New FW interface

Hi,
I'm thinking of buying a Saphire firewire interface. Right now I use a M-Audio Quattro USb interface with a 1604 VLZ Pro Mackie mixer. I know that the preamp on my Mackie are very good... I'm wondering if the preamp on the Saphire are equivalent or better than those on my Mackie. Do you have any other FW interface in the same price range with the best preamp ?

hi, my take on this is to minimize the number of in/outs on your box and maximize the quality of them.
in other words, if you only need stereo, maximize it's quality by buying a superior device.
both mackie a saphire are only just adequate in real terms for pro standard recordings.

Similar Messages

Thunderbolt to Firewire Adapter & New Network Interface Message

I am using the new Thunderbolt to Firewire Adapter. Why is it that every time I use it, I get the following message:
"A new network interface has been detected. The Thunderbolt FireWire Slot 2 network interface has not been set up. To set up this interface, use network preferences."
All I want to do is mount external hard drives that don't have Thunderbolt ports to my iMac, via Thunderbolt because I am using the iMac's single Firewire port for something else. The drives do successfully mount, but why do I keep getting this message whenever I connect them again?

I have no doubt what you say to do would get rid of the message for me. However, both myself and an Apple Store employee think it is odd that the message comes up in the first place. We're both curious about it, and he's going to look into it.
We tested it on a computer at the store, and found that it happens on Lion too.

My older iPod is not recognized by cars with a newer iPod interface

And my new iPod Classic is not recognized by cars with the older interface.
I purchased a new iPod when I realized my new car wouldn't wouldn't recognize my older iPod. Now I find my two older cars won't recognize the new device. Is there an interface cable adapter out there anywhere?

The Jaguar there is nothing you can do, and the new interface from the dealer are not compatible
For the BMW, you have to find out what brand interface was installed in the vehicle
can be dension or original BMW in the x5, if dension you can get something call
Scosche passPORT if BMW brand you can get a new cable from Bmw with the usb and dual power supply,
In the Mini if DIce brand you will need a new cable or new iPod interface, now they have a usb plug to do updates in case iPhone 5 is release in the future or any other updates from iTunes
http://www.oemautosound.com/pc-457-164-dice-i-bmw-t5v-mini-cooper-2002-2008-to-i pod-text-ready.aspx

UML290 & Mac: A new network interface has been detected

I have a MacBook Pro running Snow Leopard, and I just purchased a Pantech UML290 4G modem, live in an area with good 4G coverage, and I get a good 4G signal. I am running VZAccess Manager version 7.2.5, and in general it connects to the 4G network fine and stays connected. Every time I connect the modem to my laptop, Mac OS generates a "A new network interface has been detected" pop up with the option to Cancel or go to Network Preferences. Canceling makes it go away.
I also see 4 devices under System Preferences > Network:
1. Verizon UM290 (which shows connected, not sure why it's missing the L in UML)
2. Pantech UML290 USB Modem
3. Pantech UML290 USB Serial
4. Pantech UML290 USB CM
Does anyone know how to get rid of the annoying message every time I connect the modem? Thanks.

I have the same set up. Get the same messages almost everytime I start up the UML290. Not sure why I occasionally don't get it. Many others on the forum have reported this as well. For now, we live with it.
Sandy

I keep getting a "new network interface has been detected. Hoping to stop getting this automatic message I configured it, or thought I did. I'm still getting the message. How do I stop it?

I keep getting a "new network interface has been detected. Hoping to stop getting this automatic message I configured it, or thought I did. I'm still getting the message. How do I stop it?

I thought the same too, looks like its not just me having this issue, hope Apple do something soon. Thanks for your help

Where is the "apps" menu item in the new iTunes interface?

Where is the “apps” menu item in the new iTunes interface? I can no longer transfer files from my PC to my iPhone.
I just downloaded and installed the updated iTunes for my iPhone. I cannot find the “apps” menu item anywhere. How can I continue to download various types of files FROM my PC (Windows 7) TO my iPhone? I previously did this by clicking on the “apps” menu item and going from there. I cannot find the “apps” anywhere on the new iTunes. Thanks.

Tonefox, no it's not under "Music" but I did some more digging and found where Apple has "hidden" Apps on their latest iTunes for PC. You need to click on "iPhone" (upper right menu item) to display more menue items, of which Apps is one of them. When I had clicked on "iPhone" before, I mistakenly closed the the iPhone option from view because I clicked on the up arrow next to iPhone, instead of just iPhone. Once you click on iPhone, the options look similar to what they did in the earlier version of iTunes and you can easily find Apps.

