New entries tab not appearing in tcode VOR1, VOR2 in application tool bar

Hi guru's
Suddenly overnight the new entries tab present in the application tool bar seems to have been vanished from tcode VOR1 & VOR2, in the sandbox, development & quality server, even when the client is open, i.e in tcode SCC4 we have allowed changes to be made, protection level is "0" and changes to repository and cross-client customising allowed.
Please suggest where & what are the other changes I have to make so that I can get the new entries tab in tcode VOR1 & VOR2
Thanks & best regards
satish

Hi Venkat
That is where the problem lies. The sales organisation, distribution channel & division has been defined & assigned and even the respective sales area's has been assigned to the respective document types.
But still the system ECC 6.0 does not allow to create any sales orders because the assgnment in tcodes VOR1 & VOR2 is still pending and the entries do not appear there by default.
Once again the distribution channels and divisions has to be assgined to the respective sales organisations in VOR1 & VOR2
But since the new entries tab is absent I am not able to create any new sales orders because the assignment in tcodes VOR1 & VOR2 is pending.
Please suggest a solution.
Thanks
satish

Similar Messages

New camera profile not "appearing" in ACR, but does in Lightroom

I recently created a camera profile for a Nikon D200, using an X-Rite Colorchecker chart photo and the Chart feature in the DNG Editor. I exported the camera profile. When I go to the Calibration tab in ACR 5.5, the new profile does not appear in the drop down list with the other camera profiles. However, when I go to the Develop module in Lightroom 2.5, the new profile does appear in the drop down list there.
I am running Windows 7. Snooping around my root drive I find that if I look within the Users\User Name\AppData\Roaming\Adobe\CameraRaw\CameraProfiles directory (referenced in the Fraser and Schewe CS4 Camera Raw book as the Vista location for the profiles) I can find no camera profiles and when I place the new profile there it still does not appear in ACR. When I look in ProgramData\Adobe\CameraRaw\CameraProfiles\Camera\Nikon D200 directory I can see the regular set of camera profiles for the camera, as well as the one I created, but as I previously stated, the newly created profile does not appear in the ACR list.
A side note - I did some experimentation with camera profile names. I added "XX" to the end of the Nikon Vivid profile name (not the extension), and then that profile no longer appears in the ACR list of profiles. I removed the extra letters and then the profile reappears in the ACR list of profiles. Seemed odd behavior to me. I also noticed that the profile I created with DNG Editor is noticeably smaller than the others provided by Adobe (28K compared to 110k).
Hope someone has a suggestion for me.

Your reminder about both Photoshop (main) and Bridge needing to be shut down for changes to take effect reminded me that I had Bridge set to "auto-start at log-in". So I checked and it was still running (shown with the other hidden icons). When I "shut it down" from the UI I had thought it was fully terminated. So I completely shut Bridge down, restarted, and the new profile now appears.
Thanks for the reminder/pointer in the right direction.

TS1538 My the new ipad does not appear in itunes, Pls help

My ipad does not appear in Itunes to restore or back up data. Thestatus of my device are:
- updated the latest Itunes version 10.6 .
- tried to restart Apple Mobile Device in Window but it still doesn't work.
- Could not restore in DFU becasue the window doesn't recognize ipad. It appeared cable & itunes disk images but it itunes does not recognize.
- When i pluged the ipad in my laptop, window could not reconize ipad neither.
Please help to solve it!

Let me summary what i have done in the last few days to try to fix the issue taht the new ipad does not appear on itunes 10.6 so that you guys can have an overview to help me :
- removed previous itunes together with Apple Mobile Device and Bonjours
- Reinstall latest version Itunes
- restart computer (for sure the problem not from laptop becasue my other new ipad and iphone4 stil work well with itunes)
- tried using recovery mode when the iPad is connected with computer and iTunes open; Keep the Powerbutton and the Homebutton pressed at the same time until see the Apple logo on iPad screen.Then wait for about 10 minutes (i repeat this step many times). Ipad is turned on but still not connect to itunes or no notice board appeared on itunes to start restore
- I changed the usb cable/port...nothing change
status of device is:
- battery is fully charged
- My laptop (window 7)
- All what i can get is the ipad is charged when i plug in laptop.
- no apple device is recognized on "my computer" window
- no images tab is pop up as usual to copy photo
Apple experts ...help me...pls...

In iWeb, blog entries are not appearing

in iWeb, am entering blog entries which are appearing in the blog archive but showing up as an entry for people to see. Any suggestions?

Do you mean 'appearing in the blog archive but not showing up as an entry for people to see' ?
By default iWeb limits the number of entries in a blog feed to 5; it then moves older episodes to the archive page (and out of the feed) as new entries are made. You can increase this number to 50 in the RSS section of the Inspector.
New entries should not be appearing in the Archive, though if you were giving them older dates then they presumably would.
Posting the URL of your blog might aid in finding a solution.

Created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

You are using an older version of firefox, upgrade your browser to Firefox 8 and try
* getfirefox.com

HT2513 In my iCal, "new reminder" does not appear in the menu under "File". How can I get reminders to show up on my iCal

In my iCal, "new reminder" does not appear in the menu under "File". How can I get reminders to show up on my iCal?

If you're running Mountain Lion (10.8.3), reminders is now a separate app. Launch reminders from your applications group and you will be able to access File>New Reminder.

After GL Year opening the months of new year are not appearing in open period window of Gl?

