New DW Web Manager

I have just been given the task to obtain DW and create a web
site for our town. I have experience with Front Page but not DW. I
have downloaded the trial version and have seen where there are
tutorials. I am looking for a structured approach to quickly learn
DW and all of the capabilities of CS4 in order to scope out a plan
for this project.
Any recommendations on how to start? Your input is much
appreciated!!

If you are only familiar with FP, then you are in for a
steeeeeeep climb.
DW will expect you to have at least a basic familiarity with
HTML and CSS,
and will work best when you have much more than this. I'd
suggest you
discard the idea of working through tutorials on how to use
the tool, and
spend some quality time with tutorials that teach you the
underlying
concepts of HTML and CSS. When you understand those, DW will
be a piece of
cake.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ro-j" <[email protected]> wrote in message
news:ghuq2q$su0$[email protected]..
>I have just been given the task to obtain DW and create a
web site for our
> town. I have experience with Front Page but not DW. I
have downloaded the
> trial
> version and have seen where there are tutorials. I am
looking for a
> structured
> approach to quickly learn DW and all of the capabilities
of CS4 in order
> to
> scope out a plan for this project.
>
> Any recommendations on how to start? Your input is much
appreciated!!
>

Similar Messages

WLC: which software-version support SHA2 certificates for Web Authentification and Web Management ?

Hello,
I tried to install new SHA2 3th-Party certificates on our WLCs. There are old WiSM1-Boards and 2504 to support our old 1230 Access Points, running 7.0.251.2, which didn't install it, although the config manual for 7.6 and 8.0 say that SHA2 certificates are supported since 7.0.250.0. When I tried to install the SHA2-certificates I get the message "File transfer failed" an the log says:
*TransferTask: Dec 12 13:22:14.394: #UPDATE-3-CERT_INST_FAIL: updcode.c:1869 Failed to install Webauth certificate. rc = 1
*TransferTask: Dec 12 13:22:14.394: #SSHPM-3-KEYED_PEM_DECODE_FAILED: sshpmcert.c:4085 Cannot PEM decode private key
I tried to install the same certificates on our WiSM2-Boards, running 7.4.121.0 and I failed too. The same certificates could be installed on a 2504 running 8.0.100 without any problems.
In all 3 cases I tried to install unchained certificates for web management and Level 3 chained certificates for web authentication. I used the following guides to get the certificates (e.g. taken from the config manual 8.0.100):
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.pdf
Which software versions support SHA2 certificates and which didn't ? Is the a list for it ?
Regards

Hello,
I solved the problem. First I used a Debian Linux system with Openssl 1.0.1. After I searched the internet using one of the log messages above I found sites which mentioned to use Openssl 0.9.x. So I tried a productive and security fixes Debian Linux System running Openssl 0.9.8 and I succeeded. The wlcs accepted the certificate files and used it after a reboot. The Web GUI still shows a SHA1 Fingerprint, but the certificate signature Algorithm is SHA2:
Signature Algorithm: sha256WithRSAEncryption
When you check the openssl.org homepage Openssl 0.9.8 is still one of the actual version of openssl and is still available and fixed. But the Openssl Roadmap says:
"We don't want to have to maintain too many branches. This is likely to include a timescale for the EOL of version 0.9.8"
I don't know the differences between certificates made with openssl 0.9.8 and 1.0.1. Is there anybody who can explain it to me ?
Regards

New ZENworks Configuration Management 11 Forums

Welcome to the new ZENworks Configuration Management 11 Forums.
Information about ZEN ZCM 11 can be found at http://www.novell.com/products/zenwo...tionmanagement
Thanks for participating in the Novell Forums and we hope your experience here is a good one.

Hi Shaun,
That is perfect..
Please can you put that somewhere obvious on the website, The web site
tries to break it down but it gets very confusing...
Thanks very much for the quick reply
Peter
On 2/02/11 4:59 PM, Shaun Pond wrote:
> Peter,
>
> product info: http://www.novell.com/products/zenworks/
>
> what features are in each edition:
> http://www.novell.com/documentation/...a/brkfw3r.html
>
> that should give you a good start...

