New field in the datasource
Hi all;
Im trying to add a new field to the 0CO_OM_OPA_6 datasource.
The new field is the Cost Center (KOSTL).
I just add this field to the Append Structure.
If I check it, the following message appears: Field KOSTL does not lie within customer namespace.
After the activation of the append structure, from the ICORDCSTA1, and remove the hide field from the datasource, I tested in RSA3 but the Cost Center columm appears empty.
Is there any step missing?
Can anyone help me?
Regards;
Ricardo
Hi
Whenever you enhance the data source,it is best practice to give name as zz*
and once you add these fields..system doesnot know how to fill these fields with data..so you have to write code to populate data into your fields..
go to se38(r/3 side) and give include 'zxrsau01' and click on change...
write code to fill your fields activate it and now check in rsa3...
Code sample
when '0CO_OM_OPA_6'
do this thing
Hope it helps
Thanks
Teja
Similar Messages
-
NEW fields in the hr cube 0pt_c01
Hi Experts,
I inserted a noew infoobject in the datafields of the ODS and try to create new update rule.
I got the problem " Data Fields was set to 'no update' "
for two Info objects (data fields) one already existing and another new Info object.
I try to change the Update type to Overwrite but I am not able to select the option Source Field.
i have added the new fields to the cube 0pt_c01,i have subtype,objectid, enddata, startdate, lockindicator, objectid, absence types, and keyfigures such as absence hours, absence days., payroll hours, payroll days, how do i create update rupes for the cube ,am struck in it . the fileds given are taken from customized datasource ZBW_HR2001PT(customized one)
How shall I handle this situation.........
any suggestions please
regards
Sherwin
Message was edited by:
sherwin paulI donot totally ustand your question though - <b>F4</b> on Source Keyfigure or Source Chars will give you the list of IO's available in the infosource.
So make sure you have them all in there unless you are planning to populate using Routines at UR level.
If you have enhanced the ODS then how abt adding the same to Transfer Rules, Comm strcuture..dint you do that ? -
How to add new fields to the system form (Ex.expenses to a/r invoice form)
hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQIf I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.
-
Error while adding a new field to the Segment in we31
Hi ,
I am getting error when i am trying to add the new field to the cust. segment.
It is released for the adding the new fields i am cancelling the release , but i got a message like this
Error while resetting release of segment 'segment name'.
it is comming from the message class EA and message number 259.
Thanks in advance.
Reagrds,
bharaniHi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay -
How to find out the user who has created a new field in the custom table.
How to find out the user details who has created a new field in the custom table.
Thanks,
JoanHi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani -
Fields in the datasource 0VENDOR_ATTR
Hi Gurus,
I need to unhide some fields in the datasource 0VENDOR_ATTR and then replicate it into BW. It is already loading the data into BW. Now I need some more fields to pass data into BW. Here my issue is my datasource is in display mode. I need to make it CHANGE mode so that I can unhide the fields. Is it not possible to unhide the fields when it is already with data.? Please suggest me.
Thanks in advance.Hey you can go ahead and unhide fields.Yes you have to do in change mode.
1) Save the datasource.Check if the fields which were unhide are getting populated in RSA3.
2) Replicate the datasource in BW/BI side.
3) Map the corresponding objects in transfer rules.
4) Activate the transfer rules.
5) Load data.
6) Activate master data.
0VENDOR being master data you should not have issues.
Hope this helps. -
How to insert a new field in the Report Designer
Hi all.
I have a query and a report, but the query evolve.
We have a new key figure (inside rows).
In the report designer, I check the data provider.
The new key figure is added in the catalog field.
Now, I would like to insert the new field in the report.
I add a new row in the report structure but it isnt what I want.
In this case, I add a second row inside an another keys figures block.
I want to create a new block for my new key figure
Thanks for your help
CélineYes, key figures is in the field catalog.
But When I do that " Insert a row ", Report designer create a " row 2 " below another key figures.
And it isn't what I want. I want a new block .
For exemple in the tab report structure (My new key figure is "Margin")
I do that
Group Level 1 : key figures
Detail Area
Sales Amount
row1
cell1
cell2
Cost
row1
cell1
cell2
row2 ( the new row added)
cell1
cell2
But I want that:
Group Level 1 : key figures
Detail Area
Sales Amount
row1
cell1
cell2
Cost
row1
cell1
cell2
Margin
row1
cell1
cell2
Thanks for your help -
How to add a new Field to the WEB User Interface in CRM 2007
Dear experts,
I have been struggling to add a new field to the (CRM 2007) user interface from available fields for a specific view.
