New Employer and Default Rates Notice in BSI TaxFactory
Do anyone know what this 'New Employer and Default Rates Notice in BSI TaxFactory " will entail? How will this affect existing employers? What is needed to ready your system to accommodate this?
Thanks,
You have two identical threads, and they are in the same forum.
Please close one of them.
Similar Messages
-
New firmware and downstream rate
I have upgraded my DSL line to 512kb and needed to confirm a few things.
What should my downstream and upstream rate be approximately ? Also why does my ISP i need to get in a technician to reset the router from internally because my downstream rate currently reflects 288kbps.See below.
DSL Status: UP
DSL Modulation Mode: GDMT
DSL Path Mode: FAST
Downstream Rate: 288 Kbps
Upstream Rate: 160 Kbps
Downstream Margin: 23 db
Upstream Margin: 31 db
Downstream Line Attenuation: 49
Upstream Line Attenuation: 31
Downstream Transmit Power: 0
Upstream Transmit Power: 0So you are telling me that the update is intended to be confusing and slower than the previous version? Im not happy at all with this... I wish the Firmware was reversable.
-
I have just bought a new computer and i am transfering my music from my ipod onto my new computer, I have put the files from the music option from my ipod onto my computer. alot of the songs have come across, however there is alot of songs that havent. I have noticed that the m4a files come across but the mp3 does not. the new computer has windows 8 on it, which is very new to me. when i try and play the mp3 files, it will open them up in a different programme and will not open in itunes. does anyone know what i can do?!?!!?!?!
THANKSHave you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
BTW this is the iPod touch forum -
i am currently running a trial version of indesign. i am trying to make a cd booklet. when i open a new document and try to find 'compact disc' in the document presets, it isn't there. all i have for options are 'default and custom'. is it possible to open the 'compact disc' preset from a trial version?
Are you sure, Eugene? I have this option:
-
I am about to buy a new computer and have noticed that the system comes with Windows 8. I have Photoshop CS6 for windows 7.
I would like to know if this can be loaded on the new system? and what steps I need to take to ensure it functions correctly.Windows 8 meets Photoshop CS6 system requirements, see the link below
System requirements | Photoshop -
In PC I have changed the default app location from (c:/users/username/My Music/iTunes) to other (d:iTunes) and copied the previous content to new location and changed the Default location in Edit preference. Now in iTunes, my previous apps are not visible. Is there any solution to this?
wjosten - thanks very much for the detailed instructions. I'll try this as soon as I get my replacement and it looks like you'll probably end up getting the green tick
-
Freight Conditions and Commission Rate - New Requirement
Hi All,
There is new requirement about Freight condition and Commission Rate. Please see below for details:
I got the requirement lets say:
They want 3 different types of freight like 1st Freight - based on unit/qty, 2nd freight - Fixed Amount, and 3rd Freight - based on kilometer, out of this 3 any one will applicable in sale order at a time depends how they want to charge. they have existing pricing procedure.
I hope the above freight related part clear to you all.
Now the commision part:
Here they are giving commisions whatever rate decided to the commission agent, here also for commission agent they want 3 different types 1st will be Fixed Amount, 2nd will be based on percentage and 3rd will be normal way.
Please help and advice how to achieve this type of requirement.hi
Condition Exclusion
The system can exclude conditions so that they are not taken into account during pricing in sales documents.
Material 4711 costs 150 USD. Some customers receive a discount of 10 USD per 100 pieces.
However, a specific customer can buy the material for 100 USD. Since this is a particularly good price, the customer should not also have a discount of 10 USD per 100 pieces. Therefore, this discount is to be excluded from pricing.
To do this, you must follow two steps:
You must set a condition exclusion indicator for the price. You can do this in two ways: If you want to set the condition exclusion indicator a follows then you specify it:
- for all condition records of a condition type (e.g. with condition type PR00) when defining a condition type in SD Customizing
- for an individual condition record (e.g. only for material 4711) in the detail screen of a condition record (in the Condition exclusion field)
You must set a condition for the discount in the pricing procedure in Customizing for sales. If this condition is set, the discount is not valid if the condition exclusion indicator is set. Condition 2 is available in the standard R/3 System.
The condition exclusion indicator is not valid for condition supplements.
