New Field Addition in Allowed Field Catalogs -Pricing.
*Hi,
We have requirement of having Material Description field in the Allowed Field Catalogs in SPRO --> SD --> Basic Functions --> Pricing --> Pricing Controls --> Define Condition tables --> Allowed Field Catalogs in order to fetch the same for Pricing Condition Table creation with Mtrl Description as Key Combination.
Hence, as a first step, have added the MAKTX field inside the "ZStructure" (which was created before) inside Main Structure KOMP and activated the same. Then i have added the same field MAKTX in Allowed Field Catologs of Pricing using New Entries.
Now i have tried to create a new Pricing Condition Table with field catalog of Material Description (the added field), but there is no such field is available for selection.
Is there anything i missed to do, so that the newly added field is available during New Condition Table Creation with key combination of the added field.
Appreciate your promot response.*
Rgds,
Hi,
Thanks for your response.
Have added the required field in Structure KOMG now and it is available for selection in Condition Table Field Catalogs. However, am allowed to select this field only when creating a New Condition Table and if i want to add this field in the already created condition table in change mode, it thows an error message - "Function Code cannot be selected".
How to proceed further.
Rgds,
Similar Messages
-
Shipment cost pricing - new field catalog
hey ,
i want to add a new field ( air_line_company ) to condition table .
i added the field to structure komkaz and to table vttk .
what is the equivalent user exit to USEREXIT_PRICING_PREPARE_TKOMP in the shipment cost
and what code i have to add there ?
is there anything else that i should do in order to maintain this field in the condition table ?
BR
ASAHi!
It may help you to use additional fields of vt01n, as VTTK-ADD01 and customize it to show a list of all the air lines that you have in a catalog.
Logistics Execution > Transportation > Shipments > Maintain Additional Data
In this standar way you dont need any exit and can include it on pricing procedure.
Change the name of field description on CMOD transaction and you can use it.
I hope this may help you.
Regards,
RP -
New field in Pricing field catalog for Item category
Dear SD colleagues,
We have scenario of maintaining pricing for Lower level BOM component.
Like:
Base price - 100/-
When BOM explodes - 95/-.
For this, I have taken ABAPer help and inseted a Z field for Item category in Pricing field catalog.
Then, a new condition table is been generated using ZPSTYV and included in Access sequence. For Base price condition type, we have maintained record in combination with ZBOM-Item category for lower level BOM item.
A new pricing routine is created in VOFM for Condition value and same is been assigned to Condition type as Alternative calculation type in pricin gprocedure contro data.
Whe I create Sales order, value based on ZBOM is being pciked up by system.
request you to please help in this regard.
Thanks & regards,
Praveen.Hi Marino,
I have a requirement to determine the pricing based on "Discount Code", which is not a standard SAP field and i would like to have this as a custom field and linked to customer in custom table.
Question: When i add a new custom field and custom table for pricing, what are all the things i need to do in terms of ABAP.
As per my knowledge, below are the steps...Please check and confirm my understanding is correct and let me know if i miss anything.
1. Create a new field
2. Create Custome Table
3. Add field to Field Catlogue KOMG
4. Add Field to KOMP (as this is item field)
5. Add code in userexit USEREXIT_PRICING_PREPARE_TKOMP to make the data avaialable - Sales Order
5. Add code in userexit USEREXIT_PRICING_PREPARE_TKOMP to make the data avaialable - Billing
Thanks. -
Hi All,
I am adding new fields in the Sales Order which is required for pricing. The following steps were followed
New fields included in a structure and added into VBAP
The structure also included in the KOMPAZ .
Now I am trying to use the fields in creation of condition tables. But I am unable to see the fields in the field catalog for pricing. Can anyone help?
Regards,
Swarnacheck /add ur fields in this view
V_T681F
,then u will get.
Regards
Prabhu -
New field catalog VOLEH does not display while creating a new table
Dear Gurus,
I added new field as VOLEH in field catalog. However while I am creating a new table, new field (VOLEH) does not showed in field catalog...
How can I fix this error?
