New E-Sourcing Implementation Need help

Hi folks,
I'm trying to Install SAP E-SOURCING 5.0/CLM 1.0 on windows server. I have installed so far WEB AS JAVA on DB2 UDB database. When I ran setup.exe for E-Sourcing to be installed, I have to fill the following fill in the blanks in which I need your help. I'm not that good with DB2 so If any of you can help me.
1. How to find DB2Driver Path?
2. How to find URL?
3. How to find Schema name?
4. how to find Schema user?
5. How to find tableplaces?
6. How to find Indexes?
7. How to find Blobs?
I'm kinda new in this database. I really appreciate your help.
Thanks,

Debbie,
I was able to find the solution but now In the esourcing when I enter the information I get the following error:
java.lang.ClassNotFoundException:com.ibm.db2.jcc.DB2Driver database connection failed
This is what I have added when it ask:
Driver Class: com.ibm.db2.jcc.DB2Driver
URL: JDBC:DB2///HOSTNAME:5912/SID:deferPrepares=0
username: SIDADM
Pass: SIDADM USER PASS
Schema: SAP<SID>DBA
Table space: SYSCATASPACE, SID#DBD
INDEX: SID#DBI
BLOB SPACE: SID#DBD..
Please help what i'm doing wrong?
Thanks,

Similar Messages

Screen freezes and popup message says I need to do a shutdown and then restart. It does it sometimes 2 times a day. Im new to apple and need help.

My screen freezes and popup message says I need to do a shutdown and then restart. It does it sometimes 2 times a day. Im new to apple and need help.

Bad or incompatible RAM is, more often then not, the cause of most Kernel Panics. It could also just need to be reset.
Here's the most used site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
Here is a great MacFixIt article.
 Good Luck!
DALE

I am new to this but need help. Lion and iCloud have never worked on my desk top or MacBook Pro. Slow or Stop! Is there any way to fix the problem?

I am new to this but need help. Lion and iCloud have never worked on my desk top or MacBook Pro. Slow or Stop! Is there any way to fix the problem?

We need more information. I'm not sure what you mean by both Lion and iCloud have never worked.

New internal order type--need help

Dear all:
i have a case need help.
now i want to create a new internal order type ,and assign a new number range and a default settlement rule to it .
the settlement rule is that the actual costs of this internal order type need to be
sent to a cost element .
what should i do step by step?
thanks!
best regards!

