the application. I have to switched off the speaker because it is unbearable. Except the sound from the speakers, computers is working OK. Even Dual Core Center with this noise seems to work.
I am not an expert at all.
Does anyone had this problem or would know where it comes from ?
Computer seems to work OK when Dual Core center is not running.
Thanks

Hello
I just had another look at my problem and I noticed that one of the figure displayed in Dual Core Center was in red. It is the fan speed of system1 in the Fan Menu: the number in red was 995 RPM. As soon as the figure goes above 1000 (it does happen from time to time) the figure becomes green and the strange noise stops.
I have two fans in my computer: the CPU fans whose speed is around 1530 and the System1 fan whose speed is around 995 RPM. There are some setup in the BIOS regarding Fans but I guess everything is properly setup.
Anyway is there anything wrong with a fan system1 speed below 1000 ? Why would Dual Core center put the figure in red in that case and make a noise as a warning ?
Thanks for your help/advices.

Dual Core Center - not worth bothering with?

Hi,
New to this forum so please bear with me!
Just installed a K9N Neo V3 and upgraded to latest BIOS.
Have installed latest version of Dual Core Center software and when I select the the Silent option withing a few seconds the window pops up and it starts playing a Siren sound like something is wrong. It reports the CPU FAN RPM as quite low - but then I have a Artic Cooling Freezer Pro 64 CPU cooler which controls the speed based on temp.
I cant find any instructions on how to use / configure Dual Core Center. How do you adjust warning levels?
Can you adjust the System Fan Speeds based on Temperature?
I tried uninstalling Dual Core Center and installing the latest version of SpeedFan 4.33 but that wont show any FANs at all on the main screen or config screen.
Are there any other software worth trying?
Thanks In Advance

Quote from: harry66 on 05-January-08, 19:29:02
The two SYS FANS that I have installed.
Anyways I seem to have solved the problem - the two fans came with Molex adaptors etc so I just swapped the 12v & 5v connectors round and connected them to the PSU rather than the MB connectors.
Now the PC is ultra queit and still has two fans sucking warm air out - albeit only running at around 900RPM
OK... I'D Like to Understand, If those fans came with Molex Adaptors, How did you Connect them to the Mainboard in first Place?
Now this is How I modded 2 X 12mm FANS that were Molex and came along with my Case.
Chopped off a 3 Pin cable from Old Cpu Cooler That was not being used, Insert the 3 Pin Cable into one of the Fans Molex Adapter as an extension. Because the molex connectors on these fans are Usable via Male/Female, simply connect The 2nd Fan to the 1st one and hooked it up to My Fan Controller, now I have the Ability to control 2 fans on 1 Knob, and I Do Wick them both up to keep My System cool under Load. The Fan Controller is the reason I needed them on a 3 Pin, could easily use both fans on One 5V ZM-MC1 connector just the same.

Dual Core Center working in Vista but not XP on a dual boot system?

Hi All.
My system specs are:
Dual Boot Windows XP Pro SP2 and Windows Vista Ultimate
Temps for CPU in Vista averaging at 43 - 45 degrees in XP averaging at 38 to 42 degrees. It never seems to go much higher than 53 on Load.
Thermaltake Soprano tower
MSI K9N Diamond Motherboard
Hiper 580watt Modular PSU
4GB OCZ Gold 6400
AMD X2 6000+
2 X 300gb diamond maxtor 10 HDD
MSI Geforce 7800gt
DVD Rom
LG Dual Layer DVDRW+/-
I am running a dual boot system with Windows XP Pro SP2 on one partition and Windows Vista Ultimate on the other. Both operating systems seem to be operating properly except for an odd situation with Dual Core Center. In Windows XP Dual Core Center only indicates the Mainboard properties - No VGA, whereas on Windows Vista Ultimate Dual Core Center indicates both VGA & Motherboard properties. I have installed MSI Nvidia drivers for the Graphics card & also tried straight Nvidia drivers for the card but it has made no difference VGA will not show up in XP. Yet on installing Dual Core Center on the Vista partition VGA showed up immediately. Can anyone help.
If anyone can come up with an answer to this it would be a real help.
Many Thanks in advance.

have you try to update/install the dual core driver from amd?

NX7600GT Diamond Plus and fan speed with Dual Core Center

I just got a NX 7600GT Diamond Plus for my HTPC. I noted that Riva Tuner and other utilities are not able to control the fan speed of the video card. The only way one can control the fan speed is via Dual Core Center and 3D Core Cell. The problem is that the default setting for fan speed on Dual Core Center is too high and clearly audible. How can I get Dual Core Center to start with user defined presets during windows start-up/boot-up ?
What I want to do is to put the fan into 'SILENT' mode automatically during Dual Core Center start-up. Any ideas / suggestions ?

Quote from: BOSSKILLER on 17-January-07, 00:44:11
well no need to edit manually, MSI provided everythink in easy way from core center.
select advanced mode, create your custom profile pickup your desired settings,(setup maximum FAN RPM via buttons) and save it to custom profile.
suggest you to read help section from program.
So the custom profile is automatically loaded every time DualCoreCenter starts up ? Maybe there is something wrong with my install of DCC, I cannot get it to load custom profiles automatically upon startup. I can save the changes to say "User Profile 1" but the profile active on startup always is the "default" profile ...

