New Exchange setup and communication with current Firstclass email system

So I have a very interesting scenario....We plan to move to MS Exchange 2013 from a open source email called Firstclass.....we have one domain (we'll call it contoso.com for this example), we had a previous domain setup of contoso-school.org as well......our
current email system and acceptable addresses are both of those domain addresses....they are local DNS domains to us.....so for our Exchange we want these addresses to be acceptable in Exchange as well....but we also are going to add a new domain name to Exchange
which would be main email address....which would be contososchool.com....however the domain is owned by 3rd party that runs our website with domain name....so was not going to add to our DNS.
I have exchange setup and working as far as being able to send receive external emails and also have our current Firstclass email system able to send email to exchange users....but I cannot get exchange to email the firstclass account....anytime I try, it
just immediately shows up under my exchange account (there servers are all apart of the contoso.com domain).....I tried without having the other domain names added in as Acceptable domains but it still does the same thing....I think because the Exchange server
is part of the same domain as other email system its causing this...
Has anyone dealt with this type of situation...I hope I explained it ok
Thanks

Similar Messages

Sender file adapter, file existence check in archive folder if exists rename the same and proceed with current file

Dear SAP Gurus
Interface flow:
File --> File and RFC.
We have a requirment where PI needs to check the file existency in archive folder and if there is a file already exists with same name we need to rename that file and archive the current file as is...
Note* Customer don't want to add time stamp!!!!
For ex today first message processed with file name "UBMO_delta20140626.xml" and archived as is- UBMO_delta20140626.xml
and customer sends a second file on the same day with same name(UBMO_delta20140626.xml) in this case before archiving PI needs to check whether there is a file exists already in archive folder or not if there is, then it should rename the same like(UBMO_delta20140626_1.xml) and proceed with current message processing and archive the same name(UBMO_delta20140626.xml).
Many Thanks in advance...
Nagesh

Hi Nagesh,
I think you can use the feature of run operating system command before message processing. you can refer the below wiki for information.
SAP XI File Adapter OS Command Line Feature - Process Integration - SCN Wiki
regards,
Harish

Work on New Part Review and Release (NPRR), a bolt-on system (extension)...

hi.................
i need to know detail information about this and need to generate RICE components....
" Work on New Part Review and Release (NPRR), a bolt-on system (extension)..........
Only after approval from NPRR, the item gets transferred to Oracle EBS..."
Can u help me in this..............

prices pricestamp = new prices();
for(int c=0; c < stringtext.length-1; c+)
mmm=stringtext[c];
mmm=mmm.trim();
ccc=mmm.split("\\s");
pricestamp.time=Integer.parseInt(ccc[0]);
pricestamp.price=Double.parseDouble(ccc[1]);
data.add(pricestamp);
}This is definitely wrong. You have only created one instance of pricestamp and you just keep overwriting it with new values. You need to put the new inside the loop to create a new instance for each row.
Also I doubt you really mean .length - 1, that doesn't include the last row.
Style wise:
Class names should always start with capital letters, fields and variable always with lower case letters. These conventions aren't imposed by the compiler but are established practice, and make your code a lot easier to follow. Use "camel case" to divide you names into words e.g. priceStamp
When using single letter names for integer indices people tend to expect i through n. This is a historical thing, dating back to FORTRAN.

I'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?

i'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?

There isn't a way directly in Mail.
Here's what google says: http://www.google.com/search?client=safari&rls=en&q=mac+os+x+mail+delayed+send&i e=UTF-8&oe=UTF-8

I mant to make my rescue email my primary email and delete my current primary email, How do I do that?

I just want to make my rescue email my primary email and delete the current primary email. How do I do that?

You will first need to remove it as your rescue email address, which you can do via the Password And Security section of your account on http://appleid.apple.com : http://support.apple.com/kb/HT5620
After you've done that log out of that site, and then either log back in and try putting it as your primary email address, or you can do it by logging into the account via the Store > View Account menu option on your computer's iTunes or by tapping on the id in Settings > iTunes & App Store on your phone
After changing your primary email address : Apple ID: What to do after you change your Apple ID

Exchange 2007 and 2010 with Unity Connection 8.6

Hi all,
We have unity connection 8.6 and exchange 2007 currently in place and runnign fine. I am ready to start migrating mailboxes over to our new exchange 2010 farm and as such we will be in co-exsistance with exchange 2007 and 2010 for awhile. What are the steps or procdures to also include exchange 2010 with the 2007 in unity connections? Currently under Smart Host is the IP address of our exchange 2007 server.
Thank you.

Hi,
This depends on how you plan on performing the migration. I would suggest the following:
-Creating a new unified messaging service for Exch 2010. You can re-use the same service account name as long as you completed the configuration steps for that integration.
-As you move over user's mailboxes from 2007 to 2010, you can delete the 2007 UM service and add the new 2010 UM service. If you want to change many users at a time you'll need to use bulk administration to change them. If you use BAT to change accounts, see the link below where I have listed them out for another CSC user.
-You can change the Smart Host setting once you have configured the Exch 2010 enviornment to handle your main corporate mail (changing the MX records to point to a 2010 Edge Transport).
Changing the UM service with BAT:
https://supportforums.cisco.com/message/3572200#3572200
Good luck.