Hi,
2. Order Master Data
2.1 Define Order types (KOT2_OPA)
IMG Controlling  Internal Orders Order Master Data  Define Order Types
An Internal order is created under an Order type. An order type is used for storing various control parameters and various defaults while creating an internal order. It is used for classifying various types of internal orders according to usage for e.g. Real orders for trade fairs, real orders for Capital investment measure, Statistical orders for motor vehicle expenses.
The order type is client-specific, which means that every order type can be used in all controlling areas. A number range is assigned to the internal order type.
Click on New Entries
Take a drop in the field Order category and select 01
Enter
Update the following
Give Order Type :- Z810
Description :- Traders First Real order type
Object Class :- OCOST overhead
Reference Order :- Collective order without automatic goods movement
Residence time 1 :- 12 months
Residence time 2 :- 1 month
Check Commit Management and Check Integrated Planning
Activate CO Partner Updating -You activate this so that allocations between orders and other CO objects (cost centers, projects, etc.), the partner information is retained and whether for each order a totals record should be written.
Save
Click on Field Selection
Here you can hide the various fields or make it as required entry or only display or available for input. Thus while creating internal order only those fields are displayed and available for input.
Click Save
2.2 Maintain Number Ranges for Orders (KONK)
IMG Controlling  Internal Orders  Order Master Data Maintain Number Ranges for Orders
Number Range needs to be assigned to the internal order type. Number range can be internal or external. In Internal numbering system automatically assigns a number from the given number range. In external numbering the user has to manually assign the number from the given number range.
We will configure internal number range for our internal order type Trade Fair
Click on Group Maintain (From the menu bar)
Click on Group  Insert (From the menu bar)
Update the following
From Number: - 910000000000
To Number: - 919999999999
Click in plus icon at the left bottom of the screen
Click Save
You will find internal order type Z810 in not assigned
You need to assign the order type to the group we created above. Proceed as follows:-
Position the cursor on: - Z810 Trade Fair real order type
Click on Arrow Z810 Trade Fair real order type note it turns blue
Select Check mark Z810 A ltd India fair real order
Click Element Group
The internal order type Z910 moves under the group which can be seen as follows:-
Z810: A Ltd India Trade fair real order / Z810 Trader Fair real order type.
Click Save
Select: - Z810: A Ltd India Trade fair real order / Z810 Trader Fair real order type.
Click on Pencil icon.
Click Back arrow.
2.3 Define Model Orders
IMG Controlling Internal Orders Order Master Data Screen Layout
Define Model Orders
Model orders are not orders in the commercial sense, but serve merely as references for creating "normal" orders. Model orders contain default values for the orders in an order type. The Model order is assigned as the reference order in the order type.
When you create a new order, all the fields active in the relevant order type are copied from the model order to the new order.
Example
You want to settle all your marketing orders to the same sales cost center. Stipulate the cost center as the default value in the model order for marketing orders.
When you create a new marketing order, the system defaults this cost center. If you want to settle the order to a different cost center, you can overwrite the default cost center in the orders.
We will create a model order with some defaults and assign it to the Trade fair internal order type
Click Create CO Model Order
Press F4 and select ($$) 03 model order
Click on the master data and update the following
Order: - $$$ Z81000001
Description text: - A Limited Trade affair
Click Save
Assign this model order to the order type Z810
Update the reference order with the model order number $$$Z81000001 in the reference order field
Click on save.
3 Planning
3.1 Maintain User-Defined Planner Profiles
IMGControllingInternal OrdersPlanningManual PlanningMaintain User-Defined Planner Profiles
Check the User defined planner profile ZOCM91 created by us contains the layouts for internal orders.
Double click on General controlling
Planning area: Cost element/activity inputs.
Cost Center: Activities/Prices
CCtr Statistical key figures
Orders: Cost Element/Activity inputs
Ord: Statistical key figures
Select :- Orders: Cost element/activity inputs
Double Click on Layouts for control
3.2 Maintain Planner Profile for Overall Planning (OKOS)
IMG  ControllingInternal OrdersPlanningManual PlanningMaintain Planner Profile for Overall Planning
Here you can specify the time frame for which values are to be planned for Internal order. Further you can also default the number of decimal places and the display factor. Default cost element group while planning.
Double click on Define planning profile for overall planning
Click on New Entries
Select 05 Planned Total
Profile: 810000 General Plan Profile A Ltd
Click Save
Select back arrow
Double click maintain planning profile for order type
Give: - Z810 Trader Fairs Real order type
Give Plan profile: - 910000
Click Save
4 Settlement
4.1 Maintain Allocation structure
IMG ControllingInternal OrdersActual PostingsSettlement Maintain Allocation Structures
An Allocation structure comprises one or several settlement assignments. An assignment shows which costs (origin: cost element groups) are to be settled to which receiver type (e.g. cost center, order and so on)
You have 2 options:- You can settle to a settlement cost element or settle by cost element i.e. settle using the original cost element.
We will use settle by cost element.
Click on New Entries
Allocation stru :- Z8
A Ltd : Internal order settlement structure
Click Save
Select Z8 Internal order settlement structure
Double click on Assignments
Click on New Entries
Assignment :- 10 Settlement Primary cost Element
Click Save
Select 10 Settlement Primary cost Element
Double Click on Source
Give From Cost Element To Cost Element
Save
Click back arrow
Note:-The color has become green
Select: Settlement primary cost element
Double click on Settlement cost
Click New Entries
Select CTR Cost Center
By Cost Element Check
Save
4.2 Maintain Settlement Profile
IMG Controlling Internal Orders Actual Postings SettlementMaintain Settlement Profile
Here we define a range of control parameters for settlement.
Double Click on Maintain Settlement Profiles
Click on New Entries
Select Settlement not allowed
Assign the allocation structure Z9 created earlier in the settlement profile.
Click on Save.
Select Back Arrow
Double Click on Enter Settlement Profile in order types
Give Settlement Profile Z9100
Click on Save.
4.3 Maintain Number Ranges for Settlement Documents
IMG Controlling Internal Orders Actual Postings SettlementMaintain Number Ranges for Settlement Documents
You should define separate number range intervals for settlement documents for each controlling area.
Click Group  Maintain
Click Group Insert
Update the following:-
Give From Number 1000000000- To Number 1999999999
Click on + at the bottom left side.
Click 8100
Click on Arrow icon.
Select Settlement documents for A limited Check box
Click Element group button
Click SAVE
Assign Points
Zia

