New e75 wont show incoming call details
hey guys, just as the title states, i have purchased a new e75 and when i recieve calls my phone only displays 'call', it does not display any incoming caller i.d such as the callers name and number. Anybody having the same problem? can anybody help me? do i need to take it back to the shop? i just bought the phone today everything else seems to be working fine. thanks.
Thanks cjlim.
But it was not the problem.
I had previously removed any duplicated contact, or duplicated entry within a contact.
But I found the cause of the problem.
The file contact.db was corrupted.
Here how I solve the problem.
I erased all my contacts, made a backup (with PC Suite), then restore the phone to the factory settings (with #7370#).
After that I restore the phone with PC Suite.
The contacts, I picked up a one month old copy I had with outlook express.
It solved the problem.
Not a simple task I think.
OVI people should issue a patch or something to save all customer out there.
Surely it was caused by ovi.
Thanks again.
Similar Messages
-
Laserjet cm1415 will not stop showing "Incoming Call"
I have the fax setup in manual mode and it will not stop showing "Incoming call" on the panel even thjough there is no call comming in. Other than that everything works well. Any body have any ideas on how to get it off of that so the printer can go into sleep mode?
ThanksThe "Incoming Call" message is shown whenever we see a ring signal on the line, regardless of the fax receive mode.
If this message is showing up when no fax is being sent, then it means that there is noise on the phone line. You can contact your phone company to discuss options in reducing the noise on your phone line.
If this message is showing up with no phone line plugged in, then the modem inside the printer is detecting noise. It is possible that the internal fax parameters have become corrupt. If that is the case, then you can perform a "Restore Defaults" in order to reset them. Note: doing this will erase all of your settings. You can print out a configuration report before doing this so you can reset them. A restore can be done at the control panel by pressing [Setup] on the main screen (the button with the wrench on it), then select "Service" and then "Restore Defaults."
This is based on my own experience with the product.
I am an HP Employee. -
My Nokia E65 wont show my caller id
Hi
I recently bought a Nokia E65 and i am noticing that whenever i call someone, my caller id does not show on their phone. I set my phone to show my caller id and it still doesnt work. Does anyone know how i can fix this problem?
ThankyouWhen during incoming calls only the number is visible but not the name of the person who is calling, it means that the contact details are saved in two places - on your SIM card and on your phone memory. To solve this issue, you have to select all the contacts from the SIM card, move them to the Contacts in the phone memory. Make sure as well that you don't have, for example Roger - xxxxx and Roger - yyy (meaning one name with different numbers). You won't have this problem with contacts which you add now to your address book though.
-
I can make calls and send texts on my new iPhone 5, but all incoming calls and texts are received by my old (non-Apple) phone.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
My phone doest ring with incoming calls, but it also doesnt show someone is calling. I only see it, when i get the txt of missed calls.
Further the phone is extremely slow with opening whats app, emails, photos, camera and it closets the programs while using it.
I have many people around me with iPhone having the same complaints, but nothing has changed yet.
Please Apple solve this quickly otherwise the iPhone i enjoyed so much will be remplaceren with a Samsungesme43 wrote:
... the phone is extremely slow with opening whats app, emails, photos, camera and it closets the programs while using it.
See this discussion...
https://discussions.apple.com/message/23731048#23731048 -
New Font wont show in Adobe reader.
My company is re-branding itself and part of that re-branding is having the new name in a new custom Font. But when we print our external reports to send to customers the new Font does not show. I tried adding the Font to the adobe reader Font folder but still nothing? I wish Adobe Reader would just get it's Fonts from C:Windows\Fonts\. What do I need to do?
Donnelly JamesSounds like you need to talk to the folks that build the application that you use to create the PDF's.
No one here will be able to tell you how to embed fonts in that application unless you get lucky and run in to someone else that uses it. Their support would be your best bet.
Razgreeez wrote:
The reports are being built in program called Digital Metaphors Report Builder. We can print to a printer, text file, PDF etc. When I preview the report and print it out at a printer the font is there but not in PDF. I don't have Adobe Acrobat installed.
I looked in the File/Properties/Font and the new Font isn't listed. Arial, Tahoma and Times New Roman.
How do I embed the Fonts? -
Show incoming Call thumbnail Picture on Full Scree...
I am using E61i, the small thumbnail is showing on screen when the some one call me, is it possible the thumbnail show in full screen to look good.
Solved!
Go to Solution.Check out apps called 'Skyecaller' or 'Full screen caller'.