WRT160N v3: Cannot connect to router setup web page with current Firefox or IE

Every time I try to connect to the admin page of my router, I get "The connection to the server was reset while the page was loading." This happens with FIrefox 11, and started when I upgraded to 8 or 9. A machine running FF 3.6 does not exhibit this problem; I get right in. What IE 9 says is "Internet Explorer cannot display the webpage" (after complaining about the expired certificate).
I ran Wireshark to see if I could learn anything, but all I could figure out was this:
https handshake was OK.
First TLS packet is received by router, which then immediately issues a reset and ends the connection. I don't know why.
Has anyone seen this? or have I got a screwed up configuration (or router)?
Solved!
Go to Solution.

castor wrote:
"The connection has timed out", seems to affect servers at MozilllaZine, for Firefox on Windows...
I'm not sure what this has to do with my problem; my difficulty is only in trying to talk to the router configuration page. Everything else works just fine.
~~ Tools > Options
~~ Advanced (tab) -> Network (tab) > "Setting"
~~ (X) Auto-detect proxy setting for this network
I have "use system proxy settings". Since this is a home network and I'm not using a software proxy on my machine, I know there is nothing between me and the router.
Second, let me know if you have enabled 'https' in the router management page. What is the IP address on the computer when connected to the router. To check the IP address that you are getting from the Router... You can check the IP address in the following manner:
# Click on Start -> All Programs -> Accessories -> Command Prompt.
# A black pop up box should come up, type: "ipconfig /all" …
This is not going the right direction, but to satisfy your curiosity:
   IPv4 Address. . . . . . . . . . . : 10.244.122.142(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.244.122.1
   DHCP Server . . . . . . . . . . . : 10.244.122.1
These are correct. (Since my telco DSL has me behind its own NAT router and has assigned my modem address 192.168.1.2, so I could not use Cisco/Linksys's manufacturer default address settings.)
There check the IP address and Default Gateway under LAN….
If it provides the valid IP address then try to connect the router to a different computer and then try to open the router setup page...
I have a linux virtual host (thanks to VMware) now running Firefox 5, and it can talk to the router setup page just fine, once I accept and save the invalid certificate the router presents, at https://10.244.122.1. So I conclude the problem is to do with the later version of Firefox (currently 11, but I had this problem with 10 and maybe with 8 and 9).

How do I delet photos from my new iPad 3 and replace with others?

How do I delet photos from my new iPad 3 and replace them with others? The current photos were loaded from my computer when I connected the new iPad 3 to it, but they are not the ones I want.

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

A better way to initialize imported taskflows and BCs with current user

Hello.
I'm currently developing a composite application containing one main application and a number of subapplications (modules) packed in adflibs.
Main application has a side menu and a dynamic region, showing taskflows (on fragments) from adflibs.
Main application is configured with adf security and it has current login and queries his ID. I would like main application to tell modules current user ID rather than each module to find out current user on their own.
So there is currentUserID input parameter required in each imported taskflow. And my question is what is a better way to process this ID in the modules?
What I have previously done is:
I've created a custom BC classes layer, VOImpl and VORowImpl have getIdUser() method. This method reads currentUserID parameter from pageFlowScope where the taskflow is storing the parameter.
Top-level View Objects have :IdUser query parameter and corresponding bind variable. This bind variable has value="source.getIdUser()", calling the method from custom VO class.
This way works fine but here and there I read that it is a bad practice to access pageFlowScope from BCs.
I could agree with this in case someone could share a better way.
So what is a good practice?
Thanks.
ADF/JDev 11.1.2.3 - 12

Why don't you use adf security for this? Read Oracle ADF: Security for Everyone which give you an overview and sample on how to implement this.
Timo

New to LiveCycle and question on Current Date box.

Hi all,
I'm very new to designer and I'm trying to put in a Current Date box. The issue I have is that it displays as 2/26/09 and I need it to display as February 26, 2009.
I've gone into the patterns and enter that, but it doesn't change anything.
When I drag the Current Date box into the form, I get a message that says "This object has settings that this form does not support. These settings are removed when the object is placed on the form."
What is this? I made this form off of an existing PDF file that has nothing in it.
Thanks for any help,
Jason

Ah, ok I see what's going on - I didn't realize there was a prebuilt current date object.
The reason it doesn't change the format from the Patterns is because it is using a script like the one I gave you.
You need to open the Script Editor window (Window->Script Editor -- I think its default location is just under the toolbars above the page you're working on) then when you click on the object the Script Editor will list scripts attached to the object.
You need to change the script where it says DateFmt(1) to DateFmt(3).

New slide function and working with proxies

I just added a new page to my 10.1.2 features to include new slide functions and also how to work with proxies in the latest version.
http://www.fcpxbook.com/updates/1012/1012_3.html

You need to run software update AFTER you connect the keyboard.
You will then get an update which makes the keys work on the Macbook pro.
I am running it on MBP 2.4 (latest).
I cannot get it to work though on iBook G4 800Mhz. Posted thread already on that forum.

