New feature on update 10.4.6

I always run permissions verify and repair after an update, usually displayed are all the information about what has changed. When I ran permissions repair after this update, this information is no longer displayed. Is this something new?
Power Book 17 inch 1.5 ghrz processor Mac OS X (10.4.6) 2 gigs of Ram, FCHD, ADOBE CS, QT7

scb's disdain for Repair Permissions is, let's say, legendary, but he's correct that most suggestions about running Repair Permissions are made reflexively without actual regard for the problem in a post. But if you want evidence that Apple didn't write the code into Disk Utility just for laughs, after updating to 10.4.6, install the latest Flash player update --- I can tell you firsthand that triggered a couple of permissions repairs. Misset permnissions can cause real problems.
In addition to the Flash Player installer, if you ever install device drivers from HP or anything at all from Adobe, you will get actual permissions repairs. Not all third-party applications trample on Apple software file permissions (keep in mind that Repair Permissions works on Apple's software), but some certainly do.
If you have any Macs with older OS X versions in use, Repair Permissions may make repairs on Apple's own software as well --- I've seen this several times updating iTunes under OS X 10.2.8, for instance. If all your Apple software is up to date, you should never see Repair Permissions do anything after installing Apple software.
The more recent your OS X version, the less you'll need to run Repair Permissions. On the other hand, the more recent the version of Disk Utility you use, the less time it takes to actually run Repair Permissions (there's a noticable difference between 10.2.8 and 10.4.6 on similar sized hard drives). I don't know of any actual statistics on what percentage of times posters told to run Repair Permissions have reported that it helped or that it did nothing, but it's a non-trivial percentage either way. If you run Repair Permissions from the hard drive (or from an OS X Install disc with OS X 10.3.4 or later), Repair Permissions will properly read the Recipt packages on the hard drive to set permissions. Running Repair Permissions will not magically fix any and all problems, but as intended it won't hurt anything, either.

Similar Messages

List of new features in update?

It would have been nice if Apple posted a feature list of what came with the new upgrade. I'm a little worried that a new feature such as buying ringtones came before contact search, contact categories, cut and paste or synchronization of notes. Does anyone else feel like Apple's priorities for feature upgrades is a little off the mark?
They added the ability to rotate the screen while viewing attachments, but you still can view a regular email in rotated mode. Is the API they have for their own phone so difficult to work with that they can't add tons of features easily.
I mean you can view excel and word documents which are attached to emails, but you can't sync documents from your computer? Even if they were read only, it would be a fantastic feature.
I've been pretty happy with the iPhone so far, but it seems like the other devices out there are going to be much more feature rich within the next couple of months.

Right now Apple is busy fixing glitches, releasing as much new software as possible and preparing the new SDK for the iPhone so cut them some slack. If your not happy with your phone, feel free to return it. You can request all your feature here, http://www.apple.com/feedback/iphone.html

New features and updates with iPhone iOS 7.0.06?

I wonder exactly what the new features is on the iOS 7.0.06?
This is the only information I get if I google it.
https://encrypted.google.com/#q=new+features+on+ios+7.0.6

shldr2thewheel wrote:
AKAJEF wrote:
I wonder exactly what the new features is on the iOS 7.0.06?
so read one of the links and read all about it.
Hehe, but it's not definite. It should be somewhere at Apple.com...?

Set Show tag for Movies gives sub-menus, new feature to update 2.3?

I heard some people mention using playlist for reducing the size of the movies list, but I've noticed that if you set the Show tag for movies (which I have already done for some of mine where the movies are part of a series - for example Discworld movies recorded off TV and converted for the AppleTV) that you now get an entry under Movies which is taken from the Show tag and a '>' symbol at the end of the row. If you select the entry, you then get a sub-menu of those movies sharing that Show tag.
This is not a feature I've heard mentioned before, either on this forum or in the spec. for update 2.3 and was wondering if this was new to update 2.3 and whether this is now a feature or something which Apple could remove in the next update?

