New Format for e-mail

Totally hate it with a passion. Can only see 4 e-mails at a time But you can Sure see the ADVERTISEMenT S to the left of e-mails Oh that's right you can click on to make it bigger Yea sometimes it works and most time not. WHY WHY WHY did you change it. Maybe it would be better for me to change services Not happy at all. Automatically the check bounces down to the next one to delete or whatever even if your not wanting to. You have to go SLOWER to make sure your not deleting something you want to keep. Who ever got the raise for instituting this needs to lose it. Definitely hate it.

It sounds like you are referring to the "Rich" Interface. This isn't really new, it's been available for months.
If you don't like the Rich interface, you can always switch to the "Basic" Interface and see if you like it better. There should be a link at the top that says "Basic Interface" - Click it and it will switch you. (And don't worry, if you decide you don't like Basic you can switch back to Rich the same way.)
To give you an idea of what the link looks like:
Hope this helps!
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Similar Messages

New Format for creating Attribute Sets.

Hi,
In SAP CRM webclient ui 7.0 there is a new format for creating Attribute Sets. The format is 'value table'.
On selecting Format=Value Table the field 'Table' comes up.
There is a message: Here you can enter a table that contains all the values you want to use. This is particularly useful for attributes with a lot of values or if you want to enter multiple attributes with the same values. The table must be a check table with a search help.
Do I need to create a table with all the fields in in marketing attribute assignment block with search help on attributes field.
Can you please guide as to how I should go about this issue.
Regards,
John.

Hi John,
The Attribute Set of Format type 'Value Table' is for the Mutiple Attribute Sets. These can be either a Single Attribute Set with Multiple values or the Multiple Attribute Sets with One value.
You can include all such marketing attributes into one table which is a check table with search help. and use this as the Value Table.
Hope this helps you out!
Regards
Veena.

NEW FORMAT FOR DISCUSSIONS

does anyone else wish that apple would stop reinventing the wheel and leave a good thing alone?
i used to solve every problem thru the great posts on this site. now i cant find anything.
this new format is the most user unfriendly i have ever experienced. if i have to scroll through one more interminable lists of iphone or itunes topic i am going to scream.
i feel like it's catering to kids now. going to start using macforum or other sites until applegets it together...anyone have this experience? maybe they'll listen to a bunch of us.

amy
Why not narrow the search?
Click on the 'More Options links and you can refine the search to a specific forum, specific, specific poster even.
Regards
TD

New format for USB devices.

I am facing an issue with new USB drives. There is a new standard for windows 8 when usb device in detected as an hard drive and not external driver. Thus SCCM is not able to create a boot media.
I have not done much research on it. I want to see if someone had same issues and got it to work?
Thanks for the help.

Hi,
This is a known issue, best advice, by a cheap USB memory which doesn't present itself as an Hard Drive. There is no good workaround.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Create new folders for e-mail?

Is it possible to create folders for e-mail? Or does this sync with e-mail accounts? I use comcast.net and none of my folders show up on my iPhone. Any info. would be appreciated.

With an IMAP account only and Comcast provides POP account access only.
A POP account is designed to be accessed with a single email client only.
An IMAP account is designed to be accessed with an email client on multiple computers or devices with the ability to keep all server stored mailboxes synchronized with the server automatically with all email clients used to access the account, and the ability to create additional server stored mailboxes to sort/store received or sent messages by category which will also be kept synchronized with the server automatically with all email clients used to access the account.
With an IMAP account, you can also store sent messages on the server. Send a message with the iPhone's Mail client and the message will be available in the account's Sent mailbox automatically when checking the account with the email client used on your computer to access the account, and vice-versa.
This is not possible with a POP account.

