New features of CRM 7.0 in Marketing

Hi CRM 7.0 Experts,
I am currently using CRM 2007 for all my marketing functionalities. I like to know what would be the main New features in CRM 7.0 marketing and other areas in general. Any major new tools, enhancements (not to look into release notes) from the functional stand point which is not available in CRM 2007.
Would grant generous points for some info on this.
Thanks,
John

Hi John,
There is a recorded session and a pdf presentation available in the below link. I hope that will answer your question in detail.
https://websmp109.sap-ag.de/~sapidb/011000358700000643522009E
(The session is available at the end of the list).
Let me know if its of any help.
Regards
Kalees

Similar Messages

New Features in CRM5.0 Marketing

Can anyone tell me what the new features are in CRM5.0 in particular the Marketing part.
Or if there is any specific documentation on what the new features are in CRM5.0.
I have looked in the sticky at the documentation links in there but none seem to specifically mention new features.
Any help appreciated.Many Thanks
David

Strategy and Planning: Optimize marketing strategies with scenario and forecasting tools. Facilitate collaboration in developing marketing plans and activities while increasing the plan visibility and its effectiveness.
Scenario Planning
Enhanced Financial Forecasting
Enhanced Monitoring & Reporting Capabilities
Digital Asset Management: Enable collaboration in digital asset development process and maintain a single source of truth. Allow both internal and external users easy access and distribution of the most accurate digital assets.
Change management
Search and Classification
Legal and licensing enforcement
Format Handling Data Management: Gain control of customer/prospect data management: from importing/exporting, enriching, and managing accuracy. Remove the traditional dependencies on IT and gain control of the marketing process.
List Import/Export Management
Data Quality Management
Manual response entry
Enhanced Segmentation: Discover and gain insights into your customer base. Perform on the fly segment analysis and segmentation at high performance speeds and accelerate the marketing process.
High Speed Segmentation*
Segment size controls and de-duplication
Access to multiple data sources
Coupon Management for CPG: Increase financial accuracy of your promotional plans and predict the returns to manage financial accountability. Close the loop on coupon planning, development, processing, and measurement.
Accruals modeling and forecasting analytics
Integrated redemption and financial accounting
Coupon Effectiveness
Rule Based Lead Distribution: Optimize the lead assignment process using flexible, end user definable rules engine. Extend the automated lead distribution and management process to partner organizations.
End user definable rules
Workflow based follow up process.
Tight integration between Marketing, Sales, and Partners
regards,
ramji gupta

New feature phones?????

I am a 15+ year customer of Verizon. I have 5 phones on a family plan and we havw all been waiting for months for new feature phones. We were told several times that there would be new ones soon, but we are tired of waiting.
Has anyone else used other providers that have recent and updated feature phones? Who and which phones recommended? Thank you

Thank you for your inquiry. Adding to what was stated, we do offer new feature phones all the time that are available online for review. Please visit us at your website http://www.verizonwireless.com to refer to the many phones offered.
Also, you can sign up for email alerts to be informed when new products and devices become available. Please refer to this link
http://search.vzw.com/?market=53520&q=email+alerts&p=null&ss=null&b2eFlag=N

New Feature called "Business Packages" in HANA

Hi Guys,
We just upgraded HANA from version 13 to version 16 now according to what i heard SAP was introducing a new feature "Business Packages" in HANA version 16 but i am unable to find any documentation or information on it.
If anyone has any idea about "Business Packages" ,how do we use them, then please let me know.
Regards,
Sheikh Hassan Ayub

Hi Sheikh,
The Business Packages for HANA are the RDS(Rapid deployment solutions) readily available for quick implementation.
http://service.sap.com/solutionpackages -->In-Memory Computing
RDS is currently available for CRM, ERP and CO-PA scenarios and expected implementation time is 6-8 weeks.
Are you looking for any other thing?
Regards, Rahul

How to Develop New Application in CRM

Hi all,
I need your help to guide me in deciding which transactions, customization and/or development tools that i should use for developing new application in CRM to replace an existing web based application?
The following steps are some the current system business processes:
1. User (requester) login to System
2. Click Generate a Request
3. Fill all requirement information on the form which contains user specific fields
4. Click save, system will save the request form with status Issued and generate a control number and display it.
8. User can print the form by clicking Print Information.
9. A notification e-mail will be sent to the selected approver to approve the request
10. Once the approver receives the notification, he can log in to the system and approve/reject the request.
11. Once done, a notification e-mail will be sent to the selected the requestor.
12. User can print the form by clicking Print Information.
Also, the new application needs to enable the user to add/review/update attachments, keep tracking of histories, add note and to have other CRM features.
Please note that last year we developed many portal applications using Web Dynpro for Java and all applications are working fine. However, our management want us to use CRM system as a solution to migrate this web application to SAP.
Thanks in advance for your help.