If I buy a new MacBook will it ship with the ios7 operating system?

If I order a new MacBook will it ship with the iOS 7 operating system?

No; iOS 7 is for iOS devices, not Macs.
(89897)

I tried creating a new apple id and mistakenly typed a wrong Email address which might be someone else's,my bank acc info has also been recorded, nd now a verification Email has been sent to that wrong Email address.I want to revert it.need help pls

I tried creating a new apple id and typed a wrong Email address which might be someone else's,my bank acc info has also been recorded, nd now a verification Email has been sent to that wrong Email address.I want to revert it.need help pls

Apple ID security issues -
Account security issues almost always require you to speak directly to an Apple representative to securely establish your identity as the account holder. You can set it up so that Apple calls you, either immediately or at a time convenient to you.
1. Go to http://www.apple.com/support/appleid/
2. Choose Contact Support and click Contact Us
3. Choose Other Apple ID Topics and choose the appropriate topic for your issue (Security questions or password)
4. Choose, No Thanks, Continue
5. Choose the best method for you for contacting Apple

New to iweb (and mac) with issues publishing basic site

Hi All,
I have used one of the templates in iweb. I have changed some of the layouts, fonts (made sure they were web fonts) etc and reasonably happy with how the site looks in iweb.
I have not uploaded the site to the web, I have only saved it to a local directory to view it. I am having issues with the formating specifically the shadows on the boxes
I have just posted the welcome page below (original, mozilla & Safari) and hope someone can let me know what I am doing wrong.
Thanks
iweb
Image: !http://img.photobucket.com/albums/v474/Christobella/Picture2.png!
Mozilla - not too bad
Image: !http://img.photobucket.com/albums/v474/Christobella/mozilla.jpg!
safari - no idea what is going on here!!
Image: !http://img.photobucket.com/albums/v474/Christobella/Picture3.png!

Christobel ~ Welcome to the discussions. This is just a tip: Posting large images directly in these forums can make the thread difficult to read — in this case, the thread is wider. However, a clickable thumbnail can be posted without actually generating another small thumbnail image — instead the original is scaled:
< Click to view full size
The above was posted using this HTML:
<blockquote style="padding-left: 50px;">
<a href="/___sbsstatic___/migration-images/100/10070598-1.png" target="_blank"><img src="/___sbsstatic___/migration-images/100/10070598-1.png" title=" Will open in new window " width="150"></a><span style="color:#006699; padding-left: 2em;">< <i>Click to view full size</i></span></blockquote>

Ok so I was talked into switching to a new iphone 5 and loosing my current grandfathered unlimited data on my Iphone 4 and being talked into using the share everything plan.

So I switched to a share everything plan based on the recommendations of a sales rep. he told me I was using less than 2 gigs of data on my phone. So I upgrade my phone and switch plans. my biggest complaint is I asked how much for each line and I was told about the smart phones and then I have a non smart phone that I am now being charged $30 per month for. This phone uses no data and maybe sends a text message about once every month. I was paying $9.99 for the phone previously. And somehow I used more than 10 gb of data, when the rep did the analysis he said 8 was ideal. Last month I had an overage of $45 dollars and went over 10 GB. Not sure how any of this is better Verizon. I upgraded to the 10 GB of data plan for more money thinking it was going to take care of the problem, but 7 days before my billing cycle was over. I turned off my hotspot completely and told my husband he could only text and use the phone for calls. no internet or apps. I did the same. I don't understand how we could possibly be using so much more data now we have switched to this new share everything plan. Now what is frustrating is I can't even look up my bill and its 3 days after my billing cycle. I want to know if I am going to have another overage because of the tracking usage issue. What gives Verizon? You used to be so good. I have been a customer with this company before it was Verizon and stayed because I have never had a problem. Speaking of the non smart phone I am now paying an arm and a leg for... that phone where its located in the state didn't have service for almost 3 days. They said lightning hit a tower but it was fixed. Crappy job of fixing in my opinion. Do I get a rebate for the 3 days of no service and the sketchy service before that? Man This makes me so frustrated. I want to pay the outrageous cancellation fee and just be without internet and get a pay as you go phone from Walmart. Come on Verizon step up your game. Are you really getting to big to care about giving your customers good plans for a decent price?

You have fallen for the great Verizon Wireless Lie, most customers don't use over 2Gb and its a better plan, and unlimited is unsustainable yada yada yada.
However your choices were getting new devices for cheap so if you paid full price for your device at $700 each, you would have kept unlimited and paid no $30 upgrade fee. Per line.
Now add up the additional cost of that data usage and it is way over the cost of what paying full price would have cost you.
and being in a contract with an early termination fee it all adds up.
Verizon claims unlimited data is unsustainable, but you can see its sustainable only when you get charged mucho bucks in $10-$15 overages per GB.
Good Luck

New Exchange setup and communication with current Firstclass email system

Similar Messages

Maybe you are looking for