New Elements 12 does not open Aperture files

Hi,
I just installed 12 over 10 on a Mac Pro running 10.9.4 and Aperture 3.5.1 which previously opened files via contextual external editor option successfully. Now 12 opens but no image appears. I've tried both Raw and Jpegs.
Images from the desktop open just fine.
Any help would be appreciated.
Paul

When you set the External Photo Editor in Aperture, did you point to the Adobe Photoshop Elements Editor.app
inside the Support Files located in
/Applications/Adobe Photoshop Elements 12/Support Files

Similar Messages

When I click on the tab with a + on it, located next to the active tab a new page does not open. If I click on "New Tab" in the File menu a new tab does not ope

When I click on the tab with a + on it, located next to the active tab a new page does not open. If I click on "New Tab" in the File menu a new tab does not open.

Hi jcatx2013, we don't really have enough information on your system to make specific suggestions...
Could you test in Firefox's Safe Mode? That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?

When I click on the new tab button, a new tab does not open or when I go to file new tab a new tab will not open either.

When I click on the new tab button, a new tab does not open or when I go to file new tab a new tab will not open either.

Un-install the '''''Ask Toolbar''''' until Ask fixes the problem caused by their toolbar.
*http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on

When I click on 'open a new tab' or if I select 'new tab' from the file menu a new tab does not open. It used to.

When I click on the tab to 'open a new tab' or when I select 'new tab' from the file menu then a new tab does not open. It used to.

This has recently been answered below - Ask toolbar issue - this was the problem

I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?

I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?

Familiarize yourself with these tables
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Camera Raw-compatible Adobe applications
The E-M1 was first supported by Camera Raw 8.3 which is only compatible with CS6 and CC. It is not compatible with CS5 or lower and never will be.
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all the Raw E-M1 files to DNGs then edit the DNGs in CS5
Camera raw, DNG | Adobe Photoshop CC

Elements does not recognise prel file

I saved a project to DVD (photos with background music) Elements does not recognise "prel" file when trying to reload project. How do i open file in Premiere Elements 10

Chris (Herbie53)
There was no Premiere Elements 5 and 6. The version numbers went 1, 2, 3, 4, 7, 8, 9, 10, 11, 12 (latest) So you probably use Premiere Elements 4 or maybe 7 on probably Windows 32 bit XP or Vista.
Case 1. (Here we assume that you have the project.prel file (project) saved to a DVD disc as data disc.)
Even if you had saved that older Premiere Elements project file (project.prel) along with copies of the media that went into it, it is still questionable whether that old project.prel could be opened in Premiere Elements 12. But, assuming that the media was still connected to it (which it probably is not), you could try by right clicking the project.prel file and selecting Open With Premiere Elements 12. Have you gone that route, and the project would not open or you were greeted by "Where is the file...?" messages.
Case 2. (Here we assume that, when you were using the the older program, you took the project Timeline to DVD-VIDEO on DVD disc...this is not the project.prel file, but an export of it.)
In this situation, if you put your DVD disc in the burner tray and explored it, you would see two folders, one named OpenDVD and another named VIDEO_TS. This is your best case scenario. If this is the case.....
a. Put your DVD disc in the burner tray.
b. Open Premiere Elements 12 Expert workspace. Go to File Menu/New/Project and Change Settings.
In Change Settings, set the project preset for either NTSC DV Standard or NTSC DV Widescreen. For now, we will assume NTSC DV Standard. Then, before you exit that area, in the last dialog that you see (new project dialog), make sure you have a check mark next to "Force Selected Project Setting on This Project".
c. Next, back in the Premiere Elements 12 Expert workspace, use Add Media/DVD Camera or Computer Drive/Video Importer where you will select video files from the VIDEO_TS Folder to bring into the Premiere Elements 12 project. You will have to redo the menu in 12. The video files that you want from the VIDEO_TS Folder typically start with VTS_01_1.VOB and continue in series which can be detailed later.
Goal right now is to sort through the details so that we are in sync on what you have in order to enable us to be confident about the troubleshooting strategy.
We will be watching for your comments and results.
Thanks.
ATR
Add On.....The classical recommendation has always been to complete a project in the program in which it was created. But let us see what can be done here.

PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?