Hello Ali,
1. do the requester and approver users have Portal and CRM accounts?
2. What CRM and Portal Version do you use?
3. Is there any decission made which CRM Frontend you should use: PC-UI, IC Web Client, SAP GUI for Windows, Mobile Sales?
Regards
Gregor

No new features for no Creative Cloud users? Tell me why?

Adobe, please tell me why I, no Cloud Crative user don't receive new Illustrator CS6 features:
- Package files
- Unembed images
- Links informations
Why Creative Cloud users are better than users who bought box version? it's not fair.

@Wade
What a bunch of babble and marketing talk for Adobe! You do realize there are other services (far better ones actually) than YouSendIt, don't you? In the YouSendIt category, try WeTransfer.com : super fast uploads and downloads up to 2gb in one RAR or ZIP file at a time.
You have heard about DropBox, SkyDrive, GoogleDrive, etc. too, haven't you? Without going into the pros and cons of any of those services, I can categorically say that each one is better... and cheaper... than an Adobe Cloud sub.
And since you're talking about the world, and complaining at the same time about your upload speeds, that remains the same for the Adobe Cloud or any Internet service for that matter. Adobe Cloud is NOT faster than any of the above services I mentioned.
Also you should know that there are many parts of the world, including HUGE chunks of the US, where broadband Internet still doesn't exist. There are some places that may never see broadband land lines, and those communities are installing LTE instead. LTE has it's advantages... but the main disadvantage is cost. No such thing as a "true Flat rate" with LTE, and you are bound to run up against "volume restrictions" and pay extra for exheeding them. No advantage then for Cloud users: they will pay on top.
I personally use DropBox and SkyDrive syncing projects and files with assorted clients every day... including huge PSD and RAW file libraries. If I have a "one off" project, I use WeTransfer with no problems. If you have a client that refuses to learn the first thing about downloading files from a link, I'm sorry for you. I mean that without sarcasm. I would like to ask though: are they actually then playing with your native files in CS? Really? And they can't even download a linked ZIP? (See my comment below about suspects).
You fail to convince me in the end, that Adobe's Cloud Drive is the best choice at the moment or in the future.
Considering this thread is/was about Perpetual vs. Cloud subs, no one has mentioned the main underlying fact and potential reason for Adobe to push people to Subs: PIRACY.
While very possibly not prevalent in North America... I would venture to say that in the rest of the world, 75% of CS installations are against the EULA, whether multiple machine installs and/or downright pirated. BTW: I have personally ran across the "multiple machine" install countless times at more shops/studios than I care to mention.
I would like to add a "twisted logic" to my personally accepting the new Adobe Subs as the way to go, and especially for new features.
IF (big if!) this is to cut down on piracy and the number of studios/shops driving media design/printing prices into the basement, because they don't actually "pay" for their right to offer their services.... I'm all for it! If this also results in the culling of people that think that, with a Walmart computer and a jacked CS disk image, they are "now in business to offer professional graphic services"... again, I applaud the Cloud initiative.
It surely appears that I'm bitter about the "competition"... well yes I am. Because, not only are the pirates NOT competing fairly, but I (personally) have to deal with problems they make for my clients and the "trash" files they receive on a daily basis. It is also many of those clients that are perpetually licensed CS and EULA abiding Adobe customers, that are slowly laying off trained professional graphic/media designers as well as print technicians... because they are "too expensive".
And finally to add insult to injury: I also suspect we see a number of these "pirates" and "just beginning professionals" here in these forums. The number of posts I see coming from some people that shouldn't even have CS installed, is... well... disheartening.*
* Funny, how as graphic designers, we were always wishing for faster, better, cheaper, easier. How little did we realize or fail to foresee, that when the dream came true... it would also be accessible to the "I can too" crowd. Is it nasty of me to say in return, "No. You can't. And I doubt you ever will. It's not the tools, it's the talent. You have none that I can see."
PS. Sorry... sort of worn out and emotional after staying up until 3.00am to "re-design" a thoroughly "#$%^&*!!!" Corel PDF! Fugly has a brand new definition, and "pro-" is followed by "-stitution". I need to shower 3 times after this one!

