New entry for a view in SM30 does not save

Hi all,
I created a new entry for a view in SM30.
Then when I tried to SAVE it, it does not SAVE and comes back to the same screen with the new entry. And it continues, until you CANCEL and come out.
Please let me know the reason for it.
Thanks and regards,
Anishur

copy the sap view to a zview make the modifications and generate in se11 the table maintenance generator.
why was it necessary to make the modification to the original SAP view ??
kind regards
arthur
Edited by: A. de Smidt on Apr 16, 2009 9:08 AM

Similar Messages

The SYSVAL table entry for the database version (16) does not match the required version

We upgraded from Tidal Enterprise Scheduler (TES) 5.31 to 6.1 on fresh Windows x64 2008 R2 servers. I did a fresh install but our DBA restored a copy of our database from pre-prod which was at 5.31. I get the error below. Note, SQL went from 2005 to 2012 during this upgrade. Do I need to change a value in this table to reflect the SQL change?
[04/29 12:47:14:198]:TIDAL Enterprise Scheduler: version 6.1.0.133
[04/29 12:47:14:198]:Java version: 1.8.0
[04/29 12:47:14:198]:Java Virtual Machine version: 25.0-b70
[04/29 12:47:14:198]:Start Time : 04/29/14 12:47:14:198
[04/29 12:47:14:198]:----------------------------------------------------------------------------
[04/29 12:47:14:198]:Database URL :jdbc:sqlserver://SQL2012-Host:1433;responseBuffering=adaptive
[04/29 12:47:14:198]:Database Driver :com.microsoft.sqlserver.jdbc.SQLServerDriver
[04/29 12:47:14:198]:Maximum number of log files = 100
[04/29 12:47:14:198]:Added a LogFile called 'RegularFile'
[04/29 12:47:14:198]:LogManager: setting default log
[04/29 12:47:14:214]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:14:495]:MessageBroker: Instantiated TcpTransportServer (URI = tcp://0.0.0.0:6215)
[04/29 12:47:16:975]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:17:272]:The SYSVAL table entry for the database version (16) does not match the required version (23). Shutting down.
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:Shutting down the application

I had this error last night while applying a patch to 6.0. However in my case the version was 21 versus a required version of 23.
As far as i know 6.1 is not compatible with the 5 db schema, so you will need an update / migration plan for the db also.

Transport request prompted when insert new entries for ADCOMP via SM30?

When I insert new entries for table ADCOMP via SM30, the system prompts me for a transport request number when I save the entries. It never asks me the transport no. for any other tables via SM30 edit. Is it something specific to table ADCOMP?
The Table Maintenace Generator is delived by SAP with Authorization group assign to VC (SD User Control), will this cause the issue I have here?
The user is responsible for updating the entries in Production, I had created a Z tcode to run SM30 on this table, at the end, it stills ask for a transport request no.
Can someone help me out on this?
Thanks for your help in advance.

I had searched OSS notes before I posted my question here. Note# 726769 mentioned the maintenance view on ADCOMP. As I mentioned in my last reply, I am NOT going to change anything on ADCOMP, I just create a custom view ZV_ADCOMP on top of it and change the attributes on the custom view.
I tried and it seems working. I can enter data via SM30 on ZV_ADCOMP, it allows me to save the data without a transport request.
I think my problem has been solved. Thanks for Rob and Suhas 's reply. Points has been rewarded for both.

Display As Text (Does Not Save State) Render Behaviour

I suppose this is directed more at the Oracle team members (as most of my posts are...) than anyone else, but others might find this interesting.
It would seem when an item has a type of "Display As Text (Does Not Save State)" the item's value is output as pure text which shows up as text nodes under the TD cell. However if there is anything in the "HTML Form Element Attribute" text field on the "Edit Page Item" page, the APEX rendering engine will output a span tag with those attributes around the value of the item. If the attribute is left null, no span tag is output.
Further more, the span tag does not have an ID attribute. One can also not set the "HTML Form Element" text box to contain the text 'id="" ' as APEX will throw an error stating that you can not specify the id attribute. So if someone would happen to want to access/change the value via JavaScript (say after an Ajax request of a hidden id change), it requires a hack (setting the TD cell's ID to the page item's name), DOM inspecting/sniffing, outputting an ugly disabled text element, altering the flows user's tables, or altering the render cache.
Is there any reason, why this span tag is not always output with the ID attribute set?

Hello Andrew,
You are, of course, correct. The APEX engine does not use the item ID for the "Display as Text (does not save state)". However, if you need to manipulate the item, using JS, you can use the "Display as Text (save state)", which does use the item ID. The on-screen effect is the same, but the JS use is easier.
Your original question though, remains open.
Regards,
Arie.

Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?

Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?

I am using Mac OSX 10.10.1 (memory 8 GB 1600 MHz DDR3, graphics Nvidia GeForce GT 650M 1024 MB)
and my version of Photoshop is CC.
I ran into the same problem: I am able to place and view Blur Gallery pins but the adjustment wheel or outer control arounf the pin that allows you to tweak the blur value disappeared after being initially available. Additionally, the placed pin or pins appear to flicker on screen (while in blur gallery mode) until committing the change with the OK button. I have tried restarting both the computer and Photoshop, as well as what some other users have suggested such as View>Show>Edit pins turned on. Nothing has helped so far. I am still able to adjust the blur amount from the Blur Tools slider. thank you.

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

If you are missing using google maps - try the Nokia map app called "here"

My iPhoto library has suddenly disappeared from my computer. When i click on iPhoto it tells me to choose my library or create a new one. However no library option appears. I have searched the computer for the library but it does not seem to exist

My iPhoto library has suddenly disappeared from my computer.
When i click on iPhoto it tells me to choose my library or create a new one. However no library option appears. I have searched the computer for the library but it does not seem to exist anymore. I did not have time machine set up, so there is no back up. Is there any way i can retrieve my library?
Here is a picture of what appears when i click on iPhoto:

In terms of searching i have searched for photos on my finder. However, none of the photos that appear are from my iPhoto Library.
Search with FindAnyFile. You can download it here: http://apps.tempel.org/FindAnyFile/index.php
Search for any file with "ThumbJPGSegment" in the name. If you added at least one image to your library, the library should contain a file with this name, see OldToad's post: Re: Since I updated to iPhoto 9.5.1, my library is not listed or available. How can I find it? Can I use the time machine to restore it?

How can I add a new entry for determining a requirement type

Dear Friends,
How can I add a new entry for determining a requirement type
via Item Category + MRP type, I see no new entries selection.
This is in Avb Check & TOR-> TOR-> Determination of req type using transaction.
Please help.
Regards
Ravi.

Availability Check and Transfer of Requirements > Transfer of Requirements > Define Requirements Types ?
Just one node above?
Never mind, you need to add entry on item category:S

√using successfully airport express for internet/ when hooking up new airport extreme light glows green, but does NOT appear in devices seen????airport wifi devices

using sucessfully airport express for internet
when hooking up new airport extreme light glows green, but does NOT appear in devices sesn in 5.6 airport wifi devices
wanting to use extreme at base and express in another part of the house

How is the express getting internet? What modem is it plugged into?
How is the extreme setup? New extreme cannot be setup with 5.6 utility.. you must use latest 6.3. Which also means you cannot setup from computer using less than Lion .. or you must use iOS with latest utility but it has limited configuration cf the computer version.
IPv6 is also needed.. turn on local link.

I would like to know how much it would cost to have a new screen for my iPhone 4? Does anyone know? Thanks

I would like to know how much it would cost to have a new screen for my iPhone 4? Does anyone know? Thanks

It depends on the country:
In the U.S:
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 4S
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149
A $6.95 shipping fee will be added if you arrange service online or by calling Apple Technical Support. All fees are in U.S. dollars and are subject to local tax"
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

Updated my iPhone to new iOS6 and my Memory Loader app does not work! Is there a fix for the problem as it seems I am not the only one coming across this issue?

Updated my iPhone to new iOS6 and my Memory Loader app does not work! Is there a fix for the problem as it seems I am not the only one coming across this issue?

Other than what you have already done, you should clear the cache from your browser and, if you use it, your Facebook app. Also, deleting old texts can free up some room.

Type (..) of the context element (..) in view (..) does not exist

Hi all
I have got an question. I have an ABAP webdynpro with a context node which is connected to an ABAP structure.
The context node is mapped to a context node of a view and the fields of the view are mapped to the context node of the view. So the data is send through them. That works fine.
Within this ABAP structure i have added 3 extra new fields. After creating them i activated the structure.
Within the webdynpro i have updated the context mapping between the node and the structure and also between the different mappings between the views and the componentcontroller where this node is used,
Within the context tab of all the views i see all the three new fields.
When i try to map those fields to a field in the screen it cannot be done. i get the following message:
Type (..) of the context element (..) in view (..) does not exist
Anf the new fields are gray.
Does anybody know the solution for this?
kind regards,
Anton Pierhagen

