New effects problem on library loops

My Logic has been performing close to flawless since I've had it. An update installed today and a new problem has arisen that I can not find a way to fix. Whenever the project tempo is different than the loop tempo, for example, when a drum loop in the library reads 120 and I change the project tempo is 85, the loop preview plays at the correct tempo but has reverb and delay all over it which sounds awful. Any help would be greatly appreciated.

That is exactly the same problem I've been having on my iPod 20G.
1. I've just upgraded my PC with XP, including Service Packs and updates.
2. Installed the newest iTunes
3. Imported all music files over from scratch, (did not import old iTunes library).
4. Installed iPod Updater 2006-01-10 for my version of the iPod.
5. Installed the new version for the iPod.
6. Then used the restore feature to wipe the iPod clean and then plugged it into the power supply like instructed by the Updater.
7. Launched iTunes with the iPod not connected.
8. Then connected the iPod and created a name for the iPod.
The problem occurs when the draging created Playlists to the iPod. It starts transferring files and then stops anywhere from 50 to 70 songs into the process. When it freezes, the iPod's "Do Not Disconnect" icon stops flashing and I can hear the harddrive inside the iPod still spinning. If you press the reset combination on the iPod at just the right time, it will reset. From that point I have formatted the iPod and started from sratch three times but it keep freeze around the same number of files. Still happens with different playlists.
Any suggestions?

Similar Messages

How can I stop iTunes from duplicating and auto playing my Internet streams whenever I add new media to the library?

I have been a mac user for a good few years now and use iTunes regularly.
Since the recent updates to iTunes I have been experiencing an issue that is becoming extremely frustrating and annoying!
Whenever I add a new item to my library, iTunes starts to play the Internet streams that I have opened over the years and duplicates them in the library in a playlist called "Internet songs". While the library is updated I cannot stop the playback. I have a very large library and it takes some time for all of the organising etc to finish.
This was never an issue with previous versions of iTunes.
Has anyone else had this problem? I have searched but can't find any mention on the Internet.
I really don't want to listen to these tracks anymore!!!
Deleting from the library does not stop this issue from occurring either.
Many thanks
Matt

we could not complete your itune request An unknown error occurred (12002) pls solve my problam??

Updated to latest I-Tunes. Since then whenever I import a new cd to the library it won't get album artwork.How do I get the artwork. My I-Tunes is set to automatically download missing album artwork but it doesn't work.

Updated to latest I-Tunes. Since then whenever I import a new cd to the library it does not get the album artwork. Automatically download missing album artwork is enabled in Preferences but the art work still does not appear in my library?

I'm having the same problem as the OP, I can't find that file "profiles.ini"
can't re-install firefox, deleted all files related to Mozilla and Firefox, still locked out by missing Firefox profile
I posted on my own problem recently w/ no response (https://support.mozilla.org/en-US/search?a=1&asked_by=GPStyne&w=2),
so far all posts on this support page have been confusing and I've been unable to find any of the things they spoke of trying to change it.
at this point I'm begrudgingly running Safari hoping someone can help me fix this, can't believe i can't just delete all and reinstall like a normal program/app

[svn:fx-trunk] 10229: Fixes for some transform effects problems.

Revision: 10229
Author:   [email protected]
Date:     2009-09-14 08:43:43 -0700 (Mon, 14 Sep 2009)
Log Message:
Fixes for some transform effects problems.
- We were not animating the postLayout properties in some cases where we should have, effectively pinning the object in place. We now animate those properties whenever applyChangesPostLayout is true.
- A copy/paste error meant that we did not animate the scaleZ property in cases where we should have.
- A problem in the transform code means that using a null transform center is not the same as a transform center which uses the transformX/Y/Z properties of the target object. We now force the creation/use of a transform center in all cases to avoid that problem.
QE notes: This breaks about a dozen tests in the transform effects area, but I believe the new results are correct and the tests/bitmaps should be changed.
Doc notes: None
Bugs: sdk-23177
Reviewer: Hans
Tests run: checkintests, Mustella transform effects
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-23177
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/AnimateTransform.as

How do I save effects onto the source loop file

I have a ton of effects on a particular loop; it'd be nice to mix it all down so the source loop has all the processing already on it.
That way i can free up resources and use the post-processed loop in the future.
any ideas??

