New Filed in ME5A & ME2M

Hi
i want to add a new field in ME5A
i.e Number of Delayed Days
values inthat filed should be
Number of Delayed Days = PR Creation date - PO Creation date....
usage : User wants to know Number of Delayed Days for Generation PO......
I need a Ztode like ZME5A.....
How to do this ???
similer i have one more requirement
ME2M should copied to ZME2M
same i want add new filed Delayed days
Number of Delayed Days = PO Creation date - GR Created date...
Regards
Ramesh

Ramesh:
Could you please stop posting question and answered them yourself if you're not going to share the answers?
Sorry but it's getting kinda annoying...
Greetings,
Blag.

Similar Messages

How can I add a new filed to standart SAP Screen

Hi eveybody,
I am using ima11 t-code and I need to add A new screen field to standart SAP screen(program No SAPLAIA1 Screen:1001 ).I have found five user-exits(AAIR0001,AAIR0002A,AIR0003,AAIR0004,AAIR0006) but there is no screen-exit. How can I add a new filed to standart SAP Screen.Is it possible? If it is possible, how can I do that?

hi
yes you can add a search help for a filed on the screen
but you need to find out for the USER EXIT available for that T-CODE
because it is a standard T-CODE we can't add code directly to the standard T-code
1st we need to find out for a user exit and then add code in that user exit
reward if usefull

Create New Filed in Line Item Text Tab

Hi Experts,
How Can I create a new filed in Quotation > Line Item > Text Tab ?
Tks. & Brgds.
Ripon

Hi,
Hope your requirement is to add one u2018Text typeu2019 in the line item of the sales order. Say you want to add u2018ITEM DETAILS_SOURCEu2019 in the line item text of sales order. Follow the steps given below.
1.     SPRO >> SD >> Basic function >> Text Control. Click u2018Text Controlu2019
2.     Click on u2018Define Text Typeu2019
3.     Select u2018Sales Documentu2019 and then u2018Itemu2019
4.     Click on u2018Changeu2019; select the Text procedure u2018Sales itemu2019 and click on u2018Text IDu2019
5.     The text object is VBBP; Create a new u2018Text IDu2019; Go for a new entry and enter the sequence number (higher than the existing one); enter TEXT id as u2018ITEM DETAILS_SOURCEu2019; save
6.     Now the new text id will be displayed at item text if you create a sales document that includes inquiry, quotation and sales order.
Hope this will be useful to you.
Regards,
K Bharathi

New filed in Asset Report

Hi,
In asset register business want to see new filed/text information (i.e. Brand name of the asset). Please let me know how can we add a new file in Asset Master in AR01 or Asset History Sheet reports.
Please guide me.
Thanks
Partha

Hi,
I trying to use Brand description the following field & supposed to add this field in screen layout.
In asset Master (AS03) there filed "Supplementary text" ANLA_LETXT Length 50.
Please suggest me, its possible or right or wrong.
Thanks
Partha

New filed adding in BI (new enhancement)

Dear friends,
i got new requrement today i.e adding a new filed in crm side and BI side that is
CRM SIDE -
>
1.Enhance Data Source 0CRM_JMD_ACCT_H with the new field (LK description)
-     Append new field in the structure of data source of 0CRM_JMD_ACCT_H.
-     Adding routine in BADI to populate value for LK description.
You can follow the ABAP pattern how we get LKnumber. You can get description from field DESCRIPTION on structure LT_orderadm_h
BI side -
>
1.     Replicate datasource 0CRM_SRV_REQ_INCI_H
2.     Create new infoobject that represent LK description
3.     Add infoobject LK description on cube: A, DSO : B, C.
4.     Mapping related transformation with new field from 0CRM_SRV_REQ_INCI_H
5.     Add new infoobject KIV description on multiprovider ZMC_SRH1.
6.     Add LK description in related query via query designer.
My question is if want to get the new filed in above mentioned data source , once if we repllicate the datasource FROM CRM TO BI whther the field is also availble in that particular datasoruce in BI? so that i can start edit the availabe CUBES and DSO ? or else again i need to add that filed in datasorce? i measn in RSA6 ?
please confimr me the doubts and thank you.
regards
anand

Hi....
Please check the below link, it will help you to understand the use of BWA1 :
Re: Need some info regarding BWA1 transaction in CRM
Also check :
http://www.sapfans.com/forums/viewtopic.php?f=16&t=142812
Regards,
Debjani..

