New FX5700 VTD 256 wont POST

My machine will not POST with my NEW New FX5700 VTD 256. My hardware summary is as follows...
CPU - CPU P4/2.4GHz 400M 478PIN/512K
Power Supply - POWER SP|430W(P4)ATXEG465P-VE
RAM - 2x RAMBUS RIMM 512M|800MHZ
MotherBoard - INTEL 850E D850EMVR
My MotherBoard BIOS has been updated to the most recent build (MV85010A.86A.0069.P25).
Anyone have any ideas why this card isnt working?
Thanks!!!!!

Thanks for the quick reply. No power is required from the power supply to the card. The card was tested successfully in another machine just by plugging it in to the AGP slot.
The power supply is an enermax eg465-ve… the specs are as follows…
http://www.enermax.com.tw/product-01.htm
Specification
Model No.   EG365P-VE FCA   EG465P-VE FCA
I/P   Voltage rating   90V~135VAC or 180V~265VAC(selected by slide switch)
   Iin=115/230VAC   10A / 6A   10A / 7A
   Frequency   47Hz~63Hz
   Inrush current   60A max./230V (at cold start)
O/P   DC Voltage    Ripple & Noise   Total Reg.   Output current ratingMin. / Max.
   3.3V   50mV   ±5%   0.3A / 32A   0.3A / 35A
   +5V   50mV   ±5%   0.3A / 32A   0.3A / 35A
   +12V    120mV   ±5%    1.5A / 26A    1.5A / 33A
   -5V   100mV    ±10%   0A / 1A    0A / 1A
   -12V   120mV   ±10%   0A / 1A    0A / 1A
   +5Vsb   50mV   ±5%   0.1A / 2.2A   0.1A / 2.2A
   +3.3V & +5V   185W    200W
   TOTAL O/P   350W    460W
Hold up time    17ms min. at 115VAC or 230VAC full load
Over Load Protection    105%~160% of max load
Over Voltage Protection    +5V: 5.6V~6.9V +3.3V: 3.7V~4.5V +5Vsb: 5.6V~6.9V
Efficiency    70% min. at 230VAC full load
Cooling    Air convection by +12V DC fan
Operation Temperature    0ºC ~25ºC for full rating of load, decrease to 80% rating of load at 40ºC decrease to zero Watts O/P at 70ºC
Storage Temperature    -20ºC ~80ºC
Humidity    Operating: to 85% relative humidity ,non-condensing at 25ºC Storage : to 95% relative humidity ,non-condensing at 50ºC
MTBF    100K hours at 25ºC, 70% full rated load, 120VAC input
EMC    EN55022 CLASS B, EN61000-4-2Class B EN 61000-4-3 Class A EN 61000-4-4Class B EN 61000-4-5 Class B EN 61000-4-6 Class A EN 61000-4-8 Class A EN 61000-4-11 Class B FCC Part 15 & Part 2 CNS 13438 Class B
Safety    UL cUL TUV DEMKO NEMKO SEMKO FIMKO
Dimension    W150 x H86 x D140 (mm)

Similar Messages

New rig 990fxa-gd80v2 wont post debug code 19

I am building a new rig for my gf's brother and i can not get my new mobo to post. I am getting debug code 19. I couldn't find a lot of info on what the code means but from what I have seen its apparently a problem with the BIOS not being updated for my new CPU. I have tried all of my current working components from my rig on the board as well and it still showed code 19. Here are the specs on the rig.
MOBO 990fxa-gd80v2
CPU AMD FX-8320
PSU 500W RAIDMAX
GPU EVGA GeForce GTX 560 Ti (Fermi) 1GB
RAM G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600
Like I said however I took apart my rig completely and switch all my known working parts onto the new MOBO and got the same error code. So I am not sure if the issue is really an outdated BIOS because it wouldnt post with my AMD Phenom II X6 1100T Black Edition. Any help would be greatly appreciated.

ok so it has been a few days since I last posted because I have been busy but I just finally had time to work on it. I essentially took out my mobo and replaced it with the new one that had been posting code 19. Using all my known working components from my computer including my PCU I am still recieving the same error code, even after moving my known working RAM into each different slot.I'm getting quite desperate here now and just am plain lost in trying to understand what seems to be the issue. I'd be very grateful for anyadditional information/tips here. Thanks.

