New Error

3913-02-08 16:36:48
[nQSError: 12002] Socket communication error at call=recv: (Number=232) Connection reset by peer
The above error i will receive, if i try to open rpd ONLINE from my local machine..sometimes the changes which i want to check-in wont go (or) will take lot of time (or) freezed..then i force close the RPD...
aftersometime when i checked the log, it shows the above error and server is shutdown..this is in DEV environment..but dont know why this error is coming..and everytime i have to restart the server..
any help on this please?

Hi,
Please check below steps.Hope your issue will be resolved.
1. Edit the /etc/hosts file and make the server info the first line in the file like the following:
# Do not remove the following line, or various programs
# that require network functionality will fail.
10.126.10.112 obiprod1.edu.com obiprod1
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
2. Save the changes.
3. Restart the mid tier services as follows:
- cd /ora_home/opmn/bin and run
- opmnctl stopall
- opmnctl startall
- opmnctl status - to verify all processes started successfully.
Regards,
Kishore

Similar Messages

How to create a new error log in VF01

How would I create a new error log upon creation of invoice in VF01 based on the billing block of order.
Here is the scenario:
In VFO1 -->> enter delivery no. then create, but upon creation, an error message appeared incorrect.
In EDIT -->> LOG, this will appear:
Error Log
|
|_____ 4981173515 000010 Document 4946087103 is blocked for billing.
The message blocked for billing is what I want to change based on what billing block in order was triggered.
Tnx in advance!

This is controlled by your delivery to billing copy control requirement (header). You would change the copy control config to use a new requirement and then config that requirement at the header level. (IMG->S&D->Billing->Billing Docs->Maintain Copying Control...). Make a copy of the existing copy requirement (in txn VOFM) and then add your code to check the block type and change the message.

New error message...need help

I got new error message in my application. it happened to even very simple test code
like:
An error occurred calling 'LogResults' in 'ITSDBLog' of 'DBLog 1.0 Type Library'
An error occurred executing a statement.
Schema: Generic Recordset (NI).
Statement: UUT_RESULT.
ODBC driver does not support the requested properties.
-2147217887; User-defined error code.
Step 'Log Results to Database' of sequence 'Log To Database' in 'Database.seq'

Hello,
I found 2 KnowledgeBase articles that I believe will be helpful in troubleshooting this Citadel ODBC issue:
http://digital.ni.com/public.nsf/allkb/BD95183884B0F0F086256D3D0077C888?OpenDocument
http://digital.ni.com/public.nsf/allkb/486B13FA750376A386256E8E0025DECB?OpenDocument
Some other things to try:
It sounds like this has nothing to do with your code module and everything to do with TestStand communicating with the Citadel Database. Have you tried running a sequence with just one step (maybe a pop up) and turning database logging on and see if you get the same error?
With warm regards,
David D.

New error message :duplicate line item

Hi,
We have to add a new error message so that when we try to add a duplicate line item in our qty contract
1. we should not be allowed
2. we should get a error message u201Cduplicate line item not allowedu2019
How to achieve this
Thanks
Arun

Search this forum for "USEREXIT_SAVE_DOCUMENT" and "USEREXIT_SAVE_PREPARE".

New Error - Unable to Create Any Backups (com.adobe.versioncue.boot - Failed to start com.adobe.vers

A new error just started showing up in my Vc logs: com.adobe.versioncue.boot - Failed to start com.adobe.versioncue.backup.schedule.
Since the report of this error, I am unable to create any kind of Version Cue backups. Has anyone else seen this error?
I had hoped that a simple reboot would alleviate the problem, but it didn't. The error occurs during Vc startup (boot). It's a little odd that Vc was mostly fine until I rescheduled my Windows Backup (ntbackup.exe) to run 90 minutes earlier, and failed to tell Diskeeper to also not auto-defrag 90 minutes earlier. (In other words, it's possible that Diskeeper did its thing the same time ntbackup was running.)
Running Windows XP SP3. I'm going to try a repair install of Vc in a few moments.

Update 2: ntbackup restore of System State to day before last successful Vc backup failed to correct the problem. I can't even run a manual backup.
Can anyone tell me how to determine the ClassPath used by Vc?
There is no stack trace from this error - the exception is caught and handled, so Vc continues to run after creating the single log entry posted in Msg-1 above. By knowing the ClassPath, I may be able to restore the corrupted Java JARs, if that is the root of this problem.
I'd really hate to have to (ntbackup) restore the whole computer back to last Monday...