Just to add a bit of doom and gloom
Apple still haven't fixed the issue of the ordering of movies in the Shared Movies list. Under My Movies, the AppleTV seems to use the Sort Name tag (correctly in my opinion), but under Shared Movies the AppleTV is still using the Name tag. I have the same videos under both menus, so I know it's an issue with the way the AppleTV is handling the tags between the two menus.
Just wanted to add my bit of doom and gloom for that day, that's all

What are new features on updating 5g ipod with software version 1.2

i hav noticed that on updating ipod video 5g with ipod update 1.2,i noticed only one change i.e brightness control.
search function is not there,and
somebody please tell what is gapless playback, i dont know how it works??!!
i,m unable to tranfer manually songs to ipod,(by drog n drop).i hav to copy to itunes lib then on to music folder of ipod
does the 5g video ipod really supports 640x480 video on
update

With 1.2 5th generation iPods get:
- Gapless Playback
- Game Support
- Movie Support
- Brightness Control
- 640x480 Resolution
- Quick Scroll (the letters you are scrolling through appear when scrolling fast)
Gapless playback allows songs to flow seamlessly together without a gap - Pink Floyd The Wall, The Beatles' Abbey Road, etc. To me, it's the most significant iPod feature since the click wheel.
For manual sync, be sure that option is selected in the iPod preferences.

Ios 5 Update New Features says that iCal now has a week view for iPhone but after updating last weekend, I don't see any week view--just List, Day and Month..How do I get the week view?

ios 5 Update New Features says that calendar now has a week view but after updating my iPhone 4 last weekend, I don't see any week view for iCal--just List, Day and Month as in the past. Is the weekly view available for iCal and if so, how do I access it?

Rotate your phone to landscape.

So, my ipod touch is running 5.1.1 and is slow and sometimes unresponsive. According to Apple it will not update to iOS 6. It is a 32GB, 3rd Generation. I want the new features but it's making me mad. I do not want to jailbreak. HELP?!

So, my IPod touch is running 5.1.1 and is slow and sometimes unresponsive. According to Apple it will not update to iOS 6. It is a 32GB, 3rd Generation. I want the new features but it's making me mad. I do not want to jailbreak. As this would void my device from Apple. I love the features iOS 6 has to offer but I don't want to put out anymore money. IPods are expensive enough, Should I use blobs? Or would that make my device worse. Plus I do not want to pay $20.00 for a chat and have to wait all day to someone who I can't understand on the telephone. someone help me please.

For the slowness:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

How do I find out what "new" features, if any, are in incremental version updates to CC?

In olden days, Adobe would tell you what was fixed and what was added to new micro-versions of a product. I've noticed now that when I get an update to Photoshop or Bridge, it can be over 100mb but nowhere does it say what the update is for like new features, bug fixes, etc. Does anyone know if there is a version changelog or anything similar that explains what each new incremental update does or fixes? Since we are paying now for our Photoshop and new implementations are supposed to be included (thus no more major new versions), I'd like to know what these new incremental updates actually do and what new and wonderous things Adobe has come up with. Anyone know??

Hi,
You can read about the 14.1.1 & 2 updates here:
http://blogs.adobe.com/crawlspace/2013/09/photoshop-cc-14-1-1-update-now-available.html
For the new features in 14.1, you can find them here:
http://helpx.adobe.com/photoshop/using/whats-new.html#Photoshop%20CC%20|%20September%202013
regards,
steve

Can I find out what the New Features are for Updates?

When the Application Manager says an Update is available, as far as I can see so far, it just says New Features. Is there a web page that will give more details about what features etc. each update will provide? The Application Manager is not showing file sizes AFAICT, and that's a consideration regards timing when you live in rural New Zealand.
Ahhhhh... hang on a moment. Just remembered that I had to download the Photoshop CS6 update manually after a U44M1P7 error, and I still have that page marked:
http://www.adobe.com/downloads/updates/
But what about a nice friendly blog page? Anything like that out there?

Most updates are briefly described in the Cloud blog
http://blogs.adobe.com/creativecloud/

I have bought OSX Lion 1 month back, and now new OS is getting released, there will any updates for the OSX with new features or I have again buy it paying $20, Please let me know??

I have bought OSX Lion 1 month back paying $29.99, and now new OS is getting released, there will any updates for the OSX Lion with new features or I have to again buy it paying $19.99, Please let me know??

http://www.apple.com/osx/uptodate/

HT201365 New update & new features for Iphone in iOS7

I dont like the new update and new features at all. How can i go back to the old feature?

There is no supported way of downgrading to previous iOS versions. However you may Gogole alternative ways of doing it but know that you are on your own and if something goes wrong in the downgrade process your warranty may be voided and Apple will not offer any support for it.
We cannot discuss how to downgrade here due to the Terms of service of these forums, but google should offer lots of hits for it currently.

Add some new features in next nokua asha 311 updat...