Kind Regards,HI
Check once again in IMG>SD>Basic func>Pricing >Pricing control>define condition table>conditions : allowed fields> go to new entries then press F4
check here newly created field is there or not
(or) when creation of condition table check properly next page button in menu bar
still if its not found
Note 21040 - Allowed Fields not appearing for condition table
or check this link
http://www.sap-basis-abap.com/sd/how-to-add-new-fields-to-field-catalog.htm
Regards,
Krishna. -
Hi,
I have to add new fields in price catalog (i.E MaterialGroup1 to Material group5
MVGR1 .. MVGR5 ) .Althought the fields has been hadded in catalog and access sequence , pricing procedure is not picking up data from sales order to determin the price component
Please suggest what user exit /enhancement required .Hi
please check out this
The routines for assigning values to the new fields in order processing are found in member MV45AFZZ. Use the following user exits:
USEREXIT_PRICING_PREPARE_TKOMK (header fields)
USEREXIT_PRICING_PREPARE_TKOMP (item fields)
The routines for assigning values to the new fields in billing are found in member RV60AFZZ. Use the following user exits:
USEREXIT_PRICING_PREPARE_TKOMK (header fields)
USEREXIT_PRICING_PREPARE_TKOMP (item fields
If useful reward points
MBS -
Hi,
this is he requirement for ISU non energy price which is maintained in SD .
the requirement is as follow
1 Need to add a new field for special type of customer PSR..which is not available in standard sap.
2 I need to detrmine pricing customer specific. in SD fro example standard customer is chared 1.50
£ /unit and PSR type of client is charged 1£. so what are the socsideration need to been taken to
determine the price ..
3 In which SD table the price is stored where i can add these new fields
your quicker reply help me to reach dead line..
thanks in advanceHello Deepak,
As per my understanding of your problem following can be the solution to your query.
Well, Maintain condition tables in your access sequence as per your requirement. For instance: you can have access sequence as:
No.....Table...Table Desc.
10......5.........Customer/Material
20......6.........Price List Type/Currency/Material
30......6.........Material
And after that add this access sequence to your Condition Type
OR
For existing table with existing access sequence use Field catalog to add table to existing Access sequence.
In both cases, maintain the Condition Record as your requirement using your access sequence as per desired combination e.g. Customer/Material.
Hope it solves your query or revert back.
Take care.
JP. -
New field for Pricing in KOMPAZ
Hello All,
Have a question about adding a Item Category field in KOMPAZ. We have a need to extend the field catalog by adding a field in KOMPAZ. One of the notes say to add to KOMPAZ, does this mean I have to add specifically to KOMPAZ in which case I am requiring to register this structure or can I use the APPEND STRUCTURE and add my NEW FIELD in the append structure.
One more question is, would it be a CORE MODIFICATION if I register KOMPAZ and add my new field?
Please advice me.
SMA.You should use the append structure
.APPEND ZAKOMPAZ to add your fields.
In that case it will NOT constitute as core code modification. -
Dear All Experts,
My client having some custom requirement in Production Order.
1) When Production Order will created and its status will released then it will allowed user to update any quantity of any items or add any new items but it will not allowed to delete any items from row level.
2) When any item will be deleted then our transaction notification will be raised.
I created one Transaction Notification Code but it will restricted to update anything or delete.
IF (@transaction_type = 'A' or @transaction_type = 'U') AND @object_type = '202'
BEGIN
Declare @VisOrder1 nvarchar(255)
Set @VisOrder1=(SELECT Top 1 T1.VisOrder+1 FROM OWOR T0 INNER JOIN WOR1 T1 ON T0.DocEntry = T1.DocEntry
WHERE (T0.Status = 'R' and T1.VisOrder=(select TOP 1 VisOrder from wor1 where DocEntry=@list_of_cols_val_tab_del order by VisOrder Desc)))
If @VisOrder1 >0
begin
SET @error = 231
SET @error_message = 'You have not rights to delete any Item - Please Contact System Administrator ' + @VisOrder1
end
END
Please help me for solve this problem.
I wait for your warm replay.
Thanks & Regards,
Nishit MakadiaHi,
Please check these threads. Let me know your feedback.
http://scn.sap.com/thread/3518208
http://scn.sap.com/thread/3545101
Thanks & Regards,
Nagarajan -
New field (Customer group 5) to be added to the Catalog for Pricing.
Hello friends,
For the creation of a new Condition table, I require the field, KNVV-KVGR5 i.e Customer group 5 field present in Sales area data ->Extras -> Additional data in Customer master to be added to the Catalog of allowed fields since this field does not exist anywhere.