A new error message when ck11n

dear all:
when i make standard cost calculate using ck11n,
a new error message happened , that is 'costing item 00005 is not assigned to
a cost component'.
anyone can tell what should i do to reslove the problem.
thank you a lot.
bset regards!

Hi,
Please check T.code OKTZ.
Regards,
Murali

New error signing a signature box

I am running Reader 9.2 and I am receving a new error message stating the following:
“The document could not be signed.
There was an error when attempting to commit this signature. The document was not saved.
The file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder.”
I receive this error when I open a PDF through an email or a browser (sometimes....) and I try to sign a siganture box with an attached signature pad.
I have seen the error now in 9.3 also.

Just a guess, your jar seems corrupt or is not created with the same JDK version as your keytool is.

New Error Message in PP 2014 on Mac (/ppro801/releases/2014.03/shared/adobe/MediaCore...)

Have been working on a large project on the same computer system (10.8.4) for months. This morning, in one of my sequences, I highlighted the entire sequence, and proceeded to move everything down the timeline, as soon as I dropped the elements further down the timeline, a new error message popped up that I have not seen before.
Nothing has changed on my system to my knowledge. So far, it only happens in that single sequence. There are many other sequences in the project functioning normally.
Any ideas?

I duplicated the sequence and things appear to be back to normal BUT I am hoping this is not the start of a larger problem with the project!

"New" error during ApplyLogOnInfo(...): Invalid parameter value: exceeds...

Invalid parameter value: exceeds the Min or Max or conflicts with existing value or edit mask
error during ApplyLogOnInfo() to the tables contained within a report. Now, this is a "new" error because this was not being thrown when the application was compiled for .Net 1.1 using the Crystal Reports v9.1.5000.0 components. When the application was migrated to .Net 2.0, and set to reference the the 10.2.3600 set of managed components, this started appearing.
Also, this will only occur on certain .rpt files that are loaded, and can be thrown when also executing the VerifyDatabase() method. By certain .rpt files, I mean those that have been opened and saved with Crystal Reports 2008 (warning message when saving indicated that the report will not be able to be opened in Crystal Reports versions earilier the 9.0; should I not assume this is correct?).
' Load a report that had been created in v10, but opened and saved in v12
Dim sFileName As String = "C:\test\CR2008Report1.rpt"
crReportDocument.Load(sFileName, OpenReportMethod.OpenReportByDefault)
crReportDocument.VerifyDatabase() ' Throws the EngineExceptionErrorID.MissingParameterFieldCurrentValue exception:
' Invalid parameter value: exceeds the Min or Max or conflicts with existing value or edit mask
' Load a report that had been created in v10
Dim sFileName As String = "C:\test\CR10Report.rpt"
crReportDocument.Load(sFileName, OpenReportMethod.OpenReportByDefault)
crReportDocument.VerifyDatabase() ' No exceptions; whacky.

>
A G wrote:
> Our product will not get integrated with SharpDevelop as it does with VS though you can use the assembly in you application.
Right, I am aware of the IDE plugin functionality (BTW, I'm going to guess no, but is the functionality present in the "Express" editions?). When a viewer application is created in VS, you can convert/open it in #d and have all of the designer props/pages available. When manually adding the viewer in a new #d project, you can add it, but it doesn't show up visually in the forms designer window (boggle).
> So just make a simple report and try to view it. can you see it?
I will investigate this probably tomorrow...
> Also is your report have any parameter? Dynamic or static?
Yes, there are parameters embedded (?) in the .rpt. There are no parameters added at runtime; only the parameter values are set at runtime.
> Make sure you can see data in report in designer..

Can't open PDFs, Initially received runtime error,updated Reader - new error Adobe Reader has stopped working, uninstalled re-installed same error message Adobe Reader has stopped working

Can't open PDFs, Initially received runtime error,updated Reader - new error Adobe Reader has stopped working, uninstalled re-installed same error message Adobe Reader has stopped working

Assuming that you are in Win (which you haven't said), you can try using this tool to first remove all traces of previous versions of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
and run it immediately after restarting your computer.

