New field in Activities PCUI CRM 5.0

Hi SDN,
In Activites (under Details Tab)screen we want to have Completion field which is already there in CRM GUI.
For Activities(CRMD_BUS2000126), I can see two different Field groups like ACT_DETAIL and ACT_DETAIL_50.
and I have found COMPLETION field in structure "CRMT_BSP_ACT_DETAIL".
In ACT_DETAIL_50 , there is reference field group ACT_DETAIL_50_CLASSIFICATION. I have added feild "Completion" in this field group.
And I have generated Layout.I have previwed from PCUITOOLS but still I canot see the new field.
I dont know where it is going wrong. Can any one guide me regarding the same.
Appreciate your help.
With Regards,
Ravi.D

Hello,
In which release are you working?
Which field group did your regenerate?
Did you see the field in PCUITOOLS?
If yes, is your portal connected to the same client?
Regards,
Fred

Similar Messages

How to create new field while upgrading from CRM 4.0 to 7.0

Hi ,
How do we create new field on UI and store data into existing field in database?
Is there any option in AET to skip the creation of new field in the database table ?
Custom field is already created in GUI and database table while using CRM 4.0
Now, after upgrading to 7.0 EHP3 , I need to bring this field on the UI .
Using AET may create new field again in the database table.Please suggest.
New filed needed to be created in Marketing Campaign Element Header data.
Thanks
Jayasri

Hi Jayasri,
As a custom fields are already there in crm 4.0. You don't need to use AET again to add field.
These enhancements still exist after the upgrade. Dependent on the enhancement object and type some manual steps are necessary.
For example regarding a single field enhancement for the BP the whole framework is enhanced after the upgrade. There is only one manual step to bring the field on the relevant view(s) via the UI Configuration Tool. For whole BP tables some more manual steps are necessary, these steps are described in the note 1069791 - CRM WebClient UI for EEW enhancements (reference to more notes regarding the EEW after the upgrade).
For set types, we need to generate UI With the help of the UI configuration tool the settypes could become visible in the Web UI.
I didn't understood your scenario, can add little more information why you want to add field by AET if available in DB?
Refer
FAQ - SAP CRM Upgrade from release 4.0 to 7.0
Regards,
Arjun

How to add new fields in CRMD_CUSTOMER_H in CRM 3.0 ?

Hi,
I I have a requirement in CRM 3.0 to add a new field to crm structure CUSTOMER_H but not sure how to do this. I know in 7.0 we have transaction EEWB to do this but in 3.0 i have no clue. Please help how to do this. Thanks in advance!
Regards,
Bhanu

Moved this over to CRM General & Framework.
Firstoff technically SAP CRM 3.0 is not even supported in general maintenance by SAP. However for memory lane, extensions in CRM 3.0 must be coded manually. EEWB did not exist until CRM 4.0. In general there should be a CI include in CRMD_CUSTOMER_H where you would put your fields. The drawback is that you need to extend the BDOC structures and write the exits to populate/receive the fields on the inbound outbound bdocs manually along with the transfer to BW.
BTW since it is CRM 3.0 you probably have bigger problems than this, but that's just my opinion.
Wow this makes things feel like 2002/2003 all over again for me.
Take care,
Stephen

Adding new field to sale order BDOC and replicate to R3

Hi all,
I'm trying to map the new customize field in CRM to field VBKD-VSART in R3.
The reason behind this was because my customer would like to have field shipping type appear in CRM order, but since this field is not provided by SAP, I've to create it.
What I did was:
1) Create new field VSART via EEWB in CRM. This is done and working fine, the field appeared in 'customer fields' tab.
2) Put this new field to BDOC in CRM. I believe this is done when I created via EEWB. I think it use BADI CRM_BTX_EXTENSIONS , implementation CRM_GEN_OBJECTS for this part.
3) Put BDOC into BAPI in CRM. This is the part that I'm having a problem with.
I found that I need to use BADI CRM_DATAEXCHG_BADI for that and I've checked example from implementation CRM_BTX_EEW_DATAEXCH. However, it only contain example to input field in VBAK, VBAP and VBEP. Can anyone guide me on this part?
4) Map BAPI to R3. I think that I need to use userexit MV45AFZZ form USEREXIT_MOVE_FIELD_TO_VBKD for that. But what is the incoming structure that I could use to map with VBKD.
Any help would be appreciate, Thank you in advance.
Gilbert