Help, new to Linux and need help installing 8i

I am new to Linux and some of this stuff..
Yet,I have gotten the JDK116_v5 installed and working on my box.
I have cut a cd for Oracle8i and need help..
I have also recopiled my kernal as well...
Does any one know where I can get help...
null

Al Pivonka (guest) wrote:
: I am new to Linux and some of this stuff..
: Yet,I have gotten the JDK116_v5 installed and working on
: my box.
: I have cut a cd for Oracle8i and need help..
: I have also recopiled my kernal as well...
: Does any one know where I can get help...
Try http://www.akadia.com/html/dod-frame.html for Redhat.
http://www.suse.de/~mha/oracle/ for SuSE
Also peruse these
http://www.akadia.com/html/dod-frame.html
http://jordan.fortwayne.com/oracle/
Colin.
null

Setting Up New FCP5 HD Bay -- Need Help

I'm setting up an HD edit bay for a friend, and I have a number of questions. Any help would be a godsend.
Basically, he's got a G5 with Final Cut Studio installed, a Motu audio interface, a Mackie Mixer, a Decklink Pro HD dual link, M-audio LX4 5.1 speakers, and a DVD/VHS recorder. He has one 250G internal capture drive, and one external 1TB firewire G-Raid. He's running a 23" and 20" Cinema Displays, and a Panasonic 32" HD LCD Flatscreen.
He wants to rent decks per project for capture and output.
My questions is this, how do we output to SD VHS/DVD or other formats for clients? Do we need a Switcher? Is it possible to do format conversion in Final Cut and output via Firewire instead of decklink to SD devices?
Also, is SDI (serial digital interface) cross-platform from SD to HD? Kramer Electonics has an interesting format converter that supports SDI, but will that change HD to SD? Here is a model number and link. FC-7402
http://www.kramerelectronics.com/indexes/item.asp?pic=71
Kramer also has a firewire format converter that looks interesting. FC-20
http://www.kramerelectronics.com/indexes/item.asp?pic=430
One of the Mac Vendors suggested the Blackmagic Multibridge Extreme, which sounds perfect, but costs $2000 - 3000.
I'm looking for a low cost alternative, if possible.
I really need help from someone experienced with this. I'm a freelance editor who cuts offline mostly on Avid for episodic TV, but my friend master HD out of his Mac edit suite. This is new territory for me.
Thanks in advance.

You should setup your local DNS to resolve only for the 'film.lab.' domain. Any requests that your local DNS will not be authoritative for should be forwarded to your district's DNS server. You should also set your local DNS to allow recursion only for clients on the 10.x.x.x subnet. The failure of clients configured to use your DNS for name resolution could be due to rules that have bee setup on your district's edge router to block outbound and inbound port 53 requests for all internal clients.
If you set your server and clients to use your district's DNS server as the secondary for your zone, you must make certain that any hostnames within your local zone are defined on your district's DNS to resolve to the private, 10.x.x.x, subnet that you will be running your systems on. If you don't -and your DNS goes down and there is no secondary defined on the clients that contains the zone info for your subnet- your clients won't be able to find any hosts. If you wish to run services that will be accessible from the Internet on your local server, this may require your network admins to make changes to routing to allow those request to be pass from the public network to the private one.
Also, if your district runs a central DHCP server you will need your district network admins to setup their DHCP server to return the correct client settings for your DNS and search domains for the clients within your subnet. If they do run a central DHCP server, do not attempt to set up a local one for your subnet. If you do, the probability that you will receive a very angry phone call from a not so happy fellow at your district is very high.

