New E17 install and Bling module buginess?

I just installed the e17-cvs packages per wiki last night-but I cannot get E to run with Bling module loaded...the DE will run fine with Bling, until I open a new window/app-whereat E17 freezes-and only a Crtl+alt+backspace will get me anything (back to entranced). This occurs something as simple as the Xterm console. as well as full Qt4 apps and Gtk apps.
In case it matters-this box also has KDEmod on the same Arch, Nvidia GTX260 with 180.22 drivers. E is at default 1st run config, minus load/unload Bling.
Any ideas on how to make E17 w/bling useable on my box? I've run E before, but not under arch-and remember some difficulty with Bling conflicting with another module which I had to unload-but I'm scratching my head as to what.
Last edited by Skripka (2009-03-03 14:49:37)

skottish wrote:This is a total guess. Do you have xcompmgr running? If so, bling doesn't use it; It has its own version built in.
I'll check when I get back from work.
For now, it seems like there is some conflict between Bling and Dropshadows...as I can get Bling to run fairly stable once I deactivate Dropshadows (I also deleted the .E folder in /home for good measure)...I say fairly, as I occassionally do get either a crash of E, or there is often a deal of lag in Bling focusing/defocusing the current window.
Last edited by Skripka (2009-03-03 16:47:36)

Similar Messages

My hard drive crashed on my macbook pro and I had a new one installed and they were unable to get my pictures off of it. Is there anyone who could help? I'm going to lose all my memories of my kids! I got my old hard drive

My hard drive crashed on my macbook pro so i had a new one installed and they couldn't get my pictures off. I dont want to lose all my memories! They gave me back my old hard drive. Is there anyone that could help me?

I think how you understand the value of having backups. All you can do is:
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.
You will need an external enclosure for the old drive so you can connect it to the computer in order to try the recovery software before you buy it. But if they don't work then you will need to send the drive to a recovery service such as Drive Savers.

I just recently had a new hardrive installed and now i cant transfer my data

I just recently had a new harddrive installed and I cant seem to start it up properly

What exacty happnes when you try to startup?
Wha installed the HD?
What model MacBook Pro?
It it has Internet Recovery then boot into Recovey
OS X: About OS X Recovery
There you can use disk utility and reinstall the OS. Otherwise y owill have to boot for an Install Disk
BTW, this is the Mac Pro Desktop forum

New Infinity install and Philips Smart TV

Any ideas on how to resolve my connection issue. I have a Philips smart TV which until I had Infinity and the new HH3 installed on Thurs(7th Feb.) connected without any issues with my previous supplier's BB (Sky). Tv is connected and finding net ok but cant/wont connect to Smart Tv. I've enabled Port clamping as advised in other posts but still no joy. Any other suggestions appreciated. I pretty sure its not a TV issue as It worked no problems pre Infinity and TV is as up to date as you can get,Software update etc.
Thanks
Solved!
Go to Solution.

Hi,
I have the same problem with a Philips 40pfl8605 and a home hub 3 (but not the infinity package). the tv connects to the router, either wirelessly or via ethernet, but will not load Net TV. I get an error message which says 'Philips server not found. Try again later).
Keith, I'm on my home network now but you're link wouldn't open a few minutes ago. I can't work out how to message you directly on this forum, but if you can send me the content of that link on the thread, i'd be grateful. I'm pretty sure this problem stems from the router as the Net TV has connected in the past, when I've had a netgear router. Philips have been useless and after running through standard checklists such as clearing the Net TV memory, reinstalling software (which is up-to-date) etc, simply advised to send the (3yr-old) tv for repair.
Looking forward to hearing from you.

I have a new HD installed and bought a new mac os x 10.6 don't have the admin password, after booting and pressing alt key a padlock shows up but don't have a password. what can i do

i just got a macbook pro harddrive wasn't good so got a new one in and bought mac os x 10.6 to install.
unfortunately after inserted the disc in the drive, and press the alt key, a padlock shows up requiring a password but a don't have the password. there is nothing on the harddrive running. is there anything you can help me with. thank you.
caboampong

caboampong wrote:
bought mac os x 10.6 to install.unfortunately after inserted the disc in the drive,.....
I'm confused
I took this to mean that your DID have an install disk.
By holding down the "C" key, you are booting to the install CD.
Alternatively, you can hold down the "option" key, to select which drive to which you want to boot.

My hard drive recently crashed and I had a new one installed and upgraded to Yosemite since then I have not been able to get on my banks website to do online banking. Any suggestions on how to get back on there?

