New email server batch reports no longer email

We have a new email server. I've checked all of the places in prod where I found on the forums that were places the mail server should have been set and have found nothing in prod. I searched files in unix and found only one file, WorkflowEngine.properties. I don't understand why it won't work. I tried to check the oracle tables but found nothing and the core windows server had no search results. I was searching for the old server name so I could replace it with the new server. Any other suggestions?
Thanks!

Hello piyushsin
Welcome to BlackBerry Support Forums
If you have a invalid email address as your BlackBerry ID username then reset the password will not work , Only solution is to do a backup of your device for help refer to this Article : How To Backup Your BlackBerry . then follow this Knowledge Base :
KB26694 : How to change the BlackBerry ID on a BlackBerry PlayBook tablet or BlackBerry smartphone.
In addition please read this KB which might help while creating a new BlackBerry ID :
KB24062 How to create a BlackBerry ID
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

Any advice as to why I'm getting Email Server Timeouts for my 2 email accounts (ports 993 & 110)?

Email Server Timeouts for my two email accounts:
For the time periods April 12-21, 2012 and April 27-present, 2012 I have been unable to access my email account at ***** through the pop server. The server returns them message "The connection to the server “*****” on port 110 timed out."
I have also had the same problem accessing my gmail account via IMAP, receiving the following message: "The connection to the server “imap.gmail.com” on port 993 timed out."
I used the Connection Doctor program connected to Apple Mail and received the following information:
Mail was able to connect to the internet.
Gmail: Could not connect to this Gmail IMAP server. Check your network connection and that you entered the correct information in the Account preferences. Also verify that the server supports SSL. If it does not, deselect the "Use SSL" checkbox in the Advanced tab of Account preferences.
BayanMail: Could not connect to this POP server. Check your network connection and that you entered the correct information in the Account preferences.
SMTP smtp.gmail.com:*****@gmail.com Connection and login to server succeeded.
*****Mail SMTP server: Connection to server succeeded; login not required.
Can you help me with this problem?
I am running OS 10.6.8
Mail 4.5

The Motorola Droid Razr has a camera that sets up the shot to take a quality picture so its not in an instant. My wife also doesn't like that feature but I believe in the settings you can disable some of those functions. You have to read the owners manual for optimal settings.
Now email sent from the native app that came with the phone is totally useless. If you have a email service like Gmail or Yahoo Mail or Outlook Email go to the google play store and use the stand alone app. I can tell you that when we email photos the best email app is GMail or Microsoft Outlook Mail.
I take a picture and then select Gmail and it attaches and sends with great speed and Outlook works this way also since the attachment size is greater than other email programs. Your local isp or even exchange server will not send such large attachments
And I agree those apps preloaded should be able to be removed. If I buy my phone I should say what I want on it. But alas unless you do some other methods you can find on the web those dumb apps will remain.
Good Luck

Using nsMail email server, works fine in ns email tool, as of yesterday TBird 31.3.0 can not send or receive email. Have verified all setting for IMAP/SMTP OK.

Will not retrieve incoming emails. When I try to send one, error message appears: "Sending of message failed.
The message could not be sent using SMTP server smtp.ullisart.com for an unknown reason. Please verify that your SMTP server settings are correct and try again, or contact your network administrator." I have checked all IMAP/SMTP settings and they are fine. I can receive and send emails to the same address via the email server provider's email tool. Using nsMail, WIndows8, Firefox, latest version of TBird. All worked fine two days OK and have made no known changes to computer installation since.

ExchangeITPro,
Thank you for your reply.
>what SP are you at?
As noted in the first paragraph: "We have an Exchange 2010 server, running under Windows 2008R2. Both
the server and Exchange are current for Windows and Exchange updates. Exchange is on SP3 installed about a month ago with no errors reported in the event logs."
>try restarting the transport services.
Done previously as well as the entire server. No change.

I turned my email server off so that my emails wouldn't come to my Iphone while I was communicating abroad. When I turned it on again it will not receive emails says check you have entered the correct details. I haven't altered the details

I turned my email off on my I phone while I was receiving emails from abroad. When I turned it back on I get the message my server is not responding verify you have entered your email correct account info in mail settings, but I haven't altered my mail settings.?
How do I put this right, I tried connecting to icloud but had to turn the mail off in that it kept throwing up all my past emails.

Is that a new iPhone? Bring it in to Apple for a replacement.
But do this first:
hold the Home Button and the Power Button at the same time, keep holding, ignore everything on the screen, keep holding until you see the white Apple logo appear, then let go and let it start up.
It should charge both when on and off, unless you connect throug a hub and there are current eaters also on the hub: connect directly to the usb port.

