New Flashing symbols on start up

I was on a plane and started up my MAC. A square with the world flashes for a bit then switches to an alternating "?" and a folder icon. This flashes for a bit and then the MAC converts to its normal start-up screens. I am back home and reset my geographic city back to normal and everything else seems to be working fine. Is it trying to tell me there is a problem?

AnalogAbacus:
Welcome to Apple Discussions.
You need to set the startup drive for computer so your computer does not have to search for it before booting. Here's how:
While booted and logged in
Go to Apple Menu > System Preferences and launch
Go to Startup Disk
Select your HDD as the Startup Disk
Click Restart and authenticate if necessary.
Your computer shout restart from you internal HDD or whichever startup HDD you selected.
Cheers
cornelius

Similar Messages

MacBook Pro slowed down and now will not start up- flashing symbols on start screen.

I am increasingly worried about my MacBook Pro. It had been slow for a few weeks (I think it may be infected with some kind of malware), slowed down even more, and then a couple days ago when I turned it on it flashed a question mark folder, a prohibitory sign, and the apple logo on the startup screen and will not go past that. I followed the instructions on an apple help page for this issue- Nothing connected to it; I even removed the apple power cord. I tried a safe boot. I reset the NVRAM. It said to try starting up from an OS install disc, but my computer did not come with one. Here's the bit where I'm not sure if I made a stupid decision; another site said that the computer will download a recovery partition if there is no install disc, so I booted while holding down C even though I had no disc. I then read that holding option on startup will allow you to choose which disc to start from- I did that, and the only option displayed is a disc called Recovery (with a number after it that I think was 10.something, presumably referring to the OS version). Does this mean I have lost access to my computer's Macintosh HD? Have my files been lost? Unfortunately I do not have them backed up. Bad decision on my part.

Thanks for the quick response.
Command-option-r does take me to a screen with a spinning globe. Below the globe is a drop-down menu from which to select a wi-fi network. My network, however, is not listed. (I am now sitting right by the router, and my iPhone is on the wifi without any problem.) I go instead to manually type it in. I have triple checked the network name and password. I have used both the WEP key, which I have always used, and something that the sticker on the router refers to as the Mac ID, which is the WEP but with two zeros before it. Still the screen shakes as if I have entered the wrong password. I'm not sure what's going on now.

Site failing starting 9/21 with new Chrome and new Flash updates - PLEASE HELP!

I have a vertical site for boating with 110,000 users. The main part of the site is based around a 400KB swf that is mostly AS3. It has worked flawlessly for years. I haven't updated it in about 4 months. There has been no server update that would be causing any issues at all in at least a month.
All of a sudden on 9/21, some users started complaining that the main map view was all white. Other things are not working correctly either. It happened mostly with users who had automatic updates turned on in Google Chrome. I understand that a new Flash version was auto-installed as a part of a Google update yesterday.
I went to the Adobe Flash page and was prompted to update my player although I have 10.3.183.10 installed. I didn't do that.
Today people on other platforms are complaining that they're getting the same white screen although the bulk of our users are having no problems, probably because they haven't been updated. It seems to happen in Internet Explorer and Firefox starting today. I have a feeling these people had their Flash version updated.
I updated to the beta v11 and now I'm experiencing the white screen blank problem - it is perfectly reproducible.
To view the place where this is happening, go to:
https://activecaptain.com/X.php
The problem occurs on both OSX and Windows. I don't think it is operating system involved at all.
There are no errors, warnings, messages, traces, etc. coming out on the developer windows in Safari in v11. Absolutely everything appears perfect except it isn't working at all.
This is causing a major problem and I don't know what to do.

