New functionality in ECC 6.0 and problems during sap implementation

Dear Gurus,
may i know the details of the New functionality in ECC 6.0 on (MM,SD,PP,QM,PS,HR,PM,FI/CO,BI,XI,DMS ) or what is the problems coming at the time of implementation of ECC 6.0.
THANKS AND REGARDS
RS

Ritesh,
Question is bit confusing
may i know the details of the New functionality in ECC 6.0 on (MM,SD,PP,QM,PS,HR,PM,FI/CO,BI,XI,DMS )
That means you are going to upgarde from some earlier version .what is that version ?
Then you might find some specific information at
https://websmp102.sap-ag.de/uda -
>Upgrade Dependency Analyzer
what is the problems coming at the time of *implementation* of ECC 6.0.
If its a new implemenation you will  not face problem , but you need to configure everything accordingly.
Problem depends upon what all you are using from standard and customizing.
Above provided link will help you.
Just add up
http://wiki.sdn.sap.com/wiki/display/ERPLO/NewfunctionalityinECC6.0%28+MM%29
Regards,

Similar Messages

  • New functionality in ECC 6.0 with Enhancement Package 3

    Hi Experts,
    Can any one tell me what new functionality is added in Enhancement package 3 (ECC 6.0)?
    Thanks & Regards,
    Simar

    Hi,
    There no new functionality in ECC 6.0 for auto clearing of bank clearing account. Still you need to depend on Manual / Electronic bank statement to clear them.
    Thanks
    Prasada

  • New functionality in ECC 6.0 for auto clearing of bank clearing account.

    Is there any new functionality in ECC 6.0 for auto clearing of bank clearing account.
    Regards,
    Kishore

    Hi,
    There no new functionality in ECC 6.0 for auto clearing of bank clearing account. Still you need to depend on Manual / Electronic bank statement to clear them.
    Thanks
    Prasada

  • New Functionality in ECC 6.0

    Hi All,
    Can any one guide me about the new functionality of "Work Center for Purchasing Documents" in ECC 6.0?
    Regards
    Edited by: sapsarang on Jan 12, 2011 7:15 AM

    Hi Sarang
    Please refer the release notes with the following link
    http://erp.fmpmedia.com/Default.aspx?alias=erp.fmpmedia.com/english
    Here you select
    Source release version as SAP ERP 6.0
    Target Release Version as SAP enhancement package 4 for SAP ERP
    Solution Area as Procurement and Logistics Execution
    Then click search
    You find Release availiable and delta functionality
    On Page 4 you find Work center for purchasing documents
    Cheers
    Kris
    Edited by: KRISHNA AKULA on Jan 12, 2011 8:23 AM

  • SAP Roles and Access for SAP Implementation team members

    Hi,
    Is it correct practice to give SAP_ALL role access for all SAP Implementation team members in Dev and QA?
    If not, what is the correct practice?
    Kindly let me know

    Madhu,
    It is NOT correct practice to give anyone SAP_ALL in any of the systems; not DEV, not QAS, and certainly not PRD. However, many implementation teams (and particularly consultants from SIs) insist that they cannot possibly do their jobs without it. This is completely incorrect as there are specific roles for them to use for that purpose. The only circumstance where it could be justified is if you require a special "firefighter" role - and even then, I would still be a bit doubtful.
    You should also consider that once you have given someone SAP_ALL, they will fight tooth and nail to keep it. It also means that they probably are not testing the user roles correctly. Most of those that insist they need it simply do not understand the security issues and probably don't care.
    Just think; if they have access to do soemthing that they shouldn't and then cause a big problem, are they the ones that will have to fix it or are they going to expect you to do it? If they expect you to clear up after them, then you have the right to insist on restricting their access to cause issues in the first place.
    But I know just how demanding they can be....
    Best of luck
    Tony