New Features of BOE 4.0 integration kit for SAP

Dear colleagues,
I am looking for a presentation that shows the new features of SAP BOE XI 4.0 integration kit for SAP (BW), compared to XI 3.1. I have for example read that regarding WebI it will be possible to connect directly to BEx queries without universe. It is correct ?
I look to several documents on the market place, but there is no clear document about these new features...
Thanks for your help.
Regards,
Thibaud

no "integration kit" in version 4 - its all nicely embedded into the core product.
you are correct - webi can direct connect (using BICS) and also can source from an Analysis View (which is an output of either Analysis Services OLAP edition or the Microsoft edition (excel plugin). you also get a new universe layer (.UNX) which gives you a much better view of your underlying BEx queries/Cubes and allows you to combine with aother data sources.
lots more info in the product manuals to v4 which are available at...
http://help.sap.com/businessobject/product_guides/
(just change the product drop down to "SAP BusinessObjects Business Intelligence Platform"
some specific info on SAP BW connectivity is here...
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_sap_olap_univ_en.pdf
cheers,
Jeremy

SET RUNTIMESUBVARS - my favorite new feature in 11.1.2.3

Hi there,
I must say it!
My favorite new feature in 11.1.2.3: SET RUNTIMESUBVARS see here:
http://docs.oracle.com/cd/E40248_01/epm.1112/essbase_tech_ref/frameset.htm?set_runtimesubvars.html
No longer the need in a MaxL scipt to create and/or set server variables first to be used in calculation (csc) and no need to delete or reset or to tidy up them.
(And no more (these senseless) error messages in MaxL protokoll saying that a variable already exists)
It is much leaner and cleaner now.
Thats pretty cool! You should take a look...
Thank to the dev team and best Regards
Andre
PS: see also here:
https://blogs.oracle.com/proactivesupportEPM/entry/epm_11_1_2_31?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+orana+%28OraNA%29
Edited by: andreml on May 4, 2013 1:25 PM

I have often found that the pleasure related to the anticipation of an event or thing is often greater than the actual act or thing. We anticipate that it is gonna work. However here is the reality (or I think it is)
FIX(Jan,Sales,"100-10",@RELATIVE(Market,0))
 "Actual"(
 IF(@ISUDA(Market,"Major Market"))
 @CREATEBLOCK (@UDA(Market,"Major Market"));
 100;
 ENDIF
ENDFIXI don't see it working. Techref says use @CREATEBLOCK under a FIX (If you use it without opening a block you get this error "Error: 1012000 Invalid Syntax - Not a CALC command [@CREATEBLOCK]")
SET RUNTIMESUBVARS works if you can assign a value to the variable.
SET RUNTIMESUBVARS
 myMarket ="New York";
 salesNum = 120;
 pointD ="Actual"->"Sales";
FIX(Jan,&myMarket)
 Actual(
 &pointD=&salesNum;
ENDFIXHowever if you use the prompt string (I'm not sure where the prompt will appear (Tech Ref says it is calc script, so I'm assuming that when we validate it should prompt for input)
SET RUNTIMESUBVARS
 myMarket <RTSV_HINT>myMarket: Input the value as a string, such as "New York"</RTSV_HINT>;
 salesNum <RTSV_HINT>salesNum: Input the value as an integer, such as 100</RTSV_HINT>;
 pointD <RTSV_HINT>pointD: Input the value as a member name or a member combination, such as "Actual"->"Sales"</RTSV_HINT>;
FIX(Jan,&myMarket)
 Actual(
 &pointD=&salesNum;
ENDFIXI think we've to wait for more inputs on these.
Regards
Celvin

NEW Kin TwoM Pricing / New Feature Phones

So, I've been checking the site compulsively for about the last two months...let me know if you think my logic on this is sound:
This week I noticed that the Kin OneM pricing went from 19.99 to FREE- it doesn't seem to be a promotional price either because it's listed as an "Online Discount" the exact same way the Crux and Cosmos are.
This leads me to believe two things:
1) Possibly the best news- with so many of the feature phones moving to FREE pricing, it's not a huge assumption that new feature phone devices may soon be on the way. (Please, please, please offer some compelling phones Verizon...)
2) The Kin TwoM will soon see a price decrease as well- probably to the 19.99 range making it almost impossible to pass up.
If number 1 turns out to be true, I'll be waiting a bit to see what comes out before I pull the trigger on the Kin TwoM.
There's been recent news that Verizon will be releasing devices "later this year" (whatever that means) with the Brew OS and Opera Mini preloaded- this probably means they've got some decent feature phones coming. I'm making that assumption based on the fact that the HTC Freestyle on AT&T has been pretty much regarded as the first device to be released like this...I'm thinking Verizon will want to compete with them at least at the beginning of a new standard of feature phones.
But, if it turns out that they again bring a line-up that only gets the teens excited, count me in for the Kin TwoM.
I'd prefer not to have to walk around the office with the same phone my boss's 15 year old daughter has...now there's an interesting water cooler chat:
"Bergman, nice phone...my tween daughter loves that thing..."