Hi JeffActive,
Sorry for all the inconvenience you encountered so far.
We did investigation on your problem and found out it's related with our security update on 9/21/2011.
When load your website with debugger plugin player, the following stack overflow errors are found:
AS error occurred:
Error: Error #1023: Stack overflow occurred.
                at com.afcomponents.umap.gui::UIMapControl/getClassByName()
                at com.afcomponents.umap.gui::UIMapControl/getClassByName()
                at com.afcomponents.umap.gui::UIMapControl/getClassByName()
This haven't been seen in flash player no later than 10,3,183,7.
By confirming with our developers, in 10,3,183,10, we added some checks to detect stack overflow conditions. That's why 'Stack Overflow Occurred' errors are detected in your codes.
If go to below security bulletin page, you can find more detailed information of security updates in 10,3,183,10:
http://www.adobe.com/support/security/bulletins/apsb11-26.html
As there are stack overflow errors in your codes, flash player(later than 10,3,183,10) avoids loading it. To fix the problem, need to fix those AS stack overflow errors in your codes.
We don't have the source code of your swf file right now, so can't tell which AS codes cause this stack overflow issue. Could you test your swf file in our latest debugger player(10,3,183,10), then find out which lines of AS codes caused the problem? Once the stack overflow issue is solved, the swf should be loaded correctly.
Again, sorry for all the inconvenience cause by this new security changes. We're improving our player to be more secure. We would be glad to work with you to solve your problem ASAP if any help needed from us.
Thanks,
Yan

How to Edit Flash Symbol in Photoshop?

In Flash CS4, I have a graphic of a long filmstrip with 24 pix in it. I need to edit the symbol in photoshop (to put all new pix in), and then replace the current filmstrip with the new filmstrip. How? This is CS4, not CS5.

Add an image to a folder with your fla, image folder(with image inside) and then re import image to stage again then try 'EDIT' the file!
Date: Sat, 24 Sep 2011 13:31:35 -0600
From: [email protected]
To: [email protected]
Subject: How to Edit Flash Symbol in Photoshop?
    Re: How to Edit Flash Symbol in Photoshop?
    created by sneedbreedley in Flash Pro - General - View the full discussion
Whe nI double click on the image, a Bitmap Properties window opens with no option to edit. When I right-clcik on the image and select Edit With and choose photoshop, an error message appears saying The file G:\web-02\Site\film120902.gif does not exist, uable to launch external editor.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3936238#3936238
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3936238#3936238. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Flash Pro - General by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I can't install new Flash player on my Mac

problem with new Flash player installation on Mac 10.9.5 and Safari : it download, starts installing and stops at 81%.
I went through all the proceedings shown on Flash Player support and it still does not work

Did you also try the offline installer http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg ?

How to set a New Tab as the start page in Firefox and lock in my choice of web sites

You may set the New Tab page Firefox shows when opening a new tab as its start page, and you can lock in the web sites you want displayed there.
I set my browser to open a New Tab as its start page and have locked in six destinations from which to choose on my start page.
First I open Firefox and open a new tab. Then I delete any open tabs other than this New Tab. Optionally, I can also set a second tab to open to a specific web site
Next I go to Tools and Options (or Edit and Preferences in Linux) and select the General tab on the far left. Click on
[Use Current Pages].
Each time I open Firefox it will open showing me the New Tab.
I can select from pages that I have already visited the six pages I want to have appearing on my New Tab every time. Supposing there are no pages locked in yet, and I don't want the site in the top left. I hit the X in its thumbnail's top right corner, it disappears and every other site thumbnail moves up and there is a new site appearing in the sixth slot. Note that if I have visited one page frequently, it may appear more than once, or be replaced by itself. If that happens, just keep deleting until the page you want shows up.
If I find a site that I want to save, then there is a thumbtack in the top left corner of the thumbnail. It is black, but if I click it it turns blue, and the thumbnail is a keeper.
This web site is in the second row, second over, but I want it to be up on the top row. Just drag and drop and the two sites exchange places. Make sure it has a blue thumbtack. The lock-down thumbtacks and delete X symbols appear in the top left and top right, respectively while the mouse is hovering over them.
It is possible to delete a saved site, and it is possible to undo the thumbtack. Simply click the X to delete or click the blue thumbtack to unlock the site and turn the thumbtack black.
You may choose to tack down a few sites and let the remainder float in and out, driven by your browsing history.
Through my use of this approach, I have instant access to my club's web site, two Webmail sites, and some other often-visited places on the Web, all in one start page.
About the only thing I really don't need there is a Google search box, for if I enter my search terms in the address bar I get the same result as if I had specifically typed in the search box.
Some add-ons, often potentially unwanted programs (PUPs), will replace the Firefox about:newtab (address of the New Tab) with eBay, Facebook, Twitter icons among others, and a different search engine. These icons may have a nicer appearance than the default Firefox New Tab, but you may also be looking at extra, unnecessary work for the computer, especially if behind the pretty icons there is a hidden agenda.
Personally, I would stay clear of these add-ons, and perform some scanning with an up-to-date antivirus and antimalware software.

