New file per page break

Is there a way to have a Crystal Report export a seperate PDF or other format file per page break in the report?

Hi Bill,
According to my understanding you have a report running into multiple pages and you would like it to have exported on different PDFu2019s.
I have done a quick test and we cannot have a different PDF for each page break in the report. When we export a report that will export the whole report.
I hope this helps you.
Regards,
Prashant

Similar Messages

How do I change the default save location for new files in Pages back from iCloud to my Documents folder?

I just upgraded OSX to Mountain Lion and Pages to 4.2, and because OSX is syncing with my iCloud account, when I go to save a new file in Pages it defaults to try to save to my iCloud account rather than giving me the folder structure on my hard-drive that I prefer. It requires two extra steps to save to the proper place in my Documents folder on my hard drive.
Is there a way to reset the default so that when I go to save a new file, the folder structure opens to the last saved folder (like it does in other non-iCloud applications) rather than defaulting to my iCloud, and to do it without just removing documents from my iCloud account entirely?
I checked the Preferences for both Pages and iCloud and found nothing about this.

What I meant is turn off Documents and Data in iCloud in OS X. Keep it on on your iOS devices. iCloud will sync documents between the iOS devices and make them available on the iCloud web site, but it won't mess up iWorks' open and save dialog boxes. It also won't assume that you want all your documents in iCloud, which I think is undesirable anyway.
Keep iOS and OS X separate, and use the web site to move files between the two as necessary.
iOS iWork is different from OS X iWork. There are fewer fonts on an iOS device. iOS iWork programs have slightly different feature sets than OS X iWork programs, and the file formats are different. iCloud automatically converts the file format when necessary, but if you make a habit of saving things directly to iCloud, you are limited to the lowest common denominator between the two versions of iWorks. So why would anyone want iWork on the Mac to open and save documents on iCloud by default?
If you want to store files in the cloud and sync them on your Macs, SugarSync is a much better solution. It lets you choose your sync folders, it doesn't make you reorganize your files, it lets you sync all file types, it doesn't convert files to a different format and back, and it stores everything in the cloud, too. Just the simle act of saving a file backs it up and syncs it. I wouldn't live without it. iCloud is best with iTunes purchases and synchronizing Mac settings and iOS files; I woudln't live without it. The two make an unbeatable combination.

IDCS2 - Print/save seperate pdf files per page (with custom filenames)

Hi everyone,
I'm having this issue here. I've created a new document after data merging, this document has 50 pages, every page contains an amount, a code and an image. Now i need to have 50 seperate pdf files, so 1 pdf per page, from this with a file name that goes like this: "ammount_code.pdf"
Is this possible, if yes, can you explain like I was a 3-year-old kid please? :-)
Thanks in advance!!

I don't think there is any nice, automatic way to do this out of the box. It might be scriptable, though, since you could probably pull the amount code for each page that way, but you'd need to ask over in the scripting forum for the fastest response.
In the meantime, someone asked a similar question last week, and I pointed him to a paid plugin, and you can also export the document to PDF, then use Acrobat Pro to extract the pages to separate files, but at that point I think you'd need to manually rename them to get your codes as the filenames.
Peter

Renaming new files in pages for iCloud

When I create a new blank file in Pages for iCloud beta the file is named blank. There is no obvious way to rename it. If I close the document and then try to restart Pages for iCloud I get an error message stating that pages can't be loaded.
This seems fundamental so I presume it is addressed somewhere.

That is what I thought would be the way to do it. However it seemed the only way to see the file selector window was to close the file I was working on and and then hit the pages for iCloud icon again to get the file select window. However, pages refused to reload. I was left with checking the iCloud files on the Mac. I changed the file name there. It sees to me the online and iOS versions of the program should allow for naming of the file from within the files editing window just as can be done on the mac version.
Thanks for the follow up. I guess I just need to figure out why pages for iCloud wouldn't relaod. I suspect it needs to be closed first and that must involve more than closing a window. That begs the question of how the web based program is closed.

More than 1 audio file per page

Hello,
when creating my homepage, I also wanted to publish some audio files. Therefore I put for example two Caruso recordings on one page. But when it was published, only the first one showed the QuickTime-tools and could be played, the second one only showed a Q and could not be played. What can I do? Of course, one page for every recording is always possible...
Thank you very much for helping me and for excusing my rudimentary English!
Sincerely
Peter Weber

Can you provide a link to the page. It's difficult to tell without seeing it.
<http://web.mac.com/peter.weber/Peters_Homepage/Caruso.01.html>
Thank you for looking in!
Peter

How to split PDF file by pages

Is there any programming way to split PDF into pages, say one PDF file per page or specify page range to split PDF file?
Thanks for your help.

Yes it does. It disassembles pdf1 by extracting pages 1-3 and disassembles pdf2 by extracting pages 4-5. Then re-assembles the two subsets into a new PDF.
You could extract page1 from pdf1 only and create a pdf, then page2 of pdf1 into a different PDF using something similar to:
<?xml version="1.0" encoding="UTF-8"?>
<DDX xmlns="http://ns.adobe.com/DDX/1.0/">
<PDF result="Final.pdf">
     <PDF source="PDF1.pdf" pages="1"/>
</PDF>
<PDF result="Final2.pdf">
      <PDF source="PDF1.pdf" pages="2"/>
</PDF>
</DDX>
You can also use the PDFFromBookmarks tag to generate a new document for each level 1 bookmark created in a PDF.
<PDFsFromBookmarks prefix="stmt">
     <PDF source="doc1.pdf"/>
</PDFsFromBookmarks>
You can get more info at http://livedocs.adobe.com/livecycle/8.2/ddxRef/000640.html
Jasmin

Page breaks in PDF library

Hi,
How can i provide a page break using PDF library? Whether Indesign CS4 does support page breaks for PDF generation. If the not the API, whether this is possible by creating a Indesign template with page breaks for the data to fit in? Also whether Adobe PDF supports page breaks? Please shed some light into this.
Thanks,
Rithu

I Just checked through a few old documents. It appears that numbers used to export PDF files with page breaks and the last update scrapped this in favour of redicusously large one page files.
Is it really that hard to give an option as to how to export a file?

