New Error - Unable to Create Any Backups (com.adobe.versioncue.boot - Failed to start com.adobe.vers
A new error just started showing up in my Vc logs: com.adobe.versioncue.boot - Failed to start com.adobe.versioncue.backup.schedule.
Since the report of this error, I am unable to create any kind of Version Cue backups. Has anyone else seen this error?
I had hoped that a simple reboot would alleviate the problem, but it didn't. The error occurs during Vc startup (boot). It's a little odd that Vc was mostly fine until I rescheduled my Windows Backup (ntbackup.exe) to run 90 minutes earlier, and failed to tell Diskeeper to also not auto-defrag 90 minutes earlier. (In other words, it's possible that Diskeeper did its thing the same time ntbackup was running.)
Running Windows XP SP3. I'm going to try a repair install of Vc in a few moments.
Update 2: ntbackup restore of System State to day before last successful Vc backup failed to correct the problem. I can't even run a manual backup.
Can anyone tell me how to determine the ClassPath used by Vc?
There is no stack trace from this error - the exception is caught and handled, so Vc continues to run after creating the single log entry posted in Msg-1 above. By knowing the ClassPath, I may be able to restore the corrupted Java JARs, if that is the root of this problem.
I'd really hate to have to (ntbackup) restore the whole computer back to last Monday...
Similar Messages
-
I have tried all the resets, the firmware is the latest version, the green light is on.
But I get this message "Unable to complete backup. An error occurred while creating the backup folder."
Any ideas?Do setup again.. but make sure both your wireless and your ethernet have ipv6 turned on to local link.
Done this OK, but no idea about IPv6 - something new to me and rather Appley I think?
Unplug the WAN for the moment.. Just LAN port TC to the MBPr ethernet via thunderbolt.. (thunderbird was the kids puppet series.. Thunderbirds are go!!). Done - New real people Thunderbirds movie coming out soon I believe!!!
Reset the TC again.. sorry.. !! You're welcome ... done.
Make sure the ethernet now has an IP address.. 10.0.1.2 - Yep - done that - on ethernet anyway ...
You need to open the network preferences to find out. Yep - that's good ...
****** I then reconnect the TC WAN to the router - is this right?
And then I think I start going round in circles ... boot, reboot, restart, reboot again ...
The final result is green light on TC, but error message when trying TM is "Backup disk is not available".
Then open the airport utility and you should be able to setup the TC.
Do as little setup as possible and then run the TM backup and see how it goes.
I have managed to get Thunderbird to LAN on TC to create a folder on TC and copy a file onto it.
So I guess the drive is working - it must be the software, settings or perhaps even the operator that isn't quite so clever ...
I named network RFG, named device RFGTC. RFG network shown as IP 192.168.0.72
Wireless router is BT Homehub 3 with IP of 192.168.0.254 - is this issuing new IP addresses when rebooting TC?
I have three wireless networks here - the BT Homehub3 wireless, the TC wireless, and also a D-link power socket ethernet thingy for an ethernet connection to the telly - DHP-W310AV which is also wireless link. All are effectively connected to the BT Homehub - is there a conflict there?
Have several times achieved in Airport Utility schematic with internet shown as green, RFGTC shown as green, light on TC green, but no TM backup run ... "backup disc not available."
And there are no tall building around here to hurl myself off ... at least you can go to Sydney Harbour bridge - not too far away ... it was my son in Sydney that persuaded me to scrap Windows and go Apple ... it's all his fault ... -
I'm trying to backup a my hard drive with disk utility but I'm getting an error Unable to create Backup.dmg" (input/output error). Is there any other way to save my data? I believe my hard drive is failing or corrupt file. I can't boot up. Grey screen and spinning wheel. I've tried everything https://discussions.apple.com/message/20580424#20580424
any help will be greatly appreciated.Check here. Also have you done a TimeMachine back up?
http://support.apple.com/kb/TS2570 -
I am a little perplexed. The Time Machine does seem to be backing up my data but I continually get the following message displayed on my screen 'Unable to complete backup. An error occurred while creating the backup folder.' I am using a WD My Passport for Mac portable hard disk drive.
Hi Peter,
http://pondini.org/TM/C10.html -
I get the following message - "Time Machine could not complete the backup." "Unable to complete backup. An error occurred while creating the backup folder.""
This MAC is partioned with Windows 7 with only 50 gig devoted to Windows so my son can play Flight Simulator X on the machine.
I have a WD Passport External Hard Drive for the Back Up
I have spoken with WD Tech Support and they have been fantastic but I still keep getting this message. Any thought?
MaxxReboot the TC.. it sometimes gets lost on the network.. are you still actually using 10.6.8 as the problem is more prevalent on Lion and ML it seems is no better.
You might find reset of the TC is needed. change the names to short, no spaces pure alphanumeric.
Reset the TM to the new name.. use the A4 in Pondini's great KB.
http://pondini.org/TM/Troubleshooting.html -
My time machine backup has stopped working. I received an error message that is not one listed on the support page: "Unable to complete backup. An error occurred while creating the backup folder." I am on a new MacBook pro running Mountain Lion and using a 1 TB Passport drive as a time machine backup. Running DiskUtility finds no problem on the Passport.