Some new features shuould be added in next asha 311 sw update
1. Multitasking
2. Pattern lock
3. A stylish boot screen
4. More apps
5. Support for .sis files
6. More featues other than those if u feel to put on
pls add such featues pls

Not all of the listed email recipients on my contact form are receiving the inquiries.    Muse allows me to add several email addresses separated by a semi-colon (see below from Corey Wrote) but only one of the three addresses are receiving the contact form inquiries.
Corey@Adobe wrote:
Forms
We've added a new Form widget to the widget library.
You can easily configure the form to send the form submissions to multiple email addresses, and optionally redirect users to another page after submitting the form.
You can add and remove fields, and style the form as you would other Adobe Muse elements. You can independently style the various states of the form, and form fields to provide a compelling user experience, with visual cues for error states, empty states, and more.
Because Form processing requires server-side support, Adobe Muse forms are configured to work when published to Adobe Business Catalyst. If you make changes to your form and publish again, Adobe Muse will make the appropriate changes to your Adobe Business Catalyst forms.
Adobe Muse will safeguard data when redesigning your Adobe Business Catalyst forms
If a field with no data submitted is removed, it will be deleted from the database.
If a field that has submitted data is removed, it will be preserved in the database, but can be deleted from the Adobe Business Catalyst admin console if desired.

IPhone is updated, but no new features.

Today I updated my iPhone 4 using iOS 4.3. The first few times error windows kept popping up. After I finally got the update on my phone, I went to check it and the new features were not on my phone. It says that it is on iOS 4.3 but again, like I said: no new features. How can I fix this and get the features that iOS 4.3 was supposed to come with?

What features do you believe you are missing?

Eclipse Mars Install New Features/Update fails with HTTP Code 416

Hi,
I'm currently trying to update my working Eclipse Luna (for Java and DSL
Developers) to the new Mars version (seperate fresh installation), but I keep getting an error, which I was unable to resolve.
The workstation has to use a corporate proxy and it was always a little bit tricky to get the Eclipse Marketplace and Install New Feature/Update working. My Luna Eclipse is configured (network settings) to use "Manual" as Active Provider, with the correct host + port + user + password combination. I also got the known bugs
https://bugs.eclipse.org/bugs/show_bug.cgi?id=281472 and
https://bugs.eclipse.org/bugs/show_bug.cgi?id=281384 , so I added the infamous "-Dorg.eclipse.ecf.provider.filetransfer.excludeContributors=org.eclipse.ecf.provider.filetransfer.httpclient4"
option in the eclipse.ini. While this is working in Luna, I cannot use the Marketplace or Update features in Mars.
I can open the Marketplace and it actually shows all the plugins, I can select one for install and the plugin-dependency-tree is show, but the next step fails with the following message:
eclipse.buildId=4.5.0.I20150603-2000
java.version=1.8.0_45
java.vendor=Oracle Corporation
BootLoader constants: OS=win32, ARCH=x86_64, WS=win32, NL=de_DE
Framework arguments: -product org.eclipse.epp.package.dsl.product
Command-line arguments: -os win32 -ws win32 -arch x86_64 -product org.eclipse.epp.package.dsl.product
org.eclipse.equinox.p2.transport.ecf
Error
Mon Jul 27 09:41:12 CEST 2015
Unable to read repository at http://download.eclipse.org/technology/subversive/3.0/update-site/content.jar.
java.io.IOException: Server returned HTTP response code: 416 for URL: http://download.eclipse.org/technology/subversive/3.0/update-site/content.jar