Please help 790GX G65 wont POST

Hi MSI community,
I have a brand new 790GX-G65 as part of my all new build and it wont POST.
here's the system
790GX-G65 - winki edition (winki not connected)
Phennom X4 965 Black (AM3 package, 3.4GHz)
Corsair 400W PSU
2*2GB Corsair Dominator DDR3 - p/n cmd4gx3m2b1600c8 , which according to the reseller's website is guaranteed to support all DDR3 platforms from AMD
using the onboard ATI RADEON 3300 via the vga socket
I have the board outside the chassis on a peice of cardboard
the 24 pin connector, 4pin connector, heatsink fan, CPU, ram, keyboard(tried PS2 and USB ones) and monitor are the only things connected.
I have tried using each ram stick individually in slot1, both together in slots 1 and 2 and no ram at all.
In each case when i start the system the fans come on, the reset and power buttons light up, the five blue LEDs in the top right corner come on NB1,LED2,LED3,LED4 first then LED1 a second or so later, but nothing else happens.
no beep codes(have tried with and without the system speaker connected), no signal to the monitor (tried several monitors)
I've tried clearing the CMOS several times.
it seems to me like its a dead chip or board but i cant truly rule out ram.
anyone have any thoughts or suggestions?
I will ask around to see if i can find another AM3 chip or board to test against but most of my friends went the intel route
many thanks

Hi Guys,
Thankyou all for replying, sadly though it still doesn't work :(
nt650
I could understand the psu struggling if i had load of othe things running off it, but it's just the board and chip.
I'm happy that its not the board shorting out on the cardboard.
I've tried it with a couple of old ATI rage IIs I had lying around and theres no joy from either of those. both known to work in other pcs
I'm using the standard AMD HSF so the clip on that shouldn't have caused a problem. I didn't need a hammer to fit it!
HDD is not connected
CMOS battery seems fine
paperclip test was fine, fan spun up immediately
Fredrik
I cant be sure what bios version i have, its a brand new board and i havn't flashed it so whatever it shipped with, v1.4 I guess. Are there any known issues?
Bas
I checked the pins again, all there and straight.
Hans
I'll try and lay my hands on a beefier PSU tomorrow, but with just chip and board it should run ok. I know it's near the bottom end of the recommended range but the PSU companies will always want to sell you more than you need.
One other thing I tried just for kicks was to start the board without the chip in at all,
the hsf still came on, the speaker still did nothing but only LED1 LED2 LED3 and LED4 came on, not NB1. I have no idea what (if anything) that means, but hopefullly someone on here does.
Anymore ideas out there? They would be gratefully received

Z68A-GD80 Wont post with new GPU.

I have two working Asus 7970 Matrix cards that my PC wont post with them in. All power connectors plugged in, tried two different PSU's a Corsair HX850 and a Corsair AX1200i. Tried both PCI-E slots on the motherboard with both cards.
The cards work in a second PC however, so it seems like its the motherboard.
No display signal, no beeps, no post.
Also, the system posts and works fine with a GTX 590 instead of the Asus 7970, and Sapphire's 7970 works fine as well.
i7-2600k
MSI Z68A-GD80
Corsair AX1200i / Corsair HX850
Asus 7970 Matrix
Corsair Dominator Platinum 4x4gb 1866

Hello Svet, even it has been posted more than one year ago. I experienced the same problem with a HD 7950.
I just want to say : Yes it works finally BUT where did you find this Bios ???
I use the global website and this version is simply missing !!!*
The first thing I did while seeing that I didn't have no video signal and no boot is to upgrade the bios but I only find the .H5 or the bios for Ivy.
Anyway I have a mixed feeling, quiet happy and yes ... thank you for your help now it seems working fine.
But on the other hand ...what a pity from MSI to have a so bad listing of their bios.
Once again thanks