This means that if a condition record contains condition supplements they will be taken into account during pricing.
Condition Exclusion Group u2013
In any normal situation there could be more than one condition type in a pricing procedure offering a discount to a customer. Should the discounts be automatically determined, there is the risk that the customer will receive all the relevant discounts and thus purchase the product for a lower price than he should.
By using u2018condition exclusion groupsu2019 you can ensure that the customer does not receive all the discounts, but instead only receives the best of the available discount condition types.
Menu path u2013 IMG - Sales & Distribution - Basic functions u2013 pricing u2013 condition exclusion u2013 condition exclusion for groups of conditions (OV31).
A condition exclusion group is merely a grouping of condition types that are compared to each other during pricing and result in the exclusion of particular condition types within a group or entire groups. It is important to note that the condition types you want the system to compare must exist in the pricing procedure and must have valid condition records created for them.
If for example, a sales order is created using the pricing procedure that the exclusion group is assigned to, you can see that the condition offering the most favorable discount to the customer is represented in the pricing procedure.
For instance, condition type K007 has offered a discount of 10% off the sale price or a real value of $30, while another condition type K005 has offered a real value discount of $10. The system then takes the best discount for the customer between the two, which is K007 and makes the other discount K005 inactive. This can be seen by double clicking on the condition type K005, where you can find a entry saying u2018Inactive A condition exclusion itemu2019.
There are four possible methods of using condition exclusion groups u2013
A u2013 best condition between the condition types
B u2013 best condition within the condition types
C u2013 best condition between the two exclusion groups
D u2013 exclusive
E u2013 least favorable within the condition type
F u2013 least favorable within the two exclusion groups
Configuring u2018Condition Exclusion Groupsu2019
First step is to define a u2018condition exclusion groupu2019 by using a four character alpha numeric key.
Next step is to assign the relevant condition types to the exclusion groups such as discount condition types, freight condition types.
After completing the assignment of the condition types to the exclusion group, proceed with assigning the condition exclusion group to the relevant pricing procedure.
After selecting the pricing procedure for which you want the condition exclusion to be active, select the folder u2018Exclusionu2019 where you can assign the relevant condition exclusion procedure to the relevant condition exclusion group.
When using the condition exclusion group to find the best condition record in a condition type u2013 only use one condition type per exclusion group. The most important thing to remember here is to u201Cdeactivateu201D the Exclusive Indicator on the access sequence assigned to that condition type. Otherwise, the system will merely find the first condition record and stop searching for other records. -
I just upgraded to a new MacBook and my wife is inheriting my old MacBook Air. How can I change the her MacBook Air to now be fundamentally hers? That is, so the House Icon under Users folder is her name and not mine? Also the default AppleID for purchase stubbernly remains my own.
You do not mention it, but I will assume you are running OS 10.9.1.
Go to: Apple menu / System Preferences / Users & Groups. Click the padlock and enter your password.
Click the + (plus sign) and set up a new account for your wife. You have to enter a bunch of info. And then create the correct Login Options. Automatic login does not require a password from the selected user.
When that is done, verify the account works by restarting the computer and login as your wife.
Make sure that any applications in your own Users folder that will be needed are moved to the Applications folder in your wife's Users folder.
Now go back to Users and Groups, click the padlock and authenticate, select your own account, and hit the - (minus sign). This step cannot be reversed, so you might want to wait a few days before doing it.
When your wife is logged in, the App Store will know. -
Exqc me but new here.. sample rate in new project? and the way to it..
Im on 8.0.0 and on every new project logic 8 starts in 44,1 16 bit??
My entire system is 24bit/48khz..
The only way to change setting is in prefs.. song prefs (go to midi ??? settings) go to song setting audio and there change samplerate..
Is it just me, or what??
( sorry if you have covered it before..) ( soundcard motu 2408 mk3 + 8xadat in )sorry my mistake..
did that.
still even if i make my new templates ( only work with my own) 24/48, logic "decides" to start in 44,1.
I ( used to ) use my enviro to midi and CC# control 5-8 external boxes, so i need to make my own set up/template..
Still must check If I can make a new template where default is 48/24..
If yes I get back.. -
Travel Management-Receipt Maximum rates and Default values
Hi
I need some help on one of the issue we are facing in Travel Management. We are expected to Go-live very soon.