I don't know if FS caller will be compatible though.
http://www.skyestream.com/Skyecaller.htm
http://www.symbianware.com/product.php?id=fscaller60&pl=n6600
Message Edited by grayburn on 28-Oct-2008 10:51 AM
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers -
Name does not show incoming calls, but only the number
Hi, i have a BB 9300 with OS6 brand wind italia. this is my problem:
-sometimes when my rubric contact call me i can't seeyour name, but only your telephone number. I noticed that is common when the phone is locked with password.
I called the support, but I have not receives assistance!
I also replaced the device, but the new one is equal.
Please help me!!!!
Sorry for my bad englishIt sounds as though you have content protection enabled on your address book. To disable this feature in OS6, search for "Encryption" within Options. Uncheck the "Include contacts" box.
-
Not show incoming caller's name
dear team
If anyone in my contact list calling me, it doesn’t display their name but just number. Look like that number never save in my contact list.
I hope what i have explained to you will be cleared for you to solve my problem.
Looking forward to hearing from you.
Regards,
zubierNever mind. It was part of the Voice control setting.
-
IPad wont show .jpg images correctly
My new iPad wont show .jpg images correctly. They all get a yellow/blue filter almost like a negative photo. This is in Safari, Maps,Youtube and every App using .jpg images. Gifs, and png, viewing video etc is fine. Also the home screen background/wallpaper gets this problem.
BUT saved .jpgs from Safari strangely enough look fine in Photos. (Thumbnails stil look bad though.)
I thought it had to be a software issue, but reseting my device with newest OS (3.2) is not helping.
Any others with the same problem?Thanks for your reply. I have not created any JPGs, or transfered them to the iPad. I just surf with Safari and all .jpg's are getting this strange colors. When starting Maps the satellite mode gets wrong colors. The background on the home screen are the ones that came with the iPad. Strange thing is that when restoring it with software reset, the background is ok. When choosing a new (even choosing the same one) they get wrong colors when going to the home screen. (They all look good when choosing)
It looks like the iPad is not doing the final steps on rendering the images. (And also have a short blink when being displayed) However as I said, all images look good when viewing fullscreen in the Photos App. Even the ones saved from Safari which looked bad in Safari. -
C5 - does not show any number of incoming calls
Dear all,
I've bought a brand new Nokia C5 (7 days ago).
Whenever I get a call from which number ever, the C5 does not show
any number or contact detail at all?
Does anyone from you know this phenomenon???
Thanks in advance.
Kind regards,
KaiHi,
I cannot see the connection between the memory and the fact that the C5 does not show any number of any incoming calls. Even if it is not one of my contacts, who is calling, I would expect to see at least the number of the person, who calls (assumed the number is broadcasted by the sender) me.
The C5 only displays 'Anruf', but no number or contact detail at all.
Kind regards,
Kai -
My phone sometimes wont show voice mail,sometimes wont ring just shows missed calls,and some text messages wont show received till next day. Can anyone help?
Settings > General > Reset > Reset Network Settings.
Try reseating or replacing the SIM card.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).
Has any of the above been tried? -
IPHONE 4S incoming calls go directly to voice mail. This is a brand new replacement phone. Prior phone didn't have this problem
Slide up from the bottom of your display to access the control panel.
Look for the button (should be at the top) that shows a crescent moon.
Tap that button. It should say "Do not Disturb: Off".
Then try it out and let us know if it worked. -
Unity Express - Incoming calls wont get voice mail
CUE works fine with telephones on my local network. Incoming and outgoing calls work fine.
However when I get an incoming call via SIP trunk the call will not get forwarded to unity express after 10 seconds. The line goes dead.
I searched for another post which suggested the following commands:
telephony-service
call-forward pattern .T
voice service voip
allow connections from h323 to sip
I've double checked them and there's still something wrong.
Here's my current configuration:
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
telephony-service
load 7910 P00403020214
load 7960-7940 P00305000301
max-ephones 24
max-dn 24
ip source-address 192.168.20.1 port 2000
auto assign 1 to 24
system message Comtek
voicemail 3000
max-conferences 8 gain -6
call-forward pattern .T
moh music-on-hold.au
time-webedit
transfer-system full-consult
transfer-pattern 2...
transfer-pattern 3...
directory last-name-first
directory entry 2 2001 name Phone Two 7912
directory entry 3 2000 name Phone One 7970
ephone-dn 1 dual-line
number 2000 secondary 441833000000
call-forward busy 3000
call-forward noan 3000 timeout 10
no huntstop
ephone 1
no multicast-moh
device-security-mode none
mac-address 0017.0EF0.3642
type 7970
button 1:1
So pros, any suggestions?