BM access rule and port for Web Manager

The Netware Webacess and the Netware Web Manager is working fine
internally. What are the ports to open and the rules to create on the
Border Manager so it can be access froum outside. How to configure the BM
Omar

In article <MLMqe.411$[email protected]>, wrote:
> The Netware Webacess and the Netware Web Manager is working fine
> internally. What are the ports to open and the rules to create on the
> Border Manager so it can be access froum outside. How to configure the BM
>
WebAccess just (normally) wants port 80. You can static NAT it, or reverse
proxy it through BMgr. Older versions of BMgr (3.6 or earlier) put in
default filter exceptions for reverse proxy (both port 80 and 443), but
later versions require you to add your own filter exceptions.
NetWare Web Manager - do you mean for Novonyz Web Server? If so, the port
used depends on what you configured for it. You could use static NAT, or
generic tcp proxy, or (I think) reverse proxy for whatever port Web Manager
is using. Newer web manager for Apache uses port 2200, I think.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Moving IRM Licensing and Web Management Servers

We are in the process of moving out IRM Licensing and Web Management server (both on the same machine) to a new machine. We want to keep the same database which is on a different machine.
I have done this before by creating a new database, installing the software into that database and then shutting down the server and modifying some files.
I'm not sure where I found the procedure. It does not appear to be in the els-install.pdf document. Does anyone know of a document outlining this procedure?

Hi,
Have a look at KM note 451747.1 which details the steps for any IRM Server migration.
Regards,
Frank.

1041 Access Point -- Web Management Login Timeout

I've looked thru the various screens but I have not found anywhere to change the Timeout value on the login to Web Management of my 1041 Access Point. Is that definable?
It seems like if you pause for any amount of time, you have to login again before you can do anything. The time window is just annoyingly small and I want to bump it up to something else.
Thanks
Mark

You need to do it thru command line... I havent test it.. but AP accepts the command...
Use THIS COMMAND...
ip http timeout-policy idle seconds life seconds requests value
Example:
Router(config)# ip http timeout-policy idle 30 life 120 requests 100
(Optional) Sets the characteristics that determine how long a connection to the HTTP server should remain open. The characteristics are:
•idle—The maximum number of seconds the connection will be kept open if no data is received or response data cannot be sent out on the connection. Note that a new value may not take effect on any already existing connections. If the server is too busy or the limit on the life time or the number of requests is reached, the connection may be closed sooner. The default value is 180 seconds (3 minutes).
•life—The maximum number of seconds the connection will be kept open, from the time the connection is established. Note that the new value may not take effect on any already existing connections. If the server is too busy or the limit on the idle time or the number of requests is reached, it may close the connection sooner. Also, since the server will not close the connection while actively processing a request, the connection may remain open longer than the specified life time if processing is occurring when the life maximum is reached. In this case, the connection will be closed when processing finishes. The default value is 180 seconds (3 minutes). The maximum value is 86400 seconds (24 hours).
•requests—The maximum limit on the number of requests processed on a persistent connection before it is closed. Note that the new value may not take effect on already existing connections. If the server is too busy or the limit on the idle time or the life time is reached, the connection may be closed before the maximum number of requests are processed. The default value is 1. The maximum value is 86400.

New to Web Services - need to call a HTTPS web service from PL/SQL

I am new to Web Services and need to call HTTPS web service from PL/SQL program. I am using 10g Database.
I have been reading there are 2 options -
1. UTL_HTTP - with this package its possible to call HTTPS web services
2. UTL_DBWS
Questions -
1. Is it possible to call a HTTPS web service using UTL_DBWS ? I have not been able to find any information on it.
2. Can someone point me to UTL_HTTP and UTL_DBWS examples calling a HTTPS web service ?
3. The HTTPS web service that I need to call needs username/password to connect - how will I incorporate this in the pl/sql code ?
Appreciate the help.
Cheers,
newWebServicesUser