I changed email servers but mail is attempting to be sent from deleted email server

We have a new email server so I deleted the email account associated with the old server and then added a new server. When I try to send an email, it is finding the old SMTP server and attempts to send using that (which of course fails since I no longer have an account there. I can't find any vestage or reference to my old email server anywhere on my iPhone but it is still finding it. Help, please?

Hi Nick,
From your description, I would like to clarify the following thing:
A user with Full Access permission can’t send email from the shared mailbox unless they also have Send As or Send on Behalf permission. Please grant your IT mailbox send as permission or send on behalf permission to check the result.
For your reference:
Shared mailboxes in Exchange Online
https://technet.microsoft.com/en-us/library/jj966275%28v=exchg.150%29.aspx?f=255&MSPPError=-2147217396
Hope this can be helpful to you.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Amy Wang
TechNet Community Support

Crystal Report 9 performance issue wehn we move old DB to new DB server

We are using Crystal Reports 9 version, recently we move to new database server and reports data source are pointing to Old database server and old database server is no longer in the network.
, Now we have issue with the performance, if the we call the reports from web application, it is talking long to retrieve the report at least 1 min.. , if we manually update the report data source pointing to new server and the reports are pulling in 1 second, Is there any easy solution to update all the report pointing to new server, we have 3000 reports, we can not use manual process, it will take long time and it is also issue with the future if we change the server.
Thanks!
Ram

The 1 minute timeout is due to ODBC driver trying to connect, it's the default timeout you are seeing. There is not tool Cr has to migrate/update database connection info. You can develop your own though or search the web for a third party tool, I'm sure there are lots out there.

Crystal Report 9 slow down when we move old DB to new DB server

We are using Crystal Reports 9 version, recently we move to new database server and reports data source are pointing to Old database server and old database server is no longer in the network.
Now we have issue with the performance when we call the reports from web application, it is talking long time to retrieve the simple report data(e.g. 1 min.). , if we manually update the report data source pointing to new server and the reports are pulling data very quickly.(e.g. 1 second for the same report) Is there any easy solution to bulk update all the reports datasource pointing to new server, we have 1000 reports, we can not use manual process, it will take long time and it is also issue with the future if we change the server.
Thanks for your help!
Ram
Edited by: ram vaishnapu on Aug 8, 2008 8:09 PM
Edited by: ram vaishnapu on Aug 8, 2008 8:12 PM

The 1 minute timeout is due to ODBC driver trying to connect, it's the default timeout you are seeing. There is not tool Cr has to migrate/update database connection info. You can develop your own though or search the web for a third party tool, I'm sure there are lots out there.

Ios7.1.2 email server authentication error

We have a problem sending email using iMail client on a) iPad (ios7.1.2(11D257) and b) iMac (Auto updating Mavericks OS10). However, we can send email from iPad (ios7.1.1 (11D201). All three devices can receive email.
All machines use the same email account and servers. All are using the same email client. All have been working effectively for past 4 years - the problem started about 1 month ago.
Have spent "hours" with email service provider to troubleshoot the problem. Here is a list of the steps we have taken:
1) checked email servers, confirming that email accounts can both send and receive email. This included testing via a webmail client, and from a Microsoft Outlook client. In both cases the tests confirmed that email can be received AND sent via the email server.
2) setup alternate email servers, on different ports, on iPad - can always receive email but cannot send. The error message that is received is "username or password for 'mail.iinet.net.au' is incorrect"
3) deleted email accounts and rest device to wipe it clean, then started from scratch - can establish the email account, can receive email, but still get the same error message when trying to send email "username of password for 'mail.iinet.net.au' is incorrect"
4) tried alternative email client (CloudMagic, Evomail, Canonball) - not possible to connect to the email account, typical error is "unable to verify your account information"
5) tried to setup account on iPhone across mobile phone network to isolate whether problem was local WiFi - same result
The only thing that has shone any light on this was when we identified the outgoing mail server as "mailout.comhem,se" with no authentication. With this setting email would send. This could suggest a problem with the WiFi network, but it has been working perfectly well up till now, and on other WiFi networks. It also does not explain the problem with iMac from home which is directly connected to an ADSL service provided by our email service provider (no intermediary in play at all). This also means that for every new WiFi network that I use (I travel a lot) I will need to find the details of an intermediate outgoing mail server for the specific WiFi provider. It is not clear why routing through an intermediary email server overcomes the authentication error at the destination email server, unless there is some more fundamental problem at play.
The authentication error has been isolated to somewhere between the device and the server - could there be some ios7.1.2 issue at play that is causing the authentication to fail, but not when directed through an intermediary mail server?
This problem is deeply frustrating, and any help would be greatly appreciated

I haven't ran across this, but I do see that there is no SQL Instance Name in your screenshot. Try putting SQLTMS in there and then click next and see what happens. Or if you know the name of your TMS database instance, put that in there.