If this is not a pinned (App) tab then the home page should open in that tab.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Found 2 bugs in new Flash Builder 4.7

Hello.
I've just migrated all of my large projects to the new Flash Builder 4.7 (from 4.6) and they all work well except for the 2 annoying issues:
1. I don't know why, but FB no longer allows me to create "config" packages. It says "config is a reserved word in ActionScript and cannot be used." Wtf? I had lots of projects using such names in FB 4.6 and didn't have any issues with it. Is it a new rule in FB 4.7? If so - then why it was introduced and was introduced only now? ActionScript language and FB exist not the first year... Also after i migrated existent projects i see all "config" packages have non-standard "folder" icon in the source file tree (in the package explorer panel).
2. There are strange warnings started to appear - "the import BLA-BLA-BLA is not used locally", but I am not blind - I see it is used just a little bit below in the code. What is wrong with this?
Please help as I am confused now about what to do... I waited for FB 4.7 for so long and now I think I will need to downgrade...

Hi Infeter,
For 1;
After the number of hours I have lost debugging issues where someone has inadvertently named a variable the same as a package that is on the root, so making it impossible for FB to discern whether I am talking about "aname.veryImportant" as the sub-package "veryImportant" of the package "aname" or the property "veryImportant" of the variable "aname", I welcome any and all new warnings of how a coder may inadvertently break Flash! So, if they are saying it is a reserved word, it is probably because there is a core class, variable or other such that will, at some point, bite you if you name something after it. This has always been the case with, for example "default" - default is a keyword that has real meaning for the compiler and you will not be allowed to define things as "default" because of the potential for confusion (are you issuing the "default" directive in a switch statement or are you referring to the "default" value in your class?). Given that FB has the frankly excellent "Refactor" function to allow you to easily rename packages, members and classes, I'd just be happy to rename the offending items and be glad to have saved myself several hours of painful debug later on.
For 2;
I'm surprised you're seeing this warning for classes that are not used. I've found loads that were added in automatically over the years that simply are not used. I'm loving the way I can clean out about half my import statements now. The thing to do is to comment out the imports and check that everything still works. If it does, then you're laughing, you don't need them. If it triggers errors of not being able to locate the class, then I would put together a code snippet and add it as a comment to your bug report.
G

News "FLASH"... Nancy O (the legend) ... i need help again

I am trying to put a banner on my website for my exam.... It will have to have an image with logos flashing across and stopping for a few seconds before carrying on.and out the other side. I have looked up everywhere to see how this is done but with no joy. There is lots of info out there but it is not working for me. In Flash i have no problem creating a banner image with various logos moving from one side to the other or even changing the image from one shape to another or bouncing it up and down the stage from one side to the other. I can even stagger the timelines for the logos to make them enter one after the other. The one thing i can not get to grips with is making the images stop or pause after they have entered from one side before exiting the other side. I have followed step by step many youtube tutorials but the authors are wizzing through them too fast and despite folling every step second by second, i am missing a vital step somewhere. Would someone please let me know step by step (and please assume i am an idiot when doing this) the sequence i must follow from the very begining to the last step when i publish.

