New firmware auto loaded on my Telstra TG587n V3 (Coral 15.1)

 
TELSTRA
WHAT ARE YOU DOING, completely shagged my modem setup with your new software load which by the way I did not want!!
Please tell me why most of the telnet commands have dissapeared, I need to make changes back to get some things working again but the commands are not recognised now!!!
VERY Bloody Annoyed.
 

Hi Brodie,
My biggest issues are:
- all my settings were lost.
- I can no longer telnet to my router. Either telnet service is no longer running or my network is blocked (10.0.0.0/24)
- I can no longer restore or backup my settings. These features seemed to have disappeared
- The fact that someone else can do this to a modem inside my house is very disconcerting. I am convinced I never gave Telstra permission to change my modem as and when they see fit.
What I would like to see is the restoration of full admin services to my router even if I decide to change the network IP range from the 10.0.0.0/24 range. I suspect that the authorised network range have been blocked in the ini file.
Christiaan

Similar Messages

  • Stop auto load of account information on Skype new...

    How do I stop my info from auto loading on a skype reinstall[ New ]
    Options 
    2 minutes ago
    I am selling my laptop -
    I have installed Skype and installed it fresh.
    Unfortunately every time I go thru the process, the re-installed Skype also includes my account and all my contacts.  
    How in the heck can I stop this from happening??????
    HELP!!!

    http://community.skype.com/t5/Subscriptions/How-do-I-stop-my-info-from-auto-loading-on-a-skype-reins...

  • Aironet client utility load new firmware 59% Error Writting to Flash Memory

    always receive this error
    Error Writting to Flash Memory in 59%
    Thursday August 07 2008 17:34:30
    Start test
    `The radio's registry keys are OK.
    C:\WINDOWS\system32\drivers\PCX504.SYS File Size: 124416
    The radio driver has been installed.
    TEST 2:
    The second step is to check the radio insertion.
    The radio has been inserted.
    TEST 3:
    The third step is to check if the radio is turned on.
    Your radio is turned on.
    Current Active Profile Name: Unknown Vendor
    Auto Profile Selection is not enabled.
    TEST 4:
    The fourth step is to check your client adapter's association to an access point.
    ---------->Association Status: No receive packets
    Checking driver/firmware capabilities
    PROBLEM: Firmware version is too old.
    POSSIBLE REPAIR: Download new firmware to the radio
    or replace the radio.
    any help :(

    please any help?

  • 46TL868 problems (new Firmware?)

    Hi,
    i have several problems with my 46TL868 and wanted to install a new firmware because the Toshiba support said it would solve the problems.
    Problem is i can't find a place to download said firmware and i won't pay a lot of money just for someone to plug in a usb stick.
    Perhaps someone knows where i could find the latest firmware for my 46TL868 television, or could provide it for me? I would be very thankful.

    Well, that was a dirty auto update. At some point, you might try doing the clean manual update and see as posted. If your not experiencing any problems with the older then keep what is loaded for now. At some point update so you can take advantage of the security updates with in the new version. 

  • How do I stop last web pages from auto loading in Safari?

    I find the feature of Lion that auto-loads previous web pages (and previous open applications) annoying. I want to stop this function. I see the checked box that asks if I want to re-open applications when logging out but I want the default to be to NOT re-open the apps. I equally dislike the auto-opening of previous web pages in Safari. I know that I can clear my history but what I want is for my homepage to open when I run Safari and not the last page viewed. Any solutions?
    Found this for Safari in the forums...
    Go to terminal and type in the following:
    defaults write com.apple.Safari ApplePersistenceIgnoreState YES
    If you decide that you rather have the new resume behavior, execute the above commands but change YES to NO.
    You can also do the same for Preview:
    defaults write com.apple.Preview ApplePersistenceIgnoreState YES

    iDrifter: The full command is:
    defaults write com.apple.Preview ApplePersistenceIgnoreState YES
    I was having the same problem and this is what I did:
    1) Closed Safari
    2) Changed the setting (mentioned) above in System Preferences
    3) Enter the "defaults write ..." command into Terminal.
    Now whever I launch Safari it does not load any pages.
    HTH,
    RJ

  • Officejet Pro 8600 N911g new firmware will not install.