Opening exported XML, new error!

Please choose a translation document file! This is what comes up when I try to import the XML file. What is this and where is it located? Help please. I had a file that was created in a newer version of FCP. I wasn't able to open it. So with the help from you guys I had the creator export to an XML format. Now a new error. What do I need to do to open this file. Since I don't know whats going on, the message states that no translation templates were found that matched the XML file. Unable to import. I appreciate your help. W3

You must export from the newer version of Final Cut Pro to the XML version that is supported by the older version of FCP you're using. In the old FCP look at File->Export->XML... and see what version(s) you have available. That is the version you must export from the newer FCP.

IC Web Client -- ADD NEW ERROR MESSAGE

Hi all;
I need to add a new error on the IC Web CTI toolbar to show an Phone is busy error message whenever the outbound call status is busy. I have added the related message in the class through tramsaction SE91.
Now I should implement the following code and the addings:
lv_msgsrv = CL_BSP_WD_MESSAGE_SERVICE => GET_INSTANCE( ).
lv_msgsrv-> ADD_MESSAGE ( iv_msg_type = 'E'
iv_msg_id = 'CRM_IC_APPL_UI_BPID'
iv_msg_number = '503' ).
But I dont know exactly where to implement; I created a new class ZCL_CRM_IC_ERRORCONTROLLER_IMPL but the method that I think I should put the code (GET_AND_PREPARE_MESSAGES) is a private method SO I Can not REDEFINE it. In this case Im a little bit helpless about what I should do now.
Any help in this regard would be highly appreciated.
Thanks in advance!
Best Regards,
Elif

Hi,
Following are the steps to add new fields to the existing view.
- Create a new controller class (ZCL..) with original view class as super class
- Create new BSP application with View and Controller
- Attach the above Z class to the view and controller created and activate the BSP appln.
- Go to transaction BSP_WD_WORKBENCH and type your BSP appln.
- Expand your controller and at the Context class use Wizard to create new context node and bind this to Custom Controller class available.
This whole process requires complte understanding of View, Controller, Custom controller and basic custom modifications to IC Web Frame work.
Kunda Krishna Kishore

New Error Message 64-bit

I installed iTunes 7.5, and there's a new error message when I connect the phone/start iTunes. It used to say use 32 bit version of windows. Now it says:
The iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.
This sounds like there should actually BE a 64-bit version of iTunes, but I don't seem to be able to find it. Ideas?

No 64-bit version has been released that I've heard about or can find. The system requirements on Apple's iTunes web page still say that the 32-bit version of Windows is required. I can only guess that this is an error message that was intended for a future version (it certainly would seem to indicate that one is in planning/development) and that it's been inadvertently left in with phrasing that's currently not applicable.

New error exception concept

Hi,
Can any one give me an example for New error exception concept
Thanks

Hi,
In release 6.10 a new exception concept has been introduced. Please find below a basic syntax of how to code the new error-handling concept.
*Syntax for TRY .. ENDTRY construct
TRY.
    CALL METHOD o1->m1.
    PERFORM f1.
CATCH cx_root. "Handler for all exceptions
       " ABAP code(What to do when error occures)........
ENDTRY.
FORM f1 RAISING cx_my.
TRY.
    IF ...... RAISE EXCEPTION TYPE cx_my2. ENDIF.
      CALL METHOD o1->m3.
CATCH cx_my1 cx_my3 INTO ex.
    RAISE EXCEPTION TYPE cx_my4.
CATCH cx_my4.
     "Handler for exceptions of type cx_my4
     " ABAP code(What to do when error occures)........
CLEANUP.
     "Cleanup section, used to restore to a consistant state
     " ABAP code........
ENDTRY.
ENDFORM.
Reward if helpful..
Sowjanya.