Convert payslip to PDF format , for e-mailing to employees

HI with respect to my previous post 'Salary slip delivery thru email'
I have been able to send the email out in the html format. I want the employee to recieve the mail in the PDF format. I would like your assistance on this.
Here is the code.
tables: PV000,
T549Q,
PA0001,
V_T514D,
HRPY_RGDIR,
PA0002,
PA0105.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
P_FORM like PC408 occurs 0 with header line,
P_P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
MY_MONTH type T549Q-PABRP,
STR_MY_MONTH(2) type C,
MY_YEAR type T549Q-PABRJ,
STR_MY_YEAR(4) type C.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
INDEX type I,
end of P_INDEX.
constants:
begin of F__LTYPE, "type of line
CMD like PC408-LTYPE value '/:', "command
TXT like PC408-LTYPE value 's', "textline
end of F__LTYPE.
constants:
begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '<NEW-PAGE>',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
data: OBJBIN like SOLISTI1 occurs 10 with header line,
DOCDATA like SODOCCHGI1,
OBJTXT like SOLISTI1 occurs 10 with header line,
OBJPACK like SOPCKLSTI1 occurs 1 with header line,
RECLIST like SOMLRECI1 occurs 1 with header line,
OBJHEAD like SOLISTI1 occurs 1 with header line.
INITIALIZATION *
initialization.
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
SELECTION SCREEN *
selection-screen begin of block BL1.
parameters: S_ABKRS like PV000-ABKRS obligatory default 'ZA'.
parameters: S_PERMO like T549Q-PABRP obligatory default '02'.
parameters: S_PABRP like T549Q-PABRP obligatory.
parameters: S_PABRJ like T549Q-PABRJ obligatory.
select-options: S_PERNR for PA0001-PERNR.
select-options: S_ORGEH for PA0001-ORGEH.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default
'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
AT SELECTION-SCREEN *
at selection-screen.
if SY-UCOMM ='ONLI'.
if S_PABRP > 24 or S_PABRP < 1.
message E999(YHR) with 'Improper Payroll Period'.
endif.
if S_PABRP > 9.
MY_MONTH = S_PABRP - 10 + 1.
STR_MY_MONTH = MY_MONTH.
MY_YEAR = S_PABRJ + 1.
STR_MY_YEAR = MY_YEAR.
else.
MY_MONTH = S_PABRP + 3.
STR_MY_MONTH = MY_MONTH.
MY_YEAR = S_PABRJ.
STR_MY_YEAR = MY_YEAR.
endif.
modified by Coul
if S_PERMO NE '2'.
message E999(YHR) with 'Improper Payroll Period Parameters'.
endif.
MY_YEAR = S_PABRJ.
STR_MY_YEAR = MY_YEAR.
shift STR_MY_MONTH left deleting leading SPACE.
shift STR_MY_MONTH right deleting trailing SPACE.
translate STR_MY_MONTH using ' 0'.
get payrol period first and last dates _ added by Coul
SELECT SINGLE *
FROM T549Q
WHERE PERMO = S_PERMO "Period param.; 02 = semi-monthly
AND PABRJ = S_PABRJ "Payroll period year
AND PABRP = S_PABRP. "Payroll period no.
W_BEGDA = T549Q-BEGDA.
W_ENDDA = T549Q-ENDDA.
concatenate STR_MY_YEAR STR_MY_MONTH '01' into W_BEGDA.
call function 'HR_HCP_GET_LAST_DAY_OF_MONTH'
exporting
IM_DATE = W_BEGDA
importing
EX_DATE_IS_MONTHEND =
EX_LAST_DAY_OF_MONTH = W_ENDDA.
select PA0001PERNR PA0001ABKRS PA0001~ENAME
into corresponding fields of table ITAB
from PA0001
join PA0000
on PA0000PERNR eq PA0001PERNR
join HRPY_RGDIR
on PA0001PERNR eq HRPY_RGDIRPERNR
where PA0001~PERNR in S_PERNR
where PA0001~ORGEH in S_ORGEH
and PA0001~ABKRS eq S_ABKRS
and PA0000~STAT2 eq '3'
and PA0001~ENDDA ge '99991231'
and PA0001~PLANS ne '99999999'
group by PA0001PERNR PA0001ABKRS PA0001~ENAME.
if SY-SUBRC <> 0.
message E999(YHR) with 'No record(s) found.'.
endif.
endif. "SY-UCOMM ='ONLI'
START-OF-SELECTION *
start-of-selection.
write : / 'Payroll Area : ',S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR.