Hi All,
After GL Year opening the months of new year are not appearing in open period window of Gl? Am i missing any thing???
regards
Shahzad M. Saleem

Have you checked GL setups
Setup accounting manager >
Query your OU >
Under setup steps click on Update for ledger
Under accounting calendar
Number of future enterable periods.

Shipping tab not appearing in PO

Dear Sir,
I hv made all the relevend configuration and vendor creation for PO but still shipping tab not appearing in po.
I dont know wht step i hv missed out, please advise what should i do.
Looking forward for your quick response on th same.
Regards
Parul

Hi Parul
Pls check the following settings.
1.     Define receiving plant for sto. (Storage location also for this plant if required).
2.     Assign receiving plant to company code.
3.     Assign receiving plant to the supplying plants sales org, distribution channel.
4.     Assign shipping point of supplying plant to receiving plant.
5.     Maintain purchasing organization and assign it to receiving plant and company code.
6.     Create receiving plant as a customer in supplying plant (normal customer creation).
7.     Define shipping data for plants: imgu2014mm-----po-----setup sto.
                     Select receiving plant and assign customer number (previous step number)
                     Assign the sales area of supplying plant.
                     Select supplying plant assign the sales area of supplying plant
8.     Assign delivery types and checking rules (imgu2014mm-----po-----setup sto)
9.     Assign document types, one-step procedure, under delivery tolerance. (same above path)
10.     Extend the material to the receiving plant.
11.     For Second plant assign manual shipping point as of first plant (OVL2)
Br.
Ramana

New Bookmarks are not appearing in bookmarks folder

New Bookmarks are not appearing in bookmarks folder. or appear in any folder I try to save them to.

Triple-click the line below on this page to select it:
~/Library/Safari/Bookmarks.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

New IR's not appearing in Views for non-admins

We are in pre-production testing for SM 2012 SP1. We only have a few user roles beside the built in roles. We have a 'standard' group
which has access to just about everything except for sensitive items relating to user termination, legal, etc. We have a group which can see those sensitive items, and then we the built in administrators. <o:p></o:p>
When non-admins create an IR or SR, it sometimes takes up to 5 minutes for the item to show up a custom “all open incidents”
view, or in a custom “my incidents” view. In a few isolated cases, the work item did not appear for over an hour. However, admins can see all of these work items immediately in any view that should, by criteria, be displaying it.<o:p></o:p>
What would cause a work item to display immediately in all appropriate views for admins, but not for non-admins?<o:p></o:p>

Sorry for the delay in updating. Our management team got very frustrated with the performance and nearly killed the whole project. I got them to give SM another chance with R2, hoping that some of issues would be resolved. This issue was
not resolved.
So, I have continued testing. I cleaned up our Queues, so we only have 4 now in the Queues list. When I open the properties of the our custom user role, the Queue section displays our 4 queues, plus one called Work Item Group from the System
Work Item Library. I started with selecting just 1 Incident queue, for this user role. I created a new IR as this user, and it took nearly 15 minutes for the IR to appear in the view.
I then modified the user role and selected the "All work items can be accessed" radio button. I created another IR and it appeared in the view immediately. Now, this is where it gets interesting. I went back to the user role and set it
back to display a single queue, and the IR disappeared from the view. It didn't appear again for another 10 minutes.
The queue that is this IR should be assigned to is quite simple. Right now, I want it to display all incidents. It is not looking at an advanced class, just incident. Initially, I did not upt any criteria on it at all. I then tried
setting it to just Active Incidents, and still the IR's takes 10-15 minutes to appear.
I still don't understand what an aggressive queue is. Does my queue sound 'aggressive?' The view is looking at Incident (typical), not advanced. I don't see any obvious problems in the Workflow Status section of the Admin pane. What
should I be looking for next? I need to have the ability to filter queues by user roles, but it will cripple productivity if new IRs do not appear for 10-15 minutes.

Excise Tab not appearing in MIGO Screen

Excise Tab not appearing in MIGO Screen
Reg
Sunil

Hi,
For GR, which movement type you are using...?
If it is 103, you will get the excise invoice tab only in 105 GR.
If it is 101 only, check the following configuration.
SPRO-Logistics General-Tax on goods movements-India-Business Transactions-Incoming Excise invoices-Specify which movement type involve excise invoices.
Please revert for further analysis.
Regards,
Siva

Vendor evaluation tab not appearing in ML81N

Hi,
Vendor evaluation tab not appearing in ML81N.
Please suggest

Hello,
Please maintain vendor evaluation for related purchasing organization. Afterwards, vendor evaluation tab will be appeared in ML81N.
Thanks.
Regards,

Results recording tab not appearing in QA32

hi,
can anyone tell me why results tab not appearing in QA32 , is there any authorisation missing?

Just check which roles are added to that used id
selec 1 role that is relevent to inspection (result recording) and add QE01 t_code in that role.
take help from ur basis guy for this.

Sorry new Imac does not appear to have a Mini dp

Sorry new Imac does not appear to have a Mini dp

The new iMacs also do not have a Firewire port so if you have firewire devices you will need a Thundbolt to FW adapter.

Part 1 generated while creating migo but display mode Excise tab not appear

Hi
I created migo Part 1 generated. and excise tab also appeared.
but while display mode Excise tab not appearing. In table J_1part1 Part 1 details are updated.
Please explain What could be the reason
Regards
sitaram

Hi
Please any body give me valuable suggesition.
Thanks and regards
sitaram

New entries tab not appearing in tcode VOR1, VOR2 in application tool bar

Similar Messages

Maybe you are looking for