  • Problem during SAP Solution Manager Migration - create secure store

    Hi all,
    I have a problem during a migration of my SAP SOLUTION MANAGEER from Linux ORACLE to AIX 6.1 ORACLE 10.2.0.4
    Release SOLUTION MANAGER 4.0 KERNEL 700
    I have done the export of the database and now i start with the import.
    SAPINST stopped at Create Secure Store phase and this is the log of SercureStoreCreate.log file.
    Unhandled exception
    Type=Segmentation error vmState=0x00000000
    J9Generic_Signal_Number=00000004 Signal_Number=0000000b Error_Value=00000000 Signal_Code=00000033
    Handler1=09001000A1271B80 Handler2=09001000A1269C20
    R0=0000000000000000 R1=0FFFFFFFFFFFD460 R2=0000000000000010 R3=0000000000000010
    R4=000000000000000B R5=09000000089B70A0 R6=0000000111BBE829 R7=0000000000000018
    R8=0000000111C23D58 R9=000000003A470000 R10=0000000111B99CB8 R11=09000000089CD638
    R12=0900000008970594 R13=000000011000D0C0 R14=0000000111BBE7B8 R15=0000000110096400
    R16=00000001110EC8B0 R17=0000000111C23FD8 R18=09001000A12753A8 R19=0000000000000013
    R20=0000000111C23FB8 R21=0000000111BBE848 R22=0000000110096480 R23=0000000000000000
    R24=0000000000000000 R25=0000000110001098 R26=0000000110096400 R27=0000000110016870
    R28=0000000000000000 R29=07000000001DD260 R30=000000000000000B R31=0000000000000010
    IAR=09000000089CD638 LR=00000001108BB6C0 MSR=A00000000000D032 CTR=09000000089CD638
    CR=4222422420000004 FPSCR=8202200000000000 XER=2000000482022000
    FPR0 3fe8000000000000 (f: 0.000000, d: 7.500000e-01)
    FPR1 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR2 3fe8000000000000 (f: 0.000000, d: 7.500000e-01)
    FPR3 4530000000000000 (f: 0.000000, d: 1.934281e+25)
    FPR4 4330000000400000 (f: 4194304.000000, d: 4.503600e+15)
    FPR5 4330000000000000 (f: 0.000000, d: 4.503600e+15)
    FPR6 3fb9999999999999 (f: 2576980480.000000, d: 1.000000e-01)
    FPR7 3c63333333333333 (f: 858993472.000000, d: 8.326673e-18)
    FPR8 0000000082024000 (f: 2181185536.000000, d: 1.077649e-314)
    FPR9 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR10 4330000000000000 (f: 0.000000, d: 4.503600e+15)
    FPR11 4077f00000000000 (f: 0.000000, d: 3.830000e+02)
    FPR12 3fe8000000000000 (f: 0.000000, d: 7.500000e-01)
    FPR13 4071f40000000000 (f: 0.000000, d: 2.872500e+02)
    FPR14 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR15 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR16 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR17 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR18 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR19 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR20 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR21 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR22 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR23 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR24 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR25 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR26 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR27 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR28 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR29 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR30 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR31 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    Module=/usr/java14_64/jre/bin/libj9jit23.so
    Module_base_address=0900000008998000
    Target=2_30_20070530_12820_BHdSMr (AIX 6.1)
    CPU=ppc64 (4 logical CPUs) (0x80000000 RAM)
    JVMDUMP006I Processing Dump Event "gpf", detail "" - Please Wait.
    JVMDUMP007I JVM Requesting System Dump using '/tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/core.20110907.081216.6947032.dmp'
    JVMDUMP010I System Dump written to /tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/core.20110907.081216.6947032.dmp
    JVMDUMP007I JVM Requesting Snap Dump using '/tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/Snap0002.20110907.081216.6947032.trc'
    JVMDUMP010I Snap Dump written to /tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/Snap0002.20110907.081216.6947032.trc
    JVMDUMP007I JVM Requesting Java Dump using '/tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/javacore.20110907.081216.6947032.txt'
    JVMDUMP010I Java Dump written to /tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/javacore.20110907.081216.6947032.txt
    JVMDUMP013I Processed Dump Event "gpf", detail "".
    Could please help me for finishing the migration?
    Thanks in advance
    Andrea