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

HT204053 I have set up a new Icloud ID using a new email address on my I mac however my Iphone Icloud ID is still using an old email address that is no longer in use. How do I change my ICloud ID on my Iphone to that on my IMac computer. I only want 1

How do I change my Icloud ID on my Iphone to match my ICloud ID on my IMac computer? My phone has an old email address that is no longer in use. I have a new email address that I have used as my ICloud ID ( Apple ID ) on my IMac. I want to be able to send photos from my Imac to my Icloud account and see view them with my Iphone. Can you help me ?? Thanks

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.
When you do this, you may find that the password for your old ID isn't accepted. If this happens, and if your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iPhone when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

My original Apple ID is associated with an email address that I no longer have access to. How do I reset the system to recognize my new email address as my primary point of contact and erase the other one?

My original Apple ID is associated with an email address that I no longer have access to. How do I reset the system to recognize my new email address as my primary point of contact and erase the other one?

If when you go to icloud.com and sign in with your current iCloud ID you see all your iCloud data there, you can safely sign out of the iCloud account on your Mac and choose Delete at all the prompts, then sign back in with the current ID. This only deletes the data from your Mac, not from iCloud. Your iCloud data will reappear on your Mac when you sign back in after a brief delay as it redownloads. If you have automatically imported your photo stream photos to your iPhoto library you won't lose them either (if you haven't, save them to your library first).
Again, only do this if when you go to icloud.com with your current ID you see your iCloud data there.

I want to play music bought from itunes on my new computer but apple id is old email address no longer accessible and password forgotten. Security information date of birth also not accepted

I want to play music bought from itunes on my new computer but apple id is old email address no longer accessible and password forgotten. Security information date of birth also not accepted. No good apple sending reset information to old email address as I cannot access it

Welcome to the Apple Community.
The following article(s) may help you.
Moving your iTunes library to a new computer

HT201269 How do I get my old iPhone/iTunes info from an old email address that I no longer have the password to change it to my new email address?

I no longer have my Comcast account how do I get all my old iTunes Facebook etc from my old email to my new phone and centurylink email account
[email protected] when I no longer have the password to the Comcast account

I really can't comprehend the logic that leads to believe that password for old apple id will come to e-mail for new id. Buy may be I just misunderstood something. Contact Apple for assist with password retrieval. If you can verify yourself as account owner they may be able to help you.

Thunderbird stopped downloading emails from the web server and now when I try to add a new account I get a message to say it cannot find the email server.

Thunderbird was working and then for no reason it stopped downloading emails from the web server. I can access my emails in the web server okay. I have tried to remove my account and then add it again as a new account but I get a message saying that Thunderbird cannot find the email server. I have also tried to uninstall and reinstall Thunderbird but with the same result. I have also tried to remove the default mail server but have been unable to do so. How can I fix this?

I figured out a workaround.... Since I can get e-mails to populate via iSync and my other computer is running Leopard (it's a powerpc chip and can't run Snow Leopard), I added the account on the other computer and got the new account to populate into my SL machine with iSync. I don't like that I can't actually add the account directly, but at least this got me working.

Report Distribution - Email Server Question

Hi guys.
I need to know if anyone is using the "Offline Distribution Wizard" for emailing reports?
We run BPC v5.1, and have an issue with sending these emails.
Basically, we have an email server, to which all of our clients connect. However, this cannot accept SMTP mail (the type that BPC sends).
Therefore, we have an email forwarding server (in our case a Domino server - Lotus Notes - But could just as easily be Exchange).
Anyway, from the tests that I have run, I set the BPC web server up on the Allow-List of the mail forwarding server, but it still failed to send the mails.
When I tried sending direectly from the server (installed an Excel client on the server and ran the wizard from there), it worked.
What I have now found is that BPC does not send the emails from the server, it simply sends the SMTP settings to the client and the client sends the email.
What this means is that I would have to add (and maintain) well oover 100 users on the Allow-List of the mail forwarding server.
This cannot be right?
Does anyone else have experience of dealing with this kind of environment, and how did you work around this issue (or did you simply give up)?
Thanks
Craig

Gave up trying to resolve this for now

New email server batch reports no longer email

Similar Messages

Maybe you are looking for