ISetup new custom interface using BC4J/java class

Hi,
I am able to create new custom interface using the link :- How to setup an user to be Oracle iSetup Super user ? but I have not seen anything for BC4J filter set, as per oracle iSetup developer guide clearly explains step by step process how to create custom BC4J interface type, but they have not mention how to add filters, as per oracle developer guide we have to use 'iSetup Framework' for BC4J, if we select type as 'iSetup Framework' then we don't have option to add filter parameters.
Any idea how to see existing iSetup interface repository values, Search shows the result, but we can't go in details? any idea to see this?
Oracle have good interface repository but most of them does not have option to filter, and update so I want to customize them by adding new interfaces with filterable and update option
Regards
Anil

First, be sure your properties file is in the root of the classpath.
The Messages.properties or Messages_en.properties should be in the WEB-INF/classes/ directory of the war or as a root file of a jar included in the classpath (WEB-INF/lib).
If it doesn't work, try adding a "/" before the file name. The classloader will try to find it as a root file of the classpath.
For example:
ResourceBundle messages = ResourceBundle.getBundle("/Messages", locale);
If you are using sun appserver, the classloader hierarchy is configured by default from inside the war to outside, so it will search first in the WEB-INF/classes/Messages_en.properties and then it will search the file inside each jar file in WEB-INF/lib.
If you want more information, check the classloader hierarchy of the appserver you are using.
Hope it helps.

Search Forum option missing from new forum interface

I see that we now have a new forum interface.
I was looking to search in the forum and there appears to be no search option to search messages in the forum.
This option was there in the old forum software.
Any ideas?

Ditto. It takes too long, and returns too many spurious "hits", to search through all of the forums.
Any response to this yet?

SPROXY not recognizing new Service Interfaces

Hi all,
We are currently on SAP_BASIS 7.0 connecting to XI 3.0 on SP18. I have created a new inbound asynchronous message interface within XI and want to create a server proxy on the SAP side to consume the message from XI. When I execute the SPROXY transaction to import the XI message interface, it is not displayed under the service interface and not allowing me to generate this. Existing proxies exist under other service interfaces created since the upgrade but it doesn't seem to recognize that I created a new message interface in XI. Would this be a compatibility issue with SAP_BASIS 7.0/ECC6 to XI 3.0 SP18 or would do I need to refresh something? Any help would be appreciated.
Thanks,
Nate
Edited by: Nathan Jabs on Sep 17, 2008 6:43 PM
Edited by: Nathan Jabs on Sep 17, 2008 6:44 PM

1.Recreate the name space with other name else than sap.com
2. check whether ur namespace is displayed in light Grey Color
then there may be connection to SAP XI issue.
yes if it is in Light gray colour, you will get a status message as "NO CONNECTION TO INTEGRATION BUILDER (ONLY GENERIC DATA VISIBLE)
check whether the proxy objects are created under seperate package
check this help link
http://help.sap.com/saphelp_nw04/helpdata/en/2b/f49b21674e8c44940bb3beafd83d5c/content.htm

Rich and Basic and new webmail interfaces

You still have the "old" (Rich and Basic) and the "new" webmail interfaces; this is confusing I think, why are all still available, and does Verizon plan to completely eliminate the old interfaces any time soon?

Hi, Justin.
Thank you for your participation in this session.
We still do have Verizon Webmail Classic - Basic, Verizon Webmail Classic - Rich and Verizon Message Center. We do expect to transition all customers (except dial up) to Verizon Message Center. Verizon Message Center is our new email application that carries forward all the features of Verizon Webmail Classic in addition to offering Calendar, Call Logs and Visual Voicemail for Verizon Call Assistant customers. The transition will take place over the coming year.

LRCC/LR6 Touchscreen issues in both the new "touch interface" and the standard interface.

Currently there is no way to add local adjustments via a touchscreen (Acer R7, Windows 8.1). With the new features added for touch the only things that happens when I touch or swipe on the photo are setting flags, zooming, and advancing to the next photo.This is the same behavior whether I'm in the new touch interface or the standard one. I had no issues adding or editing graduated filters, radial filters, adjustment brushes, etc with the touchscreen in Lightroom 5. Also touch doesn't register within the tone curve.

Yes, Adobe, please fix this!!!
I have a 27" touchscreen monitor and previously had no problem applying brush adjustments in LR5 by applying my finger onto the screen, thereby giving me enhanced accuracy. Suddenly, with LR6/LRCC, the same action yields the virtually useless result of advancing to the next image.
This is exceptionally stupid!

Downloaded v.21 but don't get new user interface

I have downloaded the newest version multiple times. I want the new user interface, but my browser will not convert to the new user interface. I'm not sure if there is an option somewhere that will fix this issue, or what is going on. Any help would be appreciated.