    Hi,
    this is the a part of sapinst.log:
    ERROR 2011-09-07 10:12:18.24
    FCO-00011  The step createSecureStore with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR ( Last error reported by the step :Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log:
    Unhandled exception
    Type=Segmentation error vmState=0x00000000
    J9Generic_Signal_Number=00000004 Signal_Number=0000000b Error_Value=00000000 Signal_Code=00000033
    Handler1=09001000A1271B80 Handler2=09001000A1269C20
    R0=0000000000000000 R1=0FFFFFFFFFFFD460 R2=0000000000000010 R3=0000000000000010
    R4=000000000000000B R5=09000000089B70A0 R6=0000000111BBE829 R7=0000000000000018
    R8=0000000111C23D58 R9=000000003A470000 R10=0000000111B99CB8 R11=09000000089CD638
    R12=0900000008970594 R13=000000011000D0C0 R14=0000000111BBE7B8 R15=0000000110096400
    R16=00000001110EC8B0 R17=0000000111C23FD8 R18=09001000A12753A8 R19=0000000000000013
    R20=0000000111C23FB8 R21=0000000111BBE848 R22=0000000110096480 R23=0000000000000000
    R24=0000000000000000 R25=0000000110001098 R26=0000000110096400 R27=0000000110016870
    R28=0000000000000000 R29=07000000001DD260 R30=000000000000000B R31=0000000000000010
    IAR=09000000089CD638 LR=00000001108BB6C0 MSR=A00000000000D032 CTR=09000000089CD638
    CR=4222422420000004 FPSCR=8202200000000000 XER=2000000482022000
    FPR0 3fe8000000000000 (f: 0.000000, d: 7.500000e-01)
    FPR1 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR2 3fe8000000000000 (f: 0.000000, d: 7.500000e-01)
    FPR3 4530000000000000 (f: 0.000000, d: 1.934281e+25)
    FPR4 4330000000400000 (f: 4194304.000000, d: 4.503600e+15)
    FPR5 4330000000000000 (f: 0.000000, d: 4.503600e+15)
    FPR6 3fb9999999999999 (f: 2576980480.000000, d: 1.000000e-01)
    FPR7 3c63333333333333 (f: 858993472.000000, d: 8.326673e-18)
    FPR8 0000000082024000 (f: 2181185536.000000, d: 1.077649e-314)
    FPR9 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR10 4330000000000000 (f: 0.000000, d: 4.503600e+15)
    FPR11 4077f00000000000 (f: 0.000000, d: 3.830000e+02)
    FPR12 3fe8000000000000 (f: 0.000000, d: 7.500000e-01)
    FPR13 4071f40000000000 (f: 0.000000, d: 2.872500e+02)
    FPR14 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR15 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR16 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR17 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR18 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR19 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR20 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR21 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR22 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR23 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR24 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR25 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR26 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR27 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR28 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR29 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR30 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    FPR31 0000000000000000 (f: 0.000000, d: 0.000000e+00)
    Module=/usr/java14_64/jre/bin/libj9jit23.so
    Module_base_address=0900000008998000
    Target=2_30_20070530_12820_BHdSMr (AIX 6.1)
    CPU=ppc64 (4 logical CPUs) (0x80000000 RAM)
    JVMDUMP006I Processing Dump Event "gpf", detail "" - Please Wait.
    JVMDUMP007I JVM Requesting System Dump using '/tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/core.20110907.081216.6947032.dmp'
    JVMDUMP010I System Dump written to /tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/core.20110907.081216.6947032.dmp
    JVMDUMP007I JVM Requesting Snap Dump using '/tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/Snap0002.20110907.081216.6947032.trc'
    JVMDUMP010I Snap Dump written to /tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/Snap0002.20110907.081216.6947032.trc
    JVMDUMP007I JVM Requesting Java Dump using '/tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/javacore.20110907.081216.6947032.txt'
    JVMDUMP010I Java Dump written to /tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/javacore.20110907.081216.6947032.txt
    JVMDUMP013I Processed Dump Event "gpf", detail ""..).
    Thanks
    Andrea

  • Problem during SAP NW Java Trial version installation

    Can some one guide me thru important steps in installation of SAP NW Java Trial version

    Hi Nishit,
                  first download the relavent installation guide from Service market place. then
    1)go thru the software & hardware requirments and cross check with your system.
    2) install JAVA 1.4.2_08 or higher version and c tht it will be less than JAVA1.5
    3) install the Database, select the database based on the operating system you are using & install necessary service packs and hotfixes & "instcoll.exe"
    4) then prepare a list of all label.asc files from the NW DVD and along with their corresponding Directories.
    5) then c tht all the server services are up and DB is up.
    then start SAPINST.exe .
    i hope this info will help you.
    with br,
    Rajesh,.
    <i>award suitable points</i>

  • GTS functionality in ECC 6.0

    Hi Experts,
    I've a following requirments in GTS.
    1. How to enable GTS functionality in ECC 6.0 and what are all  the areas will be affected?
    2.  How to set SPL (Denied party list) block in the sales order subsequently release approval required?
    3.Country specific Embargos block in the sales order and subsequent release approval?
    4. How to handle US (ECCN) and EU embargos?
    since I am new to GTS Kindly give me information on the above areas.
    Regards,
    Ayusri

