New Firmware upgrade 5D III

Could you provide metering on all AF points for 5D III as Nikon does with their cheap models too, please?

The santa rosa chipsets (2.2s and 2.4s) may not need the firmware ?upgrade. If my 2.4 had needed the upgrade, it would have shown up in Software Update, and it did not.
I don't mind this at all. Firmware upgrades could be problematic and I love to avoid them where possible. All of the iLife and iWork upgrades came up on software update for me and installed and are working fine.
Message was edited by: Rhyd

Similar Messages

WRT610N New Firmware Upgrade and USB Hard disk not working

Hi, I've just upgraded the new firmware, everything seems fine but now my USB Hard disk is not recognizable unless i restart the router. I have a Seagate FreeAgent 500Gigs, and it worked perfectly with the previous firmware. Just wondering if its just me or anyone else has the same problem.
Thanks
I forgot to add that afterawhile the hard disk isnt recognizable again and i have to reset it to get it working
Message Edited by jellydish on 02-13-2009 06:09 AM

The same thing is happening to me... After the HDD goes to sleep, when you goto access it again you can hear it spin up but you still can't access it at all.

PETITION: This is what I would like to see in a new firmware upgrade for the MTP ZEN TO

FIXES:
-Ensures correct playback on the player of Zencast audio content that has been transferred using Zencast organiser. Remaining time is displayed correctly, and rewind / fast-forward functions can be used
- Allows users to transfer tracks between folders on the player when using a program such as Creative Mediasource [THIS IS NEEDED FOR ALL MTP PLAYERS]
- Allows charging via USB when the player is not being used by a program or is low on battery [THIS FEATURE SEEMS TO HAVE BEEN REMOVED BY MTP UPGRADE]
ENHANCEMENTS / ADDITIONAL FEAUTRES [I HAVE LISTED THESE BY MY PERSONAL ORDER OF PREFERENCE]:
) Allows the playback of Audible content types ,2,3,4 on the player, via a plug-in in Audible Manager
2) Adds bookmarking feature to the player
3) Adds SmartVolume EQ feature to the player
4) Adds DJ menu to the player
5) Allows user to partition a section of the player for data transfer
6) Allows user to synchronise tasks from Outlook to the player
7) Allows TXT files/ Ebooks to be stored/ viewed on the player
8) Adds BassBoost EQ feature to the player
PLEASE SIGN THIS PETITION TO URGE CREATIVE TO INTRODUCE AT LEAST SOME OF THESE FIXES / FEATURES IN A FIRMWARE UPGRADE FOR THE MTP ZEN TOUCH - also please feel free to add other suggestions that would improve the functionality of the Zen Touch
Message Edited by joshua32 on <SPAN class=date_text>05-30-2006 <SPAN class=time_text>:7 PM
Message Edited by joshua32 on 05-30-2006 :8 PM

all of these would be awesome, as would lyrics support, I REALLY want that

New Firmware Upgrade Not Needed

I tried to download and install the firmware upgrade posted today (v1.4), which is supposed to take my BootROM to MBP31.0070.B03 (it is currently identified as MBP31.0070.B02 in System Profiler). However, when I run the updater, it tells me I don't need the update.
Any thoughts?

The santa rosa chipsets (2.2s and 2.4s) may not need the firmware ?upgrade. If my 2.4 had needed the upgrade, it would have shown up in Software Update, and it did not.
I don't mind this at all. Firmware upgrades could be problematic and I love to avoid them where possible. All of the iLife and iWork upgrades came up on software update for me and installed and are working fine.
Message was edited by: Rhyd

New blade = new firmware upgrade?

Hello,
I'd like to know whether a new blade server purchase means forcibly an upgrade of the existing UCS infrastructure to the newest UCS Manager release?
Thanks a lot,

CIMC's can by updated without interupting blades. I preffer updating CIMC's first, and have mixed 2.0 and 1.4 Bios and Mez card without any trouble a few times. Best to control CIMC, Bios, and Mez card code level with Firmware policies.
The 2.0 code has new OS drivers so be sure and check that out. Have mixed 2.0 and 1.4 a few times both ways and never made a difference. Due to a lazy SCCM admin ran 2.0 OS drivers on 1.4 blade firmware for a few months. Didn't make a difference. This is all with Windows 2008R2.
Over time have found that this is the best order for updating code levels on Cisco UCS. This way the UCSM keeps communication between itself down to the CIMC through the update process. Note that the IOM’s wait until their FI reboots to reboot and update code level.
This is considered the “Bottom Up” method. Some prefer the “Top Down” method but I have found it much less smooth and harder to recover from if something goes wrong.
Always backup configuration before upgrading code levels.
Should go
1)      CIMC
2)      IOM (which will wait until the FI’s update)
3)      UCSM
4)      FI X (Which ever is the current passive FI)
5)      FI X (Second FI)
Read more:
http://realworlducs.com/page/2/#ixzz1pHYurmep

6110 Navigator NEW Firmware Upgrade!!!

>
>Shot at 2007-08-10

11-Aug-200704:13 AM
delanz wrote:
I just update my phone about 30 minutes ago, from 3.51 to 3.58. No hassle, it took about 20 minutes. all my contact and installed apps are not wipe out. Havent look into what changed, but few things i notice was the fonts changed, and when searching contacts, previously when I type lets say 'c', it will list out all the names that began with 'c' only from the first word. Now, what it do is it will list all the names that has 'c' as the first alphabet, e.g name such as Michael Caine will also list out, where previously that name will only appear if we type in 'm'.Message Edited by delanz on 11-Aug-200704:13 AM
MY phone contact doesn't act as u claims, just update to 3.58 few hours ago, after restart still not function as urs.