Hi,
1. UTL_DBWS not work for https from what I understand
2. Here is a sample example:
[http://www.oracle-base.com/articles/9i/ConsumingWebServices9i.php#]
Be careful, you must change http/1.0 IN 1.1 inside package SOAP_API.
Here is an example for a prime number where the SOAP message is already construct:
CREATE OR REPLACE procedure test_ws_2
IS
http_req utl_http.req;
http_resp utl_http.resp;
request_env varchar2(32767);
response_env varchar2(32767);
begin
-- Set proxy details if no direct net connection.
UTL_HTTP.set_proxy('http://<USER>:<PASS>@10.0.2.21:8070', NULL);
UTL_HTTP.set_persistent_conn_support(TRUE);
request_env:='<?xml version="1.0" encoding="utf-8"?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">'||
'<SOAP-ENV:Body><GetPrimeNumbers xmlns="http://microsoft.com/webservices/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">'||
'<max xsi:type="xsd:int">10</max>'||
'</GetPrimeNumbers></SOAP-ENV:Body></SOAP-ENV:Envelope>';
dbms_output.put_line('Length of Request:' || length(request_env));
dbms_output.put_line ('Request: ' || request_env);
http_req := utl_http.begin_request('http://www50.brinkster.com/vbfacileinpt/np.asmx','POST', utl_http.HTTP_VERSION_1_1);
utl_http.set_header(http_req, 'Content-Type', 'text/xml; charset=utf-8');
utl_http.set_header(http_req, 'Content-Length', length(request_env));
utl_http.set_header(http_req, 'SOAPAction', '"http://microsoft.com/webservices/GetPrimeNumbers"');
utl_http.write_text(http_req, request_env);
dbms_output.put_line('');
http_resp := utl_http.get_response(http_req);
dbms_output.put_line('Response Received');
dbms_output.put_line('--------------------------');
dbms_output.put_line ( 'Status code: ' || http_resp.status_code );
dbms_output.put_line ( 'Reason phrase: ' || http_resp.reason_phrase );
utl_http.read_text(http_resp, response_env);
dbms_output.put_line('Response: ');
dbms_output.put_line(response_env);
utl_http.end_response(http_resp);
end test_ws_2;
Otherwice for testing url, i recommand you to use that function: Re: Error using UTL_HTTP over HTTPS
it's a verry helpful function when you have an error.
wrote:
When testing using UTL_HTTP, you MUST ensure that you open a new session after importing the SSL certificates into your Wallet,
as I've learned (the hard way) that existing sessions point to the wallet contents that were present when the session was opened.
If you don't realise/know this, it can cause a lot of additional frustration during testing, when you keep getting the ORA-29024 exception AFTER
you've imported the SSL certificates................. ;) 3. i think you can use that after the begin_request but not sure :
UTL_HTTP.set_authentication(r => http_req,
username => ,
password => ,
scheme => ,
for_proxy => );
Edited by: Malebodja on Oct 22, 2009 6:53 AM
Edited by: Malebodja on Oct 22, 2009 6:55 AM

Cannot install Web Management Gateway (KB968934) on Windows 2003 SP2 Enterprise

I have installed the following prerequisites:.Net Framework 3.5 SP1, KB969166 and KB969429.
I also update my Windows Installer to 4.5.
Installation of the Web Management Gateway is failing saying I don't have a prerequisite. I don't know what else it is looking for. The server is a domain controller, running SP2 and fully patched with the exception of Silverlight and .Net Framework
4.0. Below is the log file from the attempted installation. Any help would be greatly appreciated.
0.046: ================================================================================
0.046: 2011/01/06 08:15:10.078 (local)
0.046: d:\a8bdf6e05ac0f8597b\update\update.exe (version 6.3.15.0)
0.046: Hotfix started with following command line:
0.046: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
0.093: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
0.093: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
0.093: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
0.093: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
0.093: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
0.093: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
0.093: C:\WINDOWS\system32\netlogon.dll is Present
0.093: FileVersion of C:\WINDOWS\system32\netlogon.dll is Greater or Equal To 5.2.3790.4482
0.093: Condition succeeded for section Prereq.CheckDCLocatorQFEInstalled.Section in Line 3 of PreRequisite
0.093: C:\WINDOWS\Assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\3.5.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll is Present
0.093: FileVersion of C:\WINDOWS\Assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\3.5.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll is Greater or Equal To 3.5.30729.4126
0.093: Condition succeeded for section Prereq.CheckSDSAMQFEInstalled.Section in Line 4 of PreRequisite
0.093: InstallerVersion is Present
0.093: SOFTWARE\Microsoft\Updates\Windows Server 2003\SP10\KB968934\InstallerVersion is Greater or Equal To Specified Value
0.093: Condition Check for Line 5 of PreRequisite returned FALSE
0.093: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.093: KB968934 Setup encountered an error: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
0.109: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.109: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
3.984: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
3.984: User Input: OK
3.984: Update.exe extended error code = 0xf0f4
3.984: Update.exe return code was masked to 0x643 for MSI custom action compliance.

