New Flip minoHD camera at 60fps. Will PE9 preset work?

Flip has recently introduced their new mino HD video camera that has a frame rate of 60fps. The new PE9 has a preset for the Flip minoHD, however this preset is set at 30fps. Will the PE9 preset work with this camera? Are there any special editing issues with video at 60fps that I should know about? If I keep the output resolution to 1280x720 will that help in rendering speed? (Does PE9 support "smart" rendering?). I'm new to video editing so I hope these questions make some sense.

I'm not quite sure of Flip's strategy, going to 60 fps. It's not like the human eye can see the difference between 30 and 60 fps. So it would seem to my limited understanding that you're just creating a lot of extra video frames!
Oh well.
Many camcorders use 60i. This is technically not 60 fps, but it's really just 30 integrated frames (each frame composed of two interlaced frames). But this is based on the old TV standard, back when ALL TV video was composed of integrated frames.
The Flip, though, seems to spec out with 60 progressive frames -- or 60 genuine frames per second. Hmm.
Anyway, I'd assume you can use it with one of the existing Flip presets. But I'd sure like to hear the definitive answer for my own personal reference.
As for Smart Rendering -- Technically smart rendering means that the same video goes in as comes out, except when effects are added. So, no, Premiere Elements doesn't do this with Flip video. Though it does seem to edit Flip video natively, which is very different.
Editing video natively means that the program works with the video in its native state, without constant rendering. Native editing is indicated by the fact that, when you add the clip to a timeline in a properly set up project, there will not be a red line above the clips.
Sorry for the long post, but you've asked some very deep questions!

Similar Messages

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W.

I have restored my iphone but camera shutter still will not open/work, i have restored my iphone but camera shutter still will not open/work

I have restored my iphone but camera shutter still will not open/work

Try closing the Camera app completely and see if then works when you re-open it : from the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

New Mac OS Yosemite coming this fall. Will Creative Cloud work?

Apple is releasing the new OSX Yosemite this fall. Will Creative Cloud work without problems or will we be faced problems that Apple blames on Adobe or Adobe blames on the operating system?

Hi JGCreate2010,
Yes, Creative Cloud applications are working in new Mac OS Yosemite.
You can follow the link: Creative Cloud Help | Install, update, or uninstall apps is order to install the applications.
Let me know if it works or not.
Thanks,
Ratandeep Arora

I've been using a flip video camera since 2009 and all of my videos are in the flipshare library. What is the best way to burn all these videos to a DVD that will play on my DVD player/tv?

I've been using a flip video camera since 2009 and all of my videos are in the flipshare library. What is the best way to burn all these videos to a DVD that will play on my DVD player/tv? The flipshare library is taking up too much space on my Macbook and I wanted to delete these videos once they were all tranferred to DVDs.
Any help is greatly appreciated.

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

HT3910 Original OSX 10.5.6 and app dvd's (that came w/MBP) lost,and have recv'd replacement dvd from Apple. Once hard drive is erased and new OS w/dvd instl'd, how do I insure all applications bundle - that came with MBP - will reinstall?

Original OSX 10.5.6 and app dvd's (that came w/MBP) lost,and have recv'd replacement dvd from Apple. Once hard drive is erased and new OS w/dvd instl'd, how do I insure all applications bundle - that came with MBP - will reinstall?

Your profile says you have 10.6, so why bother with the original 10.5 OS?
But to your question, before you erase anything, make a backup of your data for safe keeping and restoration. Having an external hard drive for this purpose is most useful.

If I install dng converter version 8.3 so I can read raw files from my new sony a7 camera, will I still be able to read raw files from my canon 5d ?

if I install dng converter version 8.3 so I can read raw files from my new sony a7 camera, will I still be able to read raw files from my canon 5d ?

Ok. That explains 8.3. I know some want to stay with 10.6 because they have software or hardware that won't work on anything later.
Gene

Running CS5 on a Macbook Pro. Will not read raw files for a new Canon T5i camera.Can update the current RAW?

Running CS5 on a Madbook Pro. Will not open RAW image files from a new Canon TRi camera. Can I update to latest RAW processor with current CS5, or must I update to CS6 on the MacBook?
Jack

ACR 7.4 is the one that will read T5i raw files and it is CS6 specific. You can upgrade for $200 Standard or $400 Extended in you need 3D support.
You can also see if converting your T5i files to .dng format will do just as well.
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 7.4

I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?