New filed for F4 hit list for IB component - PCUI

Hi All,
I have a requirement,
A new filed "street" has to be added for the F4 hit list when searched on I Base component.
The BSP application is CRM_BSP_FRAME
Application     COMM_IBASE_M_F4
Appl.Set             COMM_IBASE
Structure Name       CRMT_BSP_IBASE_CS_F4
Field Group         IBA_TREE_NF_F4
Structure Name CRMT_BSP_IBASE_TREE_NF
I have added the field in CRMT_BSP_IBASE_TREE_NF and then to the field group IBA_TREE_NF_F4. Created a new field label name too.
When I execute the application, the field data is blank.
Can you please let me know how to fetch data and assign it to the field. I am new to CRM. Please explain in details
Thank you in advance
Sree

Hi
I have solved it.
Thanks
Edited by: Sree on May 5, 2010 8:23 AM

How to add a new filed of Personnel number in FB60 data entry screen

Hello SAP Gurus,
We want to have a field to populate the Personnel number in all of the posting document entries via FB60. Besides the existing fields such as the "Doc.header text", "reference", "short text", "text" and "assignment" fields etc, are there any other fields that can be used to enter the Personnel number in the document entries? Maybe there're some fields are ready but the fields have been hidden on the data entry screen currently?
Personnel number is there in the Vendor master data in CoCd data, Accounting Info.
I checked the Field status group of the Vendor Recon A/c in OBC4 and made the personnel number as Optional from suppressed mode in FSG BS41 under Additional Account Assignment.
After doing the above, I am still not able to see the personnel number filed in FB60.
Am I missing anything else due to which I am not able to get the additional filed of personnel number in FB60 screen.
Any help would be greatly appreciated.

Hello Dear
Look FB60 screen has two parts :
The one in which you enter information related to vendor is Header Level, in this case you already assign Personnel No. in Vendor Master so no field is required as Personnel no. will be picked up from Vendor Master level.
The Other is line item level is bottom half part, if you want to assign personnel no. at Expense G/L level then if you scroll right you will find a field for Personnel no. If you can't see the field check your setting at OBVV for the field status group you assign to particular Expense G/L.
Hope you Understood
Cheers
IMK

TD Shipment ouput - New filed in condition table

Hello,
We are using TD Shipment functionality. We have an output type defined under "Bulk transportation scheduling". FOr this output currently we have an access sequence which has only one table with key field as "Transportation Planning Point".
Now we need to add another table to this at higher level with key combination of "Transportation Planning Point and Issuing Plant (PSWRK). But after adding this table to the sequence we are not able to use it, as we are facing following problems:
1. Initially the field assignment was not happening so wehave defined PSWRK in the structure KOMBOI. Now the assignment is happening.
2. But when we update the shipment, the output does not get triggered. The output analysis shows that access is not made. The system is not able to fetch the value for PSWRK.
-Is it because the ouput is at header level and we have used a field that is defined at item level?
- How can we use the item level field for this output? Do we need to define it anywhere else to be picked up?
Any pointers are appreciated.
Best Regards,
Amit

Hello AMit,
If you want to use a new field for the setup of a condition table, it
has also to be defined in the structure KOMKBV7 (included in KOMB)..
In addition, you will need to make use of user exits to populate these
fields in the communication structures.
In routine LVCOMFZ1 the following User-Exits are available:
- USEREXIT_KOMPBV7_FILL (Shimpent fields for Header and Stage)
- USEREXIT_KOMPBV7_PARTNER (Shipment fields for Partner)
good luck
david

Adding a new filed to 'allowed fields' for a movement type

Dear All
Can I add a new field to the allowed fields for a movement type at the SPRO node 'field selection for movement type'
Thanks

Post Author: V361
CA Forum: General
Could you be reporting from a View instead of a table ?

How to create new filed in vendor master

Dear Guru's,
Our client wants to see all related group vendros, when he post the invoice, now i want to create new field for related group in vendor master, is it possible to create, please tell the process
thanks in advance.
gopi.