See #C10 in Pondini's excellent Time Machine Troubleshooting.
http://pondini.org/TM/Troubleshooting.html -
I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
Could be you have the wrong cd/dvd. The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
Not sure. Could be your machine does not support the startup manager. You would think the machine would ignore the key.
Where did you get the dvd? What is the number on the DVD?
What machine do you have anyway?
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer ) -
Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn’t complete the backup to “G-RAID”. to complete backup. An error occurred while creating the backup folder."
Any idea what I should do?If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting. -
Getting error Unable to create a new Message Layout: 500 attempts failed.
Dear All,
I am trying to add Form Value item to the Message Component Layout region through personalization.
I am getting error Unable to create a new Message Layout: 500 attempts failed.
While I am able to add Message Text Input, Message Lov Input items without any issue.
Same issue will appear if I add stack layout region.
The requirement is to add two hidden field to a Oracle supplied Message Component Layout Region( Page /oracle/apps/pa/finplan/webui/UpdateForecastLinePG
region UpdateResourceAssignmentRN.FinSumFieldsRN)
Please help me any work around or solution.
Regards
Devender YadavHi Sun,
Thanks for reply.
I am just trying to add Form Value item not the Message Layout Bean.
Jdeveloper is allowing to add the messageLayout bean to messageComponentLayout (I have just tested it). It means OA Framework is facilitating it, it is the personalization Framework which may have restriction.
Regards
Devender Yadav -
Time Machine Issue-Unable to complete backup. An error occurred while creating the backup folder.
Unable to complete backup. An error occurred while creating the backup folder.
As usual, backups worked for a few days. Failed again on wakeup this morning...
Starting standard backup
Backing up to: /Volumes/TM Backup/Backups.backupdb
Error: (22) setxattr for key:com.apple.backupd.ModelID path:/Volumes/TM Backup/Backups.backupdb/David’s Mac Mini size:10
Error: (-50) Creating directory 2012-02-25-074454.inProgress
Failed to make snapshot container.
Error: (22) setxattr for key:com.apple.backupd.ModelID path:/Volumes/TM Backup/Backups.backupdb/David's Mac Mini size:10
Backup failed with error: 2
I've searched Discussions and have seen the exact same error messages with all kinds of Macs and ext HDs, both USB and FW. I can't believe it's a 'failing HD' since it works for a few days; and that it's been going on for months now. Seems like the ext HD would have actually failed by now if that was the case.
I wish I could figure out why three different errors are reported: (-50), (22), and :2 -
Time Machine worked fine w. new HD for 16 backups, but started giving this mssg: [TIME MACHINE COULDN'T COMPLETE THE BACKUP TO "TOSHIBA EXT" ...An error occurred while creating the backup folder]
Make sure your hard drive is formatted properly for the operating system installed. Go to Apple menu -> About This Mac to determine what it is. You posted to the 10.5 forum, but your signature says you have 10.9. Here is the tip on what formatting supports what operating systems:
https://discussions.apple.com/docs/DOC-3003 -
error: Time Machine couldn't complete the backup to Time Capsule - Unable to complete backup. An error occurred while creating the backup folder.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting. -
I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?
Hello Drake, I suspect one or more of the Drives needs repairing, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there. -
got an error message saying "an error occurred while creating the backup folder". I have tried deleting the plist and am using the latest time capsule software and using OS Lion Any ideas what to do please?
See #C10 in Time Machine - Troubleshooting.
-
I am trying to back up my imac using an external storage: My passport Studio 1TB. Each time it trys to back up Time machine says: Unable to complete back up. An error occurred while creating the backup folder. Does anyone know how I can fix this problem? Thanks
Plowie,
Do a search in Discussions, "An error occurred while creating the backup folder."
Many of us are having this problem and no fix has been offered, that I could find.
Unless you call "eject the external HDD; turn off; turn back on" a fix. That's what I have to do every 2 or 3 days; I even have to "force eject", with the concomitant warning message that you could lose data, etc.
Maybe you are looking for
-
My ipod says that I am connected to wifi, but the app store won't load, what do I do?
I just bought a brand new iPod touch yesterday, and I was trying to learn how to use it. I connected to my University's wifi, (and I know it works because my laptop is on it, and other friends have iPod touches who connect to it). I can connect to th
-
Can't Figure Out How To Import XML into a Table?
HELP! I've been using InDesign for several years now... but everything Ive ever done has been basic one off layout concepts. I am working on a website for a musical theater actress and for her resume, Id like to make a PDF which lists in table format
-
Ipod touch 2nd gen disconnects from itunes and turns off while syncing
My Ipod touch i try to connect to itunes and sync it with the itunes, but everytime there is a problem. The problem is that every time it gets like maybe 10 - 30 % done syncing the ipod cuts to a black screen and it is gone from itunes window. Also o
-
Hi all ill explain detail my situation In my forms my menu contain icons like new(+),save,e.t.c. when I click on new(+) icon one additional record comes for inserting But i don't want it. I tried to know the trigger fired for adding record to disabli
-
Variable offsets skipping periods with no data?
Dear Bwers, I have variable offsets defined for 0FISCPER in a query where i put an offset -6 (with less than or equal to) for getting a six month rolling. When i put 10/2007 in the query i see the result displaying 6 periods of data but some of the