CSS Page-break-before is not working in FireFox 4 but worked proper in FF3.x

I have web app that produces ~10 page sales estimate. To make things look nice, I have added pagination to my CSS files (using page-break-before:always)... this all worked wonderfully in FireFox 3.x... I recently upgraded to FF4 and now it is not working

Hi there,
I seem to be having a similar problem, however, the first page break is working, but each page break after that is not.
The page break is a div that is a dedicated page break layer and the first clearly works, but the remainder of the 12 page report doesn't have any breaks.
Testing with other browsers shows up 12 pages with breaks which to me indicates a issue with ff4 as I have only recently upgraded to 7 and it used to print under ff3 with all the breaks no problems.

Maintaining manual page breaks when exporting to .doc OR .rtf

Hi, all.
I've tried to find solutions to this on this board, but am coming up short. Please help!
I have inserted page breaks into my pages document. When I export to .doc or .rtf, the page breaks are gone (the separate pages now just run into each other). Any ideas?

MVes,
I tried to duplicate your reported behavior.
I found that a Pages file with Page Breaks _exported to .rtf_ opens in TextEdit with NO breaks, opens in Pages with NO page breaks and opens in Word with page breaks as designed.
I found that a Pages file with Page Breaks _exported to Word_ opens in Pages with Page Breaks as designed, opens in TextEdit with page breaks as designed and in Word with page breaks as designed.
So it appears that the only problem is with opening an RTF doc in Pages or TextEdit. There have been other reports here that indicate that Pages support of RTF is weak on import.
Jerry

Automatic file path pages

How do I add a file path in a new file of Pages ?

In Pages '09:
Menu > File > Insert File Name
It sounds like you may have Pages 5 on Mac OSX 10.9 (Maverick).
Apple has removed over 90 features from Pages 5.
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5 and rate/review it in the App Store, then get back to work.
Peter

Prevent Occurence of list header and page breaks in spool file of ALV Grid

Prevent Occurence of list header and page breaks in spool file of ALV Grid Display.
When we run the ALV in background and create spool request then:
Spool file output is coming like this.
Column1 Column2 Column3 Column4
data        data        data       data
data        data        data       data
data        data        data       data
Column1 Column2 Column3 Column4
data        data        data       data
data        data        data       data
data        data        data       data
But the required is like this
Column1 Column2 Column3 Column4
data        data        data       data
data        data        data       data
data        data        data       data
data        data        data       data
data        data        data       data
data        data        data       data
Please suggest a posible answer

Hello all,
if you have not yet solved this on your own, here is my solution: use a format type that has 60000 lines per page for your spool output device.
It all depends on the format type that was used for creating the spool output.
By default (in our system), we have 65 lines per page. And after each page the column headings of the ALV will appear.
What i did:
create a new format type via transaction SPAD->full administration->device types->format types (copy an existing one)
change"Number of Rows" to 60000 or something applicable
edit the device type of your output device (e.g. LOCL) to contain the newly created format type (via SPAD; Button "Formats" in device type maintenance).
That's it! Be sure to use this format type for your output device in the "Background Print Parameters" window (-> Button "Properties").
Regards
Daniel Klein
All other parameters you discussed before didn't do it. All ALV-Settings will be overwritten by the output device settings and its print properties.

RE: How can I create a page break in a file?

Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

Tien,
Try myFile.WriteText('\x0c'); instead of myFile.WriteText('\f');
Regards
Richard Stobart
-----Original Message-----
From: Wang, Tien [SMTP:[email protected]]
Sent: Friday, September 12, 1997 6:09 PM
To: Glen A. Whitbeck
Cc: forte-users; owner-forte-users
Subject: RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

How can I create a page break in a file?

Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the following
two methods, but neither of them works. Specifically, it seems a special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);
-----------------------------------

Tien,
Try myFile.WriteText('\x0c'); instead of myFile.WriteText('\f');
Regards
Richard Stobart
-----Original Message-----
From: Wang, Tien [SMTP:[email protected]]
Sent: Friday, September 12, 1997 6:09 PM
To: Glen A. Whitbeck
Cc: forte-users; owner-forte-users
Subject: RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

In the new Pages 5.0, what is the page break shortcut key. I cannot find the key as indicated on the drop down menu.

in the new Pages 5.0, what is the page break shortcut key (it used to be the Fn + enter). I cannot find the (new) key as indicated on the drop down menu. Please help.

Hi Bruce and fruhulda,
ok, I found the keyboard viewer, it only shows the traditional symbol 'return'. something like a sideway u-turn continued with the arrow under. This is the Canadian or US keyboard.
btw thanks for your suggestion.

Some files in "DOCUMENTS" icon in dock won't open. Get msg saying You need a newer version of Pages to open this document." Have Pages 4.1 installed. Same files will open ok from Finder, Pages App. Recently sync'd with ipad2 (Pages) after iOS5 installed.

Some files in "DOCUMENTS" icon in dock won't open. Get msg saying "You need a newer version of Pages to open this document." Already have Pages 4.1 installed. Same files will open ok from Finder/Pages App./selected file. Prob not noted until recently after sync'd with ipad2 (Pages) when I installed iOS5. Anyone-- please?!

You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Rate/review Pages 5.2 in the App Store.
Peter

New file per page break

Similar Messages

Maybe you are looking for