My hard drive recently crashed and I had to have a new one installed, at the same time I upgraded to Yosemite since then I have not been able to get on my banks website to do any online banking. I just get a blank page after I log onto the bank. Any suggestions on how to fix this?

Using Safari? Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. Then try Safari/History/Show History and delete all history items. Quit/reopen Safari and test. You can also try try Safari/Clear History and Web Site Data. The down side is it clears all cookies.Doing this may cause some sites to no longer recognize your computer as one that has visited the web site.
Try another browser as a test.
Firefox

Trying to reistall Officejet Pro L7680. Get message newer version installed and the process stops.

I need to know the file I need to delete in order to stop getting a message that says I have a newer version installed when I try and reinstall my printer. I have deleted all HP software on my computer and I still get the message. Please help.

Hi there mikem3791,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system is this?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

TS1277 My computer has had new windows installed and now when I plug in my phone is does not recognize the device

My Computer has just had a new windows package installed and now my "Device is not recognized" when I plug it in?

Microsoft Office is a program you would need to reinstall again.
As for data backup if you baid 200.00 for a cruddy job for just picture backups and a reinstallation of Windows, thats pretty bad.
I would ask the technician where your data is. basically you want to ask if he backed up your User directory

Fresh Install and no modules after boot [SOLVED]

Hi,
Been with this problem for quite a while. I'm piss€d off
(Sorry about my english.. I'm Portuguese...)
I've installed this release
Current Release: 2013.01.04
Included Kernel: 3.6.11
As i stop using Arch on a daily basis, i decide to install it again on my laptop. (I'm still using slackware, though)
I followed the wiki procedures and when i reboot i've got no modules loaded.
The reason:
uname -a give me 3.2.29 and the modules installed are 3.7.4.1.
I don't know what to do more. I've done 2 fresh installs and the results are the same.
I've upgraded with pacman -Syu, i've done:
pacman -S udev
pacman -S mkinitcpio
mkinitcpio -p linux
pacman -S linux
once or twice and... nothing.
something is missing and i don't know what. I'm out of ideas.
Thx for the help,
EddY
Last edited by eddygrinder (2013-01-28 01:12:34)

Scimmia wrote:
Lilo isn't installing, then. It's loading the kernel from your Slackware partition when you're trying to boot Arch.
Post your lilo.conf and the output of lsblk if you need help.
Here it is:
# LILO configuration file
# generated by 'liloconfig'
# Start LILO global section
boot = /dev/sda
#compact # faster, but won't work on all systems.
# Boot BMP Image.
# Bitmap in BMP format: 640x480x8
bitmap = /boot/slack.bmp
# Menu colors (foreground, background, shadow, highlighted
# foreground, highlighted background, highlighted shadow):
bmp-colors = 255,0,255,0,255,0
# Location of the option table: location x, location y, number of
# columns, lines per column (max 15), "spill" (this is how many
# entries must be in the first column before the next begins to
# be used. We don't specify it here, as there's just one column.
bmp-table = 60,6,1,16
# Timer location x, timer location y, foreground color,
# background color, shadow color.
bmp-timer = 65,27,0,255
# Standard menu.
# Or, you can comment out the bitmap menu above and
# use a boot message with the standard menu:
#message = /boot/boot_message.txt
# Append any additional kernel parameters:
append=" vt.default_utf8=0"
prompt
timeout = 300
# Normal VGA console
vga = normal
# Ask for video mode at boot (time out to normal in 30s)
#vga = ask
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769
# ramdisk = 0 # paranoia setting
# End LILO global section
# Linux bootable partition config begins
# Linux bootable partition config begins
image = /boot/vmlinuz
root = /dev/sda5
label = Slack
read-only # Partitions should be mounted read-only for checking
# Linux bootable partition config ends
# Linux bootable partition config begins
image = /boot/vmlinuz (sym link)
root = /dev/sda7
initrd = /boot/initramfs (sym link)
label = Arch
read-only # Partitions should be mounted read-only for checking
# Linux bootable partition config ends
# Windows bootable partition config begins
other = /dev/sda2
label = 8
table = /dev/sda
# Windows bootable partition config ends
I forgot do post lsblk but is something like:
sda2 - windows
sda5 - Slack
sda6 - Swap
sda7 - Arch
sda9 - home
Last edited by eddygrinder (2013-01-25 20:45:48)

New SSD installed and Performance Problems

Greetings all!
I just reinstalled my workstation with a new Intel X25-V SATA solid-state drive 40GB on which I installed only Win7 and CS5 and, with my i7980x processor and 24GB of ram, I was expecting some super crazy performance (my Windows Performance Number is 7,7 out of 7,9 possible) and... my Premiere Pro is now rendering painfully slow... Everything else is fine in the computer...
Real time viewing of the video, when not rendered, is impossible or extremely pixelized (it was just fine before with my HDD).
Any help is welcome!!
Thanks,
Etienne