Somehow i feel the Kin phones won't be for sale for much longer. For those that need a basic phone with touch interface, there's other options which have a clearer interface. Including the Costco special Samsung SCH-u370. It's a Samsung u820/Reality that doesn't require data. No free wi-fi, but overall it's a much better phone. More ... finished, than the Kin phones. The Kins to me feels like a Windows Phone beta in comparison.
I do love how the tiles are laid out on the home screen better on the Kins than WP7 phones, there's no empty space above or to the right. And i love the favorites contacts screen of the Kins. WP7 phones though feels much sleeker and better zune like controls. And since you can load apps on WP7 your browser won't be outdated.
For current feature phones, i think the u370 is a top choice on Verizon. Good build quality, clear user interface, nice fonts and sizes, a useful sketch app, and the ability to doodle/notate on your pictures. Excellent value. Kin Onem, i can't reccomend. The phone dial numbers are too small on screen to be usable. Thicker than other feature phones, but because of the form factor, the side buttons are almost useless in one handed use. Kin Twom is much better in these aspects than the Onem. But certain interface font sizes are still too small.
The web browser (IE 6 Mobile) is not bad. Mobile and minimal pages loads quick on wifi. Although the back button is not easy to get to, and i haven't figured out if you can go forward in history. The url/title bar seems unfinished, i wish it would have swapped to the title after entering the url, thus saving space. The tiled bookmarks is a good idea, but page titles doesn't fit on the tiles. Even though the hardware is Tegra1, the Kin doesn't come with Flash lite. So alot of flash interactive buttons and streaming doesn't work. Infact simple mp3 playback and playlists doesn't stream in the browser. Which is sad.
One saving grace for the browser that i have found is Bing. Yep. http://m.bing.com/ Of course on first load it will be in landscape mode. And it only list the top 3 items of the menu, without being able to expand it. But go into portrait mode, and you should see the complete menu. Almost every web app on this menu worked well. My favorite is the directions. It almost makes up for not having google maps. Almost.
The strong points of the Twom is of course the browser + wifi, and zune. Which is like a zune hd lite. The FM radio made up for the lack of web streaming. I'm rediscovering FM thanks to it. And the zune desktop software is very modern and sleek. It made itunes look like it's made for accountants. Personally i love the Twom even though it has its quirks. The ui is unique, not quite WP7, and not like anything else. No branding as well. With FM radio i have wireless music anywhere, for free.
Here are some mobile sites that i found to work on Kin's IE6 Mobile:
http://m.bing.com/ --- search, local, traffic, directions (fantastic), movies, weather, favs.
http://mobile.local.com/ --- more direct/faster way to search for anything local
http://wapedia.mobi/en/ --- easier to load than mobile wikipedia
http://en.m.wikipedia.org/
http://m.whitepages.com/ http://www.gasbuddytogo.com/
http://www.gasbuddytogo.com/ http://translate.google.com/m/
http://translate.google.com/m/
There's plenty of news & social websites that have mobile modes. I've tried cnn, twitter, and youtube. And they all worked well. Youtube mobile seems to be the only way you can stream anything with the browser. I've tried other mobile video/music sites, and no go.
The phone have frozen 4 times within the last day. This happens with heavy web browsing and music playback. Overall i can't recommend the Kin phones, although go ahead and buy one while you can if you know what you're getting into. I feel that future feature phones will be more polished like the Samsung u370/u820 rather than these Kins. I just wish MS, Verizon, Danger and PCD realize that they were on to something great with these Kins despite the marketing flop. I like the TwoM despite the beta feel of the software and hardware (WP7 still looks like it's a beta product).

HI TO ALL GURUS nEW MEMBER IN CRM COMMUNITY

Hi sam here,
I am new to SAP CRM, would like to know a few things that a ABAPer should know to make a living
Now venturing into SAP CRM.
Technical area-- BADI's and standard ABAP work that i don't know what i have to do.
I know a few function modules.
I am checking out help.sap.com truly speaking getting lost in that mass.
REQUIREMENTS:
1CRM Table model and relationship.
2FM USAGE (important function modules to know)
3Suggest me what ABAPer(i) must know to solve issues.
4I will be very happy if i can get a documentation that shows a technical view point.

Sam,
My recommendations:
For data model you can use a CRM system via SD11 to review the CRM data model. The model objects are PRM_BP - business partner, PRM_BPROC - business transactions, and PRM_PROD - products should be reviewed.
You should make yourself familiar with the XIF adapter. Look at function modules CRMXIF_SAVE and CRMXIF_EXTRACT for more information.
Another tool you must learn to use is the following:
In SE80 browse the Application Hierarchy by packages.
You can find the technical supporting component of any almost CRM application via this technique.
I recommend that if you have an service.sap.com marketplace id, that you download the CRM PCUI cookbook and IC webclient cookbook.
You should also take some functional classes on CRM. It will help you learn the application, which will make investigating the technical side a lot eaiser. Pick either Sales or Marketing as an easy way to get started.
That's just a start. It takes at least three months of actual project work, being guided by a senior CRM abap developer, before someone new to the product can start working independently. This estimate is based on people who have worked with me on past projects. I have personally worked with the product since 2001, and had to learn CRM the "hard way". You should have no problem picking things up with what is available today, if you have a solid ABAP development background.
Good luck,
Stephen

