New/enhanced datasources in ERP 60 enhancement packs

Hi,
I have reviewed a lot of the online documentation on Service Marketplace and SDN, but still have the following open question:
Is there a comprehensive list of all new SAP ERP datasources, or enhancements to existing datasources, that are available in ERP 60 enhancement packs 1, 2, 3 and 4?
Where can I find this list?
Again, I'm aware of the wealth of documentation on EHPs, but I can't seem to find a quick list of the BI datasource changes for EHPs.
Thx,
Lonnie

Hi Lonnie:
Take a look at the Documentation for SAP NetWeaver BI Content Add-On.
http://help.sap.com/content/documentation/netweaver/docu_nw_bi.htm
Here you can find the details for the new DataSources released on each Add-On:
Release Notes SAP NetWeaver 7.0 BI Content Add-On 4, SP 03
http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Release Notes SAP NetWeaver 7.0 BI Content Add-On 4
http://help.sap.com/saphelp_bic704/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Release Notes for
SAP NetWeaver 7.0 BI Content Add-On 3 SP09
SAP NetWeaver 7.0 BI Content Add-On 3 SP08
SAP NetWeaver 7.0 BI Content Add-On 3 SP06
SAP NetWeaver 2004s BI Content Add-On 3 SP04
SAP NetWeaver 2004s BI Content Add-On 3 SP02
SAP NetWeaver 2004s BI Content Add-On 3
SAP NetWeaver 2004s BI Content Add-On 2
http://help.sap.com/saphelp_bic703/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Release Notes BI Content 3.5.3 Add-On SP02
Release Notes BI Content 3.5.3 Add-On
http://help.sap.com/saphelp_nw04/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Regards.
Edited by: Francisco Milan on Sep 23, 2009 10:42 PM

Similar Messages

Help needed for enhancing datasource 0FI_AP_04

Dear all,
I need to enhance datasource '0FI_AP_04' and add field 'GSBER' (Business Area) to it. This datasource is based on tables BASK and BISK and both tables have this field. I would like to add this field to my datasource. When I go to Change Datasouce in RSA5, I dont get this field there. If anybody can tell me how to go about this, I'll be very grateful. Thanks a lot.
Regards,
Sumit

Sumit,
   Enahncing the DS is a 2 part process.
   1. Adding a field to the Extract Structure
   2. Data population for the new field.
<b>i think in your case there is no need to write the 2nd step. If the new field you are using is based on the main tables for extractor simply add the field with Same name it is appearing on the Tables BSAK/BALK.</b>
go to RSA5--> instal the DS.
go to RSA6> select the DS> go with Enhance the DS on the application tool bar.
system will propose the Append Structure naem.
click on enter..
Provide the description for Append Structure.
Add the Filed with Field Name it's appearing on the Table. Field Name should Be Same. there is no need to write code. if the field names are different you need to the second step.
Activate the Append Structure. Maintainthe DS. check teh Data, new field will get the Data.
All the best.
Regards,
Nagesh Ganisetti.

Enhanced Datasource fields not getting displayed in Transformation

Hi,
Eventhough after replicating the datasource, the Enhanced Datasource fields not getting displayed in Transformation.
Eg I have done mapping of 6 fields in transformation from datasource to DSO
Now the datasource is enhanced with 8 fields...........The transformation is not showing the added 2 fields
I am deleting the existing transformation.Is this the only solution?
Kindly suggest your answers.
Thanks,
Sonu.