My D420 is not working on my new Mac Mini I need help

I have a new Canon Printer D420 . I love the machine works great
the price was great. It worked good on my old Imac for a few weeks then
I bought a new Mac Mini and now I can't get it to work. I reloaded my
solfware taht came with it..... need help
thanks
Ray Land

Hi Ray Land,
We can help narrow down the cause. What operating system are you using on your new Mac Mini?
If you are running the Mountain Lion OS, you can download the latest driver here. An important note is that the current print queue must be deleted before installing the new driver. This will ensure proper communication.
If this doesn't work or you need further assistance, please contact us here.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

New to color correction - need help on too bright shot

Need help to fix this shot! I've been messing around with color corrector 3 way and nothing seems to help. I'm new to color correction and would greatly appreciate any advice.
Thanks,
Jenny

When you see white pixels in an overexposed shot, it means that there's often no pixel data to work with.
While the best option is a reshoot (this time with proper monitoring), you may want to try the "Captain's Blowout Fixer" filter available here: http://pistolerapost.com/pluginz/index.html
It let's you looks to see which color channel has the most remaining pixel data (if any) and work with it to overcome production screw-ups like this. Make sure you watch the tutorial on how to properly use the filter.
-DH

New to Indesign and need help on layout

Hi there
I have a small invitaiton business and have recently started using Indesign (steep learning curve). I have designed a wedding suite for a bride and it is ready to go off to the printers. My problem is i have recently changed printers and these guys print on size SRA3 and charge for set up costs if I dont supply all my setup in this size.
I dont know how to do this! Is there a simple way i can take my one invitation and place it multiple times on a SRA3 setup without copying and pasting. Plus all my crop marks and bleeds need to line up.
ANy help would be really appreciated.
thanks
Nerissa

I really did not want to say more about this but your attitude is ....
Who are you that you think you know every printers setup and requirements, who are you to say that a person must not go to there prefered printer for work.
What the hell does a car got to do with printing, NOTHING. Keep on topic!
You say modern workflow, so your saying every print shop in every town in every country has exactly the same equipment as your printer has and whats needed to handle your unprofessional approach to laying out graphics, wake up will ya every print house in every town can be different your arrogance in assuming every print house can reproduce your improperly prepared graphics is just going to cause trouble.
Refering back to the original post. I did not see the name of the printer they where sending the job to, do you know them personally to insist that your way is the best way to reproduce the job. NO!
You do not know them yet you jumped on my suggestion and it was only a suggestion that could lead to an idea for getting the job done. You called it BS yet every working day at my work I follow that sort of work flow for a number of reason. No it is not modern Yes it does work everyday.
You thinking that your way is the only way is no help to anyone in here.
This forum is for everyone, if I take the time to suggest something so be it, it is not your job to judge if my suggestion is wrong.
Be a help not a hinderance and keep your arrogance outta the forum.
P Taz:
Bob's main problem is this modern workflow chip on his shoulder, not everyone has the latest and greatest hardware and software. Adobe is printing longer then I care to think back on, and they have many different ways of doing this job and many of these are still in use. Modern is all fine and dandy if you have it.
I am not happy with using obsolete processes but that is what I have to work with. I absorb a lot that is said in these forums not all I can use yet but its good to see the changes in technology. Everyone as a designer has to keep in mind the Printshop that is printing there work
I never came in here with the intention to revert people, I only suggested a way to get a job done even you do not know what equipment the printer has to reproduce the OP problem. How in gods name can a suggestion be wrong for this forum even you have fallen for bob's inability to realise there are still people out in the real world not using the most modern workflow equipment and these people need help.
It is no good you just saying update update update. The job needs doing with what they have, later when money permits or whatever then talk to them about modern workflows.
And lastly goes out my appology to the original poster, I am very sorry this has gone as far as it has.
Bob... Lighten up!

New User KIN twom needs help!

Hi guys, I recently purchased a Kin TWOM because i wanted a decent phone without having to pay for data plan. I have some questions that I need help answering/confirming because I searched online and it'll be nice to have all my answers here.
1. WIFI
Q: I understand that the kin two can go on wifi FOR FREE as long as you turn the 3G network off.
Would turing your phone to airplane mode be good enough to NOT use the 3G at all or do I need to go online and do a data block on the phone?
Would turning the data block off online, completely turn off the 3G network, so i guess incase of emergency, no use of 3G?
I can still receive text without 3G (text is not part of data- i think?)?
2. Games
Are there any games you can download from computer to the phone? I saw that someone posted mytouchgames.com as a site inwhich you can lay games on it or something. I want to play games and see if can imput by comp.
3. ZUNE
I never had a zune before and have no idea how it works. I believe this is free. I saw that all you need is to download a program and I can start putting my music from my computer to the phone and just play it like a mp3.
Can you use mp3 from the computer, put into zune and use it as a ringtone?
Ringtone on phonezoo..sending it to the phone would not cost anything? But i'm not sure where to save it to because i don't think i want it to be permenant. Can I send it to the zune program
Some people also mentioned sending by email..i don't really understand it. Are we sending it as an attachment? or a link??
4. Bluetooth
Can you transfer music/pictures/ect. from phone to phone via bluetooth? I would probably like to send pictures to my sister when I see her WITHOUT using text. If not, is the only way is to transfer pictures from phone to computer and post it online?
5. MISC
I heard that there was an issue regarding the phone being on silent and still ring, can someone clarify? like if its on vibrate, the alarm would still go off, but if people called, it'll be on vibrate?
THANK YOU for your time in answering these questions.