Follow-up to archived thread "Another Error (I think) In the 12.1 New Features Guide"

I hoped to be able to add a reply to the most recent reply on March 8 in the "Another Error (I think) In the 12.1 New Features Guide" thread (https://community.oracle.com/thread/3526588), but since that thread has been archived, I am doing what was suggested elsewhere: create a new thread referencing the old one. My reply is:
Thank you for your explanation about preferring PDF over HTML. That is perfectly fine and understandable. Also, we very much appreciate your documentation feedback in this forum, and encourage you to continue to report any issues here.
I apologize for not replying much sooner. I either didn't get or overlooked an original notification about "Recent activity" after your reply; otherwise, I would have replied then.

Thanks for that comment. I have sent a pointer to it to the writer for that book. Note that with the New Features Guide, most of the content is automatically drawn from an internal system that tracks projects and features; so if a change is needed, the writer will notify the owner of that content (typically a developer or a product manager) to investigate and (if necessary) modify the underlying data, after which the changed information will be picked up for a future revision of the book.
Also, while anyone is welcome to enter documentation comments in this forum, another option that may be more convenient for comments on specific sections is the Reader Comment area at the bottom of each HTML page (such as http://docs.oracle.com/cd/E16655_01/server.121/e17906/chapter1.htm#NEWFT495 for the page containing Section 1.5.9.8). Any comments entered in a Reader Comment area go to someone in our documentation production group, who forwards them to the appropriate writers.
However, if a comment involves multiple HTML pages or books, or if you want the matter to be in a public forum for visibility and searchability, posting in this forum is a good option.

Ios 5 Update New Features says that iCal now has a week view for iPhone but after updating last weekend, I don't see any week view--just List, Day and Month..How do I get the week view?

ios 5 Update New Features says that calendar now has a week view but after updating my iPhone 4 last weekend, I don't see any week view for iCal--just List, Day and Month as in the past. Is the weekly view available for iCal and if so, how do I access it?

Rotate your phone to landscape.