write : / 'System Date : ', SY-DATUM.
write : / 'System Time : ', SY-UZEIT.
write : / 'User Name : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
clear : P_INFO, P_P_FORM, P_FORM, P_INDEX, P_LIST, OBJBIN,
DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
refresh : P_P_FORM, P_FORM, P_INDEX, P_LIST, OBJBIN,
OBJTXT, OBJPACK, RECLIST.
select single *
from HRPY_RGDIR
where PERNR eq ITAB-PERNR
and FPBEG ge W_BEGDA
and FPEND le W_ENDDA
and SRTZA eq 'A'.
if SY-SUBRC = 0.
call function 'GET_PAYSLIP'
exporting
EMPLOYEE_NUMBER = ITAB-PERNR
SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
PAYSLIP_VARIANT = PAY_VAR
importing
RETURN = RETURN
P_INFO = P_INFO
tables
P_FORM = P_FORM.
check RETURN is initial.
loop at P_FORM
where LINDA eq F__CMD-NEWPAGE
and LTYPE eq F__LTYPE-CMD.
P_INDEX-INDEX = SY-TABIX.
append P_INDEX.
endloop.
P_IDX = 1.
refresh P_P_FORM.
append lines of P_FORM from P_IDX to P_INDEX-INDEX
to P_P_FORM.
P_IDX = P_INDEX-INDEX.
export P_P_FORM to memory id '%%_P_FORM_%%'.
export P_INFO to memory id '%%_P_INFO_%%'.
submit RPCEDT_LIST_TO_MEMORY exporting list
to memory and return.
call function 'LIST_FROM_MEMORY'
tables
LISTOBJECT = P_LIST.
call function 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
tables
IN = P_LIST
OUT = OBJBIN
exceptions
others = 1.
OBJHEAD = 'Objhead'.
append OBJHEAD.
preparing subject
concatenate W_ENDDA(6)
' Payslip-' ITAB-ENAME0(28) '(' ITAB-PERNR4(4) ')'
into DOCDATA-OBJ_DESCR.
DOCDATA-OBJ_NAME = 'Pay Slip'.
DOCDATA-OBJ_LANGU = SY-LANGU.
OBJTXT = 'Pay Slip.'.
append OBJTXT.
OBJTXT = DOCDATA-OBJ_DESCR.
append OBJTXT.
OBJTXT = 'Have a nice day.'.
append OBJTXT.
Write Packing List (Main)
3 has been fixed because OBJTXT has fix three lines
read table OBJTXT index 3.
DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
clear OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = 3.
OBJPACK-DOC_TYPE = 'RAW'.
append OBJPACK.
Create Message Attachment
Write Packing List (Attachment)
ATT_TYPE = 'ALI'.
describe table OBJBIN lines TAB_LINES.
read table OBJBIN index TAB_LINES.
OBJPACK-DOC_SIZE =
( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = ATT_TYPE.
OBJPACK-OBJ_NAME = 'ATTACHMENT'.
OBJPACK-OBJ_DESCR = 'Payslip'.
append OBJPACK.
Create receiver list
refresh RECLIST.
clear RECLIST.
select single *
from PA0105
where PERNR eq ITAB-PERNR
and SUBTY eq 'MAIL'
and SUBTY eq '0001'
and USRID ne ''
and PA0105~ENDDA ge '99991231'.
if SY-SUBRC = 0.
RECLIST-RECEIVER = PA0105-USRID.
translate RECLIST-RECEIVER to lower case.
ITAB-USRID_LONG = RECLIST-RECEIVER.
RECLIST-REC_TYPE = 'U'.
append RECLIST.
Send the document
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
DOCUMENT_DATA = DOCDATA
PUT_IN_OUTBOX = 'X'
PUT_IN_OUTBOX = ''
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
tables
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
CONTENTS_HEX =
OBJECT_PARA =
OBJECT_PARB =
RECEIVERS = RECLIST
exceptions
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
others = 8.
if SY-SUBRC <> 0.
ITAB-MTEXT = 'Message Not Sent to : '.
else.
ITAB-MTEXT = 'Message Sent to : '.
endif.
else.
ITAB-MTEXT = 'Message Not Sent to : '.
endif.
else. "SY-SUBRC Not = 0 HRPY_RGDIR
ITAB-MTEXT = 'Payroll data not found : '.
endif. " end of SY-SUBRC = 0. HRPY_RGDIR
modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
at new MTEXT.
uline.
write : / ITAB-MTEXT color 4 intensified on.
write : / 'Emp. Code' color 2 intensified on,
12 'Emp. Name' color 2 intensified on,
54 'Email ID' color 2 intensified on.
endat.
write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop.