Hello Gilbert,
Please find if this helps,
BDOC's to update the custom fields in R/3 from the CRM sales order
Replication of new customer fields in order to R/3
regards,
Muralidhar Prasad Chatna.

Adding a new field in EEWB and pulling this to IC 4.0

Hi All
i am trying to add a new field thro EEWB in CRM 40 and link to CRM IC . I have successsfully added the field and the same is now appearing in the IC webclient.
Now I need to passvalues Yes and No and the deafult shall be blank in a drop down list box
How to pass the values. Please forward the code to attach in BSP and where.
Also I need to make this field as mandatory and a error message should be visible in the IC
I shall reward points
SURYA

Hello,
I have looked at wiki below [http://wiki.sdn.sap.com/wiki/display/CRM/Howtoaddanexistingfieldtoasearchpageofadifferent+component]
Kindly suggest ways to acheive adding new field in Opportunity Search ( employee responsible which is not the main contact like I mentioned ) which belongs to another component ...Can it be done without coding eg. adding to design layer.
Can you please give steps to do the same.
Thanks.
Regards,
Monica

New Field value not displayed in "My own activities" of CRM 5.0 Own tab

Hi.
I have a scenario where in we have added a new field to "My open activities" in CRM 5.0 Own tab.
However the value of the field for various transactions is getting displayed only for one particular user and not for all the users.
what may be the reason for this?!!!!!!
The only user who is getting the output properly, the user ID of his was replication based on similar roles to check whether it was issue related with roles. But the output was not obtained even with the replicated user ID.
Hence the output continues to come only for one particular user in all the systems.
Kindly request to provide some inputs / suggestions at the earliest.
Thanks and regards.

Is aanyone able to help with this?
Thanks

CRM PCUI (Imp): Adding new fields & Webpage display in ODC1

Hi Gurus,
Plz help in these PCUI related configurations:
Query 1.
PCUI: Adding custom created field in a new TAB (BSP Iview)
Steps Done
a. Custom field defined in an object (say Opportunity)
b. An event created.
c. A Group Tab Page created
d. A Field group created and a new field name added to the field group (What structure need to be added to this field group?)
e. Entry made in Application Layout for an application i.e. event / position / screen element / tab page / structure. (Again what structure to be added?)
To handle this new field & tab, plz advice
1. What needs to be entered in the screen structure? Do we need to create this structure?
2. The required the model access class defined for the screen structure.
3. Any changes required in the controllers
(Where is the linking between custom field defined in the opportunity object and the new field entry made in the filed group)
Query 2.
Calling a webpage in a tab (ODC1, Detail area)
Opening a webpage in an iview can be done easily by reating a URL iview.
If the requirement is to open a web page in ODC1, than what are the steps required for the same?
e.g. On clicking a user defined tab the webpage should open in the detail area 1.
Query 3.
We have extended an object (say field addition in opportunity header) through EEWB
Will the added filed be available in PCUI screen also?
Regards,
SAURABH

Hello SAURABH,
welcome to the SDN Community. Please do not crosspost:
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=66550&messageID=707519">CRM PCUI (Imp): Adding new fields & Webpage display in ODC1</a>.
Regards
Gregor