We are unable to apply a very basic check of receipt maximum amount at
the receipt entry in the portal for travel expenses. This functionality
is very much provided by SAP in the backend configuration but it is not working in the backend also in our Development system.
This is concerning the maximum and default amounts in
View V_T706B2 are related to the IMG
"Define Influence of Control Parameters: Receipt Maximum Rate"
I have analysed the table entries but could not
get the desired solution.
In the meanwhile based on SAP note: 808437-Warning message when max
rate is exceeded negative value, we looked into the code and found that
the code for checking the maximumum amounts is "commented" in the
lastest SP32 SAP HR version in the DEVELOPMENT system we are working
on.
I also looked into (SAP Note: 1114398---Country and Region when
reading maximum amounts and defaults) and have found that the
correction suggested in this note may already be applied as our D35
System EA_HR patch level is already SAPK-60211INEAHR and Note
correction in SAPK-60203INEAHR is of old level, hence we have not applied this correction.
Furthermore I have checked and found that in our IDES system these checks
for Maximum amounts and defaults are working fine. The IDES system is
at level 0002 and highest support package is SAPKE60002.
Many thanks in advance !
RiteshHi Ritesh:
We had a situation in which our expense types require both a warning message and request for additional information when the maximum is exceeded. We were told that ECC6.0 can handle only one action per expense type/amount. In our old system, R4.6C, it could handle multiple actions per amount for a receipt type.
I am not sure if this is your issue - having multiple actions for a expense type/amount combination.
We got around this by leaving one action at the expected amount and setting the other to 0.01 lower.
Lisa -
Is anyone else having this problem? I never had a problem with the 3Gs!!
Almost there...
I'm replying to myself, as I have found the answer.
1. Started iTunes, connected iPhone 4S, turned on Airplane mode.
2. In iTunes, hovered mouse over my iPhone 4S name in left column, in popup box clicked on "Restore from Backup..."
3. From menu clicked on name of my old iPhone 3GS backup.
4. Backup appeared to be finished in about 8 minutes, but I new that could not be correct...iPhone had rebooted, so I entered password. I could see that most apps were "waiting" and grayed out, also in iTunes top status box indicated that apps were being sync'd. Also noted that my iPhone 4S now had the same name as my "old" iPhone 3GS.
5. After some time (a couple of hours, perhaps, not sure because I went to sleep), everything appeared sync'd on new iPhone, and iTunes stated that sync was OK.
6. Manually renamed my new iPhone 4S to its correct name, then backed up to computer.
I decided to hold off on iCloud for now - two majore issues: 1) have heard some reports of data dissappearing, and 2) I will have to talk to Apple about MobileMe instructions for moving to iCloud, which state that move will not transfer my mobileme email, and also that I cannot install iCloud management software (nor sync to Outlook) on my Windows XP computer - I intend to upgrade to a new Win7 in January 2010, and I have heard it is not so simple to change iTunes/device syncing to another computer. Sounds like a good project for the Christmas-NewYear holidays... -
Please help! Two days ago I received a message stating that a new update was available for my new 5s and IPad Air. I attempted to do the update and wasn't allowed to. Since then I am not able to access the internet on either device. It has been 2 days. These are very expensive paper weights that are only 2 weeks old!
Thank you for your response. Like you it doesn't make sense to me either, however I finally got a response back from AT&T. There are two towers down in my rural area and they should be backup tomorrow between 2-3pm. The update 'mess' is just a coincidence? We'll see,,,,,,,,,,,,,,,,
-
I don't really want to re-upload my CD's to my new laptop and my old laptop is practically dead
You will need to copy everything from your old computer or your backup copy of your old computer to your new one.
-
Problem statement
When I mount a Windows NFS service file share using UUUA and set the Owner and Group, and set the SetGID bit on the parent folder in a hierarchy. New Files and folders inside and underneath the parent folder do not inherit the Owner and Group permissions
of the parent.
I am given to understand from this Microsoft KnowledgeBase article (http://support.microsoft.com/kb/951716/en-gb) the problem is due to the Windows implmentation of NFS Services not supporting the Solaris SystemV or BSD grpid "Semantics"
However the article says the same functionality can acheived by using ACE Inheritance in conjunction with changing the Registry setting for "KeepInheritance" to enable Inheritance propagation of the Permissions by the Windows NFS Services.
