New Found Hardware Wizard on Windows XP Pro SP3

hi, can anyone help???
had iphone connecting fine on desktop with Vista, I rebooted yesterday with XP Pro SP3 (fed up with Vista hogging all memory)
Installed and opened itunes and connected iphone and got a "new found hardware wizard" that attempted to find device drivers to no avail, iphone will light up with a yellow ! in device manager for as long as the phone is switched on, as soon as it goes to standby the device manager loses it.
Have tried various USB ports (all 2.0) and have succesfully opened other USB devices plug and play including my ipod video, but for some reason XP pro sp3 and iphone 3G dont want to talk????
Any suggestions?

Make sure you have the latest iTunes version installed, but at least 7.7. Better yet, reinstall 7.7.1 to be on the safe side.
Also make sure your XP installation is fully patched with the latest fixes for SP3.
If that does not help, consider reinstalling XP, but only SP2, which seems to have no issue with iphone 3G.
XP SP3 tends to be a bit troublesome with certain hardware combinations, but it's a bit hard to say what exactly makes it act up.

Similar Messages

  • Satellite A60 new found hardware wizzard problems

    Hi i am the owner of a Satellite a60 laptop i have recently formated my hard drive with windows xp since i have done this i have encountred problems with the new found hardware wizzard.on trying to install software for my i-pod and bt voyager 1065 wireless laptop adapter i recieve the following message "new found hardware wizzard cannot install this hardware the hardware was not installed because the wizard can not find the necessary software" this occurs even when the software cd is in the drive could you possibly tell me what could be causing this could it possibly be a missing driver?

    Hi
    Unfortunately I didnt try to configure i-pod yet but try to activate option to check the CD directly or check if maybe some setup.exe file is available on the CDs and must be installed before you connect external devices.

  • Unable to fully sync with iPod Touch 1G and the (new/lat)est iTunes versions in a very old Windows XP Pro SP3 machine?

    Hi.
    I keep getting this "The iPod '...' cannot be synced. The disk is locked and cannot be written to." error when I try to sync my 11 GB of music from my very old, updated Windows XP Pro SP3 machine to an old iPod Touch 1G (iOS v3.1.3). It has a brand new (lat/new)est iTunes installations too. I tried rebooting the the machine, disconnecting USB cables, etc. None of them helped. I did not have this problem in the end of 2013.
    "Attempting to copy to the disk '...' failed. The device timed out."
    "The iPod '...' cannot be synched. An internal device error occurred."
    Sometimes Windows XP Pro SP3 thinks my USB connection is not fast? Huh?
    No problems when I synched almost 8 GB of music to an iPod Nano 6G from the same machine and USB connector and port. Same collection, and random songs.
    I tried again on a borrowed old 15" MacBook Pro (mid-2008) with Mac OS X 10.5.8 and iTunes v10.6.3. Synced from its local HDD to it without any problems.
    So, I had an idea. I retried with iTunes v11.1.3.8, that I used end of 2013, in the same Windows XP Pro SP3 machine from scratch. It worked like the end of last year! No errors! Wow! :O
    OK, so what changed in iTunes after its v11.1.3.8 to cause this problem?
    Thank you in advance.

    b noir wrote:
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)
    I only see mdnsDSP from Apple in my WinSock Provider tabs in AutoRuns v11.70. I do remember I had a low memory error during a very long synchronization, but that only happened once. I doubt that is related to creating a new account especially after I rebooted my very old Windows XP Pro. SP3 machine.

  • Migrating application from Windows 2000 to Windows XP Pro SP3

    I just got a new computer with Windows XP Pro SP3 installed and need an application that was installed on my old, really old, computer running Windows 2000. The application was developed by a third party in 1997 and uses Oracle as the database engine. It uses Developer 2000 for the interface. Our IT person, who is lightyears ahead of anyone I've ever known when it comes to hardware and software, could not get the application to run on my new computer. We get error FRM-40039 when we try to open the application. Any suggestions would be appreciated. I use this application intermittantly all day and right now the "solution" is for me to go to my old computer to use it. This would be like an editor trying to use a dictionary located in another room from which it could not be removed (and could not consult the internet).

    FRM-40039 is a Forms error, and Forms doesnt use ODBC. You'll probably get better help posting in the forum appropriate for that product. Unfortunately I'm not sure exactly what the forum is :(
    Greg

  • Can I get Cisco Jabber 10.6.0 to work on Windows XP Pro SP3?