MSI FX5950 Ultra VTD-256 System freeze in fullscreen 3D games

Greetings everyone
I changed from a MSI GF4 Ti4200 to a MSI FX5950 Ultra VTD-256 about two months ago and since then I have the following problem:
During any 3D game I have tested so far (which are a very few, I admit... too little time available) and after about 10 secs to 10 minutes of the game running in fullscreen, the system freezes completely (no mouse movement, no alt-tab, no soft reset) while the sound goes on looping. Games I have tested include UT2003, Star Wars Racer, Syberia. System also freezes during any version of 3DMark.
Strangely enough, I never had a problem with UT. No problem also with any game in windowed mode (where available), for instance played UT2003 in windowed mode for about an hour, then switched to fullscreen, then system freeze after about one minute. Furthermore, no prob in any 3D app (3DS, ...) or while developing 3D (OpenGL).
I have tried each and every available VGA driver, either from MSI or straight from nVidia. No change at all except with the 52.16 drivers using which the system still freezes but does not remain frozen, instead, after about two minutes a BSOD comes up announcing that...
"A problem has been detected ...
The problem seems to be caused by the following file: nv4_disp.
If this is the first time ...
The device driver got stuck in an infinite loop. This usually indicates
problem with the device itself or with the device driver programming the
hardware incorrectly.
Please check with your hardware device vendor for ...
Technical information:
*** STOP: 0x000000EA (0xFF0B5020, 0xFF6CB810, 0xFF597198, 0x00000001)
nv4_disp"
Same behaviour with the card severely underclocked through the MSI Timings control panel tab.
Other things I have done:
- Changed aperture size to various values: No change
- Reinstalled nForce2 drivers: No change
- Uninstalled and cleaned (Driver Cleaner) sound drivers, disabled SB: No change
- Disabled onboard audio and LAN: No change
- Tried all possible device driver setting for AA, filtering, rez, others: No change
- Checked memory (memtest86+): No errors
Another issue with the card that might be of use mentioning here is that the 3D!Turbo Experience app does not display Temperature, Voltage and Frequency: The respective displays are dimmed and controls are grayed.
Thanx in advance for ANY help / suggestions / similar experiences
Jorge

Greetings my good mates.
GlennVidia, a great and professional post about parametric differences! Finalreminder thanx a great lot for the versions and info! It seems that 3D!Turbo Experience does not work with 5950U eventhough it bundles with it. On my mobo the "Version 1" tag is under the VGA so this is probable why you can't see it (needless to say that I am not suggesting that I want you to remove your VGA just to give me this not-so-important info ).
Here's what happened last night.
I finally decided that I could no longer avoid what I've been avoiding since the very beginning, that is, mess with my other desktop, a Linux box with a Shuttle AK32 mobo, an Athlon XP 1800+, 256 of noname DDR and various other stuff. Another reason I didn't transfer the card to the AK32 mobo at the first instant is that I had always considered the AK32 an inappropriate testbed for the 5950. However, I felt I was in desperate need to check the 5950 on another mobo. So I set up the system above with very conservative bios settings and crap memory timing, the 5950, the Heroichi 450w psu, neither chassis nor chipset fan, and then installed WinXP Pro, SP1, DX9.0b, Hyperion 14.45 and MSI VGA 56.63.
The 5950 was running at AGP 4x, CPU at 50-52C idle, system 27C idle, voltages a little low (for instance, 11.75 for the 12+), however:
- 3DMark 2003 completes at first run (first time I was able to see the entire test).
- 3DMark 2001 completes at first run.
- UT2003 does not freeze no matter how long it runs (and I am talking extreme settings for AA, details, resolution, etc).
- Both 3DMarks keep running countless times or in loop mode without freezing.
I understand that the AGP 4x makes a huge difference on the communication between the mobo and the VGA. However, I doubt that the problem will go away on the K7N2 if I set it to AGP 4x (which I am not willing to do anyway). There are yet many tests to be done (new K7N2 bios, etc), however this is the first optimistic result I have got since three weeks now and I am quite happy about it. I might be wrong, but now I am almost 100% certain that the 5950 is not faulty.
Furthermore: On a K7N2, Finalreminder had the exact same problem as me with 3DMark 2003, that is, freezing during CPU tests (mine would also always freeze during the CPU tests and nowhere else). I think this rules out the chance of a HW fault on my mobo only.
Another pattern I have isolated is that better cooling has solved most (if not all) of Finalreminer's problems and quite a few of mine (at the beginning, 3DMark 2001 would freeze during the first run and UT2003 after a few minutes), and this too is common in both cases, Finalreminder's and mine. However, in my case, the freezing is still there even in extremely low temperature cases. To rule out the chance that temperatures go high during fullscreen 3D, I used Motherboard Monitor to log temps and voltages. Right now the log file is on a non-attached disk so I can't upload it and give you the url (I'll do that), but I can tell you that the temps and voltages are great during an entire 3DMark that ended-up freezing: CPU goes to max 58C, system to max 37C.
I think that the only hypothesis that may still stand is that MSI K7N2 Delta and MSI 5950U VTD-256 is, sometimes, a bad combination, no matter how ridiculous this may sound.
By no means am I suggesting that this is MSI's fault! As GlennVidia has explained in his latest great post about parametric differences and as my basic knowledge of electronics enables me to understand (I am a radio amateur), these are things that happen and cannot be predicted. I trust MSI and will keep trusting it.
To solve my issue, after some more testing, I am most probably going for a new mobo. I am open to suggestions and wondering if it would be a good idea to start a new thread about WORKING combinations of MSI 5950U-VTD256 and various mobos. This forum has been far too helpful for me to go out and buy something without getting feedback first .
Jorge

I torrented new songs but itunes wont play them how do i make them work?

i torrented new music and itunes wont play them saying the files cannot be found the files are still on the computer and i can find them just find but itunes cant. how do i make itunes recognize, find and play my new music?