I have already gone thru the threads available on adding New field for Pricing which has an example/detailed explanation with the Item category (PSTYVV) field.
But the field I want i.e KNVV-KVGR5, is a part of Master data, so please guide me with the steps to follow to add this field in the field catalog and hence use it for creation of a new condition table.
1) Should i add this field in KOMP (i.e item) or KOMK ( i.e Header) or KOMG?
2) Should i include it in KOMKAZ or KOMPAZ?
3) Should i create this field as data element or structure and what should be the domain used?
4) For the value flow, should i use the Item -level user-exits or Header level mentioned in other threads?
Please guide for the same urgently.Dear Friends,
I was finally able to create a new field for Cust.grp.5 i.e ZZKVGR5 and added to Catalog to be used for Pricing.
Then i faced a peculiar issue as below:
For the business requirement, we defined a new tax condition table for determination of tax rates. For this, we are using both standard and custom fields to derive the correct tax rates in sales/billing documents like below
A859: Country/Distr. Chl/Cust.grp.5/Material (Here Customer.grp 5 was added following the SAP Note: 531835)
The field was inserted in the communication structure KOMKAZ which is included in both KOMK and KOMP.
During the document processing, the pricing analysis view shows no value in the customer grp 5 field, though it is maintained for the customer used in the sales order. The code has been written in MV45 and RV60 both as guided in SAP Note: 531835. But the values are not flowing.
Solved the above problem as below:
M posting the answer to help the community for similar issue.
Also, the new field tat i had added was Customer Grp 5 field of Customer master ->Extras->Additional field and I wanted the value to flow in the ZZKVGR5 field before the Pricing for the sales order was called.
After trying all, we have finally fetched the value from KNVV-KVGR5 and got it moved to ZZKVGR5 field through ABAP coding.
After this when i select/click on Pricing for a particular item, it gets picked up correctly and properly.
Thanks to everyone for their valuable guidance and help.
Regards to all. -
New Field Addition in Structure KOMP
*Hi,
We have requirement of having Material Description field in the Allowed Field Catalogs in order to fetch the same from Pricing Condition Table. Hence, as a first step, have added the MAKTX field inside the ZStructure inside Main Structure KOMP and activated the same. Then i have added the same field in Allowed Field Catologs of Pricing.
Now i have tried to create a new Pricing Condition Table with field catalog of Material Description (the added field), but there is no such field is available for selection.
Is there anything i missed to do, so that the newly added field is available during New Condition Table Creation with key combination of the added field.
Appreciate your prompt response on this.*
Rgds,Hi Ravi,
Please check the following thread;
Re: Pricing - Adding new field to pricing catalog
also the following link
http://www.sap-img.com/sap-sd/how-to-create-field-in-komp-komp.htm
Hope this will help
Regards
Chandra -
Add a new field to field catalog in billing output
Hi Experts
can anyone tell me whether I can add 'item category' to field catalog for application V3. and how can I do this? I want to create an access sequence-bill to party/item category, is that possible?
thanks a lot!
ellyHi..
Below is process of adding filed to catalogue in Pricing..
Follow below procedure as its same as condition technique...
Add a field to a new condition table in Pricing (Condition Technique):-
I will explain you the process with below example...Please follow steps in below sequence-
Try to add the filed from the field catalog. In case the required combination field is not there, you can add the field through the following process to filed catalog and create the condition table. It is most common that one or other time we need to use this function while configuring multi tasking & complex Pricing Architecture.
Here I'm giving a simple guide to add fields to the Pricing Field Catalogues:
For example you want to use field PSTYV ('Sales document item category') that is included in structure KOMP ('Pricing Communication Item') as a key for a condition table.
When you create a condition table (Transaction V/03), however, the system does not propose the field in the field catalog.
Condition access, field catalog, allowed fields, KOMG, KOMK, KOMP, KOMPAZ, KOMKAZ, PSTYV are the other terms which we need to know about, to add Fields.
Reason and Prerequisites:
For technical reasons, field PSTYV was included in structure KOMP, however, not in structure KOMG ('Allowed Fields for Condition Structures').
Proceed as follows:
1. Call up the ABAP Dictionary (Transaction SE11) and create data type ZZPSTYV. Choose PSTYV as a domain.As a short text, you can use, for example, 'ZZ - sales document item category' and as a field label, you can use the field labels of PSTYV.Save, check and activate your entries.