I appreciate you guys taking the time to respond, I just wonder if you read the details of my question? I have specifically stated that the above hotfix
is installed along with the other prerequisite that the Install Guide mentions. Furthermore I have not only checked the log but posted it for review.
I'm thinking the above advice is almost automated, it is the same as I found in numerous searches. The problem I have here is I DID read the manual, have done what it says and still get this error.
This morning I reinstalled the hotfixes and tried the install again. Here is the log from today:
Please note the bolded line, it seems there is some registry value being checked but I don't know what so I can fix it.
0.219: ================================================================================
0.219: 2011/01/07 06:23:18.359 (local)
0.219: d:\de2e5a04497c892e775b9e2d1a85b1\update\update.exe (version 6.3.15.0)
0.266: Hotfix started with following command line:
0.282: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
0.313: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
0.313: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
0.313: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
0.328: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
0.328: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
0.328: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
0.328: C:\WINDOWS\system32\netlogon.dll is Present
0.328: FileVersion of C:\WINDOWS\system32\netlogon.dll is Greater or Equal To 5.2.3790.4482
0.328: Condition succeeded for section Prereq.CheckDCLocatorQFEInstalled.Section in Line 3 of PreRequisite
0.328: C:\WINDOWS\Assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\3.5.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll is Present
0.328: FileVersion of C:\WINDOWS\Assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\3.5.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll is Greater or Equal To 3.5.30729.4126
0.328: Condition succeeded for section Prereq.CheckSDSAMQFEInstalled.Section in Line 4 of PreRequisite
0.328: InstallerVersion is Present
0.328: SOFTWARE\Microsoft\Updates\Windows Server 2003\SP10\KB968934\InstallerVersion is Greater or Equal To Specified Value
0.328: Condition Check for Line 5 of PreRequisite returned FALSE
0.328: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.328: KB968934 Setup encountered an error: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
0.344: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.344: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
2.016: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
2.016: User Input: OK
2.016: Update.exe extended error code = 0xf0f4
2.016: Update.exe return code was masked to 0x643 for MSI custom action compliance.
Can either f you or anyone else help me identify what it is trying to get from the registry and what the proper value needs to be?

No longer able to access Web Management after Firmware Update [SF200]

Hello!
Today I was attempting to set up SNMP on our SF200-48 switch. I realized we were running old firmware which does not support SNMP and that the most current version (1.4.0.88) does support it. I attempted to upgrade the firmware but it failed, so I decided to install the 1.1.2.0 firmware because I read that the firmware flash process has changed before 1.4
Unfortunately, after rebooting I was no longer able to access web management on the switch. Unfortunately SF200 switches do not support CLI.
The switch is functional and responds to ping, but I cannot get into management to do anything, is there any steps we can try or will I need to reset the switch? After resetting the switch, will I lose any configuration but still not be able to access management? We do not have any other switches to drop in place of this one, and I'd like to minimize downtime as much as possible.
thanks,
Graham Rounds

Hi Graham,
if you are sure that the ping response is coming from the switch then I guess the only thing you could try is the factory reset but you will loose all the configuration. You might call also Small Business Team and open a ticket so they will proceed with RMA if necessary:
http://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
Regards,
Aleksandra

FrameMaker 11 on "Start New, Linked Web Page" in HTML setup

FrameMaker 11 doesn't let me use certain paragraph tags to save certain FM files into separate HTML files. After I checked the box "Start New, Linked Web Page", that item has a Y in the Reference Pages for new web page, but it was being switched back to N during the process of Save As HTML, right in front me. It worked for some other Paragraph Tags, however. Would someone please tell what I missed? Thanks!!

That's ok. I had the work-around by using the paragraph tag that worked,
so it's working now, although I'm still puzzled about the other tag.
Thank you anyway!
On Mon, Mar 10, 2014 at 8:48 AM, Jeff_Coatsworth

The Web Management Service service terminated with service-specific error %%-2147483640,

