New Formulas don't show under Select Expert --Record

Hello,
       Some how my CR 2008 don't show new formulas in my report when I go in Select Expert-Record, all the formulas show under Field Explorer?? the odd part is that old formulas still showing only new ones don't show is a setup that I'm missing????

The old formulas most likely have the evaluation time function WhileReadingRecords or BeforeReadingRecords referenced in them.
Try adding WhileReadingRecords to your new formulas (If CR can process those formulas at that time) and you should be able to see them in the Record Select Expert.

Similar Messages

  • Lightroom cc updated new features don't show up such as face recognition

    I need help! Lightroom cc updated new features don't show up such as face recognition. What should I do?
    Thanks,

    Have you installed the Lightroom CC program from the creative cloud desktop manager? If you are certain you are running Lightroom CC then face recognition will be on the toolbar in the library module. If you don't see the toolbar then press the letter T.

  • HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

    I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

    Hi were you able to resolve yours?
    I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
    Perform a hard reboot
    Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

  • I updated my Lightroom to ver 5.7.1 and and the new features don't show but it says that 5.7.1 is active. also when I start the program it ask me to update. what is the problem?

    I updated my Lightroom to ver 5.7.1 and and the new features don't show but it says that 5.7.1 is active. also when I start the program it ask me to update. what is the problem?

    because v6.0.1 is the latest...
    and you either have to buy it or you must have subscription to get version 6.

  • Select Expert - Record

    I'm trying to limit the values presented in the Select Expert - Record tab based upon it's relationship to a selected value from another field.
    We have several hospitals.  Each hospital has several floors or unit/wards usually identified as 6 East, 2 West, 4 North, etc.  Not all of the hospitals have the same named unit/wards.
    I select use select expert - table_name.Facility_Name = "Hospital A" when I select table_name.Unit_Name I only want those units/wards from the "Hospital_A" to be displayed in the list and not all of the units/wards that are listed in the table.  This way I do not have to wade through all of the unit/wards that a facility does not have.  The report is for unit/ward.
    Thanks
    Michael

    Hi Michael,
    If you are using Crystal XI or newer version then try creating a cascading prompt to get filtered with parent level field value.
    For more information check the sample report prompting.rpt that shows the cascading prompt of Country>Region>city
    Regards,
    Raghavendra

  • Select Expert Record. Last 6 months and week start date on Monday

    Hello,
    i am trying to use the select expert record to grab the last 6 months worth of data. I require the week start day to be a monday and end on a sunday.
    Can someone please provide some advice the best way to do this
    kind regards
    david

    Hello Abhilash,
    Once again thanks for your reply.
    Yes this is correct, when it goes back 6 months i need it to skip the days prior and begin on a monday as we are reporting on a mon-sunday basis.
    I have tried your formula Date field >= dateadd('m',-6,currentdate) and it seems to grab 6 months of data, but the group weeks are not grouping from Monday to Sunday...
    kind regards
    david
    Edited by: davitali on Dec 2, 2011 9:35 AM

  • New Photos Don't Show On My Apple TV -- Is There a limit? An "Update" button? ...?

    I have my Apple TV 2nd gen set so that after two minutes is shows photos from my computer as screensaver.
    I have an album in iPhoto where I drag the photos I want and I've told the Apple TV to pick up those photos.  Has always worked fine.
    Recently I added some pictures to that album but they don't show on the Apple TV -- just the previous photos are on display.  Is there a limit?  There are 94 photos in that album.  Have I forgotten some sort of "update" button? ...
    All the settings both on the Apple TV and my iTunes look fine and I recently ran whatever update Apple wanted me to (I had this photo hiccup both before and after that upgrade so that ain't it).
    Any suggestions?
    Thanks

    Possible iTunes issue:
    Try the following after adding photos.
    Go to file
    Then Home Sharing
    Select photos to share
    Click on All Photos already selected Do anyway
    When Apply turns black click on Apply
    Now go to Apple TV to see if photos there
    Or restart iTunes.
    Works for me every time photos do not appear on my Apple TV 3
    Hopefully will work for you.

  • Report Painter - New Columns Don't Show Up

    Hello All,
    We have a report painter report that was copied from an existing report in transaction CJE5 (for modifying the form) and then assigned in CJE1 (to a report). The copied report was functioning properly with an existing tcode assignment. Now, I am trying to add new columns to the same form and I was able to add and save everything to the form without errors. However, when I execute the report, these new columns don't appear on the report. Can anyone suggest why?
    One thing I notice was that when I went to the "Report Parameters", the list of "Columns" does not include the columns that I added. I cannot figure out how to add them to the list so that they would start appearing on the report output.

    Hello Suresh, Thanks for the suggestion, but report painter is a functional area and the ABAPer should not be required to insert a new column and make it appear on the report. Any more suggestions, please?