2. Call up structure KOMPAZ in the ABAP Dictionary (Transaction SE11) in the change mode and make the following entry:
Component Component type:
ZZPSTYV ZZPSTYV
Save, check and activate the change you made.
3. Note:Because of the change in structure KOMPAZ, field ZZPSTYV is now known in structures KOMG and KOMP because structure KOMPAZ is included in both structures.
4. Call up Transaction SPRO. Navigate to 'Sales and Distribution -> Basic Functions -> Pricing -> Pricing Control' and execute 'Define Condition Tables'.
Choose 'Conditions: Allowed fields' and include ZZPSTYV as a new entry.
5. Note:Now you can use field ZZPSTYV as a key field when you create a condition table Axxx.
6. Supply the new field you defined by including the following source code line in USEREXIT_PRICING_PREPARE_TKOMP:
MOVE xxxx-PSTYV TO TKOMP-ZZPSTYV.
In order processing you find the user exit in Include MV45AFZZ, and in billing document processing you find it in Include RV60AFZZ.
Consider that you can also use this note as a help if you want to use other customer-specific fields as key fields in a condition table.
For header fields, use structure KOMKAZ instead of structure KOMPAZ and
USEREXIT_PRICING_PREPARE_TKOMK instead of
USEREXIT_PRICING_PREPARE_TKOMP.
For more information, see Transaction SPRO via the path 'Sales and Distribution -> System Modifications -> Create New Fields (Using Condition Technique) -> New Fields for Pricing' and OSS Note 21040.
REWATD IF U FINDS THIS AS HELPFUL..
Regds
MM -
Field Catalog (Output Billing) for new Condition Table
Dear all,
I am struggling with new Field Catalog Fields for my Condition Table
To determine two different printers I have tried to add ERNAM (SAP author of document), and to print or not to print certain documents depending on Customer Number (Proforma and Packing list) I have tried to add KNDNR
No matter which field I add, the system warns me "Choose the key from the allowed namespace"
and in the Acces Sequence later on I am getting a red flag.
So far I have gotten advise that I need to ABAP user exits, create tables and lots of tech stuff.
I want to configure the system, not program it.
So: Can I add fields to the Field Catalog without being an ABAPPER or can I not?
Thanks,
NickelodeonHi,
You can add the field in the OUTPUT COMMUNICATION STRCTURES
OUTPUT COMMUNICATION AREA for Billing is KOMKBV3 and the Include is KOMKBZ5.
If you want to add the new field ERNAM then add this field from the VBRK
Enter the field ZZERNAM in the commnication strctre KOMKBV3 in the include KOMKBZ5 in the data dictionary
By entering the field in the Include KOMKBZ5 you automatically include it in the commnication structre KOMKBV3
Next add the field ZZERNAM in the communication table KOMB
Now assign the values to the field in the FUNCTION MODULE KOMKBV3FILL_
Include the ZZERNAM in the field catalogue for the CONDITION TABLE of Billing documents .
After doing this you can check the new field in the FIELD CATALOGUE in the CONDITION TABLE for OUTPUT DETERMINATION.
Please try this for your Application area ( as i gave example for Billing documents) and revert back if you need any more details
regards,
santosh -
Sales Employee VRTNR is missing in Field Catalog
Hi,
I can identify the field Sales employee - VRTNR in Field Catalog(Pricing Sales/Distribution) but it is not availble to select when creating the condition table.
I can see other fields appearing but not the sales employee which I can find in Conditions: Allowe Fields.
Please let me know what I am missing here?
Thanks,
Rahim
Edited by: ARahim on Feb 13, 2010 11:38 AMhttp://www.sap-basis-abap.com/sd/how-to-add-new-fields-to-field-catalog.htm
Try the above link which may provide additional insight as to recognizing the field once it is added to the field catalog. -
Hi
For a discount condition type I want to create a new condition table with a filed which is not in filed catelogue. So what and all the entire procedure I have to do.
thns & rgds
rajuHi,
Please find below the information how to add a new field to the field catalogue Ex. Profit center is the new field i wish to add, then
For adding field into Field catalogue:
you should first identify the field for Profit Center (Design ID) and then do as follows:
For example if you want to use field PSTYV ('Sales document item category') that is included in structure KOMP ('Pricing Communication Item') as a key for a condition table.