at sun.net.www.protocol.http.HttpURLConnection.getInputStream0(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at org.eclipse.ecf.provider.filetransfer.retrieve.UrlConnectionRetrieveFileTransfer.getDecompressedStream(UrlConnectionRetrieveFileTransfer.java:552)
at org.eclipse.ecf.provider.filetransfer.retrieve.UrlConnectionRetrieveFileTransfer.openStreams(UrlConnectionRetrieveFileTransfer.java:322)
at org.eclipse.ecf.provider.filetransfer.retrieve.AbstractRetrieveFileTransfer.sendRetrieveRequest(AbstractRetrieveFileTransfer.java:885)
at org.eclipse.ecf.provider.filetransfer.retrieve.MultiProtocolRetrieveAdapter.sendRetrieveRequest(MultiProtocolRetrieveAdapter.java:146)
at org.eclipse.equinox.internal.p2.transport.ecf.FileReader.sendRetrieveRequest(FileReader.java:424)
at org.eclipse.equinox.internal.p2.transport.ecf.FileReader.readInto(FileReader.java:358)
at org.eclipse.equinox.internal.p2.transport.ecf.RepositoryTransport.download(RepositoryTransport.java:101)
at org.eclipse.oomph.p2.internal.core.CachingTransport.download(CachingTransport.java:178)
at org.eclipse.oomph.p2.internal.core.CachingTransport.download(CachingTransport.java:219)
at org.eclipse.equinox.internal.p2.repository.CacheManager.updateCache(CacheManager.java:402)
at org.eclipse.equinox.internal.p2.repository.CacheManager.createCache(CacheManager.java:259)
at org.eclipse.equinox.internal.p2.metadata.repository.SimpleMetadataRepositoryFactory.getLocalFile(SimpleMetadataRepositoryFactory.java:66)
at org.eclipse.equinox.internal.p2.metadata.repository.SimpleMetadataRepositoryFactory.load(SimpleMetadataRepositoryFactory.java:88)
at org.eclipse.equinox.internal.p2.metadata.repository.MetadataRepositoryManager.factoryLoad(MetadataRepositoryManager.java:57)
at org.eclipse.equinox.internal.p2.repository.helpers.AbstractRepositoryManager.loadRepository(AbstractRepositoryManager.java:768)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.oomph.util.ReflectUtil.invokeMethod(ReflectUtil.java:116)
at org.eclipse.oomph.p2.internal.core.CachingRepositoryManager.loadRepository(CachingRepositoryManager.java:344)
at org.eclipse.oomph.p2.internal.core.CachingRepositoryManager.loadRepository(CachingRepositoryManager.java:146)
at org.eclipse.oomph.p2.internal.core.CachingRepositoryManager$Metadata.loadRepository(CachingRepositoryManager.java:394)
at org.eclipse.equinox.internal.p2.metadata.repository.MetadataRepositoryManager.loadRepository(MetadataRepositoryManager.java:96)
at org.eclipse.equinox.internal.p2.metadata.repository.MetadataRepositoryManager.loadRepository(MetadataRepositoryManager.java:92)
at org.eclipse.epp.internal.mpc.ui.operations.AbstractProvisioningOperation.addRepositories(AbstractProvisioningOperation.java:92)
at org.eclipse.epp.internal.mpc.ui.operations.ProfileChangeOperationComputer.computeInstallableUnits(ProfileChangeOperationComputer.java:385)
at org.eclipse.epp.internal.mpc.ui.operations.ProfileChangeOperationComputer.run(ProfileChangeOperationComputer.java:165)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:119)
Check for Update shows the same result.
I tried googling for this kind of error, but it seems no one has reported this problem so far. I'm a little bit lost what to do now (apart from using Luna again), since exactly the same configuration is working in Luna, but is unusable for me in Mars. The network access seems to work because Mars can load the dependency tree of a Marketplace plugin. Every other combination in the network settings fails because of the corporate proxy.
So, any suggetions how to find the root cause? It's quite possible the corporate proxy is misconfigured, but I hope you can help me finding the difference between the working Luna and the (for me) broken Mars, so I know what has to be configured differently. Something seems to be changed in the way the packages are downloaded.
Thank you very much!