    We are implementing the new Cisco Jabber 10.6.0, per a requirement, but we still have some Windows XP Pro SP3 users. The issue is that with this new client the app will not load due to error:  CiscoJabber.exe Entry Point Not Found: the procedure entry point inet_ntop could not be located in the dynamic link library ws2_32.dll.
    I understand Windows XP is "not supported", but since we are forced to upgrade to this version I was hoping for a work around for our Windows XP users until they can upgrade to Windows 7.
    Anyone have a solution?
    Thanks for your time.

    Thank you for the suggestion. Here is what I did:
    Uninstalled 10.6
    Removed all folders and file traces of the install
    Tried to install 9.6 - got hung up during install so had to reboot
    Tried right-click on exe / uninstall and got message it was only used if installed, so it never really installed even thou I had a broken link to jabber on the desktop
    Tried install again. Second attempt was same thing. It gets hung on the windows installer - preparing to install... had to reboot again
    Right-click exe / repair and got message it was only used if installed
    Removed all folders and file traces of the install
    Redownloaded the exe
    Same issue, will not install. Hang right after registering product completes.
    So i'll be looking into why this is not installing now. :)

  • Anti-virus software on Windows XP pro sp3 with Virtual PC

    Hi,
    I'm running Virtual PC 7.0.3 with Windows XP pro Sp3 on eMac. Has anyone found the need to run a anti-virus software etc as part of the Windows system? Or will the firewall on the broadband router modem be sufficient protection?
    Many thanks.

    Thanks for the reply.
    Any recommendations on AV software?
    I tried installing a free version of AVG AV but the install would not complete, I ended the process after 1.5 hours.

  • I can't install ANY AIR-based App in Windows XP Pro SP3

    Here is the problem: I have AIR 1.5.1.8210, but any AIR apps can't be installed and when I try it the OS crashes and I have my computer restarted. It's very weird 'cause it's heppen only with AIR apps.
    Yes, this is my last resource to find an answer to it.
    Yes, I've done my homework and yes, I've done some research (and still doing it)
    Yes, I'm using my administrator account logged on with password (so, I think, apps has no problem to install)
    Yes, I tried install it with another user account I thought the app will ask the admin password (just like in Linux OS, when the app on installation ask you about the root password). Even though, no success. Of course, it's something expected 'cause the user hasn't admin permissions. But I give a shot.
    Yes, I've already installed/installed about 5 times AIR runtime and the AIR apps (even manually) and no success...at all!
    Yes, I used at least 4 apps to system/registry/file cleaning (CCleaner, Glary Utilities, Advanced System Care  and MVRegClean)...too many of them, but only to be sure of the complete cleaning.
      Here in the forum another person, but on Vista, found almost the same problem as I, here's the link: http://forums.adobe.com/thread/199842?tstart=30
      And another buddy ask about admin rights to install AIR apps, here's the link: http://forums.adobe.com/thread/415756?tstart=30
      And, I found two others infos in Adobe site per se about any troubleshooting on AIR: http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403150&sliceId=1 and log actions during installation: http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403123&sliceId=1.
    2+2 = 4. So, I done/undone all the steps in the last two links (I installed/unistalled the AIR runtime and AIR apps 5 times, remember?) Usually, I can handle my own problems in computer, but this one I can't figure it out.
    After all of this here's my system specifications: AMD Athlon 64 X2 Dual Core 3600+ (2.01Ghz), Windows XP Pro SP3 (32bits), Nvidia GeForce 7100 (512 Mb), 1.5 Gb RAM. Web browser: Mozilla Firefox 3.0.8 with TwitterFox.
    So, could anyone help? I know, I know to mucj information, burt it was to facilitate the conversation, believe me.
    Kisses, Cat777.

    Well, well, well, right before somenone could answer me. I found the answer just here in the forum. I really love it!!!
      Seems to be a incompatibility with the file created on Folder Lock installation: "windrvnt.sys." In this case, it is just uninstall Folder Lock and tah dah! Everything works perfectly.
      Here comes my request: Hey, developers you all could give a try in resolve this issue, huh? At least give a try...It'll be very nice have the two programs properly installed in anybody's (who wants it) system.
      Thanks, anyway for this space to research, change some infos even undirectly. If it was not this forum and all the debate in here maybe I'll be in the dark search for the resolution of it.
      Thanks.