I don't think it's your iPod. I reckon it's something to do with the tracks themselves. I've been searching through similar posts and have tried the following suggestions (without any luck):
- swap you iPod cable to another USB port and re-sync
- whilst the iPod is connected, deauthorise your computer in iTunes and then authorise it
- re-created my iTunes library (as your iPod can only sync with one library, it will wipe clean your iPod and re-sync it) - http://docs.info.apple.com/article.html?artnum=93313
- have even restored my iPod
and still the 3 tracks will not play. However, I have subsequently downloaded another track (different album and artist) and that plays just fine. I have since contacted customer services about this and they have been very quick to respond, but unfortunately the re-download solution they proposed hasn't worked either so they have escalated the problem internally.
One thing I have tried (and I think it's legit??), is to burn the tracks to a CD. Remove the originals from your iTunes library to another folder. Re-import the tracks back into iTunes and re-sync. I've tried this and the tracks will now play on my iPod. I believe the above process strips off the DRM, so maybe the problem lies with the DRM encoding and your iPod believes you don't have permission to play the tracks when in fact you do. If you don't feel comfortable about doing this, I would contact customer services.

Black Screen after computer boots to Win XP With NX6600 VTD 256

My son recently purchased a new computer and gave his old one to me to salvage what I wanted.Since he just a few months ago purchased my NX6600 VTD 256 from me I naturally salvaged that first. I tried to install the NX6600 in my other son's computer without success. First the particulars:
MSI 845 Pro2 Mobo, 512 mb 133 Mhz Ram, 1.7 Ghz Intel CPU, Aopen AO350 12A PNF power supply, 350 watts with 18 amps on the 12 volt rail.
I did a fresh install of winXP on a freshly formatted HDD. Installed service pack 2, the latest intel drivers, and 5 different versions of the driver packages including ver 77.77 all with the same results.
After the computer boots I am intermittantly faced with a black screen after the WinXP logo disappears. This sometimes happens 3 times in a row before I get a working screen. After a good boot the NX6600 benchmarks good with very good marks!
I am at this point strongly suspecting the power supply is not up to the task, even though the specs for the NX6600 recommend a 350 watt power supply. Before I start removing all the hardware from the computer except for the NX 6600 to see if I have a hardware conflict, I doubt this because with the NX6600 installed without drivers I get a good boot every time.
I'm open for suggestions.

Thanks for the reply boss killer.
I tried what you suggested with a CRS power supply 300 watts with 15 amps on the 12 volt rail.
with the exact same results.
I then put the crs powersupply back into #1 son's old case reinstalled the nx6600 and gave it a go
Particulars for the old computer ECS K7VTA3 ver. 1 Mobo with 512 Mb DDR, nx6600VTD256 vid card and the CRS Power supply 300 watts with 15 amps on the 12 volt rail , and win XP pro service pack 2.
Funny the card works great without any problems with this setup! And the powersupply is 50 watts less and only 15 amps as compared to the other with 18!
I then pulled all the hardware out of #2's computer and tried it with only the memory, cpu, and NX6600 connected.
I had to boot 5 times before I had a working screen.
Now I'm thinking that there is somthing amiss with the NX6600 and the MSI 845 Pro2 ???
I'm thinking that I would be better off installing the K7VTA3 in #2 son's computer with the NX6600, since this works fine. When I did a benchmark with this setup it outperformed the *45 Pro 2 NX6600 combination By 300 points 2600 as compared to 2300 aqua mark points.
Isn't this fun?

Motherboard wont post

I just got my motherboard back from warranty (after 7 bloody weeks)...anyways i put it all together and the stupid thing wont post. There are no sounds whatsoever coming from the motherboard. I double checked all the connections and everything is in order. I know its not the power supply because its a brand new Antec case out of the box (see signature for details). All other components are operational and everything gets powered up but like i said no sounds at all (POST) can be heard from the motherboard.
Any ideas boys and girls????
If the case is that the motherboard is stuffed even though it just came back from warrant after being fixed, what is MSI's policy on things like this, because the warranty period just expired. This was the second time the mtherboard was being fixed by MSI rather than being replaced and both times it took them 7 weeks.
I'm open to suggestions....please advise.....thanks

i got no accessories other than the components specified in the signature. Even if i had anything else connected there should be beeps generated by the board to suggest an error.