SSDs make great OS/program drives, but they can be pretty weak for CS5, especially at the price/generation point of Intel's X25-V series. Regarding why are SSDs poor for CS5, it is an issue with slow performance in writing.
Put everything on your HD except "media cache DB" (CS5 projects, media, media cache, output, etc.) and you should be fine. BTW, you have a strong CPU and lots of RAM, so your hardware would be much better balanced if you were to use a total of 4 7200 RPM SATA drives: 2 in RAID 0 for projects and media; 2 in RAID 0 for media cache and render outputs. Check out the "hardware" forum for LOTs of hardware discussion.
Regards,
Jim

Master Suite CS5 New computer install and suite won't update.

I just installed my CS5 Master Suite on my new laptop. No problem. Trying to update all the programs and I keep getting server error or the update just gets stuck and freezes.
What's going on? How do I fix this? I have already tried stopping it and updating on program at a time. Still get a failure to update.

Did you download the updates from Adobe's site at the link below?
Adobe - Dreamweaver Support Center : Updaters
Nancy O.

New KM2M install and no video?

I just installed a new retail KM2M Combo-L board in an Antec case with a retail 2100+ processor. I'm using 256MB of Crucial PC133. When I try to power up all the fans work, the keyboard seems to work but no video at all. I've hooked up two monitors to it and no video on either. The HP monitor will flash a message on the screen to check video cable if you turn it on with cable not connected to computer. When I turn this motherboard on the monitor regesters that the cable is hooked up but that the computer is not "on". When turning on power sometimes I get a beep sometimes I don't. Sometimes the reset button works, sometimes it doesn't. Is this likely memory, processor, bad motherboard, short circuit? I can figure out how to test different sticks of memory but how to I check for the other stuff? What memory is recommended for this board? I know MSI say Kingston but apparently there is some contoversy about that.

I haven't hear that controversy about Kingston but I can tell that many of the problems posted in this forum involves Crucial memory. They are considered almost crap. Also you could be having problems with the power source, but to know more about, please give us a harware complete list includding Amps. P.S. gives to 3.3v. 5v. and 12v. and its brand. 8)

TS1717 Error message appearsn 'This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes'. It tells me new version installed and then does nothing?

If I delete the current iTunes to reinstall latest version what happens to the music I have downloaded from my own cd collection, do I lose it as I haven't been able to back up my music?

Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now?

New gw2014 install and edir

I did a Fresh install GW2014 for testing - not integrated by default to eDir on OES11 server I installed it on!
Ok, so I tried setting up LDAP - eDir
my admin user is admin and my Tree is LM, Context is LM
so I have cn=admin,ou=lm,o=lm (also tried cn=admin,o=lm)
No to SSL & cert so port 389
Connection failed
What have missed ?

Originally Posted by dzanre
DZanre wrote:
> you can configure the system for SSL.
PS - here are some docs on how to export the trusted root cert for your use when
you are ready for SSL:
To export your Trusted Root Certificate for a Linux server with iManager, see
https://www.novell.com/support/kb/doc.php?id=7013142
Instructions for ConsoleOne can be found at
http://www.novell.com/coolsolutions/tip/19360.html
Danita
Novell Knowledge Partner
Are you a GroupWise Power Administrator? Join our site.
http://www.caledonia.net/register
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...
Thanks - I've done that after Massimo's reply but although Test is OK the users I've created in GW have not sync to eDir and when I try to associate an account I receive authentication error. (At LDAP setup no errors)
I created 2 users in eDir about 3 hours ago - these have not appeared in GW either.
I thought 10 mins to install GW and all other bits was brilliant !
This kills all the improvements made.
Help is NOT !
Should be almost automatic witb eDir - IMHO !
There is absolutely no way anyone is going to deploy with just GW database !
may be its easier with AD - I'll give that a try !

New ram installed and now have black screen then it shutsdown

ive installed an extra 2gb of ram on hp630 notebook and when i turn on it has a black screen then shuts down after 1 minute. i think maybe one of the slots dont work as the original 2gb ram that in it works in one slot but not the other . so when i put the 2gb ram in i get black screen then shut down but its the same it works in the bottom slot but not the top. any help would be a massive help.

Hi
Seems to be an issue with the Memory slot which need to replaced. In case if you unit is still cover by the warranty i would request you to call HP Technical support and get the System Board replaced.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

New E17 install and Bling module buginess?

Similar Messages

Maybe you are looking for