HI,
Deleting is not solution as it is common scnerio.
Go to the data source in BW and in change mode check the option "transfer" for this two fields and then see if its coming or not.
Thanks
Ajeet

CRM_BWA_MFLOW - Enhance datasource 0BPARTNER_ATTR - Business Partner data

Hi Gurus,
I tried to enhance datasource for Business partner master data 0BPARTNER_ATTR in a SAP CRM System (rel. 4.0).
I used BADI CRM_BWA_MFLOW as a definitions and followed the How-to paper How to enhance CRM content DataSource the interface seams to be ok it is activated.
BUT it seams not to work.
I checked it via RSA3 Extraction checker in debug mode but Im not able to jump in my code.
I guess, I miss one step in the implementation?
Can anyone help me - this would be great.
Best regards
Grit

As far as I can understand, it seem that you did not include it into the CMOD transaction.
In order to do this, you need to do the following:
1 create and henancement into the structure of the 0BPARTNER_ATTR with you additional field, go into transaction CMOD
2 Select the project for BW, if you don't have one, just create it. (You need to include it into the data packet for BW, if you don't have you must create it otherwise you'll get the data packet tmp and you cannot transport it)and select the Henancement Assignment RSAP0001.
3 In the components area you'll get 4 functional exit:
EXIT_SAPLRSAP_001
EXIT_SAPLRSAP_002
EXIT_SAPLRSAP_003
EXIT_SAPLRSAP_004
click on the first exit and than click on INCLUDE ZXRSAU01
in this include you go in the change mode and input this king of code:
WHEN '0BPARTNER_ATTR'.
PERFORM and input you code.
Rgs
Antonino

Installation new Language in our ERP system

Hi;
I need install a new language in our ERP system. I have our productive client. How I need install the new language?
- Client; 000 - execute the SMLT and install the new language
- Client 000, supplement with english
- Client 600 (productive client) supplement with English
- Import Support Packages
It´s correct?
One doubt, when supplement in client 600, What select in the screen?
- Supplement Cross-client tables
- Supplement Client-specific table
      - System and control Tables
     - Customizing table ????????
      - Supplement Only
When implement the new languages, I need implement without users and process in the system or I don´t will have problems with users and process in the system?
Best reagrds.

Hello Daniel,
Before installing the packages, please make sure to check if the system is ready to handle the additional languages.
Help link below mentions all the required notes to check the system, install language packs and post lang import activities.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/3e/9f9a7b95c811d384bb0060975b04f3/frameset.htm
Hope it helps.
Regards,
Srikishan

Hi, i have new computer as my old one packed in and i have lost everything. how do i now sync my i pod without losing the music i manually put there by cd,(no longer have some of the cd's) ?

Hi, I have had to purchase new computer as my old one packed in and i have lost my entire music library. How can I sync my I-Pod touch without losing the music on it that was put there through importing cd's as i no longer have some of the cd's but really want to keep that music?

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
Hopefully you take the time to back up these files regularly in the future.
B-rock

Creating Enhancement Implementation for the Enhancement spot in ECC 6.0

Hi All,
I have an urgent requirement of creating an Enhancement implementation for the existing Enhancement Spot in ECC 6.0 ..
I never worked on enhancement in ECC 6.0.
There is an existing enhancement spot called "ES_SAPLIQS0" in the package " IWOC". which has got three existing implementations
1. DI_ROT_SAPLIQS0
2. ISU_SAPLIQS0
3. DIMP_GENERAL_SAPLIQS0
I need to create another implementation for the same enhancement spot.. Please let me know the detailed procedure to create the enhancement implementation for the same spot..
Thanks-
Shrikant
useful answers will be rewarded.

First of all find out the include program where you want to write the logic.. Click the spiral button to go to enhancement mode.. then click on Edit > Enhancement operations> Show implicit enhancement points.
This will hightlight all the enhancement points in your include program. Right click on exact enhancement point and select Enhancement Implementations --> Create,, It should give you the same Enhancement spot you are talking about. select that and write the code.. This code will be automatically appear in the same enhancement spot. You can see one more Enhancement implementation in the same Enhancement spot from the transaction code se19.
Hope my explanation is clear, if you have any doubts, send me a mail at [email protected]
All the best.
Shrikant

Query on Enhancement Spots and Composite Enhancement spots

Hi Group,
I want to know about "Enhancement Spots and Composite Enhancement spots" and how to implement them in the system?
please provide me the uses and how to implement them for our requirements?
Thanks,
Vishnu.