icekitsune714 wrote:
Hi guys, I recently purchased a Kin TWOM because i wanted a decent phone without having to pay for data plan. I have some questions that I need help answering/confirming because I searched online and it'll be nice to have all my answers here. Hi and welcome to the boards!
1. WIFI
Q: I understand that the kin two can go on wifi FOR FREE as long as you turn the 3G network off.
Would turing your phone to airplane mode be good enough to NOT use the 3G at all or do I need to go online and do a data block on the phone? Correct, wireless providers do not charge for Wi-Fi use. However, it's very difficult to tell on the Kin whether you're using Wi-Fi or 3G, so I do recommend a data block. As you stated, you can also put the phone in airplane mode, but that does shut off the radio, so you will not receive any calls or texts when you do this.
Would turning the data block off online, completely turn off the 3G network, so i guess incase of emergency, no use of 3G? Correct, you would have to go online to My Verizon or call customer service to enable data. If you think you'll occasionally use it while out, maybe you want the $10 data plan ... $1.99/MB adds up fast!
I can still receive text without 3G (text is not part of data- i think?)? Yes, you will still receive texts. You can even receive MMS (pic and vid messages), but the customer service rep has to set this up correctly on your account. Be very careful that the rep doesn't remove the data block to allow MMS -- you will think you're using Wi-Fi and the charges will really add up.
2. Games
Are there any games you can download from computer to the phone? I saw that someone posted mytouchgames.com as a site inwhich you can lay games on it or something. I want to play games and see if can imput by comp. No experience with this, sorry.
3. ZUNE
I never had a zune before and have no idea how it works. I believe this is free. I saw that all you need is to download a program and I can start putting my music from my computer to the phone and just play it like a mp3. Zune is great. It's free to use (unless you decide to purchase the Zune Pass, which is a music subscription for $15/month, plus you can keep 10 songs every month for your own collection). When Zune installs, there's a setting that syncs all the music and pics already on your computer. So when I installed Zune, all my music from Windows Media Player was there. You simply drag and drop to put on your Kin. You can also subscribe to podcasts through Zune. Plus the Kin does have an FM radio, which sounds good and shows current songs playing if the info is available.
Can you use mp3 from the computer, put into zune and use it as a ringtone? I don't think this worked for Kin users.
Ringtone on phonezoo..sending it to the phone would not cost anything? But i'm not sure where to save it to because i don't think i want it to be permenant. Can I send it to the zune program
Some people also mentioned sending by email..i don't really understand it. Are we sending it as an attachment? or a link??
4. Bluetooth
Can you transfer music/pictures/ect. from phone to phone via bluetooth? I would probably like to send pictures to my sister when I see her WITHOUT using text. If not, is the only way is to transfer pictures from phone to computer and post it online? I read that the Kin Bluetooth only works for headsets, not file transfer, but I'm not certain.
5. MISC
I heard that there was an issue regarding the phone being on silent and still ring, can someone clarify? like if its on vibrate, the alarm would still go off, but if people called, it'll be on vibrate? This is because the ringer switch does not lock. So if your phone is in your pocket, you can bump the switch and put it in another mode. So you think it'll ring and it's on silent, for example.
THANK YOU for your time in answering these questions.

New to Java and need help with error message!

