New dualshock3 controller don't pair with z2 tablet

Today I received my new dualshock3 controller but when I connect it to my z2 tablet and try to pair them after some seconds I receive this message :
Unfortunately, dualshock3 wireless controller stopped
Anyone have the same problem?
What do I do?

Is the controller charged? is it a Sony DualShock 3 or a third party? Are you using the proper cable?
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • My new Macbook Air doesn't pair with my bluetooth speaker (Jambox or Big Blue).  Why?

    I've tried two different bluetooth speakers (Jambox abd Big Blue) and both don't pair with my MacBook Air.  Anyone have the same problems?

    For those interested, i managed to get the Big Blue speaker to pair with my MBA.  I thought I had tried this, but i went to the bluetooth icon and chose Set Up Bluetooth Device.  It recognized the speaker and paired.  Prior to that I was trying the Browse Device option, but that didn't work.  Still nothing on the Jambox though. 

  • My new wireless keyboard won't pair with my mac book pro 10.6.7

    my new wireless keyboard won't pair with my mac book pro 10.6.7

    So are you saying that it does appear in the Bluetooth browser and after selecting it and then entering the passcode the keyboard fails to pair?

  • My new iPhone 6 will not pair with BMW. Previous iPhones have always worked fine

    my new iPhone 6 will not pair with BMW. Previous iPhones have always worked fine

    Hi, thanks for the reply - it's on 8.1 already!

  • HT201412 my new iPhone 5c does not pair with my Mac Pro via blue tooth while Mac Pro do find iPhone 5c and display paired

    my new iphone 5c does not pair with Macpro while Macpro display pairing via blue tooth and also my new iphon 5c does search other smart phones while Macpro does so

    The iPhone supports only a limited number of profiles and will only pair with a computer for internet sharing (tethering, hotspot if your cellular carrier plan supports that). http://support.apple.com/kb/HT3647

  • My new iPhone 4S won't pair with my iPad

    I recently got a new 4s and it won't pair with my iPad 2. I have had 2 4s that have always successfully paired with my iPad. Any suggestions on how to get them to pair?

    Over Bluetooth?  No way, unless you're sharing a Personal Hotspot over Bluetooth and all devices are syncing to shared accounts over the internet, but not peer-to-peer over Bluetooth.
    If you think otherwise, please explain exactly how, and what apps were being used to sync texting, calendars, notes, reminders peer-to-peer over Bluetooth.

  • New hp drivers don't work with 10.8.2 a fix??

    Downloaded new hp driver supposed to work with 10.8.2, but doesn't
    Any suggestions?

    Would you tell us which exact model of HP Printer you have, and which version number of driver you downloaded?
    Hope this helps

  • New iPod Touch will not pair with New Resound Linx hearing aid

    Greetings
    Received a new pair of hearing aids aweek ago,  Resound Linx.  Very nice indeed.
    Days after I purchase a New iPod Touch, down loaded all updates and the Resound Smart app.
    Followed instructions to the letter but am unable to pair the hearing aids with the iPod.
    Hearing aids work fine and have fresh batteries.  Bluetooth turned on, iPod continues to search
    but can not find hearing aids.  Has anyone had this problem, can anyone offer any suggestions.
    Many Thanks
    David

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • New SCCM clients don't communicate with SCCM servers

    Hi,
    I've got an infrastructure of 4 SCCM 2012 R2 servers, 1 Primary in US, 3 secondary in Europe, Asia and US again.
    As I discovered, European clients visible in SCCM console as "active" in Client Activity are discussing with the SCCM. All inactives or new clients are detected but don't receive any policies or can't be remoted by SCCM (RDP is working).
    I checked the log files, the boundaries, the certificates, the sites, MPs, client settings, DNS and I don't see any problems.
    We don't have firewall between sites and there is a GPO disabling the firewall on clients, so I don't believe it could be that issue.
    I tried to Telnet the SCCM server from a "blank" client on port 10123 and it's reachable.
    as far as I can see, other sites are fine, but still waiting feedback from local IT colleagues.
    what else could I try?
    thanks for helping.