Can't upgrade to a newer firmware.

Hi everyone.
I noticed that there's a new firmware upgrade for the N95-1 RM-159 (31.0.0.14) but when i load the nokia software updater, it tells me that my firmware is the latest firmware upgrade (30.0.0.15). why is that ? How can i fix that ?

V31 was pulled from NSU a couple of days after it was released. So, the latest version available to anyone is indeed V30.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Zen Micro Firmware Upgrade 1.01.03: Problems when Downloading and Installing the Upgr

Yesterday I downloaded the new firmware upgrade .0.03 to my computer without problems. I then attempted to open the upgrade and initiate transfer to my Zen Micro unit through my USB 2.0 cable. I kept getting a dialog box, informing me that there was an interference problem... So I shut down my Norton anti-virus and my Zone Alarm firewall, and tried again, and again, and again. I was unable to initiate the transfer program...
I was about to contact you this evening for advice, but I decided to first switch my USB cable to another connector and try one more time. Surprise! It worked... A rather long connection, but the upgrade is now in my Zen Micro unit, just where it's needed...
I've had my USB cable connected to what I believe is a USB 2.0 connection on my computer, and I often see the "not connected" dialog box. Each time this happens, I disconnect the cable from the Zen Micro unit, then reconnect it... Bells and whisltes sound, and I'm connected again, until a few minutes later I get the "not connected" dialog box yet again... Is this a normal procedure?
Now, tonight I plugged the USB cable into what I've always considered to be a slower USB connection point... Mybe that's why the transfer took so long? But it stays connected indefinitely... no "not connected" dialog box.
I've been having other transfer problems through the USB 2.00 connection point. I downloaded 23 tracks to my Zen Micro yesterday afternoon, and three of the tracks didn't make it... Frustrating as hell...
I'd appreciate any comments from my peers, since everyone here has more experience than me...
kooch

koochiching,
Try turning off the Media Sniffer feature from MediaSource and try updating the firmware again.
JasonMessage Edited by Jason-CL on 2-4-2004 0:27 AM

Firmware upgrade failure with zen Vision M 30

Hi Guys, new to this and need some help as it has been a few days waiting on anything sensible to come from Creative support. History. Daughter got the new creative vision M 60gig and gave old (0 months) 30 gig to Dad Smiles all round. Dad (tech support manager) loads up system software and re formats the dri've. Finds new firmware upgrade so down loads and goes through the prosess of updating. Now up to this point, unit was working fine and was seen by win xp in the 'my computers list' but is new to my computer. Selected reload firmware which erased the old and told me to install the new. I ran the downloaded .exe file (latest) and it told me it could not find a device. Spent last night looking over the web for clues. Windows media play was listed but it turns out that it was only the beta that had an issue (in any event, it would not let me remove it as it wanted to do a roll back but could only find ver to roll back to). Sent out message to creative who cam back and told me to roll back wmp (great help) and to change the permissions for USB which I did. This then caused my computer to blue screen twice (had to re boot in safe and exit to recover). Ran registry mechanic and it fixed several things but still the unit is not seen by the upgrade program. When I boot the player up, it detects it has a firmware issue and puts me in the recovery mode screen. But nothing I do gets the upgrade to work. Any one got any ideas?

I have a similar problem. I tried to upgrade my firmware. So it erased the one that was on the player, and when i try to install the new one the computer says the device isn't plugged in, even though when i plug it in the pop up menu is displayed and it says DOcked on the player and the player is charging