When you create a condition table (Transaction V/03), however, the system does not propose the field in the field catalog.
Prerequisites:
For technical reasons, field PSTYV was included in structure KOMP, however, not in structure KOMG ('Allowed Fields for Condition Structures').
To solve the problem, proceed as follows:
1. Call up the ABAP Dictionary (Transaction SE11) and create data type ZZPSTYV. Choose PSTYV as a domain.As a short text, you can use, for example, 'ZZ - sales document item category' and as a field label, you can use the field labels of PSTYV.Save, check and activate your entries.
2. Call up structure KOMPAZ in the ABAP Dictionary (Transaction SE11) in the change mode and make the following entry:
Component Component type
ZZPSTYV ZZPSTYV
Save, check and activate the change you made.
3. Note:Because of the change in structure KOMPAZ, field ZZPSTYV is now known in structures KOMG and KOMP because structure KOMPAZ is included in both structures.
4. Call up Transaction SPRO. Navigate to 'Sales and Distribution -> Basic Functions -> Pricing -> Pricing Control' and execute 'Define Condition Tables'. Choose 'Conditions: Allowed fields' and include ZZPSTYV as a new entry.
5. Note:Now you can use field ZZPSTYV as a key field when you create a condition table Axxx.
6. Supply the new field you defined by including the following source code line in USEREXIT_PRICING_PREPARE_TKOMP:
MOVE xxxx-PSTYV TO TKOMP-ZZPSTYV.
In order processing you find the user exit in Include MV45AFZZ, and in billing document processing you find it in Include RV60AFZZ.
Consider that you can also use this note as a help if you want to use other customer-specific fields as key fields in a condition table.For header fields, use structure
KOMKAZ instead of structure KOMPAZ and USEREXIT_PRICING_PREPARE_TKOMK instead of USEREXIT_PRICING_PREPARE_TKOMP.
For more information, see Transaction SPRO via the path 'Sales and Distribution -> System Modifications -> Create New Fields (Using Condition
Technique) -> New Fields for Pricing' and Note 21040.
For creating a condition Table:
1) There are almost all the regularly used Conditon Table predefined in the system from 001 to 500.
See what best you can use the Standard Tables to avoid further errors.
2) In case you should define the new condtion Table,
a) Goto TCode: V/03
b) Give a Table any number from 501-999
Press execute and reach to next screen.
c) Check up whether the field you are looking is already added in Field catalogue.
d) Double click on the fields you want to make a Table..one by one. Note that the sequence here is important in higher hierarchical to lower..
Eample : Sales Org, DC, Division, Customer and then Material etc..,
e) After selecting, click on the Techincal View buttin (redone) and reach to next screen.
7) Check which key should be in header and which key should be footer. Use check and uncheck functionalities there..
8) Once you are through with all the above steps ..click on generate button.
Check the Table is generated or not.
You can check it at V/04 or V/05 or in SE11.
Regards,
Ravi Duggirala
Edited by: ravi duggirala on Jun 9, 2008 10:48 AM
Maybe you are looking for
-
How can I prevent deleted mail from ending up in "All Mail" and "Archives"? To my horror, I emptied these boxes and lost all my mail from all my boxes . All mail also disappeared from my iPad, I suppose because they are "synched" (Also, no offense,
-
We have a Webservice deployed on a Sharepoint 2010 deployment with a method as follows: public static string ensureParentFolder(SPWeb parentSite, string destinationUrl) destinationUrl = parentSite.GetFile(destinationUrl).Url; int index = destinationU
-
Hi, I am totally confused. I am trying to create a report which uses 3 parameters. The user uses 2 parameters to get the 3rd parameter. the 3rd parameter is also being used in creating view. The report uses the view to get the data for the report. I
-
hi any1 pls help... how do i validate a jsp form which has example "x" textboxes with same name of choice<%=i%> and when i increase "i" i have another group of choices with another set of same names called choice<%=i+1%> i try using the code below bu
-
Printing formatted Soap Message in conole
Hello, I have written one service and one SOAPMessageHandler, in this class i need to print formatted soap message,but how i dont know here is my code: SOAPMessage soapMessage = context.getMessage();