ThanksI made a new dial-peer to handle incoming calls as follows.
dial-peer voice 1000 voip
description Incoming SIP
translation-profile incoming SIPin
voice-class codec 1
session protocol sipv2
incoming called-number .T
dtmf-relay rtp-nte
no vad
The translation-profile puts the call through to my 2000 extension.
This is my "show call active voice brief" when an external incoming call is ringing through to my 2000 ephone-dn.
To me this seems to show the dial-peer "1000" matching and using the g711ulaw codec
Telephony call-legs: 1
SIP call-legs: 1
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 2
1715 : 552 596706500ms.1 +-1 pid:1000 Answer +441833696807 connecting
dur 00:00:00 tx:0/0 rx:0/0
IP 87.127.240.98:16188 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
long duration call detected:n long duration call duration:n/a timestamp:n/a
1715 : 553 596706510ms.1 +-1 pid:20001 Originate 2000 connecting
dur 00:00:00 tx:0/0 rx:0/0
Tele 50/0/1 (553) [50/0/1.0] tx:0/0/0ms None noise:0 acom:0 i/0:0/0 dBm
Telephony call-legs: 1
SIP call-legs: 1
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 2
This is the "show call active voice brief" for an external incoming call when the call is established.
Telephony call-legs: 1
SIP call-legs: 1
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 2
1731 : 569 597220040ms.1 +3730 pid:1000 Answer +441833696807 active
dur 00:00:02 tx:105/16800 rx:104/16640
IP 87.127.240.98:15162 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
long duration call detected:n long duration call duration:n/a timestamp:n/a
1731 : 570 597220060ms.1 +3700 pid:20001 Originate 2000 active
dur 00:00:02 tx:0/0 rx:105/16800
Tele 50/0/1 (570) [50/0/1.0] tx:16180/16180/0ms g711ulaw noise:0 acom:0 i/0:0/0 dBm
Telephony call-legs: 1
SIP call-legs: 1
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 2
Not too sure where to go from here. -
Bought a new phone and now we can not receive incoming calls
This week I bought a new Panasonic cordless handset with no answering machine to replace our AT&T desk phone. I set it all up and waited the 7 hours for it to charge. Checked for dial tone, ringer, and volume. Called the house # from my cell phone and the screen on the Panasonic never showed an incoming call - kicked into voice mail (provided by Verizon) after the preset 5 rings so I left a test message. Panasonic screen showed a "1 new voice mail message". I was able to dial the voice mail access phone # and listen to my test message. Disconnected the new handset and reconnected our old phone - worked just fine. Returned the Panasonic to the store where purchased and exchanged for another (same model). Sales assoc. said there may be a code needed from Verizon. Spent hours on the phone attempting to speak to a real person at the customer service # and decided none work there anymore - everything was automated! After "4 digit pin" frustrations I gave up!
So if you've read this far and can help I'd sure appreciate it! Line works fine, old phone works fine, checked ringer/volume on new phone. Only working phone jack in the house (used to have 2 but when we contracted with V last year they only changed over one - another frustration). And how can I find out when our contract is up?!?Your mostly talking to peers here. Better off using the
http://www22.verizon.com/support/residential/contact-us/index.htm
option which is on all the Verizon pages. Should always lead you to phone numbers (1-800-verizon) and often an online chat. Sometimes will show you and email option.
As far as peers helping we would need to know what type phone service and general area of the country. Obviously varies as I have had no trouble with panasonic, uniden and other phones at my two locations (NY and FL).
Maybe you are looking for
-
Is skype Premium and Business the same thing?
Is skype Premium and Business the same thing?
-
Can't start x after "pacman -Syu"
I'm in the middle of installing Arch and had just configured xorg.conf properly for x to function. I then updated the system using "pacman -Syu" and can no longer start x, xinit/startx only returns an error messege. Here's the log file and xorg.conf:
-
Hi Friends, I need to create customised query to see the query aveage run time and the user usage based on hour/day/week/month. I try to create in bi 7.0 but i was not able to find in the BI Content delivered queries and also when i try to create on
-
Histograms: luminosity or saturation?
-------------------------------------------------------------------------------- I've been learning Photoshop for quite a while, I've done lots of tutorials and read a few books, but I can't find the answer to this simple thing: In the histogram pale
-
Partial Submit type something for InputDate Component?
Hi, I am using Build JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660. I have an ADF table inside my page fragement. One of the column inside table is of InputDate type. Whenever I am clicking input date my complete page fragment gets initialised or ref