SAP CRM 7.0 - Interactive reporting tool enhancing reports with new fields

Hi Everyone,
I am a BW Professional, currently working on evaluating the true benefits of implementing Interactive Reporting tool for our company. As I understand the Interactive reporting tool restricts us to report on individual reporting areas like Activities, Leads, Opportunties etc.
But according to our business it is very important for us to be able to report on cross reporting areas real time i.e. activities & leads together or activties, leads & opportunties together etc.
I learned about the enhancement work bench in interactive reporting tool where we can add SAP fields to individual reporting areas, so I thought of adding leads & opportunties to activities. This is where the fun part starts.
Here I learned that all activty ID, Lead ID and Oppo ID are all fed from one single field from SAP CRM i.e. OBJECT_ID, which means the system is dividing this data into individual reporting areas based on type of data i.e. leads or oppor's etc. and may be based on some key like account etc. So here is a technical question, for me to add a new field to a reporting area I have to give a field name but we already have OBJECT_ID from where I am pulling activties data, so if I want to include leads also in activties then I will have to add some logic manually to get that and can't use enhancement workbench because it is for missing fields from SAP CRM whereas in my case I already have OBJECT_ID from where I am getting Activity data.
Sorry if I am driving you guys crazy but I am just trying to think loud to make myself clear with concepts.
Also I have seen that a reporting area in Interactive reporting tool is based on a BW query, but I am not sure why not all the fields in BW query are available for reporting in Interactive reporting tool?
Any help or commets will be greatly appreciated.
Thanks & Regards,
SRV

Hello,
checking with the config wizard is always a good idea since it's the only supported way to configure this scenario
The secret is that you apparently did not activate the report areas. It is a bit missleading that the queries are checked before the report areas are checked, therefore you see the errors concerning the queries first. Below those errors you should find some lines like
 Report areas: delivered 15, active <?>
 CRM interactive reports: delivered 20, active <?>
 Activation of report areas checked
The last line offers some documentation and the actual link to activate the report areas.
Best regards

How to add new fields to CRM 2007 Web UI

Hi,
I am new to SAP CRM 2007 and I am interested in how to extend the Web UI, for example adding new fields, to meet the customer requirements. Should I use the EEW or is there another "new and easier" way?
Thanx & best regards,
Oliver
Edited by: Oliver Pregler on Jan 30, 2008 5:50 PM

Actually for the new IC webclient UI you have need to take a look at your options:
1. New Installation:
Use the EEWB and add the fields. As part of the EEWB work, you will have a couple of post-processing steps where you will add your generated fields to the new screens. However this doesn't require any programming.
2. Upgrade from CRM 4.0/50
- New fields to add as part of upgrade
See the directions for new installation
- Existing fields to add as part of upgrade
--See the blog on the 40/52 CUSTOMER_H migration for transaction fields
--Business Partner fields part of BUT000 available via UI configuration tool, no extra work needed
--Business Partner fields part of tabular extension, manual work required, I am still "perfecting" this method and plan on writing a blog once I have the technique finished.
--Product Attributes - use the transaction CRMM_UI_PROD_GEN and CRMM_UIU_PROD_CONFIG
I know CRM 2007 is based on the same tech foundation as 2006s, with some differences in how the UI tool works and the fact there are some screen layout changes(editable overviews). The extension procedures are generally the same. I can answer some of you extension questions based on my work with CRM 52 so far. It will generally apply to your situation.
BTW: The PCUI is no longer supported in CRM 2006s and above. Even the old SAP GUI transactions such as BP, COMM_PRODUCT are removed from the standard CRM menu. The SAP CRM web client should be used instead now.
Take care,
Stephen

How to add new fields to CRM contract Product List tab?