I have just installed the oracle jdbc driver and am now getting the following error message when trying to use the jbdc driver instead of the jdbc:odbc wrap driver...
See com.borland.dx.dataset.DataSetException error code: BASE+47
com.borland.dx.dataset.DataSetException: Chain of 2 or more Exceptions occurred
     at com.borland.dx.dataset.DataSetException.a(Unknown Source)
     at com.borland.dx.dataset.DataSetException.throwExceptionChain(Unknown Source)
     at com.borland.dx.sql.dataset.q.a(Unknown Source)
     at com.borland.dx.sql.dataset.Database.openConnection(Unknown Source)
     at com.borland.dx.sql.dataset.Database.createPreparedStatement(Unknown Source)
     at com.borland.dx.sql.dataset.o.a(Unknown Source)
     at com.borland.dx.sql.dataset.o.d(Unknown Source)
     at com.borland.dx.sql.dataset.o.f(Unknown Source)
     at com.borland.dx.sql.dataset.QueryProvider.e(Unknown Source)
     at com.borland.dx.sql.dataset.JdbcProvider.provideData(Unknown Source)
     at com.borland.dx.dataset.StorageDataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.open(Unknown Source)
     at com.borland.dbswing.JdbTable.bindDataSet(JdbTable.java:2749)
     at com.borland.dbswing.JdbTable.setDataSet(JdbTable.java:819)
     at myframes.ClaimView.btnSQL_actionPerformed(ClaimView.java:279)
     at myframes.ClaimView_btnSQL_actionAdapter.actionPerformed(ClaimView.java:440)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
     at java.awt.Component.processMouseEvent(Component.java:5100)
     at java.awt.Component.processEvent(Component.java:4897)
     at java.awt.Container.processEvent(Container.java:1569)
     at java.awt.Component.dispatchEventImpl(Component.java:3615)
     at java.awt.Container.dispatchEventImpl(Container.java:1627)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
     at java.awt.Container.dispatchEventImpl(Container.java:1613)
     at java.awt.Window.dispatchEventImpl(Window.java:1606)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Chained exception:
javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:640)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
     at javax.naming.InitialContext.getURLOrDefaultInitCtx(InitialContext.java:280)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at com.borland.dx.sql.dataset.q.a(Unknown Source)
     at com.borland.dx.sql.dataset.Database.openConnection(Unknown Source)
     at com.borland.dx.sql.dataset.Database.createPreparedStatement(Unknown Source)
     at com.borland.dx.sql.dataset.o.a(Unknown Source)
     at com.borland.dx.sql.dataset.o.d(Unknown Source)
     at com.borland.dx.sql.dataset.o.f(Unknown Source)
     at com.borland.dx.sql.dataset.QueryProvider.e(Unknown Source)
     at com.borland.dx.sql.dataset.JdbcProvider.provideData(Unknown Source)
     at com.borland.dx.dataset.StorageDataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.open(Unknown Source)
     at com.borland.dbswing.JdbTable.bindDataSet(JdbTable.java:2749)
     at com.borland.dbswing.JdbTable.setDataSet(JdbTable.java:819)
     at myframes.ClaimView.btnSQL_actionPerformed(ClaimView.java:279)
     at myframes.ClaimView_btnSQL_actionAdapter.actionPerformed(ClaimView.java:440)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
     at java.awt.Component.processMouseEvent(Component.java:5100)
     at java.awt.Component.processEvent(Component.java:4897)
     at java.awt.Container.processEvent(Container.java:1569)
     at java.awt.Component.dispatchEventImpl(Component.java:3615)
     at java.awt.Container.dispatchEventImpl(Container.java:1627)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
     at java.awt.Container.dispatchEventImpl(Container.java:1613)
     at java.awt.Window.dispatchEventImpl(Window.java:1606)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Here is the code causeing the error;
void btnSQL_actionPerformed(ActionEvent e)
try
String GET_DATASET = txtSQL.getText().trim();
Display("Executing...");
try
MyDisplayTable.setDataSet(null);
catch (DataSetException ex)
Display("ERROR 1: " + ex.toString());
try
queryDataSet1.close();
catch (DataSetException ex)
Display("ERROR 2: " + ex.toString());
try
queryDataSet1.setQuery(new com.borland.dx.sql.dataset.QueryDescriptor(
database1, GET_DATASET, null, true, Load.ALL));
catch (DataSetException ex)
Display("ERROR 3: " + ex.toString());
try
if (!queryDataSet1.isOpen()) {
queryDataSet1.open();
catch (DataSetException ex) {
Display("ERROR 5: " + ex.toString());
try {
queryDataSet1.refresh();
catch (Exception ex) {
Display("ERROR 5.5: " + ex.toString());
try {
Display("setDataSet");
MyDisplayTable.setDataSet(queryDataSet1);
Display("DONE setDataSet");
catch (DataSetException ex) {
Display("ERROR 6: " + ex.toString());
Display("Query: ' " + GET_DATASET.trim() + " ' was executed successfully");
catch (Exception ex)
Display(ex.toString());
Please let me know if more information is required. I am completely at a loss as to what more I need to do to get this to work using the new driver.
Thank you all in advance,
Malcolm Diaz
Application Developer
[email protected]
PlanVista Solutions Inc.
419 E.Main St.
Middletown NY 10940
845-346-2692