Hi,
I'm currently trying to update my working Eclipse Luna (for Java and DSL
Developers) to the new Mars version (seperate fresh installation), but I keep getting an error, which I was unable to resolve.
The workstation has to use a corporate proxy and it was always a little bit tricky to get the Eclipse Marketplace and Install New Feature/Update working. My Luna Eclipse is configured (network settings) to use "Manual" as Active Provider, with the correct host + port + user + password combination. I also got the known bugs
https://bugs.eclipse.org/bugs/show_bug.cgi?id=281472 and
https://bugs.eclipse.org/bugs/show_bug.cgi?id=281384 , so I added the infamous "-Dorg.eclipse.ecf.provider.filetransfer.excludeContributors=org.eclipse.ecf.provider.filetransfer.httpclient4"
option in the eclipse.ini. While this is working in Luna, I cannot use the Marketplace or Update features in Mars.
I can open the Marketplace and it actually shows all the plugins, I can select one for install and the plugin-dependency-tree is show, but the next step fails with the following message:
eclipse.buildId=4.5.0.I20150603-2000
java.version=1.8.0_45
java.vendor=Oracle Corporation
BootLoader constants: OS=win32, ARCH=x86_64, WS=win32, NL=de_DE
Framework arguments: -product org.eclipse.epp.package.dsl.product
Command-line arguments: -os win32 -ws win32 -arch x86_64 -product org.eclipse.epp.package.dsl.product
org.eclipse.equinox.p2.transport.ecf
Error
Mon Jul 27 09:41:12 CEST 2015
Unable to read repository at http://download.eclipse.org/technology/subversive/3.0/update-site/content.jar.
java.io.IOException: Server returned HTTP response code: 416 for URL: http://download.eclipse.org/technology/subversive/3.0/update-site/content.jar
at sun.net.www.protocol.http.HttpURLConnection.getInputStream0(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at org.eclipse.ecf.provider.filetransfer.retrieve.UrlConnectionRetrieveFileTransfer.getDecompressedStream(UrlConnectionRetrieveFileTransfer.java:552)
at org.eclipse.ecf.provider.filetransfer.retrieve.UrlConnectionRetrieveFileTransfer.openStreams(UrlConnectionRetrieveFileTransfer.java:322)
at org.eclipse.ecf.provider.filetransfer.retrieve.AbstractRetrieveFileTransfer.sendRetrieveRequest(AbstractRetrieveFileTransfer.java:885)
at org.eclipse.ecf.provider.filetransfer.retrieve.MultiProtocolRetrieveAdapter.sendRetrieveRequest(MultiProtocolRetrieveAdapter.java:146)
at org.eclipse.equinox.internal.p2.transport.ecf.FileReader.sendRetrieveRequest(FileReader.java:424)
at org.eclipse.equinox.internal.p2.transport.ecf.FileReader.readInto(FileReader.java:358)
at org.eclipse.equinox.internal.p2.transport.ecf.RepositoryTransport.download(RepositoryTransport.java:101)
at org.eclipse.oomph.p2.internal.core.CachingTransport.download(CachingTransport.java:178)
at org.eclipse.oomph.p2.internal.core.CachingTransport.download(CachingTransport.java:219)
at org.eclipse.equinox.internal.p2.repository.CacheManager.updateCache(CacheManager.java:402)
at org.eclipse.equinox.internal.p2.repository.CacheManager.createCache(CacheManager.java:259)
at org.eclipse.equinox.internal.p2.metadata.repository.SimpleMetadataRepositoryFactory.getLocalFile(SimpleMetadataRepositoryFactory.java:66)
at org.eclipse.equinox.internal.p2.metadata.repository.SimpleMetadataRepositoryFactory.load(SimpleMetadataRepositoryFactory.java:88)
at org.eclipse.equinox.internal.p2.metadata.repository.MetadataRepositoryManager.factoryLoad(MetadataRepositoryManager.java:57)
at org.eclipse.equinox.internal.p2.repository.helpers.AbstractRepositoryManager.loadRepository(AbstractRepositoryManager.java:768)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.oomph.util.ReflectUtil.invokeMethod(ReflectUtil.java:116)
at org.eclipse.oomph.p2.internal.core.CachingRepositoryManager.loadRepository(CachingRepositoryManager.java:344)
at org.eclipse.oomph.p2.internal.core.CachingRepositoryManager.loadRepository(CachingRepositoryManager.java:146)
at org.eclipse.oomph.p2.internal.core.CachingRepositoryManager$Metadata.loadRepository(CachingRepositoryManager.java:394)
at org.eclipse.equinox.internal.p2.metadata.repository.MetadataRepositoryManager.loadRepository(MetadataRepositoryManager.java:96)
at org.eclipse.equinox.internal.p2.metadata.repository.MetadataRepositoryManager.loadRepository(MetadataRepositoryManager.java:92)
at org.eclipse.epp.internal.mpc.ui.operations.AbstractProvisioningOperation.addRepositories(AbstractProvisioningOperation.java:92)
at org.eclipse.epp.internal.mpc.ui.operations.ProfileChangeOperationComputer.computeInstallableUnits(ProfileChangeOperationComputer.java:385)
at org.eclipse.epp.internal.mpc.ui.operations.ProfileChangeOperationComputer.run(ProfileChangeOperationComputer.java:165)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:119)
Check for Update shows the same result.
I tried googling for this kind of error, but it seems no one has reported this problem so far. I'm a little bit lost what to do now (apart from using Luna again), since exactly the same configuration is working in Luna, but is unusable for me in Mars. The network access seems to work because Mars can load the dependency tree of a Marketplace plugin. Every other combination in the network settings fails because of the corporate proxy.
So, any suggetions how to find the root cause? It's quite possible the corporate proxy is misconfigured, but I hope you can help me finding the difference between the working Luna and the (for me) broken Mars, so I know what has to be configured differently. Something seems to be changed in the way the packages are downloaded.
Thank you very much!

What are the new features in the new Mac 10.8.2 update?

What are the new features in the newwest mac update?

Read all about it:
http://support.apple.com/kb/DL1581

New feature on update 10.4.6

Similar Messages

Maybe you are looking for