Hi all!
I would like to add a new custom field for CRM contract (CRMD_BUS2000121) item level, on the Product List tab.
Here I found CRMT_0100A_ORDPRP_I_EXT_UI structure, therefore I enhanced this with new append structure and new fields.
I also added the new fields to ORDPRP_I append structure and mapped the new fields in CRMC_MAP.
For some reason the new fields are on the screen but they are grey, not changeable. What did I do wrong?
Thanks,
Tamas Pentek

Actually for the new IC webclient UI you have need to take a look at your options:
1. New Installation:
Use the EEWB and add the fields. As part of the EEWB work, you will have a couple of post-processing steps where you will add your generated fields to the new screens. However this doesn't require any programming.
2. Upgrade from CRM 4.0/50
- New fields to add as part of upgrade
See the directions for new installation
- Existing fields to add as part of upgrade
--See the blog on the 40/52 CUSTOMER_H migration for transaction fields
--Business Partner fields part of BUT000 available via UI configuration tool, no extra work needed
--Business Partner fields part of tabular extension, manual work required, I am still "perfecting" this method and plan on writing a blog once I have the technique finished.
--Product Attributes - use the transaction CRMM_UI_PROD_GEN and CRMM_UIU_PROD_CONFIG
I know CRM 2007 is based on the same tech foundation as 2006s, with some differences in how the UI tool works and the fact there are some screen layout changes(editable overviews). The extension procedures are generally the same. I can answer some of you extension questions based on my work with CRM 52 so far. It will generally apply to your situation.
BTW: The PCUI is no longer supported in CRM 2006s and above. Even the old SAP GUI transactions such as BP, COMM_PRODUCT are removed from the standard CRM menu. The SAP CRM web client should be used instead now.
Take care,
Stephen

New field in CRM datasouce is not replicated into BW datasource

Hello Everyone
I am hoping you will be able to help me. We have created a new field on our CRM Activities datasource CRM_SALES_ACT_1. This datasouce is currently active and we are using a delta update to our BW system. We have added a new custom field to this datasource which is being populated in CRM (I have checked this using RSA7). However, when this datasouce is being replicated in BW it is not bringing across the new field into the datasouce. We replicted the datasources when the delta queue had been cleared down.
Please can anyone suggest what else I can try, Do I have to delete the current initialisations, and then recreate them using initialisation without datatransfer?
We are using BW3.5
Many thanks
Gareth

Hi Gareth,
I am currenlt involved BI 7.o implementation for CRM analytics (CRM 2007). I am working on a UK council project. I am first time working with CRM.
Mainly we have to provide reports on,
service tickets,
Activities,
Survey
ERMS etc..
Can you please provide some design documentation if you have?. Please can you also let me what all masterdata required....
Thanks,
Sudha

PCUI 4.0, Search Help Required for New field

Hi everyone
I am working in CRM 4.0 Sales Order application
We created a new field in CRM sales Order in Header level in SAP GUI through EEWB.
The search help for the new field is working fine in SAP GUI. We want to add the same field with F4 help functionaliity in PCUI as well.
The field has been added in structure CRMT_BSP_SLS_OD1_General. It also shows domain value for the field however Origin of input field ie empty
The field has been added in PCUI and is successfully showing data inputted in SAPGUI
However we need search help functionality for the field
i tried these two steps
1) i checked on domain value checkbox and changed the field from input to dropdown. However the dropdown is empty in PCUI. Whenever i check box domain values for some field then all the possible values in SPA GUI are displayed in PCUI, however this is not working here.
2) I put Value_table in F4 of the field
This is also throwing up empty values
Am i missing something in this case
Please let me know how to go about it
TIA
Asad

Hi Frederic
Thanks for your response
I am not sure what is meant by regenerating the field group in this case
I added the entries for my view in the field group and generated the layout of the field group (If this is what you mean)
The field is working fine. I am able to save values to the field and able to see values saved in GUI.
I haven't linked search help of the field in PCUI
I am not sure how to go about it.
I used the data element in the structure for the field.
The data element has Domain entry in Entry Help/Check of the structure
If i check the Domain Value checkbox in my field group then the domain values should be available in dropdown if the field is dropdown
However i am not able to see the possible values of the field (It is present in SAP GUI)
Does something else needs to be done in this case
TIA
Asad

How to add a new Field to the WEB User Interface in CRM 2007

Dear experts,
I have been struggling to add a new field to the (CRM 2007) user interface from available fields for a specific view.
I have maintained settings in BS__WD_CMPWBàRuntime Repository editoràComponentàViewàConfigurationàNew ConfigurationàAvailable FieldsàField Propertiesàand save.
But the field is only appearing in display mode in the Web UI, which doesnu2019t allows any user input.
I need your help to resolve the issue, I would be grateful if you could provide step-by-step documentation with screenshots or any other kind of documentation.
Each suggestion will be appreciated.
Best regards,
Raghu ram.

