New field in infotype 9004
Hi
We have a infotype 9004, and we needed to add one more field to this. I've already add the file to PS9004 structure and inserted this field in screen. But when I open PA30 this field is disabled to input even though this is an input/output field. What step I missed?
thanks
Did you give the Module Pool as MP900400 & Screen No as 2000 and then hit Enter?
Beyond that I have no clue.. as those are the steps I normally follow..
~Suresh
Similar Messages
-
Create New Field in infotype 0001
Hi
Can any body guide me how to create new field in Infotype 0001,
i want to create two new fields with six reasons in each new field
ThanksHi,
his can be acheived through enhancement. Hope these link helps
http://help.sap.com/saphelp_erp60_sp/helpdata/en/4f/d526be575e11d189270000e8322f96/content.htm.
General steps are
Step 1
Using transaction PM01 chose the 'Enhance Infotype tab' and press the create 'All' button.
Step 2
Enter the new fields you wish to add to the Infotype.
Step 3
Once saved and activated the new fields will appear in the Infotype screen and database table
Edited by: Raghu C on Nov 4, 2009 6:15 AM -
New field in Infotype 0009- to update IFSC Code- SAP Note Required
Dear consultants,
One of my client want to maintain their employees IFSC code in the Infotype 0009, where one new field required for this to update IFSC number.
Which SAP note can fulfill this requirement, please do needful.
Thanks & Regards,
NaveshDear Supriya,
Thanks for quick responce, It is helpful. pelase do needful on below issue.
http://scn.sap.com/thread/3517340
Regards,
Navesh -
How to add one more field in infotype and PA 30 screen
Hi to all
My requirement is to add a new field in infotype and that should be reflected in PA30 screen.
Actually in my company one field require from which date the car allowance is started.
For that one date field is require on PA30 screen ..
Also suggest me which screen is suggestable for that. and also give me any othe way is possible.
Thanks & Regards
AnubhavYes .. I added the field in the structure but that field is not reflecting in PA30 screen.
please advice me .. what to do...
Thanks..
Anubhav -
Enhancement Adding a new field to a infotype
We are implementing E-Recruiting and trying to a new field to a existing infotype 5107. On the E-Recruiting page there are three frield that already exist. Country, State and City these field also in infotype 5107 too. Country and State both are dropdown box. I have to set the default value for Country to 'USA' and State to 'AZ' where can i set this? The new field will display location "county" which the user will be able to select multiple locations. I know i would have to go PM01 to add the new field to the infotype 5107. But i'm missing the third that will allow me to do this. There's IT, IT Version, IT (i don't have this on my SAP Gui). I'm not sure what to do next after I created this new field. how can put this new field this the E-recruiting webpage?
Matthew,
You can enhance your infotype 5107 from tcode 'PPCI' not 'PM01'.
Check out this Custom Infotype Creation in ORG Management
Regards,
Ahmad -
Hi Experts,
we are using portal 7.3 version,Our requirement is addition
of a new field “Leave Details” in the LTA screen with dropdown values from Infotype
2001 subtype ITEL. From the current calendar year in ESS.The new field should
be available only for the claim type LTA claim or claim against advance.
please find the below screen shot and details.
Current View
Component: HRESS_CLMS_WD_EMCR
Personalization: 4370750342A6297CC184E2B07FE6D13E
Window: W_CLM_DYN_UI
View: V_CLMS_DETAIL
Application Component: PY-XX-RS
Kindly help me how to add this field and in which method can i implement code.
Thank you in advance
Regards,
VanithaHi Shankar Reddy,
Business requirement is the new field should display the list entry in Infotype 2001 for the calendar year as selection option for employee. they would like to know ITEL subtype claim,
Example.employee no: EE#9941
As per screen shot you may see for EE#9941 there are 2 Leave requests.
So in the leave details the selection drop down menu option or any other way should be display 2 lines.
Regards,
Vanitha -
Addition of new fields to existing Infotype: Error in Quality Server.
Hi Experts,
I have added new fields by adding custom include to Infotype 4000 using t-Code PM01. It is working perfectly fine in DEV. But, in QLT, the custom Include is not attached to the P4000 structure. Independently, CI_P4000 exists in QLT.