hi,
You can send the list output to spool.
print-on ...
PERFORM REPORT_OUTPUT.
print-off.
From there, you can convert that to pdf.
fm CONVERT_ABAPSPOOLJOB_2_PDF
Getting that pdf conversion done, you can send thE same to mail..
fm SO_NEW_DOCUMENT_ATT_SEND_API1
Regards,
Sailaja.

ALI to RAW format for triggerring mail

Hello all,
i have a requirement wherein i have to send a classical report output to PDF and trigger mail.
Have almost did that using CALL FUNCTION 'SAVE_LIST', CALL FUNCTION 'TABLE_COMPRESS'.
But whenever CALL FUNCTION 'SAVE_LIST' is getting executed the output of this function module is always in
ALI format.
Is there any way to trigger mail using ALI format??Should i have to convert ALI format to OTF or RAW and then only i have to trigger the mail?For this when i used CALL FUNCTION 'SX_OBJECT_CONVERT_ALI_RAW' it gives me error 'Message cannot be processed as it cannot be converted' eventhough in maintainence view it been maintained accordingly for ALI and RAW.
Waiting for your replies.

Hi
Check the OSS Notes 190669, 590126, 211973 and 171698.
Check SAP Connect node for supported formats.
Regards
Raj

This is a problem. The new layout for apple mail in iCloud shows the body of a mail or any attachments on the right half of the screen. But it won't print just the attachment, it prints the whole email page, cutting off the bottom of the attachment.

Even if I try to 'screen shot' just the attachment, the view won't move down as I enlarge the 'screen shot' to get all of the attachment. Previously, I could "SAVE" the attachment and only the attachment would be saved. Now the whole email page including the address info from the top is saved, so when I try to print what should be an 8.5x11 attachment the bottom of it won't print because the top 2" include the email address info.
Suggestions?

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

How can i update my old .cp to the new format for Cap7?

I have over 30 projects that were created with Captivate 4, throught a series of unfortunate events (my system crashed) i lost my old Captivate 4 program. My company just installed the new Captivate 7 on my computer and i cannot access the old projects because of the file extension.
I understand that i need to save them to the new extensions but don't know how to do that. Is it possible to download a free trial of Captivate 6 resave my old projects to the new extensions?
I really don't want to have to redo all of these projects. Any help would be greatly appreciated.
kt

I hope someone of Adobe staff will pop in, because you'll need to have 5 or 5.5 to convert the cp-files to cptx.
Even when that is done, expect to have upgrade problems: AS2 was still supported on CP4, but not in later versions. Question slides can cause quite a lot of issues as well. Sometimes it is quicker to reuse the assets and create from scratch in CP7.
Lilbiri

Gmail new format in Imac mail

Hello All,
In mail on my ipad I can see all my folders.
However recently this view has gone missing on my imac..
So I can see my inbox, but all my other folders, where I want to store things away from my inbox have disappeared.
I dont know if this is a GMAIL thing or an apple mail thing but I am a bit flumoxed.
I know they are there as I can see them in my ipad.
Please help
Thanks
YM18

Provided you have set the account up as IMAP, the folders should be accessible. In the sidebar on the left, do you see the account name (it might just say "Gmail") down below the usual mailboxes? Hover your mouse over it, and if you see the word "Show", click that to see all the server folders.
Matt

How can i make a new map on my mail? The way apple has in the manual doesn't work!

I want to make a new map for my mails, but the way tha apple gives in the manual doesn't work!

If you mean other folders then you need to create them in your email client e.g. in a browser (which you can only do in IMAP accounts, not POP account) - you can't create new folders in the Mail app itself

Getting correct field length when creating formats for delimited flat files

Using Data Services 3.2 to pull in tsv and Excel source files.
When creating a new format for each file, DS tries to intelligently set the field size for each column. However, it seems to sample only a portion of the file. The end result is that it often determines too short a length for a field.
Is there a way to force it to scan an entire file before it sets the field length? Or alternatively, how to get it to at least throw an error instead of silently truncating my data?