Noooooooo........ When i saw your email notification i had high hopes of getting the answer i have been trying to work out for two days....but no problem ..your still a legend ha ha ... you got me out of a big hole in this project the last time... but thanks for taking the time to reply, i will try the other forum.
Date: Thu, 26 Jan 2012 17:28:18 -0700
From: [email protected]
To: [email protected]
Subject: News "FLASH"... Nancy O (the legend) ... i need help again
Re: News "FLASH"... Nancy O (the legend) ... i need help again created by Nancy O. in Dreamweaver - View the full discussion
You'll get better answers in the Flash Forums for whichever Action Script ver you're using.
Sorry. I don't do much Flashy stuff anymore. As far as I'm concerned, when Apple iDevices quit supporting Flash, it became a dying web technology.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4167793#4167793
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4167793#4167793. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Just updated Firefox to 3.6.9 Adobe was updated also. Why does Adobe keep trying to update everytime a new Firefox window is started?

This action is very annoying. Whenever a new Firefox instance is started, a window pops up saying it is updating Adobe. Then another window comes up showing what is being updated. But it is blank.

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 10.0 r45
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
You can find the links to download the Flash plugin for Windows at the bottom of this page:
Adobe - Common Flash Player download and installation issues (Windows): http://www.adobe.com/products/flashplayer/support/index.html
Go to: 3. Download Adobe Flash Player : Flash_Player_10_Plugin (All other Windows browsers)

Importing flash symbols from an external SWF using URLrequest

Hello.
I'm trying for several days now to properly import flash symbols into a flex application.
i can't only @Embed because the swf file that contains the skins will not be available locally so i need to use URLRequest.
This is what I've got so far.
1. I created a flash file, lets call it foo.swf that contains several elements in the library and each element has both `Export for ActionScript` and `Export for runtime sharing` on. one of the elements is called 'test' which is a movieclip of an image.
2. i created a flex project that creates the swf flashSkins.swf that contains the following Wrapper class:
        package
            import flash.display.Sprite;
                public class Wrapper extends Sprite
                 [Embed(source="foo.swf",symbol="test")]
                    [Bindable]public static var test: Class;
I tested to make sure that this class properly fetchs symbols from the flash file properly
using the following code:
    <fx:Script>
        <![CDATA[
            public var wrapper:Wrapper;
        ]]>
    </fx:Script>
        <mx:Image source="{Wrapper.test}"/>
it loads the image and shows it properly.
3. I created another swf file that will fetch the flashSkins swf and import the Wrapper class from it. this is where i fail.
        public function loadSkins():void
                bgLoader = new Loader();
                var bgURL:URLRequest = new URLRequest('http://files.xpogames.com/flashSkins/flashSkins.swf');
                bgLoader.contentLoaderInfo.addEventListener(Event.INIT,onLoaded);
                bgLoader.load(bgURL);
            public function onLoaded(e:Event):void {
                var clazz:Class = bgLoader.contentLoaderInfo.applicationDomain.getDefinition('Wrapper') as Class;
                var a:Object = new clazz();
                theimage.source=a.test;
        ]]>
      </fx:Script>
        <mx:Image id="theimage" />
I tried using getDefinition with 'wrapper' or 'Wrapper' but on both cases i get an error that the variable is not defined.
any ideas?

Did you try using the Event.COMPLETE instead of Event.INIT?

Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?

The documentation for Flash Builder 4 beta says that after opening flash from flash builder, I should click a "done" button in flash and flash should close and what I created in flash should be included as a component or container in Flash Builder. Using the Flash Builder 4 beta on Windows, when I click on the "create in flash" button on the properties panel for either the new flash component or container, Flash CS4 opens, I create something in Flash and no "done" button is present. Nor is anything present in the menus resembling a "done" option. Where is it?