    My printer: Officejet Pro 8600 N911g
    Current Firmware: CLP1CN1416AR
    My problem: Downloaded the latest firmware update (Version CLP1CN1322CR). When I go to install it, my printer shows as listed, but in the STATUS cloumn, it is listed as "Not applicable".
    I turned my printer on/off.
    I tried updating via network, and when it checks for an update, it states there are no updates avaiable.
    I tried updating via USB.
    I tried updating via the LCD panel on the printer, and when it checks for an update, it states there are no updates avaiable.
    Is there something wrong as to why this current firmware will not install?
    Thanks for any help.

    New Firmware (CLP1CN1416R) was installed automatically (Printer was set for "Auto Update").  Prior to new firmware install,  printer has performed flawlessly...no problems.  Immediately after printer updated it's firmware automatically I began to have multiple problems. 
    First, it kept asking me to perform an "Alignment" which I dutifully performed only to have message come back that 'Alignment Failed".  Printed sheet looked fine, and printer printed fine but now before any page will print the "Alignment Recommended" message comes up which I have to then override (Click 'Do Not Align' button at bottome of 'Alignment Recommended' message box.  This is getting really OLD!!  Simply unacceptable for a business class printer!! 
    Also, the printer randomly has started giving other messages such as "There is a problem with the printer or ink system" AND "Cartridges are Missing" ("when I've just recently put in new catridges and levels are OK!!) AND "Paper Jam" (when there is no jam!!) 
    None of these problems have occurred prior to the automatic firmware update.  I believe the reason HP hasn't posted the new firmware update to their Customer Service website is that they know there are bugs in it and don't want to compound the problems the new version has already created.  I seriously question why an automatic updating of firmware was done with equipment set to "Auto Update" and yet that same new firmware is not available to those who might have had their printers set for "Manual Update". 
    HP Customer Service - You need to issue a statement from the company as to what has happened with this firmware update.  If there are problems, take responsibility for it and make it right.  HP knows who it sent out auto updates to.  These printer owners should be immediately notified and the situation made right.  It is not real assuring to have your front line staff not know why the new firmware is not on the website.  I do not like the idea of having to pay for a Support Call when the problems with my out of warranty printer are directly tied to the Auto Updating of said printer with apparently defective firmware.
    I'd really appreciate a response back from someone in HP Customer Service.

  • New firmware update doen't allow me to see all files in iPod library...

    I have a 5G/ 60GB iPod, updated to the new firmware, and I have found that now there is no way to see a "Library" style depiction of all the files on my iPod, ala the iTunes "Library" category. I have podcasts that I manage manually which do not display as "Podcasts", and the easiest way to add and delete them (sometimes I duplicate them by mistake when adding from my other computer at work)was from the "Library" style view when the iPod device name was selected. Now those podcasts do not appear in the "Music", "Movies", "TV Shows", or "Audiobooks" categories. I CAN view them by date in the "Recently Added" playlist, but duplicates cannot be deleted from this playlist. I there a "View all Files" sort of option I am unaware of, or any other solution (3rd Party) to access/ edit/ remove these files?
    5G/ 60GB   Windows XP Pro   2.1
    5G/ 60GB   Windows XP Pro   Firmware 2.1

    The checking and unchecking of songs is done in iTunes, not on the shuffle.  And that may affect what is loaded in the shuffle during automatic syncing.  So first check what is actually loaded on the shuffle.
    If the iTunes sidebar (along left side of window) is not visible, from the iTunes menu bar, under View, select Show Sidebar.
    In the sidebar, find your shuffle under DEVICES.  Click the small trianle to the left of the shuffle name to drop down its content list (indented below the shuffle).  Click on Music there.  The list of songs currently on the shuffle is shown to the right.  Are the songs that do not play on that list, or not on that list?

  • New Problem - video loads, plays a bit, pauses, then plays without sound.