You get the orange Firefox menu button when the menu bar is hidden.
*Firefox menu button > Options
*View > Toolbars (press F10 to display the menu bar)
*Right-click empty toolbar area
See:
*https://support.mozilla.org/kb/how-do-i-get-firefox-button
*https://support.mozilla.org/kb/Menu+bar+is+missing

WLC, mapping new dynamic interface to an already used port

This is my question
We have a multiple wlc deployment and a wlan which is running dhcp issues (scopes exhausted)
The main Wlan is mapped to a dynamic interface group (2 vlans), both vlans are mapped to a single physical port
adding a new dynamic interface (vlan) to the interface group is needed,
- a new dynamic interface will be created and mapped to the same physical port of the other two (3 vlans)
- the new interface will be addad to the interface group
the question is:
does this operation will require some network downtime (controller reboot,ap reboot... etc.) or will it be a seamless operation?
thank you

Does this mean, when utilizing an 802.1x WLAN in an AP Group, you can not dynamically assign an interface via radius because itw ill be ignored due to the AP Group settings? If so, that seems short sited to me?
AAA override get priority when AAA override and AP group is used. the debug client output should show site specific over-ride for AP group initially and once it goes into .1x auth it will return the overrided vlan.

I am having trouble with my Mac Mini's ethernet connection. Defining a new network interface shows no ethernet adaptor. Reloading SL from DVD repaired. But SL update lost ethernet again. Will Lion Fix?

I am having trouble with my mac mini ethernet. It had been working for weeks after an update to SL 10.6.8.
Once it went out and i repaired it by defining a new connection from System Preferences ->Network->(left panel service, +).
But yesterday, after a power up. my ethernet was not working again. I tried this old trick to repair it, but the interface choices
listed for '+' a new service did not include Ethernet any more. And the Utilities->System Profiler->Ethernet Cards shows
no ethernet available.
As a last ditch effort i reloaded my original SL from DVD. (I think it was version 10.6.4 but i could be mistaken on the version).
The ethernet worked! But KeyNote wasn't going to work because apparently the version i purchased depends on 10.6.8.
So I upgraded again to SL 10.6.8 (Plus some other updates like AirPort which i don't use).
Now the Ethernet is not working again. I see the same symptoms as before with the Ethernet seeming not installed.
Is this a problem seen by others?
Would going to Lion fix the problem?
Could AirPort actually be the culprit and not SL?
If i stay with my original SL, would i need to repurchase a version of KeyNote for the older version of SL?

Have you reset the SMC?
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
While you're at it, resetting the PRAM won't hurt anything and 'might' help is SMC reset didn't work (PRAM does some port control):
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Something else you might try .... you don't say how you're updating to 10.6.8, however, if you're using Software Update, you might try downloading the 10.6.8 combo update, which contains all updates to 10.6. Sometimes, Software Update doesn't work quite right, and installing the combo update fixes that. Download the update from Apple's download site at http://support.apple.com/downloads/ , using Disk Utility repair permissions, apply the combo update, then repair permissions again.

1st Gen iPod Nano won't work with new Nissan interface.

I just bought an 09 Nissan Cube that has the factory ipod interface where you can control everything through the steering wheel and radio, well my ipod has been great, yes old, but works great and always has in other cars such as the Scion xB I just traded in on it, using the same type of system.
Well, when I plug it into my new Cube, it charges fine, but just keeps saying "Ok to Disconnect" and goes back and forth to that and the 1st menu screen all the time.
I did a reset where you hold the middle button and the menu button for 6 seconds, but that did not fix it. I'm at a loss.
I know the interface works because we tried another newer ipod and my iphone works as well.
Any ideas? I don't want to spend the cash to buy another ipod.

Ah, i seemed to have fixed it! Well i've been trying for a few weeks now to sort this out and as soon as i put up a post it works. Oh well at least its working now. It seems like that the iPod needs to be playing BEFORE the iTrip is plugged in the turn it on.
I'll get me coat...

New network interfaces appear / networking fails

Hi
I have a strange behaviour of my ethernet networking interface. Every time I restart the mac the network connection is lost (I usally keep it in sleep and have no problems for days and weeks).
As soon as I enter the network setup I get the message that a new network connection has been found, called "Ethernet (integrated) 1 (or 2, 7, 8 number increases)"
If I look at my network configuration I see a long list of "Ethernet interface ((null))" and in beetween some "Ethernet (integrated) 1)" and the like
It usally takes a couple of restarts of the network preferences and then the interface appears in the "network status" view and the mac connects to the router.
I don't have any external networking cards and the like, just the ibook and a standard router. The router also connects to our mac mini without any problems I it ran for at least half a year with the ibook before this occured.
I would be very thankfull for any help since this is very annoying.
BTW I don't move the computer around and it is connected with a network cable.
Cheers
Peter

1st step, get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
2nd step, trash, (or drag to the desktop), these files...
/Users/nnnn/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
/Library/Preferences/com.apple.networkConfig.plist

New FW interface

Similar Messages

Maybe you are looking for