New fields created in MDM Console not visible on Portal iViews

Hi All
I would like to ask you. I recently encouraged very strange and annoying problem. We are developing Vendor repository. Menatime we have created some iViews and pages on the Portal. All of them are displayed from Main table. We can see all fields and added/deleted records.
However I can not add any new fields (from MDM Console main table) we have created. That is whired because I only can see all fields beeing in repository for long time now, but all new fields (from that same table) ar not visible on portal.
I tried few options with creating new and different iViews. No help. All the time I can vise old fields from repository but new one are not available.
Can you plase advice what is/ may be wrong?
Thank you in advance.
BR
Rafal

Hi All
After restarting server problem solved. That mean there is a casching problem. After investigation here is service to restart:
J2EE engine
Thank you for help.
BR
Rafal
Edited by: Rafal Paczynski on Sep 29, 2011 12:21 PM

Similar Messages

  • New folder created in Windows explorer not visible in Bridge.

    If I create a new folder in My Pictures
    folder using Windows Explorer, it doesn't show up in Bridge
    . I do it that way because selecting
    Get Photos from Camera doesn't allow me to select only the photos I want from the card. Why does Bridge not show all folders in My Pictures. I have Windows 7 Home Premium 64 bit. This message is formatting rather strangely.
    Thank you

    Libraries rely on a good bit of "magic" that has been added to Explorer.
    My advice:  Avoid them like the plague.  They do nothing you can't do by organizing your folders yourself, but they cause a host of problems.  I've disabled them in my system and in a year I haven't missed them one bit.  I'm all the happier for it.
    Windows 7 is a great system, but one of its weak points is [some parts of] Windows Explorer.  I think the same people programmed Explorer as made those awful commercials.
    -Noel

  • CRM Users Created on ABAP Stack not visible in Portal...........

    Hello All,
            I have WAS with ABAP + JAVA  [EP7], Hence using <b> dataSourceConfiguration_abap.xml</b>. as a datasource file in UME.
    As per my knowledge i cant create users from Portal hence I have created users in ABAP Stack but I am not able to view these users from Portal ?
    I have chaecked the entry in Configtool this file is maintained as Datasource.
    Please Guide me what may be the reson for this ??
    Is it possible to add Users from portal if Datasource is ABAP Stack ??
    Waiting for reply!
    Thanks,
    Smita.

    Hi Smita,
    Please go through these links:
    UME configured to use SAP ABAP
    For the configuration using config tool : http://help.sap.com/saphelp_nw04/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/frameset.htm for general remarks using this config and see http://help.sap.com/saphelp_nw04/helpdata/en/0f/bdd93f130f9115e10000000a155106/frameset.htm for changing the config.
    Check out the section "Read-Only and Read-Write Access to the ABAP User Management.
    This link would also be useful. This link talks about <b>User Management of Application Server ABAP as Data Source</b> :  http://help.sap.com/saphelp_nw2004s/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/frameset.htm
    Hope this helps.
    Regards,
    Sunil

  • Populating marketing attribute of bp in new field created by eew in crm

    Hi all,
        I have created new field in transaction types(lead opp, quotation and order) through eew.
        how do i populate a value of a marketing attribute that i have maintained for a business partner(TABLE for marketing attribute:- AUSP) in the new fields created in all the transaction types.
        Can anyone help me in how to achieve this as it is an high priority issue for me?
        I have tried doing by writing a code in pbo of the screen in which fields are created but it gives me a dump at item level if item is maintained otherwise it works but item is compulsary.
    Regards,
    Rahul

    Hi Rahul,
    Check the BADI 'CRM_CUSTOMER_H_BADI'
    Implement the method 'CRM_CUSTOMER_H_MERGE'
    First of all select the data from the table.
    Fill in the appropriate corresponding field in the structure 'CS_CUSTOMER_H_BADI',of the method, with the data extacted. Finally(very important), In the table 'IT_INPUT_FIELD_NAMES', of the method, append a line with the field FIELDNAME containing the name of the field in the Customer_h structure and field CHANGEABLE containing space.
    I think this should solve your problem.