Hai.
check the links.
http://help.sap.com/saphelp_nw70/helpdata/en/91/f1e540f8648431e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/1c/2cee3957f7cd55e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/1c/2cee3957f7cd55e10000000a114084/content.htm
http://www.sap.info/public/INT/int/index/Category-28943c61b1e60d84b-int/0/articlesVersions-22681475d1a792eff3
regards.
sowjanya.b

Cannot see new Z datasource

Hi
I have created a new Z datasource in R/3, but am unable to see it in BW..
Here's what I've done:
R/3:
1. RSO2
2. Created Text datasource, based on Table
3. I can see it in RSA6. Also went to ROOSOURCE table and it is in A version
4. Ran Extractor checker (rsa3) and got the required data
BW:
1. I click on Source systems
2. Searched for the Z datasource to replicate, but couldn't find it.
3. Checked Source system connection and it is ok.
Is there anything else I need to do?
Thanks
Adi.

hi,
Hi, select the source system where you created the data source, and select the application component and replicate data source. if you dont find it just refresh the subtree. you need to activate the data source in BW Again.
regards
vadlamudi

Enhancements with the Easy Enhance - Transactions

Hi,
In CRM 2007, I have noticed a separate section of enhancing transactions alone.
IMG->Customer Relationship Management-> Transactions-> Basic Settings-> Enhancements with the Easy Enhancement Workbench
How is this different from adding fields to transaction using TCODE EEWB ? Has anyone used this feature ?
Regards

Hi,
One of the methods for displaying additional data on existing Business Transaction (One Order, Oppurtunity etc.,)is to enhance the component using EEWB and the system takes care of most of the things.
All we need to do is generate the required methods at the Component Work Bench and add the field on to the UI.
Using the path you mentioned,
existing standard components or custom created components be assigned to a component and can be displayed on the UI. For this settings need to be maintained in SPRO.
I believe this can be done only for Business Transactions like One Order etc.,
Just explore the path you mentioned.
Regards,
Masood Imrani S.

Difference when using old and new PCA datasources

Hello experts,
We have implemented the new PCA datasources provided by business content version 3.3. We have built a new infocube (ZPCA_C01) as we were not concerned about the appropriate performance of these new datasources 0EC_PCA_3 and 0EC_PCA_4.
After loading the new cube (ZPCA_C01) with the new datasources 0EC_PCA_3 and 4, we made a comparison to the content of the old cube 0PCA_C01, that was loaded with 0EC_PCA_1.
For thesame period (2005.001-002) there is a difference between the contents of the cubes. When checking the results I found that this may be caused by the fact, that 0EC_PCA_4 does not populate "Total credit postings" and "Total debit postings" fields in the new cube, however, we have a couple of records in table GLPCA, where ACTIV = 'PRC4', and that have a corresponding record in GLPCT, where there is a figure in
TSL02 field. It results in the fact that>
- 0EC_PCA_1 extracts the figure from GLPCT for Posting Period 2,
- 0EC_PCA_4 does not extract the same figure from GLPCA.
Can you please help me with the above problem? Do you know how Credit and Debit figures get to BW from GLPCA, where ACTIV='PRC4'?
Thanks,
Csaba

user10871298 wrote:
Hi
I am exeuting a trigger and while retrieving a date field from it using :OLD and :NEW variables, it leaves the timestamp part.
for example,the actual value for start_date field in the table is '10/12/2005 7:04:25 PM', but when I use :NEW.start_date , it returns only '10/12/2005' .
How to make it return the timestamp also?
Thanks.How are you determining that it's missing the time component from it?
If it's a DATE datatype then it will have both date and time components. If you take that and store it in a DATE datatype column then that too will store the date and time components. If you then go and view that data, it will have both date and time components unless you have your local settings (NLS settings etc) set so that dates are displayed without the time portion. That doesn't mean the data is not there, but that you are not displaying it when you query it.