this is more of a jdbc question rather than an internationalization. You might be able to get more help if you post it in java programming section.

Im new to this and need help with putting a password on my wireless

I've had my linksys router for a few years now and recently have been asked to secure it so no one else in the neighborhood can connect to it but me but Ive never known how and I cannot find the installation CD for it. I have a model number# WRT54G. I tried searchin the forums but couldn't seem to find one I could understand. If anyone could please offer me some help on how to simply put a password on it so just my computer and the others in the house can access the wifi thatd be great. Thanks

To set up wireless security, you must use a computer that is wired to the router.
Where to find the router settings: The router's login password is usually on one of the "Administration" pages. The other settings are all found in the "Wireless" or "Wireless Security" section of the router's setup pages, located at 192.168.1.1
First, give your router a unique SSID. Don't use "linksys".
Make sure "SSID Broadcast" is set to "enabled".
Next, leave the router at its default settings (except for the unique SSID), and then use your pc to connect wirelessly to the router. Test your wireless Internet connection and make sure it is working correctly. You must have a properly working wireless connection before setting up wireless security.
To implement wireless security, you need to do one step at a time, then verify that you can still connect your wireless computer to the router.
Next, encrypt your wireless system using the highest level of encryption that all of your wireless devices will support. Common encryption methods are:
WEP - poor (see note below)
WPA (sometimes called PSK, or WPA with TKIP) - good
WPA2 (sometimes called PSK2, or WPA with AES) - best
WPA and WPA2 sometimes come in versions of "personal" and "enterprise". Most home users should use "personal". Also, if you have a choice between AES and TKIP, and your wireless equipment is capable of both, choose AES. With any encryption method, you will need to supply a key (sometimes called a "password" ).
The wireless devices (computers, printers, etc.) that you have will need to be set up with the SSID, encryption method, and key that matches what you entered in the router.
Retest your system and verify that your wireless Internet connection is still working correctly.
And don't forget to give your router a new login password.
Picking Passwords (keys): You should never use a dictionary word as a password. If you use a dictionary word as a password, even WPA2 can be cracked in a few minutes. When you pick your login password and encryption key (or password or passphrase) you should use a random combination of capital letters, small letters, and numbers, but no spaces. A login password, should be 12 characters or more. WPA and WPA2 passwords should be at least 24 characters. Note: Your key, password, or passphrase must not have any spaces in it.
Most home users should have their routers set so that "remote management" of the router is disabled. If you must have this option enabled, then your login password must be increased to a minumum of 24 random characters.
One additional issue is that Windows XP requires a patch to run WPA2. The patch is located in SP3, so you will need SP3 to run WPA2.
Note:
WEP is no longer recommended. The FBI has demonstrated that WEP can be cracked in just a few minutes using software tools that are readily available over the Internet. Even a long random character password will not protect you with WEP. You should be using WPA or preferably WPA2 encryption.

New Laptop w Vista - Need help transfering Palm and other software to Vista

I got a new laptop that runs Vista. My Palm TX has been the Palm and all other software fine on my Windows XP desktop computer.
How do I move all my Palm info over to the laptop without starting a lot of problems.
Will I still be able to sync my Palm on both my desktop Windows XP and my Vista laptop?????
Can someone please give me a step by step guide for this procedure:
Thanks for the help and advoe
JoAnne
Post relates to: Tungsten T3