    This typically means the client's are NOT falling within the boundaries of you site. AKA, the IP range not added to CM12, DHCP scopes changed, AD subnet changed, etc.
    I disagree. Boundaries do not come into play in that scenario. The client (once assigned to a site! And that can also be done manually without any boundaries) will happily retrieve policies even without any boundaries defined. 
    I agree that once they are assigned to a site they don't need any boundaries but are the clients assigned? Are they using auto assigned them?  If you are using auto assigned and the boundaries are wrong then they will only see the two items.
    So the question is are they assigned to the site? (Just because they show up within the console do not mean that they are assigned)
    IMO the problem sound like they are using auto assignment, hence the question about boundaries.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • New Ipad (3) won't pair with devices

    I have two separate speakers that I used with no problem with my iPad 1. I replaced it with the New iPad and neither speaker now works. Do I have a defective iPad that needs replacing?
    Details: the New iPad is 16G, 4G-capable but I choose to use wifi only and have not bought a plan. One of the speakers is the Bose Soundlink. I forget the brand of the other one. Neither has ever successfully paired. The Bluetooth symbol does not appear on the upper right-hand corner of the iPad screen most of the time. (It does occasionally when I fiddle with turning Bluetooth on and off through "settings"). When it "searches" for devices, the only device it ever finds is my useless Blackberry. Neither of the 2 speakers even show up. I've tried resetting the devices, and resetting the iPad including a complete reset that involved restoring it from an iCloud backup. Nothing works.

    Not entirely accurate.  Per a kb article at Apple.com:
    Apple peripheral devices may request more than 500 mA (Milliamps) at 5 V (Volts) from a port to function or to allow for faster charging. Such Apple peripheral devices include:
    Apple MacBook Air SuperDrive (when connected to supported computers)
    Aluminum Wired Keyboard*
    iPod
    iPhone
    iPad
    To meet requests for additional power from these Apple peripherals and devices, some Apple computers and displays can provide up to 1100 mA at 5 V through the port to which the Apple peripheral or device is connected.
    For whatever reason, my iPad has been much better for most of yesterday and today.  As others have noted, it still does not increase it's charge while in use (nor does it discharge much, as though the charger is providing just enough power to run the iPad while in use).  I think when I was first restoring everything and loading up apps, etc., it was running VERY HOT which probably meant it was drawing a lot of power from the battery, and the charger could not keep up (which meant the battery was slowly discharging). 
    Now that activity on my iPad is more normalized, it's not as hot, but still doesn't charge much while in use.
    I'm sure Apple can do something to increase the charge rate so it does charge faster when asleep.  My iPad 2 charged a bit too slow for my tastes and now the new iPad is even worse!

  • New mac mini won't pair with new wireless keyboard

    How do you set up a new mac mini with a new wireless keyboard bought separately ... computer does not see the keyboard.
    I've seen this question asked before but the only answer seems to be to get a usb keyboard for set up. So do I need to go out and buy another keyboard to complete the set up or is there a way around this
    Thanks.

    see > New Apple Mac Mini and Apple Wireless Keyboard Un-boxing - YouTube
    If you missed the setup, most any cheap'o generic USB keyboard will work with the Mac Mini.

  • New Creative players don't work with Dell Laptops

    i found out the source of my problem (pretty sure anyway)
    Dell underpowers their USB ports on the laptops, so then i can't use my Vision:M because it is not recognized, even though all the files between my desktop and the laptop are nearly identical (all the MTP support stuff is for sure)
    just thought i would share, and i hope creative comes up with a fix, there is going to be a hell of a lot of pissed of people

    **bleep**!? I have this problem too (perhaps). I have now gotten 2 Zen Nano Pluses and they both APPEAR to work out of the box. As soon as I hook it up to my Dell C series (hey, my company makes us keep them 4 years...) and sync the music, the thing plays for 3 seconds and shuts off. The only odd thing I see is that I get this message about hooking to a /2 powered USB hub, but the message seems to indicate everything SHOULD work fine, but it seems to fry the inards of the Zen. Oh and to the guy who implied that Creative should not have to create a fix for this, well, who do you think makes a **bleep**load of computers in the world? Dell. Seems to me I'd want to know how my little mp3 players acted with computers from one of the world's largest makers.
    And if any of you guys from Creative are bothering to look in on these forums, people in the real world don't replace their computers every year. They keep them for several years. So, please keep some old models around so you won't have a bunch of pissed off customers.
    But more to the point. Are internals of the mp3 player fried or can they be fixed with software. And applying the firmware RETROGRADE doesn't work. I say retrograde because my Nano plus had .04 firmware out of the box and the little file the techie sent me DOWNGRADED the firmware to .03. Marvelous!? Such technical support. It leaves one speechless.