I have maintained settings in BS__WD_CMPWBàRuntime Repository editoràComponentàViewàConfigurationàNew ConfigurationàAvailable FieldsàField Propertiesàand save.
But the field is only appearing in display mode in the Web UI, which doesnu2019t allows any user input.
I need your help to resolve the issue, I would be grateful if you could provide step-by-step documentation with screenshots or any other kind of documentation.
Each suggestion will be appreciated.
Best regards,
Raghu ram.Hi Raghu Ram,
I think you added a new custom field using some method like EEWB etc.,
Then, you are adding the field onto the UI using UI Configuration Tool .. right ?
These are the steps to diagnose:
Method 1.Check the field properties in the model browser first.
It should be showing 'C' i.e., CHANGEABLE. If it is showing as 'R', it is only READABLE.
In such a case you need to find a BADI to change the field properties.
For example, in Marketing Applications OBJ BADI has a method CHANGE FIELD PROPERTIES for this purpose.
Method 2. Debug and check what is the value coming for RV_DISABLED parameter in the GET_I method in BSP_WD_CMPWB. This should be FALSE.
Method 3. Check what are the field properties in the UI Configuration tool.
Make sure it is not a display only field.
Regards,
Masood Imrani S. -
How to Add a new fields in the selection screen of LDB.
Hi All,
I want to add a new fields in the selection screen of LDB & then i need to select the data for that fields.
So could you please tell me for that where i need to add the code for selecting the data.
Thanks
RoliHi
welcome to SDN forum
If you are designing your own LDB with your own tables you can define tree structure and then the selection screen for the tables
if you wants to modify the std LDB of SAp means take the access key and to modify that code
if you add the extra field you have to modify the where conditions in the code also
see the doc
A logical database is a special ABAP/4 program which combines the contents of certain database tables. You can link a logical database to an ABAP/4 report program as an attribute. The logical database then supplies the report program with a set of hierarchically structured table lines which can be taken from different database tables.
LDB offers an easy-to-use selection screens. You can modify the pre-generated selection screen to your needs. It offers check functions to check whether user input is complete, correct, and plausible. It offers reasonable data selections. It contains central authorization checks for data base accesses. Enhancements such as improved performance immediately apply to all report programs that use the logical database.
Less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
Mainly we used LDBs in HR Abap Programming.
Where all tables are highly inter related so LDBs can optimize the performance there.
Check this Document. All abt LDB's
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fabap%2fabap-code-samples%2fldb+browser.doc
GO THROUGH LINKS -
http://www.sap-basis-abap.com/saptab.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Re: **LDB**
www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_Logical_Database_FAQ.html
www.sap-img.com/abap/abap-interview-question.htm
www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9bb935c111d1829f0000e829fbfe/content.htm
Gothru the blog which provides info on LDB's:
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Sample code
TABLES: SPFLI,
SFLIGHT,
SBOOK,
SCARR.
START-OF-SELECTION.
GET SPFLI.
WRITE:/ SPFLI: , SPFLI-CARRID, SPFLI-CONNID,
SPFLI-AIRPFROM, SPFLI-AIRPTO.
GET SFLIGHT.
WRITE:/ SFLIGHT: , SFLIGHT-CARRID, SFLIGHT-CONNID, SFLIGHT-FLDATE.
GET SBOOK.
WRITE:/ SBOOK: , SBOOK-CARRID, SBOOK-CONNID,
SBOOK-FLDATE, SBOOK-BOOKID.
GET SFLIGHT LATE.
WRITE:/ GET SFLIGHT LATE: , SFLIGHT-FLDATE.
Regards
anji -
CProjects - Adding a new field to the detail screen of object link
Hi All,
I've a requirement of adding a new field to the detail screen of object link. But the field is a combination of 3 other standard fields.
Please let me know how could i realise this functionality?
Thanks in advance.Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D -
Adding a new field to the iView thru OADP
Hi All,
The customer has implemented the ECM for mySAP ERP 2005.
I have the following requirement for the current assignment:
1.I need to add a new field to the iView (webbdynpro).How can I do it using the OADP in IMG?