    On the first time that I used the TV-Out feature of the iPod, videos that normally were playing properly started to lag. The video would play about 15 seconds, then stop playing for a few seconds, then start again, but without sound. I just thought it might be because of the TV-Out feature, but after that incident, a large amount of my videos have been doing this, without using the TV-Out.
    My first use of the tv-out feature was around the time that I first updated the iPod firmware. I now realise that I have no need of the updated firmware, so would be willing to restore the iPod to factory settings, but would rather get some opinions first.
    Although these videos had played normally before, now they (and most all videos I have added since), do this when playing:
    Load up normally, play normally for about 15 seconds, pause and do nothing, then continue playing but without sound. If I use the clickwheel to skip ahead after it pauses, it will play normally for another 5 seconds or so and then pause and cut the sound again.
    I had not experienced anything like this before that first time I used the TV-out capability. Nor had I experienced it before updating the iPod. Now, many, but not all of my videos are doing this.
    Oh, it seems only the videos longer than 10 minutes are doing this... all the others work... some more testing would be needed to be certain. Video podcasts are playing fine. So... anyone else had this happen?

    This problem seems to occur for the 60GB models that are using the new firmware 1.1. It has been posted all over google and the only fix to this problem is to downgrade to 1.0. The problem is reported as not to affect the 30GB models but there are a few videos on my ipod (30GB) that suffer from this as well. I haven't downgraded by 30GB one to check if it fixes it, but I can assure you that it will fix the problem for the 60GB one (I used to have that one before).

  • N80 new firmware release date and wishlist

    It has been no update on firmware since the latest release V.5.0719.0.2 for N80 since 24 May 2007. With so many models rolling out and firmware revision released for other new and old models, one might wonder if N80 is being forgotten and the firmware revision is put on-hold forever in cold storage?!
    There has been so much discussion on the expectation for last firmware release but what we get is only product stability without signficant boost of functionality and performance. I believe this has made many proud owner of N80 phone waiting with a long neck.
    After reading through the forum, I have summarised some of the common expectation on the next release (hopefully) in a wishlist below. All is welcome to provide input on the improvement they expect in next firmware release. It is also hope that any status of firmware upgrade for N80 news to be shared here.
    The N80 new firmware wishlist
    i) AD2P bluetooth profile support
    ii) Nokia Maps application support (currently, N80 is not support model for Nokia Maps application)
    iii)Enhanced digital music player (similar with N73 ME with album art browsing)
    iv) Music file IDD tag editing (change artist, song title, genre information)
    v) Video ringtone
    vi) Skype VOIP support
    vii)Mymobilesite.net intergration for seamless moblogging interface
    viii)Auto birthday reminder storing from Contact entry
    Thats all I can think of for now.
    was: 3310--> N80 v5.0719.0.2--> N82 v31.0.016; now: 5800xm v40
    KeN82Ny

    Hi Jacob,
    Thanks for your quick response but if you go to the download section of Nokia Maps, N80 is not listed for selection on Nokia Maps setup file download. It is obvious that the compability page does show N80 is supported but which setup version to choose? I myself have Nokia Maps installed previously. But I believe there are new feature and interface in the latest version of Nokia Maps.
    Yes, mymobilesite.net is available for N80, but perhaps the new firmware can include it in the new firmware release to save other the hassle to install
    something to add:
    ix) HSDPA mobile internet surfing speed (3.5G?)
    was: 3310--> N80 v5.0719.0.2--> N82 v31.0.016; now: 5800xm v40
    KeN82Ny

  • New Firmware for Zen. Where is

    I remember during Christmas Break, when I first got my Zen (8gig, now upgraded to 6), I saw new firmware updates every week. Its been nearly 4 months without a firmware update. I liked the new features they kept adding, but stopping suddenly at only copying items in my SD card to my Zen and seeing ONLY my photos is NOT the best Creative can do. I love my Zen, but surely, someone in Creative's team can fix something about the Zen freezing (you know, fixed by using the paperclip reset ) or add more SD card functionality

    "...any update would probably affect millions of Zen users..."
    Not if they chose not to install it.
    Re the integrated SD question. I don't know if it's deception, per se, but it kinda felt that way to me too. I don't think its an unreasonable expection that that you would be able to access the stuff on the card through the regular menu (music, etc.). I've seen a variety of players with expandable storage and Creative's is the only one I've seen that keeps the card memory separate. It's just different, and not what many people expect.
    Another thing that is different and unexpected about this player is the faulty "resume" functionality. Oh, it will remember where you left off all right, and start there the next time you turn on the player, as long as the next time isn't more than 2 hours later. Overdri've media includes the Zen on its list of compatible players (one of the reasons I bought it), but it's only compatible in the sense that it will play the DRM WAV files. This flaw in the resume function and the fact that a bookmark loads only the single file containing the bookmark, i.e., it doesn't remember that the file you bookmarked is part of a playlist, makes it a frustrating experience.
    I know most people use the player for music, but the audiobook & podcast world has been getting more popular for the last several years, and it would seem like Creative would want to to take those uses -- and users -- into consideration when designing firmware for their products. I haven't decided yet whether I'm going to return Zen in favor of the **other mp3**, but I certainly won't recommend it to anyone if they plan to use it for anything other than music.