  • Problem installing NW2004s ABAP Trial version on windows xp pro SP3

    Good Day.
    I have drawbacks installing Abap Trial SP12. When it comes to 89% ends abruptly.
    I set up MS Loopback Adapter. The operating system is Windows XP Professional SP3. 1Gb RAM. Disk Space 50Gb Free.
    I have installed thousand and once and presents the same mistake. I have followed the procedure to uninstall the MaxDB, Stop service SAP, Clear Folders installed and clean record with RegCleanTool. And nothing, I am grateful for the help they can give me.
    Thank you.
    (May 27, 2008 7:13:42 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
    (May 27, 2008 7:13:42 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.execute(StepWrapperInstallFiles.java:2 54)
    at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllSteps(StepWrapperInstallFile s.java:224)
    at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllInstallationSteps(StepWrappe rInstallFiles.java:177)
    at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.install(StepWrapperInstallFiles.java:2 68)
    at com.installshield.product.service.product.PureJava ProductServiceImpl.installProductAction(Unknown Source)
    at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.getResultForProd uctAction(Unknown Source)
    at com.installshield.product.service.product.Installa bleObjectVisitor.visitComponent(Unknown Source)
    at com.installshield.product.service.product.Installa bleObjectVisitor.visitInstallableComponents(Unknow n Source)
    at com.installshield.product.service.product.Installa bleObjectVisitor.visitProductBeans(Unknown Source)
    at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.install(Unknown Source)
    at com.installshield.product.service.product.PureJava ProductServiceImpl$Installer.execute(Unknown Source)
    at com.installshield.wizard.service.AsynchronousOpera tion.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    (May 27, 2008 7:18:44 PM), Install, com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAP\NSP\log.txt for details.
    (May 27, 2008 7:18:44 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.execute(StepWrapperInstallFiles.java:2 54)
    at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllSteps(StepWrapperInstallFile s.java:224)
    at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllUninstallationSteps(StepWrap perInstallFiles.java:192)
    at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.uninstall(StepWrapperInstallFiles.java :313)
    at com.installshield.product.service.product.PureJava ProductServiceImpl.uninstallProductAction(Unknown Source)
    at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.processActionsFa iled(Unknown Source)
    at com.installshield.product.service.product.Installa bleObjectVisitor.visitComponent(Unknown Source)
    at com.installshield.product.service.product.Installa bleObjectVisitor.visitInstallableComponents(Unknow n Source)
    at com.installshield.product.service.product.Installa bleObjectVisitor.visitProductBeans(Unknown Source)
    at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.install(Unknown Source)
    at com.installshield.product.service.product.PureJava ProductServiceImpl$Installer.execute(Unknown Source)
    at com.installshield.wizard.service.AsynchronousOpera tion.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)

    Problem solved.
    I had installed.
    - Windows XP Pro SP3
    - Java Runtime 1.6
    The uninstall and install the following.
    - Windows XP Pro SP2
    - Java Runtime 1.5
    Thanks.

  • IMac 24inch - Boot Camp and Windows XP Pro SP3 - ZERO Audio

    I've just used Boot Camp to install a fresh copy of Windows XP Pro SP3 onto my 24-inch, 2.4 gHz iMac.
    Everything seems OK, except there is ZERO audio.
    I've tried reinstalling drivers from RealTek, to no avail. I've downloaded RealTek's latest drivers (number 217) and they appear to install, but nothing works.
    My Device Manager does not show any sort of Audio card whatsoever. Have I got some sort of hardware problem? (Audio works without trouble in OS X.) Why can't Windows find my Audio Card at all?

    I also have the same problem. I installed the Bootcamp update for XP and then my audio does not work with XP anymore. It does work with Leopard still without a problem. I noticed that when I am in windows, and I turn the audio off of mute, there is a red light that illuminates from the Audio Jack. The Audio driver does show up on my control panel, but nothing is working. Is this a way to make us stop using windows?

  • Airport Extreme and connecting through ethernet port to Windows XP Pro SP3

    I have today had the sad experience to loose network connection to My Windows XP Pro SP3 using the ethernet port on Airport Extreme Base station, the newest one.
    It seems it won't pass an IP address for XP using DHCP, and to make things worse My wireless access using My is working okay!!!
    Why do I only have this problem through ethernet ports on the Airport Extreme Base Station for XP, but wireless connectivity for My Mac's works????
    If others have similar problems and have found a solution please let Me know.
    Yes, I have twice today contacted My ISP provider but as the Mac's can connect the problem seems to lie with the Airport Extreme Base Station.
    I will check this forum tomorrow and hopefully a response has been given to solve My problem
    Kind regards
    Engineer
    Preben Duus
    Denmark, Europe

    You can access the AirPort Disk via normal file-sharing connection options, such as selecting the server from any Finder window’s sidebar in the Shared section. AirPort Disk uses two standard methods: AFP (for Macs) and Samba (for Windows or Linux).
    Leopard accesses AirPort Disks through the Finder, just like any other network volume. Open any Finder window, and look in the sidebar for a list of servers in the Shared section. You should find your AEBSn.
    To mount an AirPort Disk volume, follow these steps:
    1. Select the AEBSn in the Sharing section of the sidebar.
    2. To connect as a Guest user, you need take no more steps; To use a named account, click the Connect As button in the upper right and enter your credentials.
    3. Double click a volume that’s shown to mount it on your system.
    For both Windows XP and Vista, open the network browser by double-clicking Network on the Desktop. The base station name should appear in the Network browser.