New Webservice Datasource:Not Overwriting with old one in Production

Hi,
I have a Webservice Data Source which is loading XML based Data to DSO & Then to Infocube.
In development I it is working fine even Loading Delta perfectly. Then moved it production.
Again due to some client request I have made changes in Web Service Data Source & DSO & Infocube.It is also worked fine in Development. Again moved to production.
But after moving to production all objercts of DSO/Infocube changes are fine. Even Transformation/DTP is as it is with Development for upload from DSO To Infocube.
Issue : The New Webservice datasource is not overwriting Old one in Production even I capture in Transport request all changes correctly, same also applies Transforamtion/DTP too from Webservice Datasource to DSO..
I need How to Overwrite Datasource/Transforamation/DTP in Production with new objects of same in Development.
Please suggest.Need the steps in detail. It could be bug or some other issue which need to look into.
Regards,
Subhadarshi

That is exactly correct: Time Machine backs-up entire systems, not just data. That's how many folks back-up two (or more) Macs to the same TM drive without conflicts.
You cannot combine them.
From one Mac, you see only it's backups when you +Enter Time Machine.+
But you can see those from another Mac by holding down the Option key as you select the TM icon in the menubar, changing +Enter Time Machine+ to +Browse Other Time Machine Disks.+ Then you can browse, restore, or delete those backups normally.
You also need to know that TM backup processes on the new Mac will not delete the backups from the old Mac in the usual fashion. You'll have to do that manually (via TM, not the Finder), or bite that bullet and erase the drive.
To delete backups from the old Mac, +Browse Other Time Machine Disks,+ select the backup you want to delete from the "cascade" of Finder windows and click the "gear" icon in the Finder window's toolbar, then select +Delete Backup.+ You'll get a confirmation prompt, then one for your Administrator's password, then TM will delete it.
Usually the deletion will be very quick; but some backups will take a very long time to delete (if you exit TM, you may see a progress bar). Unfortunately, there's no way to tell which will be quick and which won't.

Enhanced receiver determinatin and enhanced interface determinatin

hi all,
how to do the enhanced receiver determinatin and enhanced interface determinatin,please help me,
regards,
subba reddy

Hi Subba,
Enhance receiver determinantion is used when u want to choose reciver at runtime.
create a message mapping with source structure as ur source and for target structure use the "reciverdetermination" message type ( u will get it under BASIS SWCV)...
enhance interface determinatin is used .. when u have used multimapping....

Enhanced datasource field not replicated

Hi All,
I enhanced 0employe_attr datasource with one custom field. I appened the structure and I wrote user exit and activated . But when i replicate to BW the new field is not replicated.
I unchecked the hide field in the datasource and made it to selection and generated it.
When I run RSA 3 i can see record populating for the field. But the enhanced field is not replicating. to BW.
Regards
Vasister

Hi Jeny,
Sorry I could update , Currently i am working on 3.1 version, I replicated the datasource and I forgot to move the field from datasource to transfer structure in the inforsource maintance. Bcoz of that I could find the enhanced field in the transfer structure of infosource.
Anyways please uncheck the hide field or field only in the RSA6 after your enhancement and generate the datsource. and then replicate .
Regards
A:Vasister

Change enhanced datasource structure

Hi All,
I had enhanced a datasource, and added some new fields to the structure. Now I realized that one of the fields is not necessary in BW. Is there a way I can delete that field from the extract structure? and add a new field of a different component type in its place.
Thanks,
Doniv

Hi Doniv,
Look here:
Re: Adding a field to the extract structure of 0FI_GL_4
BEst regards,
Eugene

New/enhanced datasources in ERP 60 enhancement packs

Similar Messages

Maybe you are looking for