Hi Jeffrey:
Still no done button. Now under commands in Flash I can convert symbols to flex components and containers and these show up in the Flash library.
Thanks:
Jim
Date: Wed, 30 Sep 2009 09:58:10 -0600
From: [email protected]
To: [email protected]
Subject: Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?
Hi,
You may need to install FlexComponentKit.mxp to your Flash CS4 beforehand.
Jeffrey
Date: Tue, 29 Sep 2009 17:04:36 -0600
From: mailto:[email protected]
To: mailto:[email protected]
Subject: Flex Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?
I apparently didn't get one. I've looked under various workspace configurations. Another thing that seems odd is that when Flash opens I get the opening panel that allows me to select the type of file and version of AS I want to use. I select new file with AS3. Any ideas on why the "done" button wouldn't be present and if the opening panel is what I should expect on opening Flash after clicking the "create in Flash" button?
>
>

New Flash Media Encoder

So, I've been playing with the new Flash Media Encoder here:
http://labs.adobe.com/technologies/fme/
It was a really simple download and works seamlessly with
Flash Media Sever. I think you have to update FMS2 to the January
07 update to use it, though. Anyway, below are some options for
trying it out. Have fun :)
Per Chris H from adobe:
1. You don't need a main.asc file on your FMS app to publish
and broadcast live streams with FME.
2. You can get a live stream from FME to playback in the
normal FLVPlayback component that ships with Flash 8 Professional.
Just make sure you have the "isLive" parameter set to true and the
contentPath should be:
rtmp://server_name/app_name/inst_name/stream_name.
Option from FMS livedocs:
1 New Flash Document with two layers: actions and video
display.
2 Add this code from the FMS livedocs to the actions layer:
var my_nc:NetConnection = new NetConnection();
my_nc.connect("rtmp://<YOUR RTMP ADDRESS>/streamtest");
var my_ns:NetStream = new NetStream(my_nc);
my_video.attachVideo(my_ns);
my_ns.play("stream");
3. Open Window > Library > Click little dropdown toggle
next to library title and select a new video display object and
specify actionscript control.
4. Drag Video Display out of the library and give it an
instance name of my_ns and publish it. I used a laptop for this
part so that I could stream to the file from my FMS server. I saved
the .swf as video_receiver.swf.
5 Stop Flash Media Server and create a folder called
streamtest in the FMS Apps folder, then start it again.
6. Fire up FMEncoder, specify the RTMP address you specified
in the Flash 8 AS code, and be sure that the stream is named,
"stream" (no quotes). Also, toggle off the save stream file, unless
you want to save the recording.
7. Click start on FME and open the video_receiver.swf and you
should see the stream playing.
Another idea:
Use the receiver from this tutorial:
http://www.adobe.com/devnet/flashcom/articles/broadcast_receiver.html

We have our own FMS and I have just installed the FME on a
workstation. FME reads video perfect but when I try to connect to
the server it won't accept my username and password. Where do I set
this? I have installed the add-in for FMS and also upgraded to the
latest 2.0.7 release. I'm green to the Flash Media Services so this
may come as a dumb question. Please help!

The new flash player update crashes internet explorer and firefox

The new flash player update crashes internet explorer and firefox, please send a new release to fix the problem ASAP!

ok   here's more mystery. i just uninstalled and reinstalled flash player using the adobe uninstaller and rebooting after each step. aqlso installed latest java. i started looking at videos and here are the ones that worked: you tube
                                                                                       imdb
                                                                                       hulu
                                                                                       ebaumsworld
                                  here are the ones that didn't work:    yahoo
                                                                                       msn
                                                                                       reuters
                                here are the ones that partially worked: the blaze (works on videos that originate from you tube, but not from news stories)
                                                                                          bing (work on videos from their video section - entertainment type, but not from news videos)
the common thing here seems to be that news type videos crash and entertainment type don't. also videos seem more likely to crash on internet portals like yahoo