  • Adobe Reader X wont open in Windows XP Pro Sp3

    I have uninstalled every adobe product on my PC which is running Windows XP Pro SP3, then downloaded Adobe Reader X again and reinstalled it.
    Adobe reader X simply wont open - generates the "Adobe Reader has encountered a problem and needs to close.  We are sorry for the inconvenience" message.

    Announcement: Would you like to help us improve Adobe Reader?
    Hi All,
    We have had a few bug reports related to Adobe Reader X protected mode coming in from you in this forum. We have addressed a large number of them in our upcoming Reader update and we would like to hear your feedback.
    To that extent, we would like to invite you to the Adobe Reader Prerelease program and try out the latest build. To participate, please fill in the form available athttps://www.adobe.com/cfusion/mmform/index.cfm?name=reader_prerelease_ interest and indicate Adobe Reader as the product of your interest.
    We look forward to your active participation, feedback and help towards making Reader a better product.
    Thanks and regards,
    Adobe Prerelease Team

  • Acrobat 7.0.5 Compatible with Windows XP Pro SP3?

    I need to know if Acrobat v7.0.5 is combatible with Windows XP Pro SP3.
    Thank you.

    I don't know, but you may go to the download page and click the individual links to read the notes for that link
    http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
    BTW - There are several updates after 7.0.5 which you should install, and NOTE that the latest, 7.1.0 is at the bottom of the 7x section

  • Adobe Reader v8.1.2 Compatible with Windows XP Pro SP3

    I need to know if Adobe Reader v8.1.2 is compatible with Windows XP Pro SP3.
    Thank you.

    I've been using Reader without any problems until yesterday when administrator installed Windows XP SP3. When I do a <Ctrl-P> to print, it takes about 30 to 90 seconds for the print requester to pop up. The program is locked up and not responding during the delay, although it does NOT say "Not Responding" in the title bar.<br /><br />While the delay is going, the SysInternals Process Explorer shows but fleeting milliseconds of Kernel or User time being used. Setting the priority from 8 to 13 made no improvement at all.<br /><br />I frequently print from the Reader and the delay drives me nuts! This hang-up needs to be corrected ASAP.<br /><br />I am sure it is a Reader incompatibility because it never happened before the SP3 update, the program is hung and doing nothing and everything works perfectly before and after the <Ctrl-P> is entered.<br /><br />Word or Excel do not experience similar problems. I just tried Notepad, and it sometimes hangs the same way but not nearly as long - maybe 10 seconds at the most and only the first time. After the first delay it pops right up. Adobe Reader hangs a long time every time.<br /><br />Any idea if Adobe is going to fix it or even knows the problem exists? Do they moderate or monitor complaints like this here or elsewhere?<br /><br />I don't want to think they know about it and are fixing it if they aren't.

  • MiniSAP under windows XP pro sp3

    Hi all
    I have installed a NSP minisap on a virtual PC (Windows XP Pro SP3) but each time I start the Sap server after one minute (server is yellow status) I have a Windows Error generated my the process msg_server....
    I checked every prerequisites, and It should work.
    Thanks for your help
    Jerome

    I know.... The user used was not with the right authorization on windows, then the register wasn't correctly updated by SAP installation (and no error message for this stuff )
    Thanks for your help !

  • DVD/CD unit not found after installation of Windows 8 PRO

    After installing Windows 8 PRO I cannot play a dvd. The trouble seeker says: The hardware can not start due to damaged or incomplete config info in the register (code 19).
    When searching for a new driver I'm told that I have the latest one. I read on Microsoft support that a similar problem occured on installing Vista, but the solution should not be applied on this installation.
    What else is to do about this problem?

    > After installing Windows 8 PRO I cannot play a dvd. The trouble seeker says: The hardware can not start due to damaged or incomplete config info in the register (code 19).
    If you would use the Toshiba forums Advantage search option, then you would find this info:
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletinDetail.jsp?pf=true&soid=3516888
    +If the TOSHIBA Recovery Media Creator or TOSHIBA Disc Creator are installed on the HDD, there might be a issue between Win 8 and mentioned software+
    +So uninstall these tools, then restart your PC using the Power-->Restart option in Windows 8. Your CD/DVD should be accessible now.+

Maybe you are looking for