Pleae help.
thanx,
BhupeshHi,
Kindly check the following threads:
/message/1755908#1755908 [original link is broken]
/message/2496839#2496839 [original link is broken]
best regards,
Thangesh -
Adding a new field to the search help exit
Hi friends,
adding a new field to the search help exit. How does it work ?
Thanks in advace
IlhanThe search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
read table shlp-fielddescr into wa_shlp
with key tabname = 'M_PREMN'
fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
select orgeh endda
up to 1 rows
from pa0001
into (ld_orgeh,ld_endda)
where pernr eq record_tab-string+wa_shlp-offset(8)
u201Cpernr length is 8
order by endda descending.
endselect.
select single orgtx
from t527x
into ld_orgtxt
where orgeh eq ld_orgeh and
sprsl eq sy-langu and
( endda ge sy-datum and
begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop. -
Adding a new field to the Address Data for a business partner
Hi Experts,
I am trying to add a new custom field to the address data (all structures and tables) that is linked to a business partner on SAP CRM via EEWB. Structure is the address structure wthin BUS_EI_EXTERN. Table is BUT020. I have been told that it is not possible as there is no Business Object that allows this. When doing an EEWB, the only business object is BUPA, which when selected, adds the new custom field to BUT000. I would like the field to be added to BUT020 (Address Table). This leads me to believe that there is no standard way of doing this, which ultimatley means that it would need to be done manually. Please help me with this predicament.
Regards
YusufThe search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
read table shlp-fielddescr into wa_shlp
with key tabname = 'M_PREMN'
fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
select orgeh endda
up to 1 rows
from pa0001
into (ld_orgeh,ld_endda)
where pernr eq record_tab-string+wa_shlp-offset(8)
u201Cpernr length is 8
order by endda descending.
endselect.
select single orgtx
from t527x
into ld_orgtxt
where orgeh eq ld_orgeh and
sprsl eq sy-langu and
( endda ge sy-datum and
begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop. -
CRM IC Winclient - How to add new fields in the BP Search of TRX CIC0
Hello Experts,
I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
Can you help me?
Thanks in advance.
Caíque EscalerHi
make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
in spro in Define customer-specific search control -> mark fields with X.
and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
Regards
Radek -
How to add new fields to the DME file in F110
Hi,
We have a requirement add new fields to the file that is used in F110.
.I did go in to DMEE transaction but I hae no idea how to add new fileds to the existing file.
Can anybody please help me in resolving the issue.
Thanks
Venkat
Edited by: Venkat R on Jun 8, 2009 8:45 AMHi,
There is no function module for that, We have created our own function module and attached to that field.
Refer the below code. This will fetch the document number.
DATA: lwa_item TYPE dmee_paym_if_type,
l_fpayp TYPE fpayp,
l_fpayhx TYPE fpayhx,
first_flag TYPE c,
lv_lifnr TYPE lifnr,
voucher_id TYPE string,
voucher TYPE string,
invoice_id TYPE belnr_d,
voucher_len1 TYPE i,
voucher_len TYPE i.
TYPES:
BEGIN OF lt_regup,
xblnr TYPE xblnr1,
belnr TYPE belnr_d,
END OF lt_regup.
DATA: lt_regup TYPE STANDARD TABLE OF regup,
lv_regup TYPE regup.
Hope this helps.
Raja.A
Edited by: Raja.A on Feb 16, 2011 7:17 PM
Maybe you are looking for
-
I subscribe to premium and I can not open the adobe Revel in my ipad I oactualizarlo. I paid through September 2014 -.'s happening I can not use what I have already paid?
-
Number filter error emerged when updating OBIEE to 10.1.3.4
After updating OBIEE version to 10.1.3.4. one more bug-like situation was discovered. we have an a double column. in Admin tool it was designated as double. If shown in a report it is correctly shown as double number. but when i tried to make a filte
-
Hello to all, I am developing an application, using JSF, in which I have used applet to upload the directory. But I am not able to load that applet in the browser. My code is <jsp:plugin codebase="." code="DirUpload" height="100" jreversion="1.6
-
I have used one of the Dreaweaver CSS templates and would like to add a second header immediately below the first (and resize it to fit my needs later). Not being a pro in code, it seems to me that the simple solution should be to go into the the Spl
-
Allways the same e-mail address
hi guys wenn I startet the first time the LCD and I created a test form with a "submit" e-mail button with a test e-mail address. after the tests, I created a new real form with the same attributes like the test. just in the e-mail button I put the c