Can't update Apps, now getting new error message

It's been weeks since I've been able to update my Apps on either my iPod touch, or from iTunes. In iTunes previously, it would say that there were updates available, but then when I clicked on Update it would tell me that there were no updates available, now I'm getting a new error message that says "You can not update this software since you have not owned the major version of this software." WHAT???? These are mostly free apps, and the others I paid for. I'm so tired of this. And on my iPod touch I get "Can not connect to the iTunes store," even though I can make purchases, download podcasts, etc. Any ideas. Thanks so much.

it's strange because not all update have this issue. I can update some free and paid apps ( over 10 update was succeful) and few (4-5)others have this problem and cannot be updated. Itunes didnt been updated since beginning of this issue.
For the free one who cannot be updated, i just deleted already owned in itunes and re-downloaded updated version again without any problem.But for my paid apps, i will need to wait That apple fix it.
I googled and i see this problem already happen in 2007 or 2008 but i just found problem report, no solution. I will try to spend couple minute to find out on google and try to call apple or contact apple expert on the web there tomorrow: http://www.apple.com/support/expert/ and come back to tell what they said. If someone found please post !!

New error after recent java update on Mac

Hi,
We run a learning management system that uses LiveConnect to communicate between the elearning module and the LMS.
Recently all sorts of things started going wrong, around the time of the latest update.
I just tried it from my Leopard-OS imac running Safari 3.1.2
Learning modules will no longer launch, and the following errors show up in the console.
If I launch from Safari, I get:
Java Plug-in 1.5.0
Using JRE version 1.5.0_13 Java HotSpot(TM) Client VM
User home directory = /Users/ellenm1
network: Loading user-defined proxy configuration
network: Done.
network: Loading proxy configuration from Netscape Navigator
network: Done.
network: Loading direct proxy configuration
network: Done.
network: Proxy Configuration: No proxy
basic: Cache is enabled
basic: Location: /Users/ellenm1/Library/Caches/Java/cache/javapi/v1.0
basic: Maximum size: unlimited
basic: Compression level: 0
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@9444d1, refcount=1
basic: Loading applet/u2026
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@4ac216
basic: Initializing applet/u2026
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@9444d1, refcount=2
basic: Releasing classloader: sun.plugin.ClassLoaderInfo@9444d1, refcount=1
basic: Starting applet
basic: Loading http://lmserver.com/pathto/apiadapter_lms.jar from cache
basic: No certificate info, this is unsigned JAR file.
java.net.MalformedURLException
     at java.net.URL.<init>(URL.java:601)
     at java.net.URL.<init>(URL.java:464)
     at java.net.URL.<init>(URL.java:413)
     at org.adl.lms.client.DocentAPIAdapterApplet.initServlet(Unknown Source)
     at org.adl.lms.client.APIAdapterApplet.init(Unknown Source)
     at org.adl.lms.client.DocentAPIAdapterApplet.init(Unknown Source)
     at sun.applet.AppletPanel.run(AppletPanel.java:380)
     at java.lang.Thread.run(Thread.java:613)
liveconnect: Java: Obj is <org.adl.lms.client.DocentAPIAdapterApplet>
liveconnect: Java: method is <public java.util.Properties org.adl.lms.client.DocentAPIAdapterApplet.pingLMS()>
liveconnect: Java: method has 0 arguments.
liveconnect: JavaScript: caller and callee have same origin
liveconnect: JavaScript: default security policy = http://lmserver.com/pathto/docentisapi.dll/lms,APPSERVER01.ourserver.com,2151/SQN%3D-57596664/
Exception caught In DocentServletProxy::DoHACPRequest()
null
liveconnect: Java: Returning a null

We're facing the same trouble, we have a very similar stack trace and the error occurs only with Safari v 3.2.1; no firewalls and no domains, the issue is related with this snippet of java applet code compiled against jdk v 1.4.12:
new PropertyResourceBundle(MyToolbar.class.getResourceAsStream("toolbar.properties"));
where the execution of getResourceAsStream throws a NPE.
"toolbar.properties" is a property file within the applet jar, the applet tries to acces such file with the execution of this line but fails.
This error happens with Safari and Google Chrome,
while it works fine with IE7, Firefox 2 and 3
the stacktrace contains the following lines:
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at sun.plugin.javascript.JSInvoke.invoke(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor3.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at sun.plugin.javascript.JSClassLoader.invoke(Unknown Source)
     at sun.plugin.liveconnect.PrivilegedCallMethodAction.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.plugin.liveconnect.SecureInvocation$2.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.plugin.liveconnect.SecureInvocation.CallMethod(Unknown Source)
hope someone can help
thanks,
Paolo

New Error

Similar Messages

Maybe you are looking for