  • New SCSI controller on Netra T2000 with Solaris 10

    I have the following problem. I just have installed additional SCSI controller to my Netra T2000. The controller is X4422A Sun Dual Gigabit Ethernet + Dual SCSI PCI Adapter. After starting OS I can see the following output of cfgadm -al:
    Ap_Id Type Receptacle Occupant Condition
    c0 scsi-bus connected configured unknown
    c0::dsk/c0t1d0 disk connected configured unknown
    c0::dsk/c0t3d0 disk connected configured unknown
    c1 scsi-bus connected configured unknown
    c1::dsk/c1t0d0 CD-ROM connected configured unknown
    glm0:scsi scsi-bus connected configured unknown
    glm0:scsi::sgen14 tape connected configured unknown
    glm0:scsi::sgen15 med-changer connected configured unknown
    glm0:scsi::sgen16 unknown connected configured unknown
    glm0:scsi::sgen17 unknown connected configured unknown
    glm0:scsi::sgen18 unknown connected configured unknown
    glm0:scsi::sgen19 unknown connected configured unknown
    glm0:scsi::sgen20 unknown connected configured unknown
    glm0:scsi::sgen28 tape connected configured unknown
    glm0:scsi::sgen29 unknown connected configured unknown
    glm0:scsi::sgen30 unknown connected configured unknown
    glm0:scsi::sgen31 unknown connected configured unknown
    glm0:scsi::sgen32 unknown connected configured unknown
    glm0:scsi::sgen33 unknown connected configured unknown
    glm0:scsi::sgen34 unknown connected configured unknown
    glm0:scsi::st1 tape connected configured unknown
    glm0:scsi::st2 tape connected configured unknown
    glm1:scsi scsi-bus connected unconfigured unknown
    usb0/1 unknown empty unconfigured ok
    usb0/2 unknown empty unconfigured ok
    usb1/1 unknown empty unconfigured ok
    usb1/2 unknown empty unconfigured ok
    The glm0 and glm1 are the SCSI busses. Now, my problem is to access the tape drives (in the autochanger) connected to that controller.
    I cannot find out how to create mount points for those tape drives.
    Any suggestions?
    Cheers,
    Sylwester

    Did you do a boot -r?
    That will do a 'devfsadm' which does all the /dev stuff for you.
    Do you have the latest Recommended patch kit to make sure all your drivers are up to date?

  • My new iPhone 5 will not pair with the Bluetooth in my 2008 Prius. I see that I'm not alone. Will there be a fix for this problem ?

    Will there be a fix for the Bluetooth problems that me and many other iPhone 5 owners are experiencing?

    Go to the settings in your Jeep, "forget" the iPhone. And on the iPhone "forget" the jeep. Then put the Jeep in Pairing Mode and tap Settings/BlueTooth on the phone and pair them anew (which sounds less confusing than "repair them").

  • My iPad Bluetooth don't pair with my android

    I have the iPad mini and I can't Bluetooth files from my android please help

    Transfer the files from your android device to your computer and use iTunes on your computer to sync those files to your iPad.

Maybe you are looking for

  • How can you tell if an iPod touch has the new apps?

    Having seen the updates to the ipod Touch I'm finally ready to buy one. From the keynote I gather that new units shipping from the factory after 15 Jan have the new software, old units do not and, unusually for apple, even if you buy an old software

  • Vendor with Bank details - How to replicate?

    Hi guys, I need help for replicating Vendor bank details. I`m transferring vendors by BBPGETVD, but the bank details don`t go to SRM. I have tried to transfer basic data by R3AS where the object name is DNL_CUST_BNKA, didn`t work as well. I`m using t

  • Remote phone gets an IP, but won't register in CM

    I have a remote user with a an 7941 + an 871 Router that can't get her phone to register in CM and thus can't use her phone. It shows an IP in CM and the IP is set to static on the 870. Any help would be great. Regards,Chet

  • Transaction TAN is missing

    dear gurus, while creatinfg sales order it is showing transaction TAN is missing and in details item category tan and mrp type is nt allowed .tell me plaz wt to do?

  • Sort an element out of 2-D array

    Hi guys, how to sort an element out of a 2-D array. For example I like to know the value of element in array[0][1]. Solved! Go to Solution.