  • One user from AD is not visible in portal user administration

    Hi,
    one of our users defined in Active Directory is unable to log into the portal. We have Kerberos authentication.
    I've checked this user is also not visible in portal user administration. The rest of the users are visible and are able to log in.
    Any ideas what could be the cause?
    Maybe some settings/attributes for this user on the Active Directory side could be the cause?
    Regards,
    Ladislav

    Hi,
       Could you please check and confirm if the user,group path are the same for the
    particular user on AD as that referred to by the portal. If not he would not be on the portal and
      then there would not be kerberos too in place for him.
    Rgds

  • SAP MDM Console not allowing to add new fields or load repository

    Hi all,
    We are in SAP MDM 7.1 SP06. I do have access to create table, fields, ports etc., And I also have access to load and unload repository.
    But when I login to SAP MDM Console and repository, options to load repository --> immediate and update indices are disabled. This is happening for Add/ Delete Table/Fields/Port etc.,
    However, if I login to repository using MDM console in another laptop or system using the same userid, I am able to perform all the operations mentioned above.
    Can you please help me with any suggestions to fix this. I do not want to reimage my laptop now inorder to fix this.
    I tried to uninstall and install mdm console again but in vain.
    Thanks,
    Rajesh

    Hi Rajesh,
    In the Main Menu you have a lock sign,click on that and unlock the view.
    This should solve the problem.
    Thanks,
    Ravi

  • Text not visible for the new fields created for Data Source Enhancement

    Hi .... I am working on Data Source Enhancements. I created few fields and append then to the Data SourceStructure . I also have populated the fields with data. The problem with a field is that I am not getting the text displayed in RSA3 ..Instead I am getting the field name itself.
    Example:
    FieldName       DataElement    Datatype  length  dec           Text
    ZZDOCTY                AUART         CHAR      4         0      Sales Document Type
    ZZNOODL                ZD_NODL     NUMC      1         0      Number of Deliveries
    In the above example the field ZZDOCTY is showing me the description in RSA3 i.e. Sales Document Type whereas the field ZZNOODL is not showing the text. Instead it is directly giving the fieldname ZZNOODL. Is it because of the fact that I created a Data Element for that field ??? and as I did not use the predefined data element as I did for ZZDOCTY???? Please reply me soon.....I need to display the text as "Number of Deliveries"  instead of ZZNOODL........I am working on 7.0.....

    May be the fields are hidden.
    Go to RSA6 select your data source and on the tool bar there will be a pencil butonto change. Click that and at the bottom, you will lots of check boxes.
    You go the field that you have enhanced and see whether the HIDE boxes are checked. If so, uncheck them, save and execute RSA3.
    Ravi Thothadri

  • While adding custom field in urgent change-Create new field button in AET is not coming

    Dear All,
    we have requirement to add some custom fields in urgent change document. while adding custom fields using AET, create new field button is not coming.
    Thanks in advance. points will be awarded.
    Rahul

    Hi Jignesh,
    Thanks for your valueble inputs, it really helped me to understand the process.
    I checked in Web UI configuration for urgent change document as you mentioned but still that button is not coming.
    In transaction BSP_WD_CMPWB, i have created enh. set: Z_ENHANCEMENT_SET.
    Can you tell what to selelect in application and page popup which comes after selecting Enhance component button. Actually i tried but i am not able to add new record in conf.
    Thanks in advance.

  • Extractor (2lis_11_vaitm) does not takes new field created with new domain

    Hi,
    I created a new data element and domain in ECC
    Source system ECC:
    1. I created a new Z data element and Z domain (char 60) in ECC.
    2. I created a new Zappend Strcuture and added a new field with the above data element to a extract structure of 2LIS_11_VAITM.
    3. In RSA6, I unchecked hide column and checked Field column.
    4. I wrote an ABAP code in CMOD to populate tis field.
    5. I can see the data in that field in RSA3 of this extractor.
    BI side:
    1. I replicated the datasource.
    2. I could see that field in the fields tab of the datasource. (NOTE: In the field tab, against the column u201Ctransferu201D that field value is unchecked.)
    3. When I check the PSA table, I donu2019t see this field.
    4. Plus I donu2019t see this field in the right hand side of the update rule also (3.5 flow) or in the transformation (7 flow).
    I unchecked the field column and activated the datasource in RSA6 and replicated it in BI. Then also the same problem.
    Is there anything that needs to be done for this Datasource so that I can get this field in the update rule and transformation.

    Hello.
    I was checking this issue, and all the enhancements with fields need to have a customer-exit to populate this fields,otherwise they will come BLANK.
    As those fields are not delivered by SAP and are not in the original datasource(RSA5) from Business content, this is related to customer's enhancements.We can only see these fields in the datasource enhanced by customer(RSA6).
    To have the proper values assigned to those field, you should write an User Exit program. This program must be created to fill the enhanced fields as they are not filled in the same way as the SAP delivered
    fields.More details about this process you can check note 576886.
    576886-Change to user-defined fields not extracted.
    This note is an example for some datasources regarding what need to be done.
    Thanks.
    Walter Oliveira.