I have checked all the Transport Requests, nothing is missing. However, The structure of P4000 is not getting modified as per requirement. What should I do?Hi Experts,
The Error was coming with Infotype 4000. I tried adding the same field by updating Infotype 4001 and it worked. So, I have used that only, and my requirement is fulfilled.
But, I am still not sure if we can add field in similar way in Infotype 4000.
Thanks to all for providing me with possible solutions!!
Regards,
Shruti Gupta. -
Add new field infotype "z" in logical database selection screen pnp
Can add new field infotype "z" in logical database selection screen pnp
I could explain how to realize
ThanksIn case to somebody it interests to him: TO EXTEND SCREEN OF SELECTION WITH OPTIONAL DELIMITERS The case that can be given in a screen of selection of a logical data base it does not appear a certain field that we need in the filter, the steps that will be due to follow are the following:
u2022 To create a view of selection in agreement with the fields that we want to show To review the following Link http://help.sap.com/saphelp_46c/helpdata/es/6e/6ed638e70ef679e10000000a114084/content.htm u2022 To assign the view of selection to a class of report
u2022 In the code of report to create select option in the selection screen that allows to introduce imput to leak and after start-of-selection to put the following code,
"Allocation operative area to optional delimiter
IF NOT p_aroper IS INITIAL.
DATA: lt_texpr TYPE rsds_expr OCCURS 0 WITH HEADER LINE,
wa_texpr TYPE rsds_expr,
lt_rsds_expr_tab LIKE rsdsexpr OCCURS 10 WITH HEADER LINE,
wa_rsds_expr_tab LIKE rsdsexpr.
REFRESH lt_rsds_expr_tab.
wa_rsds_expr_tab-arity = '0'.
wa_rsds_expr_tab-fieldname = 'OBJID'.
wa_rsds_expr_tab-option = 'EQ'.
wa_rsds_expr_tab-low = p_aroper.
wa_rsds_expr_tab-high = '00000000'.
MOVE-CORRESPONDING wa_rsds_expr_tab TO lt_rsds_expr_tab.
APPEND lt_rsds_expr_tab.
REFRESH lt_texpr.
wa_texpr-tablename = 'PA9004'.
wa_texpr-expr_tab[] = lt_rsds_expr_tab[].
MOVE-CORRESPONDING wa_texpr TO lt_texpr.
APPEND lt_texpr.
pnpdynse[] = lt_texpr[].
ENDIF.
English is the forum language.
Edited by: Rob Burbank on May 18, 2011 11:41 AM -
Adding new fields in Custom Infotype
Hi,
I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
& hiding the old tab.
Please let me know procedure for Adding new fields in Custom Infotype for displaying in new tab.
Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
Edited by: Sachin Thigale on Aug 23, 2010 7:05 PMPlease search. Lot of Threads on this.
Follow these steps.
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
The above details are from the following link
Re: How to add fields in custom infotype and update its screens -
Adding few new fields to Custom infotype already developed
Hi
I have a requirement to add new fields to already available custom infotype. I have to edit the PS structure and add few fields there and activate it. My question is, when I tick on "Generate Objects" after maintaining the PS structure, it will show pop up boxes asking whether to overwrite those objects already exists, shall I tick it or exit? Because the code is already written in the module pool for some validations,if I regenerate the objects, will the complete code will be erased?
Please guide me in this regard.
Thanks,
Pallavi.Hi,
Yes you need to regenerate objects, for changes to reflect.
Since the objects are regenrated, the custom validation codes should get overwritten.
To be on safe side, you can copy this infotype to a dummy infotype and regenerate the code and check. -
How to add new field to Screen Modifications
Hi,
I want to get P0002-CNAME in screen modifications of Infotype 02. At present i have other 23 fields for which i can set display attributes. This new field is to be added in infotype 02 and also some coding is to be put for this. How this can be achieved ?
One solution is to enhance infotype and add some Z field,but i would like to use the existing structure field.
Please let me know proper way for this.