PS Elements 10 preinstalled on my new computer with Windows 8. It worked fine for a week, now opens once, then won't open again, or doesn't open at all. Adobe gives no support to fix this (they told me to research the answer on their site), yet their info says PS 10 and Windows 8 are compatible. Automatic troubleshooter gives non-compatibility message. Can this be fixed? Have spent many hours trying to figure this out. Uninstalled and reinstalled. Nothing works so far.

Thank you for your help. I tried ctrl-alt-shift, and it worked a few times, but not every time. After trying your suggested fix, here's what I've since found that works - so far - today.Open Task ManagerClose PS Elements 10Close Task ManagerLaunch PS Elements 10 Please keep in mind that I was closing the program the usual way (from the program) all along. I used an older version of PS Elements for years on my old computer (Windows XP), and never had a problem launching or closing the software. This problem came about on a new computer with PS Elements 10 and Windows 8. No other versions of PS Elements were installed on the new computer, nor were any settings brought over from the old computer. Again, thanks for your input. Will keep your suggestion in mind for any future troubles with Adobe products.
A Digiovanni
Date: Fri, 11 Jan 2013 00:51:43 -0700
From: [email protected]
To: [email protected]
Subject: PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?
    Re: PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?
    created by c.pfaffenbichler in Photoshop for Beginners - View the full discussion
Good day! You may want to post on the Photoshop Elements Forum. http://forums.adobe.com/community/photoshop_elements In general trashing the Preferences (by keeping command-alt-shift/ctrl-alt-shift pressed while starting the application) can be helpful with malfunctions in many Adobe applications. Regards, Pfaffenbichler
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4985553#4985553
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4985553#4985553
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4985553#4985553. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop for Beginners by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Photoshop elements does not open, says "gathering user info...."

photoshop elements does not open, says "gathering user info...."

Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 9\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.
Solution 5: Try with admin account or right click and select run as admin. or try directly from .exe
For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743
Thanks,
Garry

Premiere Pro CC does not open MOD files correctly

Hi,
I just started using the Adobe Creative Cloud as a trial, in particular the Premiere Pro CC software, since it might be relevant, I am working on a mac (completely updated as of yesterday).
I have a JVC GZ-MG505 camcorder. This device saves the video files on an internal HDD in a file format called MOD. From what I have been able to see when searching on the web, this should be nothing more than a MPEG-2 file.
So, I tried importing some video files into Premiere Pro and to my surprise, I noticed that a whole strip on the right hand side of the image is missing. The original is recorded in a widescreen (16:9) format with 720x576 pixels and Premiere Pro gives me a file with 540x576 pixels. I have tried using the Interpret Footage to change this, but it doesn't let me change the number of pixels. I also tried opening the files in Adobe Media Encoder and I have exactly the same results as in Premiere Pro. However, opening the files in VLC or mPlayer they come out exactly as expected with all the pixels there. Has anyone come accross this problem before or can anyone help me with solving this?
I could try reencoding the files with VLC, but the output file is much smaller than the input file, so I am afraid I am loosing some definition.
So, just to restate my problem, the adobe products open my MOD files without complaining, but for some reason they loose a strip 180 pixels wide on the right hand side of the image.
Cheers

Premiere Pro CC does not open MOD files correctly
That is correct: there is a bug in CC. In CS6 they work correctly.
Please file a bug report.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
http://forums.adobe.com/message/5658455#5658455
search for mod files and you will find one or two other threads.

QT does not open AVI file

hello,
I have installed Perian but with Mountain Lion QT does not open AVI file (no audio and no video)
do you have any suggestion?

I am using QT pre-installed in Mountain (should be X)
QT X can only play files using codecs it is programmed to expect to be used in the loaded file container/with the loaded file's stated extension. For example, QT X will not play a "muxed" MPEG-2/AC3 file with an MOV or VOB file extension but will usually play the file if the extension is changed to TS, MPG, or MPEG. On the other hand, the QT 7 Player tends to look at the internal header information and select a codec based on what the file says it needs for the actual playback. Thus, the QT 7 Player may frequently play files that the QT X Player does not play.
Besides supporting the the AVI file container, your QT system must also be configured to support the actual audio and video codecs contained in the AVI file and not have a "conflict" problem. For instance, Motion JPEG support for QT was dropped with the release of Lion. AVI files containing MJPEG video thay plays correctly under Snow Leopard will no longer play under Lion or Mountain Lion with additional support. In this case, Perian still provides such support. It also still provides support for DIVX, XVID, 3IVX, and similar third-party codecs commonly found in AVI containers. However, Perian support for such files can become conflicted if you have also installed the actual third-party codecs along with Perian and the different codecs fight over which is to be used for playback. This is why it is important to know the actual codecs used to create files using generic file containers like AVI and MOV and the codec components actually installed on your system, as well as, their potential for creating conflicts.
As to the actual playback of files, there are basically only three options (as indicated by the URL provided above:
1) You can conform the file and/or your system codec component configuration to play your files using a QT player app if possible,
2) You can use an alternative media player app the contains "native" support for the file containera and/or codecs used to create the files, or
3) You can convert the file to a compression format and file container that that is already natively supported by QT-based applications.
Since do not seem to know or are unwilling to identify the specific codecs causing a problem here, the only workflows left to you would be to try playing the file in an alternative media player which contains its own built-in codec support (e.g., VLC) or convert the files to something your current QT system configuration can handle (e.g., use a converter with built-in codec support like HandBrake).