Flash Symbol w/ filters + spark parents + Fade effect bug

I've come across an interesting bug which I've narrowed down to a combination of:
• Flash symbols containing 1 or more Filters (defined in the Flash IDE)...
• Parented within certain Spark components (ex. symbol in Group that's in another Group)...
• Modified by an effect like spark.effects.Fade
What you see when you combine those elements above is a 1-frame, fully-opaque flicker after the Fade has completed (if fading out) or before it begins (if fading in). This flicker is noticeable and obviously not an intended part of the animation.
Here's a small test project that reproduces what I'm talking about. If you change the VGroup component to a VBox the flicker stops happening (at least for me). The same is true if you remove the middle DataGroup component. (The bug may not stop altogether but it does occur less frequently in that case.)
Application.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx"
               xmlns:local="*">
     <fx:Script>
          <![CDATA[
               import mx.collections.ArrayCollection;
          ]]>
     </fx:Script>
     <fx:Declarations>
          <s:Sequence id="sequence">
               <s:Fade target="{ vbox }" alphaTo="0" />
               <s:Fade target="{ canvas }" alphaTo="1" />
               <s:Fade target="{ canvas }" alphaTo="0" />
               <s:Fade target="{ vbox }" alphaTo="1" />
          </s:Sequence>
     </fx:Declarations>
     
     <s:VGroup id="vbox" horizontalAlign="center" horizontalCenter="0" verticalCenter="0">
     
          
          <s:DataGroup id="dataGroup" dataProvider="{ new ArrayCollection( [ BasicSymbol, SymbolWithGlow, SymbolWithBevel ] ) }">
               <s:layout>
                    <s:HorizontalLayout verticalAlign="middle" />
               </s:layout>
               <s:itemRenderer>
                    <fx:Component>
                         <local:DataGroupItemRenderer />
                    </fx:Component>
               </s:itemRenderer>
          </s:DataGroup>
          <s:Button label="Play" click="sequence.play()" />
     
     </s:VGroup>
     <mx:Canvas id="canvas" width="200" height="200" horizontalCenter="0" verticalCenter="0" backgroundColor="0xCC6600" mouseEnabled="false" alpha="0" />
</s:Application>
DataGroupItemRenderer MXML
<?xml version="1.0" encoding="utf-8"?>
<s:ItemRenderer autoDrawBackground="false" width="70" height="70"
                xmlns:fx="http://ns.adobe.com/mxml/2009"
                xmlns:s="library://ns.adobe.com/flex/spark"
                xmlns:mx="library://ns.adobe.com/flex/mx">
     <fx:Script>
          <![CDATA[
               override public function set data( value:Object ):void {
                    super.data = value;
          ]]>
     </fx:Script>
     <mx:Image source="{ data }" />
</s:ItemRenderer>
In addition to the below MXML, I am also happy to provide the FLA that I've created the symbols in as well as a video demonstrating the glitch. (I will try to attach the video as a follow-up comment.)

Suppose not.
Defect created: https://bugs.adobe.com/jira/browse/SDK-30475

Why doesn't the new flash player I downloaded work on my mac?

Hi,
I download the last new flash player on my mac under Lion and I can't open some website like adobe websites

Hi Sunil,
I try http://www.adobe.com/software/flash/about/ and the file attach is the result: a white page.
I uninstall it yesterday and download the last version on adobe
it's on firefox, I can use safari but I need to reload many time to have something
Le 27 sept. 2011 à 13:09, Sunil_Bhaskaran a écrit :
Re: Why doesn't the new flash player I downloaded work on my mac?
created by Sunil_Bhaskaran in Flash Player - View the full discussion
After downloading, you need to run the installer.
Could you please visit this site: http://www.adobe.com/software/flash/about/
If Flash Player is installed in your machine, it will give you the version number.
In the following link, you have step-by-step instructions on installing Flash Player on Mac:
http://kb2.adobe.com/cps/908/cpsid_90893.html
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3940045#3940045
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3940045#3940045. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Flash Player by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

New Flashing symbols on start up

Similar Messages

Maybe you are looking for