Thanks.Hi,
I want to get P0002-CNAME in screen modifications of Infotype 02. At present i have other 23 fields for which i can set display attributes. This new field is to be added in infotype 02 and also some coding is to be put for this. How this can be achieved ?
One solution is to enhance infotype and add some Z field,but i would like to use the existing structure field.
Please let me know proper way for this.
Thanks. -
Im trying to add new fields to Advanced search in WHO's Who settings which are customs fields Z from infotype 1008; I customized new infoset copy from standard adding this infotype, but im getting error when i run de query on ESS, anyway Who's who don't Show fields from infotype 1008 on output field details, Anybody Knows How I can add custom fields in Who's who infoset and how the hell can I read infotype 1008 from infoset on PCH DataBase?
Thanks in advanceHi,
Here is the catch, when you add the custom infotype make sure it has the primary key same as other infotypes used in the Query.
For example make Pernr as the primary key in the custom infotype.
I tried the same in our landscape and it worked fine.
The steps I did are as below:
In SQ02 - EDIT - Change Info-Type Selection - Add the Custom Infotype to the Query
In SQ03 created a custom user group and assigned Infoset to the User Group.
In SQ01 create the query and click on Change - From the top selected Basic List and added the fields which I want to see in list and also the selection criteria.
Once done with this execute the Query and see if the data is populated from the Custom Infotype.
There is no coding needed to populate the data.
Make sure the join is right and it should get the data. And the above link shows how to include the Custom Info-type fields in WHO'S WHO search.
Hope this helps.
Cheers-
Pramod -
Enhanced field in Infotype into the iView - ESS
Dear All,
I am working in ESS and I have the following scenario. The screen "Family/Related Person" has to shown to the endusers, for this the standard iView is available (PZ12), but the infotype 0021 (Family Member/Dependents) has been enhanced to include additional field. Here the requirement is to include the customized field into the iView.
How can I proceed with this requirement, whether I should go for new webdynpro development or can I copy the program of standard iView into a z-progrm and include the field and necessary coding, if i go with second option is there is anywhere the dependencies will get affected while updating the Infotype 21.
Your valuable inputs on the same pls.
Thanks
GargamThanks Saurabh
I read the wiki page, its helpful and in my case I am not adding a custom field, but I want to show a field which is already present in infotype record...
Wiki says "If you do not need to add a new custom field to the front end, but just an already existing field of the Infotype record, you do not have to do anything at this point."
So it appears, if I change the structure and add a new field in iview that will be sufficient.Any toughts on this?
I am going to give it a try a see if that works.
Thanks -
How do you add additional fields in infotypes?i want to leave blank space
how do you add additional fields in infotypes?i want to leave blank space in front of the field?
Hi,
To add new fields go to PM01 and select Enhance Infotype option and then follow the steps in sequence.
I am not getting blank space in front of the field. please elaborate it.
Regards,
Raja.D -
Custom field in infotype: Cannot see in T588M
Hi ,
I created a new field in CI include of infotype 0008. I can see the field on infotype screen, but i cannot see the same in infotype screen control T588M. I have activated and adjusted the database (se14) after making changes . Please advice..
Thanks
Arun.Hi,
Solved it myself.. The problem was that I had not assigned screen group to the new fields in the module pool layout.
Thanks
Arun.
Maybe you are looking for
-
I ran into a glitch on my system that I tried to fix myself. My NOD32 was always showing the yellow warning circle as my protection status when I started my computer. I tried to fix this every way I new how. Then I started to get pop ups asking me to
-
HT4859 How to move songs back up to iCloud?
I have iTunes Match and had my entire music library stored in iCloud. Recently downloaded a few songs from iCloud music library back to my computer. Now I want to put them back up in iCloud. How do I do that? Because if I try to include any "downlo
-
What passcode does ios7 want? I don't have one set.
-
D7360 automatic duplex printing is not available with latest driver
d7360 automatic duplex printing is not available with latest driver This question was solved. View Solution.
-
Need N82 in E61i Format & minor enhancements
I have been enjoying the N82 with 8GB since over 8 months now. Over the days I found out that it would be nice to have a N Series phone that has all features in Mono Block (Candy bar format / Classic format) with a full QWERTY keyboard example E61i a