Oracle 10G New Feature........Part 1

Dear all,
from last couple of days i was very busy with my oracle 10g box,so i think this is right time to
share some intresting feature on 10g and some internal stuff with all of you.
Have a look :-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Oracle 10g Memory and Storage Feature.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1.Automatic Memory Management.
2.Online Segment Shrink
3.Redolog Advisor, checkpointing
4.Multiple Temporary tablespace.
5.Automatic Workload Repository
6.Active Session History
7.Misc
a)Rename Tablespace
b)Bigfile tablespace
c)flushing buffer cache
8.ORACLE INTERNAL
a)undocumented parameter (_log_blocks_during_backup)
b)X$ view (x$messages view)
c)Internal Structure of Controlfile
1.Automatic memory management
================================
This feature reduce the overhead of oracle DBA.previously mostly time we need to set diff oracle SGA parameter for
better performance with the help of own experience,advice views and by monitoring the behaviour
of oracle database.
this was just time consuming activity.........
Now this feature makes easy life for oracle DBA.
Just set SGA_TARGET parameter and it automatically allocate memory to different SGA parameter.
it focus on DB_CACHE_SIZE
SHARED_POOL_SIZE
LARGE_POOL
JAVA_POOL
and automatically set it as
__db_cache_size
__shared_pool_size
__large_pool_size
__java_pool_size
check it in alert_log
MMAN(memory manager) process is new in 10g and this is responsible for sga tuning task.
it automatically increase and decrease the SGA parameters value as per the requirement.
Benefit:- Maximum utlization of available SGA memory.
2.Online Segment Shrink.
==========================
hmmmmm again a new feature by oracle to reduce the downtime.Now oracle mainly focus on availablity
thats why its always try to reduce the downtime by intrducing new feature.
in previous version ,reducing High water mark of table was possible by
Exp/imp
or
alter table move....cmd. but on these method tables was not available for normal use for long hrs if it has more data.
but in 10g with just few command we can reduce the HWmark of table.
this feature is available for ASSM tablespaces.
1.alter table emp enable row movement.
2.alter table emp shrink space.
the second cmd have two phases
first phase is to compact the segment and in this phase DML operations are allowed.
second phase(shrink phase)oracle shrink the HWM of table, DML operation will be blocked at that time for short duration.
So if want to shrink the HWM of table then we should use it with two diff command
first compact the segment and then shrink it on non-peak hrs.
alter table emp shrink space compact. (This cmd doesn't block the DML operation.)
and alter table emp shrink space. (This cmd should be on non-peak hrs.)
Benefit:- better full table scan.
3.Redolog Advisor and checkpointing
================================================================
now oracle will suggest the size of redo log file by V$INSTANCE_RECOVERY
SELECT OPTIMAL_LOGFILE_SIZE
FROM V$INSTANCE_RECOVERY
this value is influence with the value of FAST_START_MTTR_TARGET .
Checkpointing
Automatic checkpointing will be enable after setting FAST_START_MTTR_TARGET to non-zero value.
4.Multiple Temporary tablespace.
==================================
Now we can manage multiple temp tablespace under one group.
we can create a tablespace group implicitly when we include the TABLESPACE GROUP clause in the CREATE TEMPORARY TABLESPACE or ALTER TABLESPACE statement and the specified tablespace group does not currently exist.
For example, if group1 is not exists,then the following statements create this groups with new tablespace
CREATE TEMPORARY TABLESPACE temp1 TEMPFILE '/u02/oracle/data/temp01.dbf'
SIZE 50M
TABLESPACE GROUP group1;
--Add Existing temp tablespace into group by
alter tablespace temp2 tablespace group group1.
--we can also assign the temp tablespace group on database level as default temp tablespace.
ALTER DATABASE <db name> DEFAULT TEMPORARY TABLESPACE group1;
benefit:- Better I/O
One sql can use more then one temp tablespace
5.AWR(Automatic Workload Repository):-
================================== AWR is built in Repository and Central point of Oracle 10g.Oracle self managing activities
is fully dependent on AWR.by default after 1 hr, oracle capure all database uses information and store in AWR with the help of
MMON process.we called it Memory monitor process.and all these information are kept upto 7 days(default) and after that it automatically purge.
we can generate a AWR report by
SQL> @?/rdbms/admin/awrrpt
Just like statspack report but its a advance and diff version of statspack,it provide more information of Database as well as OS.
it show report in Html and Text format.
we can also take manually snapshot for AWR by
BEGIN
DBMS_WORKLOAD_REPOSITORY.CREATE_SNAPSHOT ();
END;
**The STATISTICS_LEVEL initialization parameter must be set to the TYPICAL or ALL to enable the Automatic Workload Repository.
[oracle@RMSORA1 oracle]$ sqlplus / as sysdba
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Mar 17 10:37:22 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> @?/rdbms/admin/awrrpt
Current Instance
~~~~~~~~~~~~~~~~
DB Id DB Name Inst Num Instance
4174002554 RMSORA 1 rmsora
Specify the Report Type
~~~~~~~~~~~~~~~~~~~~~~~
Would you like an HTML report, or a plain text report?
Enter 'html' for an HTML report, or 'text' for plain text
Defaults to 'html'
Enter value for report_type: text
Type Specified: text
Instances in this Workload Repository schema
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DB Id Inst Num DB Name Instance Host
* 4174002554 1 RMSORA rmsora RMSORA1
Using 4174002554 for database Id
Using 1 for instance number
Specify the number of days of snapshots to choose from
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Entering the number of days (n) will result in the most recent
(n) days of snapshots being listed. Pressing <return> without
specifying a number lists all completed snapshots.
Listing the last 3 days of Completed Snapshots
Snap
Instance DB Name Snap Id Snap Started Level
rmsora RMSORA 16186 16 Mar 2006 17:33 1
