New External Drive .. NEED HELP PLZ

Hi
i just plugin (usig USB) my new external hard drive ( 160 GB )
and i`m trying to copy some files to it
and it shows this msg
" the item ... could not be moved because new volume cannot be modified "
so how can i make it ? and also it shows the new volume for read only .. how can i make it read and wirte ??
thnx

Yes, I think so. You can create as many partitions as you like - if you look at that document, the second part shows how to partiton the drive into several partitions - just do it as shown but format one of them FAT32 or NTFS
But....
I don't know if a PC can read a single Fat32 or NTFS partition from a drive partitioned using GUID. I think it would have to be Master Boot Record Scheme in which case, you would need Fat 32 all the way.
As you have to wipe the drive anyway, it won't hurt to try I suppose. In the worst case you can always reformat it back to OSX only or Fat 32 so that the PC and Mac can read it (NTFS if you only need the mac to be able to read it).
From a performance perspective I'd use two drives. To swap data between a pc and mac just network them rather than trying to make one drive do two jobs.
I hope that helps,
best of luck.

Similar Messages

Moved all content to external drives need help!

ok so i copied all my music, photos and movies to external drives ..im now running two 1 terabyte drives for all this..have over 350 movies and 300gb of music now evertime i have itunes open it just runs..it doesnt say what it is doing but for over 2 weeks now when itunes is open it takes up 50% of my processor and runs very slow..is there something i still need to do here?
pls help..thanks robert

ok so i copied all my music, photos and movies to external drives ..im now running two 1 terabyte drives for all this..have over 350 movies and 300gb of music now evertime i have itunes open it just runs..it doesnt say what it is doing but for over 2 weeks now when itunes is open it takes up 50% of my processor and runs very slow..is there something i still need to do here?
pls help..thanks robert

New hard drive need help

I have the dv4 and the hard drive crashed a while back. Just got a new hard drive for it and installed it and I get a blackscreen with a blinking cursor. I've read some other posts and am currently running the hard drive test through the f10 page. I have a windows 7 disk in the disk drive.wouldn't it load up automatically?
This question was solved.
View Solution.

Hi,
Try the following.
Remove the Windows 7 installation disc and shutdown the notebook.
Tap away at the esc key as you start the notebook to enter the Start-up Menu. Insert the Windows 7 installation disc. Select the Boot Options menu ( usually f9 ). Use the arrow keys to highlight the CD/DVD drive and hit enter - if prompted to 'Press any key to continue......', do so.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I am setting up a new iMac and need help syncing files to Dropbox. On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox. I can't remember how I set this up. Any help?

I am setting up a new iMac and need help syncing files to Dropbox. On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox. I can't remember how I set this up. Any help?

The way that Dropbox works is that it keeps a copy of all your files in your local Dropbox folder on your hard drive (which is, by default, directly under your home folder). Adding files to that folder will sync them to the Dropbox server.
You do of course have to download the Dropbox application to enable this (download link at the top right of http://dropbox.com ).
Matt

How to point Itunes to a new location where music is stored Cannot locate music now it is on an external drive PLEASE HELP!!!!

Background Info
i have recently got rid of my Windows machine an am now using my MacBook as my main machine
On the old windows Desktop   i had my music set up as follows
Itunes libary information:
C:\Documents and settings\Lee Robinson\My Documents\My Music\
all of the Music files were stored on the PC as follows
G:\Music\My Music
Before i got rid of the machine i backed up all of my music and my iTunes libary files as follows to a External USB Harddrive that is now connected to my mac
Music Located @
/Volumes/AFRO-PORT/My Music
the iTunes Libary is located at the following
/Volumes/AFRO-PORT/My Music/iTunes
what i then did was to copy my itunes libary files at /Volumes/AFRO-PORT/My Music/iTunes to my local Mac machine .....
/Users/Afroboy/Music
Problem
Now when i fire up Itunes, i have all my playlists, ratings abum art etc...... but the problem i have is that itunes cannot locate any of the files. I guess that this is because my entire libary is still pointing to
G:\Music\My Music - as on my old windows PC
How do i tell itunes that this is no longer where i keep my music and for the actual MP3 files itself it needs to look at the following path
/Volumes/AFRO-PORT/My Music
... all file structures within these 2 file directories remain the same
I would really appreciate the heklp- my music collection is quite big and i dont want to loose any of the work i have done building it up over the past 5 years
Cheers
LR