Not sure if you understood Hang's explanation so if you didn't, 'Sharing' the file is a digital mixdown - the same as rendering the file as an audio file. You can 'share' the file to the desktop and drag and drop back onto the Garageband timeline. Then 'add to loops library'.

After SharePoint 2010 MOSS SP2 was applied problem with library preview

Hi,
I have recently applied SharePoint 2010 MOSS SP2 from here
http://support.microsoft.com/kb/2687453/en-us
After I have installed that service pack, one of my custom made library workflow for a department would not work when they Upload a document. It works if they create new documents from library menu, but not if they Upload a new documents.
ULS Viewer gives following messages
MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/_layouts/Upload.aspx?List=%.......Hiding key filters and downgrading tree functionality to legacy ListViewWebPart(v3) level for this list.
MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/_layouts/UploadEx.aspx?List=%...... Hiding key filters and downgrading tree functionality to legacy ListViewWebPart(v3) level for this list.
Some but not all taxonomy values were found, this can lead to the catch all being incorrect. Use TaxonomyField.SetFieldValue to update taxonomy values.
Also, when I try to use Navigation in Site Settings, and if I want to add new navigation either link or folder, and if I use IE 8 or 9 (32 bit) in the pop up window Navigation Link - web dialog, there is no "OK" button.
Thank you

Hi Eric
Thank you for helping me.
I have already came accross this blog and it is now quite the same as my case.
My navigation works without problem.
Also, when I open the site in SP Designer, all views of my library show this library in XsltListViewWebPart.
But this Upload.aspx, is a Form, not a view, and it shows the list in ListFormWebPart.
Just to remind you, the workflow work fine if the use "New Document" menu from library ribbon. So, I assume something is wrong with Update form.
This other form UploadEx.aspx, I do not see in SharePoint Designer for this Library.
I am kind of suspicious that it maybe has something to do with
http://support.microsoft.com/kb/2872441/en-us
And am thinking of applying these
Thank you
Windows Server 2008 R2 for x64-based Systems Service Pack 1
Microsoft .NET Framework 4<sup>[1]</sup>
(2835393)
Remote Code Execution
Critical
2572078 in MS11-078
Windows Server 2008 R2 for x64-based Systems Service Pack 1
Microsoft .NET Framework 4<sup>[1]</sup>
(2840628)
Elevation of Privilege
Important
2656405 in MS12-034

How do I make Logic See New Path to Logic Library?

I have moved my logic loop library to a different drive from the one I originally installed it to. How can I make logic "see" the new location?
Thanks

Drag the loop folders from the finder onto the loop browse window to reindex your content - it will ask whether you want to move the loops to your library, or index them where they are.

My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

Hello there, Capricious13.
There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Creating a new roll in the library, impossible!

Help! I am having difficulties creating a new roll within my library. I have followed the directions in the help menu (i.e. clicking library, selecting the photos i want, file>create film roll) BUT when I go to the file menu, 'create film roll is not an option highlighted. Pleasssse help! Thank you thank you.

Has to be a glitch in iPhoto. First try running Disk Utility and repair disk permissions. Are you at the latest version, 6.0.2? If not update to that and try again. Lastly you might have to reinstall iPhoto from the source disks it came on. To do so you'll have to delete the current application and all files with "iPhoto" in the file name that reside in the HD/Library/Receipts folder. Then install iPhoto, apply the latest update and repair disk permissions.

I now have itunes for windows 8 on my laptop and I cannot transfer a new song from my library to a playlist on my iPad mini using IOS 8.1.3

I upgraded to iTunes for windows on my Windows 8.1 64 bit laptop. I have not done any iTunes manipulations for many months. I just purchased a new song. I now have IOS 8.1.3 on my iPad Mini and I tried to move the new song from my library from my purchased file to a playlist. I can no longer click and drag the song from anything to the playlist. In addition, when I sync my iPad to my laptop none of my music from the iPad shows up in iTunes on the computer. Why does Apple continuously mess around with the simple actions of the program. It is very disheartening to be treated like this as a long time customer. This has happened so many times that I am getting the feeling that they seem to enjoy screwing up the users ability to use the program

Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac". Write down what it says about "version"and report that here. Now continue to "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
Check system requirements:
Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
The main issue might be having too little RAM. Most computers run newer systems more smoothly with more RAM than Apple says is a "minimum" for running that system version
After installing 10.6.3 run the updater to 10.6.8, then upgrade iTunes.
Jan. 2014 post by Kappy on doing all this: https://discussions.apple.com/message/24599931
The new system should install on top of the old one. That said, things have been known to go wrong and it makes sense to do a backup before installing the new system. In fact you seem to care about your files and things so you need to always have a backup because one day you will wake up and you hard drive will be dead and everrything on it gone. Buy an external hard drive and start using Time Machine or something to back up. The other risk is when you install the new iTunes. It doesn't happen frequently given the millions of users but there are daily posts here from people who for some reason the installation wiped out their whole library. If you have a backup then there's nothing to worry about.
This is well within what many people can do at home. It's a matter of inserting an optical disc and clicking you way through menus.

I live in a home with two other people, and one housemate tried to sync up his content from iTunes and iCloud onto another housemate's new iPad. the iTunes library only contains my content. is there any way to retrieve the there person's iCloud?

i live in a home with two other people, and one housemate tried to sync up his content from iTunes and iCloud onto another housemate's new iPad. the iTunes library only contains my content. is there any way to retrieve the other person's iCloud? Can they go out of my account? Their content is saved on their iPads, but can another iCloud be on the same home computer?

The syncing of music is one way, computer to phone. See this helpful document from a fellow user. Credit goes to the author.
https://discussions.apple.com/docs/DOC-3141

I just got a new macbook pro (my other one stopped working). I am trying to sync the music on my iphone to my new mac's itunes library. I've clicked sync in iTunes but it doesnt work. how can i do this?

I just got a new macbook pro (my other one stopped working). I am trying to sync the music on my iphone to my new mac's itunes library. I've clicked sync in iTunes but it doesnt work. how can i do this? I don't want it to delete everything from my phone or old computer.

hstarkeyy wrote:
I don't want it to delete everything from my phone or old computer.
You don't need to delete anything from your phone or you old computer.
Copy the entire /Music/iTunes/ folder from old computer or backup to /Music/ on new computer.
If you cannot use the old computer or don't have a backup...
-> Recovering your iTunes library from your iPod or iOS device
Then immediately make a backup of your new computer.
Get an external drive and plug it in and use -> Time Machine

How to get existing library imported to new itunes install, old library was not backed up or exported

How to get existing library imported to new itunes install, old library was not backed up or exported. This occured due to Win 7 user profile was corrupt.

I know that in Mac OS X one can pick which library to use by holding down the option key while starting iTunes. What's the Windows equivalent?
Press the Shift key.
WIll the fact that the music is now on another physical drive make a difference
No.
I know the previous install is at least 7.0, but I have no idea about which point release.
Try checking the content of the iTunes Music Library.xml file.
Finally, what's the expected behaviour (or required procedure) with respect to reauthorization of this computer to use the same ITMS-purchased files?
You will be asked to reauthorize the computer.
(28446)

I bought all the new effects from retrica around Christmas time and I had to factory reset my phone and now their not there and say I have to purchase all of them again please tell me how I can get my purchases back

I bought all the new effects for Retrica and now they say I have to purchase them all again

Dr Traed-
There should be a program that came with the camera that can view the AVCHD videos. It may have the ability to save-as other formats.
One program that is good for converting some video formats to M4V or MP4 required by iPad, is HandBrake. <Download Handbrake> If you can save the videos to an intermediate format, HandBrake may be able to complete the comversion to MP4.
Fred

When I sync my iPad to download new pictures to my library, my existing library gets deleted. How can I stop this from happening?

When I sync my iPad to download new pictures to my library, my existing library gets deleted. How can I stop this from happening?

The way I sync mine is to have an 'master' folder on my computer, and underneath it I have separate folders for the photos that I want to sync to the iPad - I then select the master folder in iTunes and the folders underneath it are synced to the iPad, each getting their own album.
There is some info on syncing folders on this page http://support.apple.com/kb/HT4236

New effects problem on library loops

Similar Messages

Maybe you are looking for