  • Change the field details in MDM Console

    Hi All
    I have unloaded repository and try to change the fields details ,like changing the display fields option as yes or no. in MDM Console .
    But it is not allowing me to do so and giving error message as "field name already exists"
    But when I go and change the user defined field  it allows me to do so.
    Same is the case with Table details
    Can you guide me on this.
    Thanks
    Suds

    Hi Suds,
    If you are using the same and the latest MDM patch for both your original and the Test repository, it should behave in same way.
    But you mentioned that for test repository, you are not facing any problem.
    Try out these steps to debug your original repository:
    1. Check your original repository for any errors and also if found any, then repair it.
    2. Also try to archive your original repository and then unarchive it with a different name. ( And check whether it is still behaving the same).
    3. You can also try creating a duplicate repository and test it.
    4. Unload and Re-load (with updated Indices) your original rep and test it.
    I hope any of the above steps helps.
    *Please reward points if found useful.
    Thanks and Regards
    Nitin jain

  • New field in CRM datasouce is not replicated into BW datasource

    Hello Everyone
    I am hoping you will be able to help me. We have created a new field on our CRM Activities datasource CRM_SALES_ACT_1. This datasouce is currently active and we are using a delta update to our BW system. We have added a new custom field to this datasource which is being populated in CRM (I have checked this using RSA7). However, when this datasouce is being replicated in BW it is not bringing across the new field into the datasouce. We replicted the datasources when the delta queue had been cleared down.
    Please can anyone suggest what else I can try, Do I have to delete the current initialisations, and then recreate them using initialisation without datatransfer?
    We are using BW3.5
    Many thanks
    Gareth

    Hi Gareth,
    I am currenlt involved BI 7.o implementation for CRM analytics (CRM 2007). I am working on a UK council project. I am first time working with CRM.
    Mainly we have to provide reports on,
    service tickets,
    Activities,
    Survey
    ERMS etc..
    Can you please provide some design documentation if you have?. Please can you also let me what all masterdata required....
    Thanks,
    Sudha

  • XD01 fields Name 3 and Name4 not visible

    Hi,
    I have a requirement, in xd01, when i go to Address tab, by default sap shows only Name1 and Name2 fields, but Name3 and Name4 are visible only after clicking on the "More Fields" button, which will expand and Name3 and Name4 fields will then be shown.
    My requirement is to keep these fields open all time.
    Kindly let me know the solution.
    Thanks,
    A Sustainer

    Hi
    if you want name3 and name4 mandatory fields in XD01 means
    Path:
    Financial Accounting (New) --Accounts Receivable and Accounts Payable--Customer Accounts--     Master Data-- Preparations for Creating Customer Master Data --Define Account Groups with Screen Layout (Customers) --
    select that particular group and click GENERALDAT : -- ADDRESS  - put required entry for Name 3 and Name 4
    thanking you
    regards
    Mahesh

  • Added new field to cube but data not passed from DSO

    Hope someone can help.
    (BI 7.0) We added new fields into a cube. The fields already existed in the DSO. When we ran the process chain in development for the first time after making this change, we notice that the 'historical' data for these fields is populated in the cube. When we do this in our quality system only new data passed to the cube is updated. In development in the sub-chain DTP request we see all previous requests listed under selections. In quality it is only the latest request. The only difference is that the DeltaInit flag in the DTP request in development is ticked (extraction mode) - but not in quality. Does anyone know whyb this is?

    hi peter,
    Adding fields to cube doesn't affect delta status...The delta DTP should be able to handle delta requests automatically.
    I guess in you quality system, the cube already got all requests updated from ODS before you importing the change request. And in develop system none of the requests in ODS were updated before the change.
    Regards,
    Frank

  • Adding new field to data source -can not see them

    Experts,
    I have added 4 fields to the data source 0FI_AA_11 .
    I can able to see these fields in the append structure or in RSA2,but i can not able to see in RSA6.I reactivated append structure ,still i can not see these fields in RSA6.
    Please advice me how can i see them in RSA6.

    Hi Manoj,
       Have a look, similar post:
    Re: not able to see new fields in datasource
    Hope it Helps
    Srini

  • How to add new field to table control data not displayed

    hi
    I have added some nwe fields to already existing table control added three new fields...
    though the recoreds are inserted in teh table properly with the three new fields user id data and time fields
    but on display only the data is not shown in these three columns though the data is coming in internal table...but not to the screen output
    pls suggest where the problme may be
    nishant

    First try the small button Configuration on top right of the table control, as displayed when you run the program. Hit 'Administrator' and see if the fields are checked as invisible. Uncheck them, activate and save.
    If the fields are not in that list at all, then check if the table control is initialized for the screen you use. For example
    CONTROLS: tc_ent_lines TYPE TABLEVIEW USING SCREEN '0100'.
    but you copied your screen and use the same table control in the new screen 0200. Then all you have to do is
    REFRESH CONTROL 'TC_ENT_LINES' FROM SCREEN '0200'.
    before you show the screen.

Maybe you are looking for