To sync on your new 32-bit desktop you will need to download the Vista-compatible Palm Desktop 6.2.
You will also need to install Documents To Go v.10 on the new desktop as well...should be fine with Vista. From what I've seen of Beyond Contacts, you will need to upgrade to 3.0083 to gain Vista support. I don't know if that's a paid upgrade or not.
If any of your other third-party apps also have a desktop component or install a conduit for synchronization, you'll need to check with each of them to verify compatibility with Vista and Palm Desktop 6.2.
When you connect to the new computer for the first time after you install Palm Desktop software, just select the TX's current Hotsync ID to sync with, and the data on the TX should automatically migrate into your new installation. But it's always best to be safe rather than sorry. Get a copy of NVBackup (google and download from any legit source such as www.palmgear.com ), and run a complete backup onto a SD card. That way, you'll be minutes away from a full Restore if anything does happen in the transition.
Lastly, if you plan to sync with your two computers, you will need to be careful and only use one of them for full 2-way synchronization, and use the other purely as a clone to hold a copy of the data on the handheld, using Handheld Overwrites Desktop conduit settings on that second computer. Otherwise data corruption is sure to result. This Palm Knowledgebase Article discusses how to Hotsync one device on two different desktops:
http://tinyurl.com/kq4c5
Good luck, let us know how it turns out.
Post relates to: None
Message Edited by smkranz on 01-21-2009 11:14 AM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Brand new at copying DVDs - need help.

Hope that I am in the right forum. I'm brand new at using DVD copying since I've only had this computer for about a week. I've had problems in copying my home video DVDs on DVD+R discs which were created on a Sony DVD recorder. These are obviously not copy protected. I tried making a copy for a friend but ran into problems, phoned Apple and followed their instructions for copying and burning -R discs but that didn't work for me. On my follow up call, they suggested that the problem may be either the +R disc (rather than -R) or the fact that the discs were not burned on a computer but rather on the recorder. They suggested the use of other software. So I searched the web andI downloaded something called Mac the Ripper and using the dialog box in that program, do have the contents of one disc on my hard drive as far as I know. But I don't know how to copy (burn) onto a blank disc either using this same program or something else. In other words, what are my next step by step instructions to burn what I hope I have on the hard drive onto a blank disc - I still have +R discs left so I'll likely be using them. Thanks for any help.

From all the helpful information posted here, I have found out that copying DVDs is not quite as straightforward as I had hoped it would be using my new computer. I would have to purchase software which isn't supplied on my iMac such as Toast or Popcorn to do the job as far as I have found out from a number of sources. Toast is a bit more costly than I want to spend for just this one task although Popcorn is more reasonable. I am beginning to think that for the few DVDs that I really need to copy for my friend, the easiest route is to use my DVD recorder, transfer the contents of the DVD to the hard drive on my recorder (yes, the recorder does have a 160 GB HD) and then burn a blank DVD from the recorder's hard drive which is what I have done dozens of times in the past. Of course, it takes 2 hours to transfer the video from a DVD (assuming it has 2 hours of video on it) to the hard drive and then only about 4 - 7 minutes to burn the video onto a blank DVD from the HD of the recorder. Using the computer, I had hoped to reduce the time it takes for that first 2 hour step with the recorder. I'm not even sure if Popcorn would significantly reduce the time for transferring the video from the DVD onto the computer. I'll have to evaluate whether or not the cost of something like Popcorn is really worthwhile for me. Thank goodness, copying audio CDs is much more straightforward on the computer. Thanks for all the help.

New MacBook user desperately needing help

I've had my macbook (late 2008/early 2009) just over a week and connected to the internet fine on setup. I have a belkin n router but i can only ever seem to connect to the internet in one room and even then it's temperamental and sometimes won't connect. On the Airport icon it says it's connected to the network but no web pages will load. I have an iPod touch, PS3 and a windows laptop that all connect fine all over the house. Really need a hand, cheers.

That's good to hear. WEP is often troublesome - at least in part because the "standard" was often implemented in different ways by different manufacturers.
Re: anti-virus... well that all depends. As far as I know - there are no OS X viruses (where a virus is defined as self-installing, self-replicating malicious software). However, there are some trojan horses (malicious software that you have to explicitly install, usually on the pretext of installing software for some a legitimate purpose).
So... if you download lots of "free" software or other material from the net... a virus checker can be useful.
But if you are download only well known open source/shareware/commercial software and avoid "free" movies / adult content... then you probably don't need a virus checker.
That said, if you share a network with lots of Windows PC's then a virus checker is a good idea (although OS X can't be infected, it is certainly capable of passing viruses on through emails or Microsoft Office documents).
Cheers,
Rodney

New E-Sourcing Implementation Need help

Similar Messages

Maybe you are looking for