Hi - thanks for the response
yes thats right, i have always kept my itunes folder and the directory containing all of my actual media seperate
all of the Music files were stored on the PC as follows:
G:\Music\My Music
Itunes libary information:
C:\Documents and settings\Lee Robinson\My Documents\My Music\
Your quite right, doing the above method that i have, turns it really messy when you when you try to move your entire collection. i saw this article earlier today
iTunes: How to move your music to a new computer - http://support.apple.com/kb/HT4527
..........wish i followed it before hand
The only Semi work arond i have found is to go to File> Add libary.... and brows to what is now my new external drive with all my music on /Volumes/AFRO-PORT/My Music/ .
Once the import was complete it effectivly dupicated my entire libary - So i then went to
File > Display Duplicates to show duplicate items, sorted by date and removed all the duplicate items
.... So far seems to have worked ok however i have lost my play lists, their all on my iPod anyway so all seems fine now
As you said iTunes wants you to do thinngs in a certian way and it certianly makes you pay if you dont. So now my question is, so i dont have this problem in the future..... do i
A) Manually move all of my Music files to my iTunes Liabry and have everything in one folder (If i move manually where do i need to copy all my files to?)
B) Start from Scratch and let iTunes do it, so i have everything on the external disk

I need to format a new external drive, then need to copy old external to new external

I need to format a new external drive, then need to copy old external to new external

Use the Disk Utility in the /Applications/Utilities/ folder to erase the new drive. If the old external drive doesn't contain a bootable Mac OS X system or a Time Machine backup, you can just drag its contents to the new drive. If it does, use software such as Carbon Copy Cloner or SuperDuper.
(69605)

Can I transfer photos from old macbook to iMac and put all photos on a new external drive without losing any photos?

Had to purchase new Macbook so all devices could sync with Yosemite. I use iMAC and Macbook with iPhone, etc. I have many photos over years and do scrapbooking. I want to preserve my pix on an external hard drive and organize them. I am currently using external drive on iMAC and a separate one on Macbook that is outdated. I use them with TM for backup. Can I transfer pix data only to the iMAC via a transfer cable and then send all photos to new external drive for access and safe storage? I am confused about backup not preserving my photos. Help please me transfer and save my pix and properly set up my external for access. Thanks a bunch!

connie,
I assume you are storing your photos in an iPhoto library, since you are asking in the iPhoto forum?
if you want to store your iPhoto library on an external drive and keep them safe, you need two external drives. One drive to store the working copy of the photo library, that you are using to work with your photos, and one drive for time machine to make back copies of your iPhoto library.
Can I transfer pix data only to the iMAC via a transfer cable and then send all photos to new external drive for access and safe storage?
You could simply plug your new drive into the MacBook and copy the library from the old drive to the new. Then connect the new drive to your iMac and use the iPhoto library there.
Make sure, your new drive has the correct file system - MacOS Extended (Journaled) . See this link: iPhoto: Issues with FAT32-formatted drives
-- Léonie

How to move Event (not necessarily connected to Projects ) and projects to new external drive

I am running Snow Leopard 10.6.8 and iMovie11 9.0.4 have a had very stressful time trying to clear down the Movies folder from my internal drive and get it across to a new external hard drive, as my 700gb drive on my 2009 iMac is practically full. I have taken a full back-up and also created a new 1.5 TB partition on the external drive. However I do not know how to get the Events and Projects across, and for iMovie to know that every thing is now on the new drive.
Initially I copied the 2 folders using finder, which seemingly worked but then I discovered that iMovie did not display the the new events, so I deleted the 2 folders from the external drive and tried manually moving the events in iMovie. This was very slow, with lots of spinning wheels and eventually iMovie crashed. So I moved the new Event copies I did manage to create into trash, but still iMovie was crashing.
I then, thinking something had become corrupted, I tried to restore the Events folder and Projects folder from my backup, but that did not work as I got a message saying the there was not enough space to do the copies (why does it need extra space as I assume it would be overwriting the existing folders ?). So in desperation I did some forum searching and ended up deleting the com.apple.iApps.plist. Now iMovie seems to be working fine, and is displaying al the events from my internal drive (I have ejected all other drives), and I am back to square one (hopefully), however for some reason the 'month' folders I had previously created in each Event 'Year' have disappeared and all the, for example 2013 events, are now under the 2013 folder with no Month sub folders( I assume this is something to do with the preferences I had deleted ?)
I am hoping someone can direct me on the right path for getting the Events (not all of which are used in Projects) and Projects across to the new external drive, so I can free up space on the internal drive (and install Mountain Lion - my end goal).
I have been trying to do all this since 0600 this morning, so if anyome can help it would be very much appreciated.
Jim (now grabbing a much needed beer !)