We've been able to successfully, automatically, deploy our MVC and WebApi to IIS7.5 on Win2008 R2, for some time now. Just this week the MSDeploy stopped working. The System event log shows this error when attempting to restart the Web Management
Service on the targeted Win200 R2 server:
The Web Management Service service terminated with service-specific error %%-2147483640.
The Application log shows this error at the same exact time the above error occurs.
IISWMSVC_STARTUP_UNABLE_TO_ACTIVATE_HWC
Failed to activate the Hostable Web Core (HWC). Web Management Service startup failed. Please reference the Win32 error in this event for further information. Exception:System.Runtime.InteropServices.COMException (0x8007007F): The
specified procedure could not be found. (Exception from HRESULT: 0x8007007F) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at Microsoft.Web.Management.Server.WebServer.Microsoft.Web.Management.Server.Interop.IWebServer.Start()
Process:WMSvc User=NT AUTHORITY\LOCAL SERVICE
The above error is preceded by this warning:
A listener channel for protocol 'http' in worker process '7164' serving application pool 'WMSvcAppPool' reported a listener channel failure. The data field contains the error number.
Which is preceded by this error:
Failed to find the RegisterModule entrypoint in the module DLL C:\Windows\Microsoft.NET\Framework64\v4.0.30319\webengine.dll. The data is the error.
We've attempted to reach the target server using https://ourservername:8172/MsDeploy.axd. The response is:
Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection
Is this occurring because the port is blocked or because the Web Management Service is not running? (The Windows Firewall with Advanced Security dialog says the "Windows Firewall is off" and there are no entries in the firewall log (C:\Windows\System32\LogFiles\Firewall).
We've seen some posts that indicate the certificate may be the issue. Not sure how to actually tell if this is the case though. The CERT we have says it is valid thru 2029.

Hi Nicola,
seems like your web service runtime is not configured correctly. Please check out the following SAP Notes:
Note 1043195 - Configuration of the Web service runtime
Note 1292171 - Troubleshooting Guide: ABAP Web Services Runtime
Kind regards
Heiko

New to Solution Manager...Need Assistance

Hi All,
I am new to Solution Manager.Can anybody plz guide me how to proceed to get knowledge of Solution Manager..
If anybody has some documents useful for the beginner plz send the same.My email is [email protected]
Thanks in advance...
Regards,
Ameya K.

Hi Ameya,
You will get the details about the solution manager at http://help.sap.com/ click on SAP solution manager.
If you want to configre the solution manager go through the link https://service.sap.com/rkt-solman
Hope this helps.
Regards,
Rajesh

New OTN Web Services Center

Check out the new OTN Web Services Center at:
http://otn.oracle.com/tech/webservices/
The new center includes:
* Hosted live Web services like SMS messaging, OTN news feeds and even the scott/tiger database schema all available as Web services
* Tutorials complete with source code and step by step guides to build Web services based on EJB's, Java classes as well as using the Live OTN Web services and even a .NET Web service in Oracle9i JDeveloper
* A contest due to start on August 1 where you will have an opportunity to win prizes like a laptop and free books
* Lots more papers, demos and sample code ... check it out.
If you have feedback or questions, please direct them to the Web Services forum at:
http://forums.oracle.com/forums/forum.jsp?id=642407
Mike.

Currently the patch is only available on MetaLink (metalink.oracle.com) which requires a support account with Oracle. The patch number is 2367149 - see this post for instructions of how to get it from MetaLink:
Re: Database or Client Level?
Mike.

I created thirty pages using ipages and my web manager is having difficulty placing them on my website, some change color, some slide off the screen. Is there a place for problem solving for ipages and website?

Hi, I thoroughly enjoy the ipage program and prefer it to the similar one offered by Word. But my web manager is having countless difficulties. I converted everything to PDF's for him but several of the ipages are loading with a different backround color. He says he has to meta tag each page since this cannot happen automatically. On my Mac, the pages are loading after the navigation bar is selected, and it takes about three to four seconds. On my iphone, however, each page takes at least eight seconds to load and then it slides right off the screen before it can be read. I really want to continue using ipages to update my website but I am a rookie and do not understand why each ipage cannot simply open when someone goes to my website. It would be great to do away with the loading of each page and I would like to also minimize any of my margins. Thanks for any help on this strange matter. Mary

Converting pages to pdf is not the usual way make a website. You may want to try some other app where you can directly create the html which is the customary format for the web.

New MySQL Turbo Manager 2.5.5.0 - Download Now

Hello
Mentat Technologies announces his new
MySQL Turbo Manager Version 2.5.5.0 with
features like :
Query Builder
New editor options.
Improvements in the reports generation.
New export options.
URL : http://www.mentattech.com
Regards,
Peter

I am sorry , this is the product Alchemist code generator. +
Alchemist is a XML Development Environment and code generator for building software applications based on eXtensible Markup Language (XML) technologies from dynamic data resources.
URL : http://www.mentattech.com
Regards,
Peter

New DW Web Manager

Similar Messages

Maybe you are looking for