  • Airport Express is shutting off when running newer firmwares including the latest 7.6.1

    Hi All,
    My Airport Express has started shutting off in the past month or so after upgrading to the newer firmwares 7.6 & 7.6.1
    When the Airport Express shuts off, the status light goes dark and the only way to reset it is to unplug it, wait a few seconds and then plug it back in.
    After I plug the unit back in, it works for maybe 15 to 20 minutes and shuts off again.
    I googled the problem and I have noticed that others are having similar problem. Some people say that the hardware is failing or has failed. Others have mentioned resetting the unit to defaults and or downgrading the firmware.
    So I reset my unit to factory, but it didnt seem to help and the unit still kept turning off.
    Next I tried downgrading the firmware.
    I tried looking for a way to downgrade using the new Airport Utility on my Mac thats running Lion. However i could not find such and option. So i found the older version (AirPort Utility 5.6) on Apples website that would allow me to do the fimware downgrade.
    After installing the older version I managed to find the firmware downgrade function in Manual Setup. I downgraded the firmware to Version 7.3 (the oldest one I could choose). Once the unit has flashed itself it rebooted and came up in the Airport Utility. However It wouldnt allow me to configure the airport. The configuration options wouldnt load at all. This was fixed by resetting the unit to default. After it came back up I managed to set it up to how I had it before.
    And since then its been running problem free without any hiccups for the past two days!!
    My question is, has anyone seen this before? What could this be? Did Apple release the wrong firmware for my Airport Express Hardware? Did my Airport Express Flash the newer firmware imporperly? Were the settings from the old firmware incompatible with the newer firmware? Is the newer firmware causing the Aiport Express to oveheat or run out of spec? Or does Apple simply not put much effort into testing the firmware updates that it releases?
    It would be nice if the Airport Express would flash a colored light instead of shutting down completely if something firmware/software related is causing the unit to crash or overheat.
    I would like to know if anyone else has dealt with this problem.

    Two likely possibilities:
    1) An internal electronic component is on the verge of failure. It works until it gets hot, at which point it changes value and causes a shut down of the device.
    2) An internal connector is right on the verge of losing contact. When the device heats up, heat expansion causes a loss of physical contact.
    I assume that the Express is out of warranty. It is a real longshot, but you might try to carefully saw open the AirPort Express along the center seam to split the case in half to expose the internal electronics. There might be something obvious.....but unfortunately, more likely not.
    Chances are, you will need to replace the device.

  • Any new firmware for RG54GS?

    I bought Wireless Gateway RG54GS, but it constantly hangs up. It starts to work very slow and i cant access Configuration Utility on 192.168.1.254(just before it hangs up completely it starts to load pages in conf. Utility, but not full – only half of the menu or half of the right page, where the settings are...). When I restart it with a button on back, it works ok for some time and then it starts to hang again.
    Is there maybe a new firmware?
    Can router be automatically reset or something.
    What can I do?

    miros: make sure your computer network connection is set to DHCP.
    The RG54GS functions as a DHCP server and sends configuration information to the network connection on your computer. This sets the local IP address of the computer and the local network address. Control Panel -> network. I can't get more detailed without knowing your OS version.
    Check the network status. The Tcp/IP setup should be dhcp and the host IP 192.168.1.1 (last 1 could be something different).
    If you have a CMD shell the command "ipconfig" should show
    C:> ipconfig
      host addr 192.168.1.1
      sub net mask 255.255.255.0
      default gateway 192.168.1.254
    again the .1 on the host addr might be something different.
    If it does not show this then the network connection on the computer is not talking to the RG54GS. Again make sure the network config is set to DHCP.
    You could also try "ping"
    C:> ping 192.168.1.254
    to see if the network routing layer is functioning.
    IE address
    http://192.168.1.254
    Zinda: I have not seen an external antenna connection on my box. I might not be looking hard enough. I did not see it listed as a feature either.
    still can't get my PPPOE connection to work