I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?

carolweiler wrote:
I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?
See:
Camera Raw plug-in | Supported cameras
You need the 8.2 version of the ACR module, and PS10 is too old to be updated.
So, you can choose between 3 solutions:
- update PSE to PSE12
- use the Canon software to convert the raw files to the tiff format which PSE10 can handle
- download and install the free Adobe DNGconverter which is able to convert a whole folder of CR2 raw files to the Adobe DNG raw format which PSE10 can handle.
The last two solutions are free.

Why is it on the photo app is that when you add your photos to new albums and when you are deleting from camera roll it will delete photos from everywhere so therefore once your photos are in the albums you have chosen you cannot delete f

Why is it on the photo app is that when you add your photos to new albums and when you are deleting from camera roll it will delete photos from everywhere so therefore once your photos are in the albums you have chosen you cannot delete from camera roll

Your photos are actually all in the Camera Roll. The album you create only contain pointers to these pictures. Albums are like music playlists; when you delete a song from the playlist it doesn't delete the song from your music library. But when you delete a song from your music library it will also be deleted from any playlists that it may have been in as well.

Lightroom says that I have the latest version, but Lightroom does not recognize RAW captures from my new Panasonic DMC-GH4. When will an update for this camera be available?

Lightroom says that I have the latest version, but Lightroom does not recognize RAW captures from my new Panasonic DMC-GH4. When will an update for this camera be available?

The GH4 must be very new as it’s not listed in Adobe’s supported cameras, so wait until the next version of LR. Usually there is one every 3-4 months with a release-candidate available at Adobe Labs before that: http://labs.adobe.com/
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

IMovie 8 and Flip Video Cameras

From reading previous posts, I see that iMovie 8 does not automatically convert video formats as did previous versions.
I am having difficulties importing Flip Video video files into iMovie 8. I am wondering if anyone has a simple answer to the question, if I have Quicktime Pro, what format should I save the Flip Video files in, so they will import into iMovie 8 (Flip Video video format: Advanced Profile MPEG4 AVI)
I've managed to do it once, but can't retrace my steps...To be argumentative, if iMovie 8's appeal is for a quick video for YouTube, Web, why did they make it so difficult to import video clips, my opinion, that should be the easy part!
Thanks for your help and suggestions
School1001

My MAC Updater downloaded the new QT 7.4.5 on 5 Apr 2008. I have been making movies in iMovie, and then posting them to YouTube. In the beginning I uploaded the movies as MOV files but soon discovered AVI files (larger file and longer time to upload) had more clarity when viewed on YouTube. Once the new QT 7.4.5 downloaded all my AVI files had picture, but no sound! I downloaded the Perian component as posted in QT discussions. The sound returned to the AVI files. However, when I Exported an AVI movie from iMovie the picture quality was worse than the MOV movie. There is something wrong with the new QT 7.4.5 when working with AVI, my AVI movies look terrible. These AVI files were all downloaded from my Ultra Flip Video camera with Flip’s codec 3vix. Flip is aware of this problem and acknowledged it last Friday. Flip says Apple is aware of the problem.
My MAC PowerPc G4 has performed well in the past two months when working with the Flip Video camera. So, at Flip Video’s suggestion I upgraded the operating system to OS 10.5 from OS 10.4.11. Flip Video says their camera works with OS 10.5. Once OS 10.5 was uploaded I soon discovered that iMovie 08 would not operate on my PowerPc G4, 1.86 MHz. The speed requirement for iMovie 08 is 1.9 GHz.
At this point of “spinning my wheels for nearly a month” with this Flip Video camera, I decided to purchase a new iMac. On May 2, 2008, I walked out of the Apple Store in Walnut Creek with the new iMac 20-inch: 2.66GHz. Now the Flip video camera should work and all my video problems solved. However, this was not to be.
When I attempted to Import Flip Video AVI and MOV files into iMovie 08 the files were “grayed out” and would not Import. None of my previous Flip Video files would Import. I tried making new Flip Video movies, they also would not Import into iMovie 08.
At another Apple Store, the tech suggested I download the previous version of iMovie HD. I did this and with hours of working through the different Export options I was able to create movies to post again on youTube. However, the picture quality of the newer iMovies has never approached the quality of my last post before QT 7.4.5 downloaded. Remember my problems started with QT 7.4.5. Well, my new iMac came with QT 7.4.1, I have not Uploaded QT 7.4.5 and won’t until Flip Video fixes this problem.
Examples of my Flip Video movies can be viewed on youTube at: sffoggydays. The last video with excellent picture quality was posted 6 Apr 2008 titled “A Day at the San Francisco Zoo, Chapter Nine, L-Taravel Ride to BART.” This video was made in iMovie and Exported before QT 7.4.5 downloaded. All the youTube Flip Videos made after 6 Apr 2008 have poor picture quality.
It is time for Flip Video camera to stop “passing the buck” to Apple. When manufactures of operating system such as Apple and Microsoft create newer and upgraded systems, it is the responsibility of the manufactures of applications to redo the programs for operating on the new systems. Here is where Flip Video is not accepting this responsibility to Mac users of their camera. The Flip Video application/codex/drivers need to be updated in order to fix the following problems:
- No sound on AVI files in QT 7.4.5
- No Import of AVI and MOV files in iMovie 08
- Poor picture quality for youTube in Export of iMovie HD
I like my Flip Video camera, want to continue making movies for youTube, and recommending the camera to others. The Flip Video camera people need to fix these problems for Mac users.