Do the external drive show up in iMovie 11?? I just drag and drop in iMovie and don't touch it or change in finder.

New External Drive connected to Time Capsule moving files problem

I have a late 2009 13" unibody MacBook Pro, that I primarily use for video editing/converting. I use my Time Capsule as a network through which I can connect to my external hard drives via USB for videos and such. I've used at least two other external hard drives along with my Time Capsule for a year and a half with very few problems, aside from the inevitable crash of one. Before yesterday, I had a 1TB Western Digital MyBook (http://www.wdc.com/en/products/products.aspx?id=210) and a 2TB Verbatim Desktop HD (http://www.verbatim.com/prod/hard-drives/desktop/usb-2.0/) connected through my 1TB Time Capsule and aside from the Verbatim drive being rather sluggish most of the time, everything was working fine.
Yesterday, I got a new external drive, an iOmega MiniMax 2TB (http://go.iomega.com/en-us/products/external-hard-drive-desktop/ultramax-minimax /minimax800/?partner=4760). I spent yesterday and most of today moving files around and whatnot through a wired connection (iOmega via firewire 800, Verbatim via USB, MyBook via USB, and Time Capsule via Ethernet), and everything moved quickly and without any problems.
I hooked my Time Capsule up to my modem, plugged in the iOmega and Verbatim drives via USB to the TC, and started my laptop. When I opened the drives, everything was working fine... And then I tried to move a file to the iOmega drive... I was moving an episode of The Killing. I dragged it into the folder and went to Safari to look something up and suddenly realized ten minutes later that I still hadn't heard the noise telling me that the file had finished. I looked at the move dialogue box and it said "156.8 MB of 323.8 MB - About 10 Seconds". I watched it for another ten minutes and it didn't move. So I clicked cancel move and the rainbow wheel of death came up and I had to force reboot my computer.
When I restarted, I opened up finder to access the drives through my Time Capsule, and it "failed to connect" to my Time Capsule. So I went back into my office to flip the switch on the surge protector in order to restart the process. I turned on my computer and I had no problem accessing my hard drives... Until I tried to move an episode of United States of Tara into the iOmega hard drive. This time, it said, "192.5 MB of 202.6 MB - About 5 Seconds" and completely stopped moving again. And the same thing happened when I clicked the little grey "x" to cancel the move.
I repeated the process several more times with no luck. Then I thought it might help to see if it does the same thing with documents. So I dragged just a random document to the iOmega and it took about 30 seconds, but it did it successfully. So I tried to move the episode of The Killing again and I let it go for, like, 25-30 minutes. After this time, I got a notification from finder saying, "Finder cannot complete the operation because some data in "[the file]" can't be read or written. (Error Code -36)". Then when I went back into the "Shared" part of the sidebar to go back into my Time Capsule folder, it said "Connection Failed"
So what exactly does this mean? Are the Time Capsule and iOmega not compatible? Can I only move the files through a wired connection [which would be unfortunate]? Do I need to rejigger the USB configuration? Is the error code just for these two episodes and it's just a random coincidence that it happened the day after I got a new drive?
Thanks for any help anyone can give me!
- Alex

I have attached the macbook to the tc via ethernet cable. Should I turn off my wireless connection or will itunes recognize to go with the faster connection on it's own?
You MBP will try to connect based on the order of the list of network devices on the System Preferences > Network window. If Ethernet is not at the top of the list, then go ahead and temporarily disable AirPort.
After all this is done will the wireless connection be fast enough for normal itunes operation?
For audio streaming it should be, but just be aware that your iTunes host will have to get the audio source wirelessly from the TC, which in turn will have to get the data from the USB hard drive. Finally, the iTunes host will have to wirelessly stream the iTunes audio via AirTunes to the AirPort Express.