Hi Friends,
Can anyone help me with Vendor Master creation creation XK01? On create vendor: control screen , when I enter the Customer which I created it gives an error stating Customer 27 is not currently referenced and will be updated accordingly. Can anyone suggest a solution? And do I have any option to assign more than one customer to the vendor I am creating.

Add new filed EXNUM in FBL5N Layout

Hi Frnds,
I want add new field in T-Code FBL5N layout, the field is Excise number from table J_1IExchdr, can anybody tell me how to do that ?
dont worry about points.
Thanks in advance.
mahesh.

Hi Mahesh,
Dont know the version on which you are working. If it is ECC 6 then this might help.
You can go to the report program for the transaction i.e to RFITEMAR and go to enhance mode and select show implicit enhancemnet options.
Then create an implementation for any suitable implicit enhancement option and select the required data and add it to the output table which i believe is 'it_pos' .
Regards,
Vikas
<b>Encourage by rewarding points if useful.</b>

PC-UI : Creating new Filed Group and link it to the screen

I have extended the Leads application in EEWB in CRM 4.0. I would like to bring the new fields in PCUI. How do I create a new field group containing the newly created fields, link it to the screen structure and generate the corresponding layout. Do I have to use CRMC_BLUPRINT transaction code at any point of time. An answer for a detailed approach would be rewarded with Maximum Points.
Thanks!
Suresh.

as it is custom fields use the tx:CRMC_BLUPRINT_C.
BTY when you add new fields via EEWB it will automatically generates fieldgroup and shows in the screen.
If you want to create your own fieldgroup goto above tx and you will find field group under application element.
Raj

IDOC - add new field in in existing segment definition

Hi,
For segement type say Z1MARA1 if we need to add a new field in segement definition say Z2MARA1 SAP is not allowing to add new field if we tried to cancelled the realsed 30E it not allowing since the SAP realease which we are working is 640 so only we can create new segement defination with version Z2MARA1001 with new field added but issues is that the partner Profile for outbound parameters the Segment release in IDOc Type is 31I so if we change this segment release in IDOC type to new version ie., 640 then it will pick all the new segement associated with it due to which the the format in which we pass the segements to third party will change so is there any way to use the existing segment definition which is release 30E & add addition field to it. Only one way I found is that when i try to cancel the released message is trigger so in the debug if I make it success it allows to add new field in existing segment definition but which is wrong way of doing is there any way we can used same segment definition & add new field without adding new version & new released.
Thanks in advance.
Rajeev

Varma,
I know that we can add new segement with new version my question is existing segement definition can we add a new filed because in partner profile we specified release 31i so even we create new segement type then version will be 640 so it will not pick the latest version.
Thanks
Rajeev

Modify New VO but not able to see Attribute Value.

Hi ,
I am facing one problems during my VO extend. I have done below step,
1) Created new XXCustomVO based on exsiting CustomVO.Created new Attribute, modify SQL and mapped and gave new Name XXCustomInfoVO.
2) Assign this new XXCustomVO to new filed with Attribute name.
4) Copy XXCustomVO.xml and all class file from Desktop to Server in respecitve folder.
5) Import Page regions which i have created New Item.
6) Import with JPXImport.("Porject substitutions" )
7) Now I run the page no errors found but not able to see new attribute Data.
Then I checked "About Page" but everything is refected correctly only not able to see new attribute data.
Can you please help me out. Is there any wrong thing i am doing or something is missing still.
Thanks

Hi ,
Even exsiting attribute value alos not display. I mean I have 20 attribute in this exsiting VO and I have add one more XX attribute and same as XXVO but non of value is display out of 21 attibute.
Even i have hard coded "1234" for this attribute but always return null.
Where I have to foucs.
thanks
Raj
Message was edited by:
RajPatel

How to add a new field in the cube and load data

Hi,
The requirement is
We have ZLOGISTICS cube , the data souce of this filed has REFDCONR-reference dcument number filed . We have to create a new field in cube load data and get this new filed into the report also.
Please any one can help me with the step by step process of how to do?
How to get the data into BW and into the report.

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

New Filed in ME5A & ME2M

Similar Messages

Maybe you are looking for