1. The Precise location of the "KeepInheritance" DWORD key appears to have "moved" in Windows Server 2012 from a Services path to a Software path, is this documented somewhere? And after enabling it, (or creating it in the previous
location) the feature seems non-functional. Is there a method to file a Bug with Microsoft for this Feature?
2. All of the references on demonstrating how to set an ACE to achieve the same result "currently" either lead to broken links on Microsoft technical websites, or are not explicit they are vague or circumreferential. There are no plain Examples.
Can an Example be provided?
3. Is UUUA compatible with the method of setting ACE to acheive this result, or must the Linux client mount be "Mapped" using an Authentication source. And could that be with the new Flat File passwd and group files in c:\windows\system32\drivers\etc
and is there an Example available.
Scenario:
Windows Server 2012 Standard
File Server (Role)
+- Server for NFS (Role) << -- installed
General --
Folder path: F:\Shares\raid-6-array
Remote path: fs4:/raid-6-array
Protocol: NFS
Authentication --
No server authentication
+- No server authentication (AUTH_SYS)
++- Enable unmapped user access
+++- Allow unmapped user access by UID/GID
Share Permissions --
Name: linux_nfs_client.host.edu
Permissions: Read/Write
Root Access: Allowed
Encoding: ANSI
NTFS Permissions --
Type: Allow
Principal: BUILTIN\Administrators
Access: Full Control
Applies to: This folder only
Type: Allow
Principal: NT AUTHORITY\SYSTEM
Access: Full Control
Applies to: This folder only
-- John Willis, Facebook: John-Willis, Skype: john.willis7416I'm making some "major" progress on this problem.
1. Apparently the "semantics" issue to honor SGID or grpid in NFS on the server side or the client side has been debated for some time. It also existed as of 2009 between Solaris nfs server and Linux nfs clients. The Linux community defaulted to declaring
it a "Server" side issue to avoid "Race" conditions between simultaneous access users and the local file system daemons. The client would have to "check" for the SGID and reformulate its CREATE request to specify the Secondary group it would have to "notice"
by which time it could have changed on the server. SUN declined to fix it.. even though there were reports it did not behave the same between nfs3 vs nfs4 daemons.. which might be because nfs4 servers have local ACL or ACE entries to process.. and a new local/nfs
"inheritance" scheme to worry about honoring.. that could place it in conflict with remote access.. and push the responsibility "outwards" to the nfs client.. introducing a race condition, necessitating "locking" semantics.
This article covers that discovery and no resolution - http://thr3ads.net/zfs-discuss/2009/10/569334-CR6894234-improved-sgid-directory-compatibility-with-non-Solaris-NFS-clients
2. A much Older Microsoft Knowledge Based article had explicit examples of using Windows ACEs and Inheritance to "mitigate" the issue.. basically the nfs client "cannot" update an ACE to make it "Inheritable" [-but-] a Windows side Admin or Windows User
[-can-] update or promote an existing ACE to "Inheritable"
Here are the pertinent statements -
"In Windows Services for UNIX 2.3, you can use the KeepInheritance registry value to set inheritable ACEs and to make sure that these ACEs apply to newly created files and folders on NFS shares."
"Note About the Permissions That Are Set by NFS Clients
The KeepInheritance option only applies ACEs that have inheritance enabled. Any permissions that are set by an NFS client will
only apply to that file or folder, so the resulting ACEs created by an NFS client will
not have inheritance set."
"So
If you want a folder's permissions to be inherited to new subfolders and files, you must set its permissions from the Windows NFS server because the permissions that are set by NFS clients only apply to the folder itself."
http://support.microsoft.com/default.aspx?scid=kb;en-us;321049
3. I have set up a Windows 2008r2 NFS server and mounted it with a Redhat Enteprise Linux 5 release 10 x86_64 server [Oct 31, 2013] and so far this does appear to be the case.
4. In order to mount and then switch user to a non-root user to create subdirectories and files, I had to mount the NFS share (after enabling Anonymous AUTH_SYS mapping) this is not a good thing, but it was because I have been using UUUA - Unmapped Unix
User Access Mapping, which makes no attempt to "map" a Unix UID/GID set by the NFS client to a Windows User account.