Hi Raghu Ram,
I think you added a new custom field using some method like EEWB etc.,
Then, you are adding the field onto the UI using UI Configuration Tool .. right ?
These are the steps to diagnose:
Method 1.Check the field properties in the model browser first.
It should be showing 'C' i.e., CHANGEABLE. If it is showing as 'R', it is only READABLE.
In such a case you need to find a BADI to change the field properties.
For example, in Marketing Applications OBJ BADI has a method CHANGE FIELD PROPERTIES for this purpose.
Method 2. Debug and check what is the value coming for RV_DISABLED parameter in the GET_I method in BSP_WD_CMPWB. This should be FALSE.
Method 3. Check what are the field properties in the UI Configuration tool.
Make sure it is not a display only field.
Regards,
Masood Imrani S.

What are the steps for adding a new field to the ST for CRM 2007?.

Yeah, I know it's a basic question. I'm fairly familiar with CRM 5.0 but 2007 is new to me and there a good few changes.
If I need to add a new field (probably with some processing to set its value) to the Service ticket what would be the steps I need to take to achieve this in CRM 2007?.
Your help would be much appreciated.
Jas.

Are we talking about the EEW Business objects displayed in the EEWB as there is no business object called 'CRM OPPORTUNITY', but there is one called 'OPPORTUNITY'. Just wanted to make sure I was on the right track.
So, as I need to change the service ticket it would mean that my transaction type will be service request,or whatever the shorted value is, is that correct?.
I can see the transaction types in table CRMC_PROC_TYPE_T, although it looks like I need to pick SRVO (Service order) at a guess, and if this is right I'm looking for the EEW Business object to match. But it feels like guesswork to me. For example, I could choose EEW Business object 'SERVICE_TRANSACTION' which has an Extension type of 'CUSTOMER_H', or I could choose EEW Business object 'SERVICE_CONTRACT' or 'SERVICE_CONFIRMATION', although the last is unlikely. But, my point is there is so much open to interpreatation, and I'm expecting it to be more exact. Perhaps I'm just missing something.
Jas.
Edited by: Jason Stratham on Sep 4, 2009 2:30 PM
Edited by: Jason Stratham on Sep 4, 2009 2:39 PM

Creation of new field in CRM activity screen

Hi CRM Experts,
I need some help regarding this issue.
Now when executing the campaign in the CRM system the results are not showing the function code.
We need the function code to visible when executing campaign.For this we need to add new field in CRM activity screen.
And the function code values are stored in the BUT051 table and field name PAKFT and Data element BU_PAKFT.
When we executinmg the campaign FUnction also should be there in the selection criteria.
Please help me how to create new field and assign this function code in the search results.
Please reply me ASAP.
Thanks in Advance
Regards,
rahul

Hi JC,
The context node that you are using is a mixed node, so from this node you need to get value node so that you can cast the value into cl_bsp_wd_value_node.
Here's the sample code for getter and setter method of that attribute:
DATA:
lr_mixed TYPE REF TO cl_bsp_wd_mixed_node,
lr_value_node TYPE REF TO cl_bsp_wd_value_node.
lr_mixed ?= current or lr_mixed ?= iterator. " use either of the code i dont have system right now
lr_value_node ?= lr_mixed_node->if_bsp_wd_ext_property_access~get_value_node( ).
Here, from lr_value_node get the property access method and set the attribute value to VALUE parameter.
Thats it
Thanks,
Bhushan

New field in Activities PCUI CRM 5.0

Similar Messages

Maybe you are looking for