Hi all
Thanks for all of the replies. But unfortunately the right answer wasn't there.
I had tried to map the structure and re-create the node on several levels in my web-dynpro, but there was no change after this changes.
When i created an own dataelement and an own domain in my ABAP structure, it worked.
I could select them in the webdynpro. But why????
i still not get it..
But thanks for the replies!
Kind regards,
Anton Pierhagen

Production scheduling profile for production order type 10 does not exist – SAP Message No.10085

When i tried to make confirmation for Production Order through CO15 transaction , i receive the following error message “ Production scheduling profile for production order type 10 does not exist – SAP Message No.10085 “
In Work Scheduling view, Production Scheduling Profile is maintained as per OPKP only.
How to check whether production scheduling profile is maintained for relevant order type 10.
To do this , i went to OPKP & KOT2_OPA transactions but i don’t know how to check. I guide me through with a screen shot.
Also, pls explain about “Order Type 10” and how it is linked with material and order execution.
Looking for a detailed explanation with screen shots , since i am new to SAP.
Thanks With Regards,
Dinesh Kumar V.

Hello Dinesh,
Please check the order type dependent parameter in OPL8 here you will get the Substitute Scheduler
Then go to OPCH and check valid production scheduling profile assign here as per OPKP to your production scheduler for your plant.
Production order have Order category as 10 Process Order 40 in standard SAP you can check this in OPJH.
Best Regards,
R.Brahmankar

With Adobe Flash, the image is looking for a "zoom" setting and does not find it. The result is that the imbedded image is too large for the space allowed. Is there a zoom setting for Firefox?

When running FB game apps, the image loaded is too large for the FB space. The program looks for a "zoom" setting and does not find it. This was from the error screen. I have not been able to locate where the image zoom is located (found the font adjustment). I am new to FireFox and would like to sort this out please.
Your installed plug in assume Shockwave Flash 10.3, but I thought it was Adobe Flash 10.3. Are they one and the same?
Below is the warning message from the Error Console

I'm not sure the CSS warning is relevant to Flash. Maybe adjust your overall zoom level on Facebook manually from the View menu?
View > Zoom
If you have the orange Firefox button, tap the Alt key to display the classic menu bar.

Publish cloud service fails from Visual Studio 2013 Update 4: Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.

I have a cloud service project with two roles (service and worker). In Visual Studio 2013 Update 4 when I choose "Publish..." from the "Solution Explorer", it opens "Microsoft Azure Activity Log" and quickly terminates.
Here the log:
9:43:47 AM - Applying Diagnostics extension.
9:44:09 AM - Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
All works fine when uploading the package and updating from https://manage.windowsazure.com/. It only fails from within Visual Studio.
What can I do to get it working?

I have the same problem with our Azure project. Two web roles (service and worker). Just updated from SDK2.2 to SDK2.5 and Visual Studio 2013 Update 2 to Update 4. The main reason behind this was to move from log4net to WAD and in doing so, of course directly
move to the new diagnostics version.
Now, I get the same error message in Visual Studio:
11:45:24 - Checking for Remote Desktop certificate...
11:45:25 - Applying Diagnostics extension.
11:45:45 - Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
With my small testing project - also two roles (service and worker) - everything is fine. However, I'm looking for a solution to make by existing production service working.
Also the test project shows no Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml,
but this is no problem - so what's the meaning of or solution to this error messages?
What I found so far:
I deployed the Azure project from the same development environment to another Azure test service: Deployment
showed no errors and the service is running fine! So the problem is not with the source, the development environment, library dependencies etc.
Trying Azure cmdlets for PowerShell also work fine for the new service and fails for the production service with almost the same error message:
Following http://blogs.msdn.com/b/kwill/archive/2014/12/02/windows-azure-diagnostics-upgrading-from-azure-sdk-2-4-to-azure-sdk-2-5.aspx
I tried:
PS C:\> Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -DiagnosticsConfigurationPath $public_config -ServiceName $service_name -Slot 'Staging' -Role $role_name
VERBOSE: Setting PaaSDiagnostics configuration for MyWebRole.
Set-AzureServiceDiagnosticsExtension : BadRequest : Published Asset Entry for Image
Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
At line:1 char:1
+ Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -Diagnostic ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Set-AzureServiceDiagnosticsExtension], CloudException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.CloudException,Microsoft.WindowsAzure.Commands.ServiceManagement.
Extensions.SetAzureServiceDiagnosticsExtensionCommand
The problem seems to be related to those service configuration parts in the cloud which are not replaced
by a new deployment... So what are possible reasons or fixes for this behaviour?
Best regards,
Andreas

New entry for a view in SM30 does not save

Similar Messages

Maybe you are looking for