16187 16 Mar 2006 18:00 1
16206 17 Mar 2006 03:30 1
16207 17 Mar 2006 04:00 1
16208 17 Mar 2006 04:30 1
16209 17 Mar 2006 05:00 1
16210 17 Mar 2006 05:31 1
16211 17 Mar 2006 06:00 1
16212 17 Mar 2006 06:30 1
16213 17 Mar 2006 07:00 1
16214 17 Mar 2006 07:30 1
16215 17 Mar 2006 08:01 1
16216 17 Mar 2006 08:30 1
16217 17 Mar 2006 09:00 1
Specify the Begin and End Snapshot Ids
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Enter value for begin_snap: 16216
Begin Snapshot Id specified: 16216
Enter value for end_snap: 16217
End Snapshot Id specified: 16217
Specify the Report Name
~~~~~~~~~~~~~~~~~~~~~~~
The default report file name is awrrpt_1_16216_16217.txt. To use this name,
press <return> to continue, otherwise enter an alternative.
Benefit:- Now DBA have more free time to play games.....................:-)
Advance version of statspack
more DB and OS information with self managing capabilty
New Automatic alert and database advisor with the help of AWR.
6.Active Session History:-
==========================
V$active_session_history is view that contain the recent session history.
the memory for ASH is comes from SGA and it can't more then 5% of Shared pool.
So we can get latest and active session report from v$active_session_history view and also get histortical data of
of session from DBA_HIST_ACTIVE_SESS_HISTORY.
v$active_session_history include some imp column like:-
~SQL identifier of SQL statement
~Object number, file number, and block number
~Wait event identifier and parameters
~Session identifier and session serial number
~Module and action name
~Client identifier of the session
7.Misc:-
========
Rename Tablespace:-
=================
in 10g,we can even rename a tablespace by
alter tablespace <tb_name> rename to <tb_name_new>;
This command will update the controlfile,data dictionary and datafile header,but dbf filename will be same.
**we can't rename system and sysaux tablespace.
Bigfile tablespace:-
====================
Bigfile tablespace contain only one datafile.
A bigfile tablespace with 8K blocks can contain a 32 terabyte datafile.
Bigfile tablespaces are supported only for locally managed tablespaces with automatic segment-space management.
we can take the advantage of bigfile tablespace when we are using ASM or other logical volume with RAID.
without ASM or RAID ,it gives poor response.
syntax:-
CREATE BIGFILE TABLESPACE bigtbs
Flushing Buffer Cache:-
======================
This option is same as flushing the shared pool,but only available with 10g.
but i don't know, whats the use of this command in prod database......
anyway we can check and try it on test server for tuning n testing some query etc....
SQL> alter system flush buffer_cache;
System altered.
++++++++++++++++++
8.Oracle Internal
++++++++++++++++++
Here is some stuff that is not related with 10g but have some intresting things.
a)undocumented parameter "_log_blocks_during_backup"
++++++++++++++++++++++++
as we know that oracle has generate more redo logs during hotbackup mode because
oracle has to maintain the a complete copy of block into redolog due to split block.
we can also change this behaviour by setting this parameter to False.
If Oracle block size equals the operating system block size.thus reducing the amount of redo generated
during a hot backup.
WITHOUT ORACLE SUPPORT DON'T SET IT ON PROD DATABASE.THIS DOCUMENT IS JUST FOR INFORMATIONAL PURPOSE.
b)some X$ views (X$messages)
++++++++++++++++
if you are intresting in oracle internal architecture then x$ view is right place for getting some intresting things.
X$messages :-it show all the actions that a background process do.
select * from x$messages;
like:-
lock memory at startup MMAN
Memory Management MMAN
Handle sga_target resize MMAN
Reset advisory pool when advisory turned ON MMAN
Complete deferred initialization of components MMAN
lock memory timeout action MMAN
tune undo retention MMNL
MMNL Periodic MQL Selector MMNL
ASH Sampler (KEWA) MMNL
MMON SWRF Raw Metrics Capture MMNL
reload failed KSPD callbacks MMON
SGA memory tuning MMON
background recovery area alert action MMON
Flashback Marker MMON
tablespace alert monitor MMON
Open/close flashback thread RVWR
RVWR IO's RVWR
kfcl instance recovery SMON
c)Internal Structure of Controlfile
++++++++++++++++++++++++++++++++++++
The contents of the current controlfile can be dumped in text form.
Dump Level Dump Contains
1 only the file header
2 just the file header, the database info record, and checkpoint progress records
3 all record types, but just the earliest and latest records for circular reuse record types
4 as above, but includes the 4 most recent records for circular reuse record types
5+ as above, but the number of circular reuse records included doubles with each level
the session must be connected AS SYSDBA
alter session set events 'immediate trace name controlf level 5';
This dump show lots of intresting information.
it also show rman recordes if we used this controlfile in rman backup.
Thanks
Kuljeet Pal Singh

You can find each doc in html and pdf format on the Documentation Library 
You can too download all the documentation in html format to have all on your own computer here (445.8MB) 
 
Nicolas.

New Features and Improvements for CS6

IMPORTANT:
By default, Photoshop comes with the Proofing Colors (Cmd/Ctrl+Y) activated and set to CMYK. Adobe must warn about that, because I was editing a large amount of pictures for work and I was doing it under that color profile/work space.
LAYERS PANEL:
Layer Adjustments:
Solid Color: visual feedback in real time.
Gradient: IDEM as above.
Pattern: IDEM as above.
Gradient Map: IDEM as above.
Gradient Editor: IDEM as above.
Opacity and Fill: IDEM as above.
Curves and Levels: Ability to load alfa channels. This way, the adjustments made on the alfa channel won't be destructive.
CHANNELS PANEL:
Channel Luminosity Selection:
Ability to add and subtract from the selection.
Ability to designate an area to be selected.
For point 1, by using the shortcut Cmd+Alt+[number] the luminosity of a channel is loaded as selection. With Cmd+Alt+Shift+[number], the selection grows. But there is no way to subtract from selection (unless by clicking with the mouse on the channel's thumbnail). I think that can be solved by using Cmd+Alt+Shift+[- or +] in order to subtract or add from selection.