Did scan to Diskstation stop connecting with firmware upgrade CLP1CN1516AR

I use my HP 8600 N911g almost daily to scan to LAN network attached storage, in this case a Diskstation. As of today I cannot scan to the Diskatation any more, it just will not connect. I have tried powering off in turn the printer, the router, the diskstation, letting each sit for 1 or more minutes before restarting, to no avail. I can print from my laptop to the printer, i can ping it via IP address and computername, I can open up its web interface and test the network locations - four are defined on the Diskstation, none of them connect. I created a new definition of an existing folder on the Diskstation and tested that, it also could not connect. From my laptop (Windows 7 SP1 64) I can access the Diskstation folders fine through both Windows Explorer and a command line interface. HP diagnostic tools on my laptop all run fine except for the scan test, which pulls in both sheets of paper from the ADF tray but the second sheet does not quite get ejected and the test locked up my printer; cancel and power button did nothing so I had to unplug it. I noticed yesterday that my printer said it was downloading an upgrade but eventually it aborted. Today I ran HP 8600 tools and it said I was up to date. It reported firmware version CLP1CN1516AR, which I understand was released 7/20/15. Could this upgrade be the problem? My printer is connected via ethernet to a LinkSys router that is bridged wirelessly to a Verizon FiOS ActionTec router to which the Diskstation is ethernet attached. This system has been in place for a year or so. My laptop, bridged router and printer are all within 3 feet of each other, the ActionTec is 30' away through two walls, my latop rates the ActionTec 4/5 bars in Windows icon or -59 dBm from Xirrus WiFi Inspector, from near to the printer. Vey frustrating. Any ideas, please?

I was called by HP Support, they reached me Friday just as I was about to leave to go on vacation for two weeks. They had read this thread and knew it was more than just me. They acknowledged a problem and assigned me a case number but closed my ticket, I need to call them when I am back on the 24th August so we can work to find a solution. They will open a new ticket then.
I hope HP will contact you and open a ticket for you and resolve the problem and issue a new firmware upgrade including the fix so that I can try it when I return, but that might be a stretch as presumably it goes through some QA testing before they release it. At least they should start working on it with your help.
Please keep us posted on any developments.
For a workaround I enabled scan to computer and email scan. I tried webscan interface and it scans but when finished it says click the save button to save but there is no save button, the two scan and cancel buttons remain unchanged from before initiating the scan. I tried both of those and they do what they say they do and don't save. I can see a preview mini image of the page and if I hover over it it presents a series of icons including a diskette but when I click that I can go through the motions of saving but the file is empty. The email scan is easiest to use, I send to myself and it takes a few minutes after scanning to appear in my inbox and sent folder. From there I can download to NAS or forward as an email. But compared to scan to network it is much slower and more labor intensive.
Good luck, both of you (pcni & greylisted).

New firmware RV042 ?

new firmware upgrade for RV042 determined when
You can download the beta version from now on?

I am not sure that I completely understood your question. But currently the latest firmware available for the RV042 Series is FW 4.2.2.08
If there is a particular beta firmware available the only way to get access to it is to call the Support Center and open a case. Once the engineer has troubleshot and determined that you are experiencing an issue that we currently have a beta firmware for, they will begin escalation process to get you to the team that controls that firmware.
Thanks
Eric Moyers .:|:.:|:.
Cisco Small Business US STAC Advanced Support Engineer
Wireless Subject Matter Expert
CCNA, CCNA-Wireless

E51 firmware upgradation

hey man can i ask did u upgrade from the website or what and yes then from which region website?? because here in india i cant find any new firmware upgrade for e51. i also tried by nokia software updater but its showing the same version.

Hi man,
you should check this first:
http://europe.nokia.com/A4577224
if there was newer firmware with larger number,you can download it via NSU and upgrade your phone through this.
if you couldent seen newer firmware,your phone is branded and yor support network doesnt let you to upgrade your phone!!
NOKIA means:Night Of King In Alone

SA 540 Firmware Upgrade

I noticed that there was a new firmware upgrade available for the SA540 router. From reading the release notes it appears that the new upgrade will reset the router to factory defaults and the recommended upgrade is to print off the pages that willl need to be manually reentered with previous information and then manually reenterthe information after the firmware upgrade.
This is quite a pain as the previous version upgrade required the same manual reentering of everything. Is the upgrade path ever going to not require the manual reentering of information as this is getting a little old already or am I missing something in the upgrade procedures?
Thanks in advance.

Hello and good evening,
I will forward your question to product managers. More to come,
Andrew Lee Lissitz

N85 need a new firmware with CPU Clockrate upgrade...

Just Like Nokia 5800XM we need new firmware with less bugs and also Upgrading the CPU clockrate to 434Mhz which possible as we seen it on Nokia 5800XM for N85
any Opinions about it?
Message Edited by saeid1371 on 24-Sep-2009 11:45 AM

That is not going to happen as the processor on the N85 is already running at it's maximum clock speed.
The 5800 was underclocked (not overclocked) due to instabilities of the new v5 operating system. Once they had fixed the problems they restored it to it's actual speed.
Nokia will never overclock a device so it is not possible to increase the clock speed of the N85.
If you want a faster but similar phone you will need to upgrade to an N86.

If I upgrade my factory unlocked iphone to a new firmware, will I lose may apps, data or carrier unlock??

If I upgrade my factory unlocked iphone to a new firmware, will I lose may apps, data or carrier unlock?? I have a 4.3.3 firmware but want 5.0.1

If it's a genuine factory unlocked phone from Apple you should have no problems. I have had two, a 3GS and now a 4S, and they update and handle just like the locked phones. If it has been hacked in any way, though, all bets are off.

New Firmware upgrade 5D III

Similar Messages

Maybe you are looking for