    1. How to enable GTS functionality in ECC 6.0 and what are all the areas will be affected?
    Tcode: /SAPSLL?MENU_LEGALR3    for ECC
    2. How to set SPL (Denied party list) block in the sales order subsequently release approval required?
    Check IMG in GTS system
    3.Country specific Embargos block in the sales order and subsequent release approval?
    Check IMG in GTS system
    4. How to handle US (ECCN) and EU embargos?
    Check options in IMG in GTS system
    Would recommend going through the configuration guides available in service market place.
    Regards,

  • Product costing Template - adding new function in Environments CTU6

    Hi Guru!!
    I need to create a new function in CTU6 (Define Environments and Function Trees) in order to have information stored in MBEW table and use them in CPT2 (Template).
    The goal is to calculate a value for each material/plant and add that value during the cost estimate (CK11N / CK40N).
    Could someone help me? How can I add a field of MBEW in CTU6?
    Thank you very much in advance!!
    Marco

    Hi Marco,
    Please check SAP help for functions maintenance:
    http://help.sap.com/erp2005_ehp_06/helpdata/en/8e/f9bd66ef0e11d1a5c70000e82de878/content.htm
    Regards,
    Szymon

  • Problem after deinstallation of JDK during SAP System running....

    Hello...
               I am working as a SAP BASIS trainee.I am facing some problem related with java and SAP System.
    Actually an SAP System was already  running on the my system and suddenly i required to work on eclips (an IDE for java). And to install eclips it required JDK 1.6 version.But as we know that for SAP System an JDK 1.4 version required only.
                   I forgot and deinstalled JDK 1.4 and Installed JDK 1.6. and again tryied to installed eclips bt it was still throwing an error that it required JDK 1.6 and currently JDK 1.4 is running.
      On the other hand SAP System was getting problem during SAP START (  dialog queue waiting time elapsed .......). and finally not working.
       I deinstalled JDK 1.6.  now SAP System is working fine. It is getting started and everything is right.
    Could i get any problem latter regarding to SAP Start??and why i cant use eclips on the same system??
    Thanks in advance.
    Uttam Kumar.

    > Could i get any problem latter regarding to SAP Start??and why i cant use eclips on the same system??
    You need to make sure that the SAP system uses the correct JDK. You can install two JDKs in parallel (don't upgrade but install the 1.6 JDK in a separate directory).
    Anyway, NWDI should not be installed on the server but on a local workstation.
    Markus

  • Kanban issue - Setting for new Kanban functionality in ECC 6.0

    Hi, I am facing a problem while recieving stock from a production order. The system does not create a transfer requirement or a TO.
    Let me give you a brief background.
    This is a new functionality introduced in ECC 6.0 for working with kanban in WM.
    Supply area is created for WM location.
    Control cycle is created for material, supply area. Warehouse, storage type and Bin is maintained in control cycle record. When the GR is done for production order material is recieved in this bin.
    1) Now when the Kanban is set empty a production order is automatically created.
    2) Once the production order is confirmed the material automatically shows up in the bin.
    A material document is created which shows IM movement type 101 and WM movement type 103. Also in material document Immediate auto TO checkmark is blank.
    3) PROBLEM - System does not create a TR or a TO. the material automatically shows up in the Bin. How can we enable an auto TR and TO creation.
    Following are the settings which I have already checked:
    1) In IMG, WM movement type 103 has auto TO indicator set.
    2) IM-WM interface for 102 movement type and 103 movement type is maintained.
    The main problem is: Although the material document displays WM movement type 103 and the stock lies in WM bin, System never created a Transfer requirement or a Transfer order.
    I would really appreciate if anyone can help me in this.
    Thanks

    Hello,
    I am not sure about your settings, please refer below sap link
    [Kanban Replenishment |http://help.sap.com/saphelp_47x200/helpdata/en/95/e81fa4f57011d194aa0000e83dcfd4/content.htm]
    Regards
    Pradeep Kumar

  • Upgrading from 4.7 to ECC 6.0 And GTS 2.0 to a newer version

    Hi everyone,
    I am new to SAP SD, I am involved in upgrading from R/3 4.7 to ecc 6.0 and GTS 2.0 to a newer version. Can somebody tell me the major differences in these two vesions and also some link through which I can get some info. It is very urgent.
    Thanks.