  • MupdfPage: an add-on for mupdf for auto-loading/saving page numbers

    I love MuPDF, but it doesn't store page number before you exit as other viewers do. I wrote a new header 'pdfpage.h' under the 'apps' directory and hacked 'pdfapps.c' a bit so that now it auto-saves and loads page numbers. The hack is based on a svn version, which keeps changing and makes patching hard, so I put my hacks in the README.txt.
    The source can be retrived here: https://github.com/kaikaizi/mupdfPage/
    To use, clone latest source:
    git clone git://git.ghostscript.com/mupdf.git
    drop 'pdfpage.h' into apps directory, and apply the 4 changes in 'pdfapps.c'.

    Check out llpp and zathura. The former uses mupdf to render PDFs, the latter can (with a plugin). Both are very fast (llpp just FLIES), and have that auto-loading/saving page numbers. And, zathura has genious keybindings.
    But cool project. Thanks.

  • NEW Firmware Version 6.01

    All,
    We are releasing version 6.01 firmware for the F5, and F55 motion picture cameras. Thank you for your feedback in discovering the S/Q, Center Scan issue.
    When S&Q setting was set “On” in 2K Center Scan mode or 2K Full Scan mode and the power was turned Off and On, Recording did not work. This update fixes it.
    This update includes all other features and functionality as posted in the previous version 6.0 announcement
    http://www.community.sony.com/t5/F5-F55/NEW-Version-6-Firmware-F5-and-F55/m-p/506807#M28137
    PMW-F55/F5 Firmware Version V6.01 Release note
    June 30th, 2015
    This document explains about firmware update of PMW-F55 V6.01 from PMW-F55/F5 V6.00. The latest firmware version of related products is below.
    Product name
    Latest firmware
    Release date
    PMW-F55
    V6.01
    This announcement
    PMW-F5
    V6.01
    This announcement
    AXS-R5
    V4.1
    Aug 8th, 2014
    AXS-512S24
    V1.2
    June 5th, 2013
    AXS-A512S24/A1TS24
    V1.0
    Mar 17th, 2014
    AXS-A256S24
    V2.0
    Mar 26th, 2015
    AXS Utility Software
    V1.3
    Feb 28th, 2014
    RAW Viewer
    V2.2
    Feb, 28th, 2014
    This firmware can be updated from V6.00, V5.11, V5.10, V5.0, V4.12, V4.11, V4.1, V4.0, V3.0, V2.11, V2.1 and V2.0. When you want to update F55 and F5 from V1.22 and earlier, you must update to V2.0 first. https://community.sony.com/t5/F5-F55/NEW-Firmware-release-Version-2-0/m-p/195623#M6582
    Regarding the procedure and functions about V2.0, please refer to “PMW-F55/F5 Firmware Version V2.0 Release note” which was released on Oct 4th, 2013. And F55 and F5 must not be downgraded to previous versions after updating to V2.11. We couldn’t guarantee any troubles after downgrading. An “All File” generated by a previous firmware version can be loaded to V6.01 of F55 and F5.  
    NOTE:
    The new Firmware V6.01 for PMW-F55/F5 is only compatible with AXS-R5 running with Firmware V4.1. If your AXS-R5 has installed an older version, please update to the current Firmware V4.1 the same time. https://community.sony.com/t5/F5-F55/NEW-F5-F55-Firmware-Version-v4-11-and-AXS-R5-v4-1/m-p/410782#M19813
    <<Modification from V6.00 of F55 and F5>>
    Bug Fix
    When S&Q setting was set “On” in 2K Center Scan mode or 2K Full Scan mode and the power was turned Off and On, Recording did not work. This has been fixed.
    Sometimes specific All Files could not be loaded. This has been fixed.
    <Notification we would like to share>
    iOS setting for Wi-Fi Remote
    While using Wi-Fi Remote by iOS devices and Safari, please turn off Private browse function.
    All file Support
    All files which are created with Firmware V6.01 are not compatible with an earlier firmware version.
    << Version up procedure >>
    Please refer to “Version Up Guide for PMW-F55 and F5” - documents are below for download
    Firmware download:
    F5
    http://pro.sony.com/bbsccms/assets/files/show/highend/downloads/PMW-F5_V601_6.01_4_2015-06-24_14-42-14_firmware.zip
    F55
    http://pro.sony.com/bbsccms/assets/files/show/highend/downloads/PMW-F55_V601_6.01_5_2015-06-24_14-42-07_firmware.zip
     