Importing Flip MinoHD videos into iMovie '09

I've successfully managed to import videos into iMovie '09 from my Flip MinoHD. There's one annoying thing, though...
When I plug the camera into my computer, iPhoto opens instead of iMovie. Does anyone have any idea how to tell Leopard to open the right program for the MinoHD?

I would suggest that in GarageBand you use SHARE/TO iTunes or SHARE/To disk.
You can either use no compression or use Compression and choose AAC encoder.
Start iMovie. The track should be available from within iTunes through the Media Browser in iMovie.
If you shared to disk, you will have to locate it in the FInder and drag it into your iMovie Project from there. I do not recommend this, because if you ever move your file to another location, your project will not be able to find it.
That assumes you want to continue editing in iMovie.
Alternatively, you could finish your iMovie, then SHARE/TO MEDIA BROWSER. Then in Garageband, bring the video file into your project from the Media Browser in Garageband, and continue audio processing in GB. Then you Share the finished product through GarageBand.

New Photosmart Plus B209 a-m Will not connect wirelessly **HELP**

I just purchased this printer and i have tried every option I can think of and find online to get this printer to connect to my netgear router, I had a wireless canon printer that i had for a while that quit so i went and bought this printer and now it wont connect i've never had this much trouble my canon connected right away. I changed my router settings and hit my WPS button for this printer and still nothing. When i click on the wireless option on the touchscreen menu on the printer it just says "No connection found" and the option on the solution center for USB to Wireless just runs and runs for hours. Any ideas? Thanks a bunch in advance!!

Hi- Cliff here.
I have the exact same printer. After I installed the software from the CD that came with the printer, I used the Wireless setup tab to configure my connection. You need to know about your network. Things like WEP, and most importantly- select the shared key if you use a 64 bit or 128 bit encryption. Mine would not work until I fixed the setup on the printer side of the wireless configuration. Type in your key (or passphrase) that's the same one you'd use on your laptop or desktop that is on the wireless network. Unless you have to- leave the settings to automatic on discovery of the IP address and DNS servers. You usually don't have to mess around with those on a home network. Make sure the printer is connected to the computer that you've installed the HP software on- with the USB cable when you start this process so the software can communicate with the printer. I used the "wizard" and after about 6 or 8 steps, I was able to remove the USB cable and put the printer downstairs. Then I simply used the Windows Vista "Add Device" for a printer on my network and Wahoo!!
I hope that helps. If not, write back to me and we can do a more detailed step by step overview.
I must say, once you get it all set up- it's a great printer and VERY inexpensive to operate. Ink is cheap and this printer is very fast over my network. I use my ACER Netbook all over the house and print from the garage and the front yard and the living room and even inside my RV!!
We will get it working.... Together....you are not alone in this.
Cliff Van Ness
Spokane, WA
What's the KUDOS thing for, I've seen other people mention it.
I'm new to the HP Website.
Thank you,
Peace and Safe Journeys

Cannot open my NEF files in Photoshop CS6 from my new Nikon D800 camera.

That's it, I Cannot open my NEF files in Photoshop CS6 Camera Raw from my new Nikon D800 camera. What am I doing wrong or what is wrong? I have the plug-in Camera Raw 7. and can open TIFF files but not the NEF files.
Peace,
Charles Fennen

Hi ssprengel,
to explain the scenario, i am basically a D7000 user and I do post production with Windows computer. But for an assignment I have hired D800, they have provided me their SD memory card. I have used the same memory card while shooting.
I have transferred the NEF files from the camera using Nikon software. The transfer was successful but i am not able to open the Raw NEF file with ACR. Even my plugins are updated till date.
The NEF thumbnails are having small lock logo in the bottom left corner. I do not know what does that mean. Like this.
Kindly let me know what would be the prob? if my RAW files are corrupted kindly let me know how will I recover them?
Thank you.

New Flip minoHD camera at 60fps. Will PE9 preset work?

Similar Messages

Maybe you are looking for