    Dear Paranidharan Gandhi,
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP
    ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target
    Release Version which is "mySAP ERP 2005" or ECC 6.0
    Select the Solution Area like Financials, Human Capital Management, Sales....
    Select module like MM, PP, SD, QM.....
    Click on Search
    Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word
    document if required.
    and also check the release notes of ECC 6.0 in service.sap.com.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh
    P.S. you can send me a mail at my mail id [email protected] for any specific details

  • Are Business Areas obsolete with ECC 6.0 and the new GL?

    I have long heard that SAP is not planning on supporting Business Areas long term. Howver in the help documenation they still have them listed.
    One solution offered to remove them is: With the advent of new GL in ECC; the field profit center and the PCA ledger is now an integral part of new gl (FAGLFLEX). profit center and other custom fields can now easily be defined as a zero balance entity - which means it works exactly in similar fashion as BA use to work. In addition, you can mantain a PCA hierarchy and it is an attribute that appears on key objects in SAP i.e. material master, production order, purchase order etc.
    However, for customers that are using both BA's and PC's already (for example using BA's to represent plant groupings and PC's along product lines) is there a real need to make a change and remove the BA's from the current system to avoid future problems?

    Hi,
    The answer is most probably Yes. However, those who are having business area and those who like the concept can continue. New GL has revolutionised the segmental concept which is very much needed for the day to day running of business and to meet the accounting standards which are becoming more rigid due to the prevalance of fraud across the world.
    Trust this helps much!
    Cheers!

  • LE/WM functionality difference between 4.6c and ECC 6.0

    Hi,
         I am looking for functionality differences between 4.6c and ECC 6.0 for LE and WM in particular. I have already checked the sites related to overall differences. I am particularly looking for differences between 4.6c and ECC 6.0 in Warehouse Management and Logistics Execution. Helpful answers will be rewarded.
    cheers,
    Sarvesh

    This is what I have gathered from this thread.
    R 4.7 New Functionality in WM:
    •     Cross Docking
    •     Value Added Services
    •     Task and Resource Management
    •     Dynamic Cycle Counting
    •     Yard Management
    Effect of ECC 5.0 on WM:
    Archiving Data has been improved
    ECC 6.0 Version comparison link
    http://solutionbrowser.erp.sap.fmpmedia.com/
    •     Picking Consolidation for many deliveries
    •     RFID integration
    •     Enhanced Cross Docking
    •     Enhanced Task and Resource Management

  • New Functionality Enhancements in ECC

    Hi,
    Can someone brief out with the below mentioned lines.
    New Functionality Enhancements after upgrading into ECC from SAP 4.7
    1.Enabling Enterprise Services
    2.Software life-cycle management
    3.Central master data management
    4.Master data consolidation & Master data harmonization
    5.Enterprise data warehousing
    6.Enabling user collaboration
    Like how it is enabled,how it is useful and what is the meaning.
    Thanks in advance.
    Regrads,
    Naresh.

    Please check
    http://solutionbrowser.erp.sap.fmpmedia.com/
    enter source and destination release.
    Also check
    http://service.sap.com/releasenotes
    Markus

Maybe you are looking for

  • Taglib directive does not exist error

    hi frieds , i got an error when running jsf application.I used tomcat 5.0. My applicatoin tree is newjsf /java resources /mypackage /PersonBean.java (java bean) /mypackage.messages.properties (properties file) /WebConten /pages /inputname.jsp /greeti

  • How can i access photos on itunes

    I need to delete pictures from my phone to free up space. On my phone I only have less than 300 photos/videos. On iTunes it says I have over 2000. How do I access the ones on my computer?

  • LG 29EA93 29 inch Widescreen LED Monitor Lightroom Issue

    When I use Lightroom with the LG 29EA93 29 inch Widescreen LED Monitor Lightroom 5 initially looks and works OK but when I try and make changes using develop I get a gray area where the image should be (see below). I have tried other resolutions and

  • Grab Activity Hangs in BPM

    Hello, In the Process Community, when a user clicks on the grab activity, the grab hangs at the grab instance on the first click. Is there a way to get the instance to move along so that it passes the grab to the next activity? Thanks.

  • Interval Literal in PLSQL Parameter

    Are there special requirements with Interval Literal in PLSQL? I have a procedure accepting interval parameters: SQL> CREATE OR REPLACE PROCEDURE inttest( p_int INTERVAL DAY TO SECOND) 2 IS 3 v_ts TIMESTAMP; 4 5 BEGIN 6 v_ts:=SYSTIMESTAMP+p_int; 7 DB