  • Crystal Rpt XI - Select Expert record limits

    Newbie here - please be gentle
    There appears to be @ a 500 record limit that can be used in the formula editor. Is there a way to work around this limit or is it greater in later versions?
    Example;
    {Mrpa99.Pat_Ext_ID} in ["0001400126", "0001401652", "0001402718", "0001402742",......... , "0001665341"]
    would return 'TOO MANY RECORDS' if I had all my desired record sets (@ 700), but if I removed half it would work fine.
    If there is no way to get all values in a single report is there a way to merge the results into a single report.
    Thanks in advance,
    Cj

    First try to push down this filter to DB level if possible, this will improve your report performance.
    Try creating 2 or more formulas that contain those long string separately.
    and write below codes in your select expert: {Mrpa99.Pat_Ext_ID} in formula1 or in formula2 or in ...formulaN.
    Thx, Hao

  • Filenames don't show under thumbnails

    cs 5
    mac os 10.6.7
    no updates avail for either cs5 or the mac os x.
    this was working fine till today.  then poof - no file names -- they show up if i highlight a thumbnail - in the left side selection picture, and in the meta data area etc -- but the text and rating etc under the thumbnails of the main area are gone.  i have tried different drives (to see if maybe 1 cache was corrupt)... and restarted both bridge and the mac... i checked all the prefs and the view settings - nothing that i see to turn off filenames / ratings. i also made sure the theme was not changed.
    any help would be appreciated.
    thanks
    ciara

    i checked all the prefs and the view settings - nothing that i see to turn off filenames / ratings.
    yet it is in the view settings, although not very clear
    Deselect the option show only thumbnail only or hit cmd+T.
    You probably hit the shortcut cmd + T before by accident. Your not the first and probably not the last either to have done so...

  • 10g Bug: new attributes don't show up until restart JDev

    When I edit my Offline Database Objects and my Java classes to add new attributes, the new fields show up in the TopLink mapping screens, but the new attribute is not available for mapping until I exit JDeveloper and restart it.

    Hey there Pentrikin,
    It sounds like you are unable to see any new apps you install until after you restart the device. I would start by quitting all the running apps on the device:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that and restart the phone again and test the issue and let me know how it goes:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • New icons don't show

    I recently had trouble with my G4 booting up and was told to use the start up disk to run the disk utility. I did that and it fixed the problem. However, I think it created a new one. I plugged in my digital today and the icon drive didn't come up enabling me to download the pictures. I thought it might be a cable problem, but I put a disk into the zip drive and it's icon didn't show up so I could not access it? Any answers?
    Thanks, Pat

    Hi
    This may be a silly question, but are you referring to the icons on the main desktop (rather than a Finder window side bar) ? It may be worth checking the Finder preferences (Finder menu -> Preferences... option) to see whether the 'Show these items on the Desktop' options are still set correctly.

  • New files don't show

    Hello,
    I'm hoping someone can help me.
    I've just had my macbook in for repairs, and they told me the motherboard needed replacing etc.
    Anyway, I got it back today and everything seems fine except one small thing.
    When I download a new file to my desktop or anywhere else for that matter it doesn't show up. If I search for it in spotlight it will find the files where they should be, or if I try to open the file through a prog. it can also see it, but that is the only way. I have also gone into the info and clicked "show extension" and that seems to work, but only for that individual file and not all of the invisible files as a whole.
    Any idea what's happening and how I can fix it so that new files I add to my machine show up?
    Many Thanks,
    Jenn

    hi
    open utilities--terminal.app
    type:
    cd desktop <enter>
    rm -rf .DS_store <enter>
    quit terminal.app
    logou/login
    try again

  • Digital Editions 2.0 on two computers but new books don't show

    I just installed Digital Editions 2.0.1 on my PC.  I had already installed 2.0 on my notebook.  I then downloaded some e-books using the PC.  These new books do not appear on my notebook version of Digital Editions.  How do I get the two co-ordinated?

    Sorry, ADE 3.0  cannot sync books over the cloud. You have to transfer the books from one laptop to other via some storage device or through mail.

  • Uploaded music titles from my computer, but the titles don't show under musik

    unfortunately i still use windows xp (service pack 3) and not windows 7. therefore i can't use the icloud, if i understood the instructions correctly. so i tried to upload my music from my computer to itunes, but it somehow didn't work. can anybody help me. i'm sure i did something wrong but can't find any help under the itunes help. thanks in advance.

    thank you so much. i did exactly what you recommended and now it works! got my iphone 5 today so i am a total newbie... and to make things worse i'm german and everything on the iphone is in german. but i found it. absolutely happy now!!!!!

Maybe you are looking for