Point 2 maybe even more important than point 1, because it allows selecting a designated area by the user, instead of the default luminosity selection, which ranges from 50% of the mid tones to the highlights (or shadows, if the selection is inverted). The user should be allowed to select the starting and finishing points of the luminosity selection.
I thought 2 ways for solving these issues (and making it more intuitive and faster):
A) By using the Histogram Panel, by dragging and highlighting an area on it, that it should load the selected luminosity pixels as a selection, as shown in figure 1:
figure 1
So the result of doing that will be a selection based on the area of the histogram that have been highlighted.
B) By creating a new Adjustment Layer:
It can be based in the same structure of the HUE Adjustment Layer, like figure 2 shows:
Figure 2
Or it can be this way (much better). Figure 3:
Figure 3
The selection can also be controlled by using the Click and Drag as suggested in the figure 1, as shown in the figure 4:
Figure 4
The overlaid highlighting over the histogram can be functional or just a mere graphic representation of the Range and Fade Selector. The "Fading" areas should be also be draggable in order to increase smooth the selection. However, the smoothing can be much better done with the Refining Selection tool and it can be ignored from this new tool.
In any of these cases, the adjustments should give real time feedback when growing or shrinking selection; we must see the selection going bigger or smaller and also, the highlighted area should be draggable as well.
TOOLS PANEL:
Brush: detect edges while painting on masks (for manual mask refining. It would work similar to the Replace Color Brush, but only for masks and alfa channels). It also needs a shortcut to set the opacity.
Dodge & Burn: Protect Tones should be allowed when painting on masks or alfa channels (for manual mask refining). D&B can also use edge detection as well.
FILTERS:
Some of them, like the ones involving Blur or the High-Pass and the Unsharp Mask filter, should work in real time (these ones, at the least).
It can also added a Particle Generator Filter.
It would be really nice having the ability to create particles such as dust, fog, rain, snow, etc in a more realistic manner than just the scattering function from the Brush Palette, or by mixing different filters with different blends. The Particle Generator should have an slider to control the depth of field, so it will give a feeling of depth and also, a way to load masks, so that way, the particles can exists before the image and also, behind. It would be great for creating a nice feeling of depth (kind of a bokeh effect).
I've been playing with After Effect few times, and the way to create shapes and forms from nothing is the way of easier than in Photoshop.
TIME LINE:
I think it's time give dynamism the filters applied to a movie clip, and also, dynamics to the fade effects, like it happens in After Effects by adding Bezier Curves.
HISTOGRAM:
It should be possible to zoom in into the histogram, for a more precise feedback and analysis of the image tonal values.
ADDITIONAL FEATURES:
The fade tool should work in real time.
Loupe/Magnificator View:
This is very useful when it comes to edit and image in detail, with a lot of zoom, like 3200%. Unfortunately, Photoshop doesn't provide a real time feedback in an additional window, such as the Window/Arrange/New Window For […].
It would be really useful having a window showing the image at fit on the screen while working on the other window at 100% or 3200% of zoom, but in real time. This way, you can see if you're doing a good job on the pixels or, if you're overdoing it.
It happens that, when working with big images at 100% of the image size (or more), the brain cannot figure out how is looking the whole image, so having a realtime feedback in the other window would help a lot for detailled work.
And why not, ading the same real time structure descrived above but to the Navigator, for faster and lighter use of the hardware capabilities. Probably, adding a check box to the navigator that blocks it to a given zoom, so when zooming into the image in the navigator, the image shown in the window isn't magnified too.
Give me a chance to show you some examples of what I have done by improvising particles and fog about 5 years ago:
http://mart1980.deviantart.com/gallery/5027033#/d1m119x
And what I did 7 years ago by manually, selecting different shades of gray and using just Levels for 8 hours (which coule be done faster and easier with another tool I thought, which I will post later):
I cannot post examples of the other features I'm suggesting because there are not such new features yet (I would have to create an hipothetical enviroment, but I think, you can fiure it out in your mind).
Unfortunately, I don't know programing, even though, I tried something with Filter Factory, achieving good results, but that pluging consumes too much resources and/or is bad designed/have not the right tools for certain things.
Hope this post is enough worthy of the Adobe's attention.
Thanks,
Ø³

This is a poorly explained reason about why is so important having a loupe in Photoshop. I've not also, used the best example, but I will. This belongs to the ADDITIONAL FEATURES: Loupe/Magnificator View:. Also, I will try to make my english clrearer, but here it goes:

New Features in Logic 8

Here's a link to the New Features in logic 8 .pdf
http://manuals.info.apple.com/en/NewFeatures_in_Logic_Pro8.pdf
{New song length is 12 hours at normal tempo}
RealDave

Thanks RealDave.
I'm still reading through the manual as well...and so far I do not see any mention of an improvement of the SRC (sample rate conversion), which was an issue.
I hope they have re-done that code in this update. I will probably email Apple, although, they never answer...so...
Cheers

New features of CRM 7.0 in Marketing

Similar Messages

Maybe you are looking for