    Hi, AlexK. I just found the answer for your question in F5/F55 user manual(v.6), on p. 46.In a word, you can't use your double speed viewfinder function.Refer to the last sentence.  Viewfinder Double Speed function is not effective on the following settings.- When System Frequency is 59.94/50.- When Recording format is SStP Sr-SQ 444 / SStP SR-SQ Lite 422 / SStP SR-SQ 422, ProRes 422, DNxHD 220x / DNxHD 145.- When "Setting" in "Slow Shutter" of the Camera menu is set to "On."- When "Setting" in "S&Q Motion" of the Camera menu is set to "On," and the "Frame Rate" setting is 1 to 60P. At this moment, it's not available to everyone.Hope Sony make it available with future firmware update, if technically possible. Bryan

  • WRT330N needs new firmware!

    I have owned a WRT330N since April 2007, and have noticed several issues with the unit. Some may be specific to my unit, but some are firmware related. What is most troublesome is that I reported the single port forwarding bug to Linksys back in May 2007, and they still have not produced new firmware...
    I list these issues not so much for help from this forum, but to share information with those who already own a WRT330N, or are thinking about getting one. These issues still exist with the newest firmware (1.00.3).
    Issue #1: Single port forwarding bug. Although the pulldown would indicate that you can specify TCP, UDP, or Both, no matter what setting you configure, it always displays (and saves) the protocol as TCP. I confirmed this by trying to single port forward TeamSpeak and setting it to UDP. Did not work. If I go to Port Range Forwarding, and configure it for a single port and for UDP, TeamSpeak works fine. Thus, all my single port forward rules that need UDP or Both have to be listed under Port Range forwarding.
    Issue #2: Over time, I have changed MANY settings on this unit. Most recently, devices attached to the WRT330N would periodically be unable to communicate to the router IP (192.168.1.1 by default). Pinging the IP just timed out. This condition would happen several times an hour, but only for a second or two. Reflashing the firmware seemed to resolve the problem. Note: this was not a firmware upgrade, I was already at 1.00.3; I just reflashed 1.00.3.
    Issue #3: Config file bugs. I have noticed that if I change a LOT of settings on the unit, then save the config file, I am unable to load the config file (router claims it is corrupted). This occurred not only on my WRT330N, but also on my WRT54GX as well. However, I did notice that I was able to save, then successfully load, the fully customized config file immediately after reflashing the firmware.
    Issue #4: Along with #2, the wireless transmitter seems to stop broadcasting for a minute or two several times a day. I will have a perfect connection for hours, and then bam, no signal. A minute later the signal returns. This issue MAY have disappeared after reflashing.
    Linksys is sending me a replacement unit in case this is a hardware problem, for which I am grateful. Unfortunately, this will not resolve #1 or #3, and Linksys' refusal to release new firmware is most troublesome.

    Hello,
         Just adding my name to the list of folks who believe that this router does need new firmware.   I had a WRT54G v2 for serveral years and as of late it had developed the bad tendancy to do something very odd with DNS queries, after a hard reset it would clear up for a while, but eventually would come back.  I figured that after several firmware updates over the years I'd just gotten a bad flash.
         I picked the WRT330N to replace it primarally just because I wanted a router that had a Gigabit Switch integrated and had prior good luck with LinkSys products.  It just seems that the new router doesent have some features that the old one did (i.e. it's a step backwards).
    1. If I port forward port 80 to my web server, and then use my external domain name which goes to my external IP, the router doesnt get me there.  My WRT54G did this with no difficulty.
    2. I could find no option to disallow access to the web configuration from the wireless.
    3. The router seems to reboot whenever you change trivial settings.  Much more often than the WRT54G.
    I dont know if LinkSys product planning looks at this, however I for one would say that I'd be happy with a WRT54G that was just updated with a Gigabit Ethernet Switch and otherwise all the same features as it had previously (including keeping the form factor that stacks on other linksys devices).

Maybe you are looking for