PS CC does not open psdx-files

Hallo, PS CC does not open psdx-files, although I installed the Touchapp-Plugin. In PS CS6 there were no problems.

Did you install the optional plugin in Photoshop CC?
It won't be automatically copied from CS6.

Apercu does not open pdf files

apercu does not open pdf files and crashes

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

Illustrator 6 does not open ai-files

Hello,
coming back to work monday morning Illustrator suddenly does not open ai-files (I worked with friday), which is a problem for me to say the least.
All software is updated, I think I made an update friday actually.
I get a dialogue box simply saying "An unknown error ocurred"
Help?
I use an iMac with OSX 10.8.3 and files are stored on a server, don't know the type. (Would not open files from desktop either.)
Eivind

Ookaaay, after a couple of restarts it works again.
Weird.
E.

A new window does not open when I click on the new tab "plus" sign. How do I fix this?

A new window does not open when I click on the new tab "plus" sign. How do I fix this?

Try uninstalling the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.

CS5: double-click on file does not open the file

If Photoshop is closed, double-click on a file will always successfully launch Photoshop and open the picture.
If Photoshop is running, double-clicking on a file will activate Photoshop, but very often the file does not open. It works from time to time though, and that seems to be on a random basis.
Opening a file through the Open command will always work.
I am working with 10.6.3 on a loaded Mac Pro.
Did anybody experience this difficulty? Any help would be appreciated, before I take more drastic measures like reinstalling the software of worse than that. I've already done the usual maintenance operations.

Marian Driscoll wrote:
Caustic waltz, while brief, may have hit the nail on the head. If you do not want to continue this thread, you can search the forum for existing posts about Snow Leopard and file-program association confusion. Snow Leopard changed some things and that might be your issue.
More simply, do your image files have extensions? (.PSD, .JPG, etc...)
Hello Marian:
While browsing through my Adobe account, I saw that you took the time to leave a comment two days ago. While it did not solve my problem, I will mark your comment as "helpful" for several reasons. It could have been a cause. And I will add politeness, courtesy and language precision. I'm an old guy and I quite value those elements.
True, Snow Leopard changed changed the way files are associated to applications. Thank God! Here in our small office, we do a lot of cross-platform transfers and finally it works seamlessly. A good description of the new file identification system can be found here.
Now, here are the reasons why Snow Leopard cannot be put at fault in my case:
• If Photoshop CS5 is not launched, double-clicking on any psd, tiff or jpeg file will launch it and open properly.
• If Photoshop CS5 is already running, double-clicking on any psd, tiff, or jpeg file will activate Photoshop CS5 but will not open.
This points at either a bug or damaged Photoshop CS5, or maybe a damaged OS. Don't forget that out of maybe a hundred apps, this is the first time I meet with that problem. Of course, the easier course, but by no means guaranteed to work, is to presume that Photoshop CS5 is damaged or that its installation did not work properly. So I did the following things:
• I deactivated Photoshop CS5 and uninstalled it.
• I ditched all remaining files related to CS5, CS4, CS3, CS2, CS... yes I know, but then you know as well as I do0 that getting really rid of Photoshop is a daunting task. It took me almost two hours, but I am reasonably sure that the cleaning job was complete.
• I reinstalled Photoshop CS5.
Now everything works just fine at least for the time being. Time will tell, of course, but I think that the problem is solved.
Regards

New Elements 12 does not open Aperture files

Similar Messages

Maybe you are looking for