30 GB video iPod doesn't show up on my new Dual Core G5...help!

Hello
I'm trying to connect my 30GB video iPod to my new Dual Core 2.0 GHz G5, but nothing comes up on the desktop or iTunes. The icon on the iPod just shows the charging symbol...
this G5 is NOT connected to the Internet, however I just updated the iPod software on another computer...I tried bringing over the latest iPod Updater from the other computer, but this doesn't work either...
Is there anything I can do to get this to work?!
Thank you
chris

Chris,
Try resetting the iPod while it is connected to your computer...
Resetting iPod
Also, see if this helps...
iPod doesn't appear in iTunes or on the Mac desktop
btabz

Is there any way to monitor CPU temp without Dual Core Center

I hate Dual Core Center it has done nothing but lock my system up is there any alteranative to monitor CPU temp/Fan speed

Quote from: Maesus on 21-March-07, 23:34:06
I use speedfan... but for Core 2 Duo, I don't think I have to worry about the CPU temp anymore... they are really coooooooooooooll
Does anybody have an idea what the optimal temperature range for core duo cpu:s are? I used to have an Athlon XP, which was typically 65 °, now the my E6600 is running at 35-40 ° [celsius]. But where's the critical temperature where it burns?

DKA790GX Platinum, have problem with changing FSB in Dual Core Center

Hello guys, freshblood is here,
I change fsb in Dual core center, but unfort. core temp and CPUZ don't reflect any changes.

I agree. The BIOS gives you better control with better options.
Quote from: Jack the Newbie on 26-January-09, 02:14:05
Dumb MSI Dual Core Center. It is not the best tool ever developed. Use the BIOS for overclocking your system.

Final Cut Pro 4 won't work on new Dual Core PowerMac

Hi, I was lucky enough to win Final Cut Pro 4 & DVD Studio Pro 2 in a competition nearly 2 years ago and was really looking forward to using them when I eventually could afford a more Powerful Mac.
My new Dual Core 2Ghz PowerMac arrived the other day and after installing then clicking on Final Cut Pro 4 I get the message-
Configuration error.
'This software requires certain hardware or software which is missing'
AGP Graphics Card.
Does this mean I have to buy another Graphics card?
I have a NVIDIA GeForce 6600 256MB SDRAM Graphics card with my Dual Core 2Ghz PowerMac.
Thanks.

No, you don't need to by another graphics card.
A quick search turned up these 2 links:
http://discussions.info.apple.com/.68be1a60
http://discussions.info.apple.com/.68bcdaab
You will find your answer in those 2 threads.

New dual core for running osx and windows-need autocad!

considering a new desktop. I own a powerbook g4
Machine Model: PowerBook5,6
CPU Type: PowerPC G4 (1.2)
Number Of CPUs: 1
CPU Speed: 1.5 GHz
L2 Cache (per CPU): 512 KB
Memory: 512 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.1f3
and use mostly for Adobe Creative suite and Powercadd 7.
I then own a Dell Inspiron with Windows XP to run Autocad.(which I dislike PC)I would rather use a mac and wonder if the new dual core is something I should consider or is it not worth the pain?

You have to use the crossgrade/update 7.2 for Logic Pro to work on an Intel Mac.
It is now available and people have ordered it but I don't think anyone has received their upgrades as yet.
It has been pointed out both by Apple and in numerous other places that Logic Pro will not run under Rosetta so unless you have 7.2 it aint gonna be working......
If you DO have 7.2 already, then please tell us more.....

P965Neo-F V2 MSI Dual Core Center Support

Hi.
I brought MSI P965Neo-F v2 MB and MSI 7600 GT graphic card, now i installed Dual Core Center and it shows only Graphic card info, is it some bug? i tryd core center and it showd me alot wrong info, like no cpu fan, sys fan 5k rpm and +12v was 24v. Anyone else having trouble whit DualCoreCenter utility?

all other utilitys lie, 12v shows 24v, 3v shows 0,12, cant be real, and no fans at all:D

Dual Core Center doesn't work at all.

My mobo is P35Neo2-FR. Cpu is C2D E4600. I didn't overclocked it. WinXP professional 32BIT is installed.
.Net 2.0 is also installed.
From some time, I cannot launch Dual Core Center program. When I double-click the Dual Core Center icon,
There is nothing to be launched. I could not understand why the program suddenly didn't work.
Please let me know the solution to successfully launch Dure Core Center program.

yeah! my only experience with DCC is,... after it runs, it straight away turn on the siren, annoy the whole PC, and after 10 seconds, it shuts down my PC! That's the big annoyance already. The next time I reboot, I quickly terminate it from runnign longer, and straight away remove it from my PC. don't even bother to figure out where the alarm settings is.

P6N SLI V2 problem with "dual core center"

I have the P6N SLI V2 with E4400 and 7600gt running XP pro sp 2.
after installing and running MSI's "dual core center" (including .Net framework) I only have the "VGA" option enabled, the "MB" option is disabled as well as the D.O.T option. I tried uninstalling and reinstalling as well as downloading the latest version, but I have the same problem. I get no MB options at all (like no cpu temp, fan speed, core speed etc.). I didn't make any changes to the BIOS yet (other than changing the boot sequence), and ideas?

Quote from: nautica on 15-July-07, 13:19:02
and ideas?
A great one.
Don't use MSI's utilities. Anyone here will tell you that.

New Dual Core Center "it rocks"

Similar Messages

Maybe you are looking for