Using Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".

I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!

I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
Could be you have the wrong cd/dvd. The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
Not sure. Could be your machine does not support the startup manager. You would think the machine would ignore the key.
Where did you get the dvd? What is the number on the DVD?
What machine do you have anyway?
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )

How do I tell Time Machine to add a new external drive to be backed up?

How do I tell Time Machine to add a new external drive to be backed up? I have an external drive with data I need to add to my overall back up with what's on my mac. I have a separate drive already active as the Time Machine backup disk. I can see how to EXCLUDE disks, but how do I ADD that new external drive to regular backups?
I have 10.8.5 system on my Mac laptop.

Remove the drive from the list of items set to be excluded. It needs to be formatted as Mac OS Extended (Journaled) for this to be possible.
(110504)

Updated to Mavericks OS X but can't use my external drive by WD My Passport. The Mac reads it but I can't add/remove files to the external drive. Help?!

Updated to Mavericks OS X but can't use my external drive by WD My Passport. The Mac reads it but I can't add/remove files to the external drive. Help?!
The WD My Passport, I purchased back in early December 2013 & I just used it the other day after I updated my Macbook... & of course it says in the online manual it works for Mac Lion, Mountain Lion, Snow Leopard but not this new Maverick update. Is there anything I can do?

I like the free demo of SuperDuper to make clones. It's free, Tiger and Leopard ready and is easy to use. If you buy the full version you can do incremental backups.
You should use Disk Utility to do a Disk Repair, as shown in this link, booted up on your install disk, before you make a clone of it.
I then partition my external disk, in Disk Utility, with a partition that is the same size , actually a tad bigger, as my system disk. I then use SuperDuper to clone my system disk over to that partition.
With a clone on an external FireWire drive (USB drives are not bootable on some Macs) you can bootup on it to do your repairs or just run your Mac anytime you have trouble with your main drive. Be careful, there are a few external FireWire drives out there that are not bootable on Macs. Check the drive's manual to be sure.
 DALE

Lightroom 3 not finding my images on new External Drive I copied them in the MAC finder..bad I know

I recently bought a larger external drive and did a copy of all my files, including my catalog, via my MAc finder..I know now this was a clumsy way to do things.
I don't want to go through another copy session within LR.lotsa files.
I've done "find missing photos" but now I don't have a clue as to what to do.
Right clicking doesn't show anything relevant.
Sort of stuck..help?
Thanks,
Pete

None of that right clicking was working...except for "find missing images"//which it did..but then I had a collection of "missing images" and had no clue what to do with them
Last night before I went to bed I decided to change the name of my new external drive to the exact same name as the drive I copied the images from....and it worked perfectly. Lightroom grabbed everything and I was running again.
Im a bit uneasy about that solution tho..

How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.

How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.
When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial.

Hi I'd like to jump in here. Your app showed me this:
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
          Destinations:
                    Plastic Wrapper [Local] (Last used)
                    Total size: 999.86 GB
                    Total number of backups: 64
                    Oldest backup: 2013-07-24 23:25:11 +0000
                    Last backup: 2013-11-17 01:40:47 +0000
                    Size of backup disk: Too small
                              Backup size 999.86 GB < (Disk used 453.81 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
          /sbin excluded from backup!
          /usr excluded from backup!
          /System excluded from backup!
          /bin excluded from backup!
          /private excluded from backup!
          /Library excluded from backup!
          /Applications excluded from backup!
Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
Thanks,
Darcy

External hard drive that stored music has crashed. How can I safely get my songs from my I Pod back onto computer in a new external drive?

External hard drive that stored music has crashed. How can I safely get my songs from my I Pod back onto computer into a new external drive?

See this older post from another forum member Zevoneer discussing different ways to copy content from your iPod back to your PC.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

My time machine backup external hard drive has failed. I have a newer external drive already connected to my MAC but can't figure out how to get Time Machine to set up on it?

My time machine backup external hard drive has failed. I have a newer external drive already connected to my MAC but can't figure out how to get Time Machine to set up on it

http://pondini.org/TM/21.html

New External Drive .. NEED HELP PLZ

Similar Messages

Maybe you are looking for