To verify the Inheritance of additional ACEs on new subdirectories and files created by a non-root Unix user, on the Windows NFS server I used the right click properties, security tab context menu, then Advanced to list all the ACEs and looked at the far
Column reflecting if it applied to [This folder only, or This folder and Subdirectories, or This folder and subdirectories and files]
5. All new Subdirectories and files createdby the non-root user had a [Non-Inheritance] ACE created for them.
6. I turned a [Non-Inheritance] ACE into an [Inheritance] ACE by selecting it then clicking [Edit] and using the Drop down to select [This folder, subdirs and files] then I went back to the NFS client and created more subdirs and files. Then back to the
Windows NFS server and checked the new subdirs and folders and they did Inherit the Windows NFS server ACE! - However the UID/GID of the subdirs and folders remained unchanged, they did not reflect the new "Effective" ownership or group membership.
7. I "believe" because I was using UUUA and working "behind" the UID/GID presentation layer for the NFS client, it did not update that presentation layer. It might do that "if" I were using a Mapping mechanism and mapped UID/GID to Windows User SIDs and
Group SIDs. Windows 2008r2 no longer has a "simple" Mapping server, it does not accept flat text files and requires a Schema extension to Active Directory just to MAP a windows account to a UID/GID.. a lot of overhead. Windows Server 2012 accepts flat text
files like /etc/passwd and /etc/group to perform this function and is next on my list of things to see if that will update the UID/GID based on the Windows ACE entries. Since the Local ACE take precedence "over" Inherited ACEs there could be a problem. The
Inheritance appears to be intended [only] to retain Administrative rights over user created subdirs and files by adding an additional ACE at the time of creation.
8. I did verify from the NFS client side in Linux that "Even though" the UID/GID seem to reflect the local non-root user should not have the ability to traverse or create new files, the "phantom" NFS Server ACEs are in place and do permit the function..
reconciling the "view" with "reality" appears problematic, unless the User Mapping will update "effective" rights and ownership in the "view"
-- John Willis, Facebook: John-Willis, Skype: john.willis7416 -
Can't import new photos to default catalog in LR3,5
Hi!
I'm running LR3,5 on OSx10.5.8 and recently I've lost the ability to import new photos (from hdd). My default catalog (so far I've been using only one) contains appx.33k photos and I can't import new shots. Yesterday I was shooting tethered camera and everything went fine. Today I wanted to import new files (from hdd) and noticed that "import button" is completly inactive. Dead. I set up a new catalog and managed to process todays photos but when I'm switching to previous catalog the "import" button is still dead.
Thoughts? Ideas? Please help!
Thank you in advance!Just checked the histogram issue-seems OK:
I'm a bit ashamed to ask but where do I find preferences file?
Thanks in advance,
Kuba
Maybe you are looking for
-
No Scaling When I Try to Print an Email
I'm running OS X 10.9.5 on my computer. Trying to print an email from the Mail App (the one that comes with OS X). All configurations for printing are on scale to fit size on A4. Yet, no emails scale and they end up being 3 pages long, having halv of
-
Problem using function SO_DOCUMENT_SEND_API1,
Dear All, I used this function for attach the txt file and send the e-mail to relate user. Now, My output file print out all the data in the same line. how i can split the data line by line ? below is my coding. Please kindly to help me. Regards, Luk
-
is there a difference between M8881LL/A & M8881 on the airport extreme cards? i'm looking for a card for an imac 17in. flat panel 1ghz. thanx, jts
-
Hi I have a situation where in am not able to send emails to a vendor from ME22N I get the following error "E-mail address incorrect or non-existent". This issue is particular to a vendor,the email id maintained for the vendor is a valid one too. Ema
-
HOW TO CHANGE COST CENTER FOR AN INDIVIDUAL EMPLOYEE
HI ALL I WANNA CHANGE A COST CENTER FOR AN EMPLOYEE WITH OUT CHANGING THE GROUP OR HIERARCHY CAN U HELP ME? ..................... I TRIED THRU PA30,PA20 BUT COST CENTER FIELD IN GREY COULOUR.