I am not aware of any way to force DS to scan the whole file, or to log a warning when it truncates. The field sizes DS sets by using a sample of the data is only really to give you a starting point, you need to try and determine the maximum possible lengths preferably from someone who understands the source of the data or through profiling. But the profiling method will obviously only be based on the data you have at the time of profiling, new data added to the source later could exceed the field lengths. The way I prefer to handle this is to set all the field lengths to longer than expected, eg. varchar(999) and then use a validation transform immediately after reading the file to check for any fields that exceed the maximum allowed for the target system and send these to an error file/table.

Recently downloaded Mavericks to my iMac to replace OS X 10.9.2, everything good except can I revert to the look of "Mail" on Mountain Lion, new format not detailed enough? by Cozzie

Recently downloaded mavericks to my imac, to update OS X 10.9.2., everything went good except would like to revert to the previous format for mail.....new format does not separate inboxes etc. I hear it can be done, any ideas how to do that?

Hi bhcozzie,
Welcome to the Support Communities!
You can change the preferences for Mail in the Viewing tab to Use classic layout if that layout is more familiar to you.
Mail (Mavericks): Viewing preferences
http://support.apple.com/kb/PH14871
Cheers,
- Judy

Set-up custom font, font size, and color for writing new and reply e-mails in Thunderbird

I know that I can select the font, size, and color for writing each new and reply e-mails in Thunderbird, but I don't want to have to do this each time. I want to set-up the default font, size, and color for all new and reply e-mails. It already comes up with a default one, but I want to change it, but can't figure out how to do this. I'm sure it is quite simple, but I don't know how to do this. Thank you in advance for help.

Tools > Options > Display > Formatting tab
Default font: select font
Select size : eg; 14
Click on 'Advanced' button and set all the sizes to 14
Select : 'allow messages to use other fonts'
click on OK
Click on 'Composition'
Under the 'General' tab
Suggest you set HTML font to 'Variable width' and Size : 'Medium'
Select the 'Text colour' you would like to compose email using
Select the 'Background colour' you would like to use when composing emails.
click on OK to save all changes.
This will set the display email list to the selected font.
It will allow received emails to use the font the sender used.
When you compose an email it will also use the same font settings.
The message 'Display' settings in the above section also apply to messages that you compose. The settings are not sent, so they do not affect how your messages appear to recipients.
The settings in the ''Composition' section can affect how messages are sent. If you make unusual choices, then people who receive messages from you might find them difficult or impossible to read. Hence, why I suggest you leave it as 'Variable width' and allow the 'Display' settings to set the default used for composing emails.
More info:
* http://kb.mozillazine.org/Font_settings_in_Thunderbird

Mac mail/creating new format style

Hi all,
I sometimes send emails with a good amount of copy ( I have my compose preference set to RTF). I notice that the default format style for macmail is Left aligned, Spacing 1.0x. (no leading or 'set solid'). I'd like to create a new 'favorite style' that includes the basic type 'Geneva' and flush left alignment but with more leading, maybe '2.0' so that the copy is more readable. I go to the menu Format-->Style-->Styles. A styles info box comes up:
Can anyone tell me how to create a new format style with greater leading than the
default style then add it to favorites? Will a person who receives my email who is using a different email client necessarily receive the formatting I am sending?
I hope I'm not missing something obvious. lol.
Also, if anyone knows the html code that would center my image in this email, please pass that along as well. I tried the <center> tags but they didn't work.
Thanks in advance for any input.
Regards,
Dennis

Replying to myself to add some more information, and ask some additional questions:
Poking around, I have found some information -- a few years old, unfortunately -- that seems to indicate that you cannot create aliases to associate with a mac.com account. What I may have to do is add an address in the primary account, in the Email Address field of the Account Information tab, where she currently has this:
[email protected], [email protected]
If that works, that'll be great, but one flaw in this method is that you can't specify a different sender name. Her customers at "herdomain.com" will still just see her name, Jane Doe, when what she really wants in the sender field for that e-mail address is "Jane Doe, Director, Her Domain Inc."
Can anyone verify if I am finally understanding this correctly? Or if there is something else I can do to get her that alternate identity on her mac.com account?
Thanks.

New Format for e-mail

Similar Messages

Maybe you are looking for