1.8 bios wont POST, what can I do?

Well... it seems to me that the beta 1.81 bios is more stable than their final release. Now I don't know what to do. My computer wont POST. It just beeps continally until I turn it off. There are no patterns, its just one beep after another with about 1-2 seconds between beeps. Can anyone help?

Hi Guys n Dolls
heres another prob ive found with bios 1.8
after a successful flash in windows and reboot everything seams OK cept for a worrying message ... Checking NVRAM .. NO NVRAM
the new bios stole my NVRAM so now im scared to turn puter off in case it wont boot again .. lol
anyone else got this .. if so did your pc turn off and on again .. geeeeee what a nightmare
EDIT : well i got brave and switched pc off ... thankfully it restarted .. so not sure why it stole my NVRAM .. lol

MSI DKA790GX wont POST |SPLIT

msi DKA790GX
PHENOM 11 X4 940BE
OCZ FATALITY 800MHZ 8GB
EVGA GTX 285
ANTEC 650 WATTS
2X WD 320GB RAID 0
I am having almost the same issue but if i turn the switch of to power supply then press the power switch on mainboard it will boot
if i try to restart from windows it will not post if i try to turn power on with switch on case (antec 900) lights come on alot of sound but will not post, unless i use switch on motherboard it will not post at first it was random but its getting worse i tried the new bios 1.9 no luck
it works great other than i have to use power switch on motherboard for boot up
temps are normal, i have reseat the cpu, memory power cables nothing ran tests after test it all seems fine but it wont post with windows restart or power switch on tower

Since both problems and fixing has to do with the power supply unit (PSU), I would check power connections. Perhaps try with another PSU, but it sounds like if some devices share the wrong power line. Antec PSUs usually come with a manual, have a look there for good distribution of the cables/connections.
Could also be traces - metal debris - in the motherboard, that creates power "jumping".

MSI 785GTM-E45 wont post with 4 GB ram just about at witts end help please

I have a MSI 785GTM-E45 with a AMD Athlon 7750 Black Edition Dual Core 2.7 (all overclocking was restored to normal for install of new ram) that ive been putting together its just about done except vid card and memory.. K heres my problem I"ve been using a 1 X 1gb single channel ddr2 800 pc2 -5300 1.8v 240 pin to set stuff up untill i got my new ram. well i got my new ram today its 2 sticks 2 GB each PC2-8500 DDR2-1066Mhz ..CL 5-7-7-25 dimm when I install it on my board the machine wont post. seems like it boots theres no beeps or anything so i cleared the CMOS Flashed and upgraded the bios set bios to defaults still wont post. I tried one stick then other tried one slot then other nothing took it out put in my old ram fires right up. HELP what am i doing wrong. PC2-8500 DDR2-1066Mhz owners manual and everything i read online says this should work they are a new maching pair.

hey mark thanks i took it to a shop today guy said it was 100% compatible so i asked him to test it came back bout 5 min later said it was completely dead worthless so in sendin it back bout some from the guy at the store machine runs awsome now i just need a good inexpensinve graphics pci-e pretty sad when you spend good Money and a few days looking for excactly what you want / need and when you get it its trash im just glad it wasnt my main board

645E Max-C Flashed wont POST

I just got a Max-C 645E Ms-6547e.
I had this problem with my ms-6529.
It wont boot into XP! I have a dual boot with 98SE and XP Pro. It boots into 98SE fine but gets to the Boot Screen of XP and I get a Blue screen error about Viruses and Newly installed HDDs. I know that isnt the problem. like I said my 6529 did the exact same thing
On the 6529 I changed the Modem/Audio settings and flashed the BIOS and it booted.
So I try it with this new POS. Flashed my bios with .31 and now it wont POST! The DLED sticks in "Early Chipset Initialization" and hangs there. Ive pulled the CMOS Battery AND jumped it to 2/3 position. At this point recovery isnt likely.
Need help. Ive been a loyal MSI user for a while now but am losing patience.
Thanks
A

Quote
Originally posted by the_owl
I just got a Max-C 645E Ms-6547e.
I had this problem with my ms-6529.
It wont boot into XP! I have a dual boot with 98SE and XP Pro. It boots into 98SE fine but gets to the Boot Screen of XP and I get a Blue screen error about Viruses and Newly installed HDDs. I know that isnt the problem. like I said my 6529 did the exact same thing
On the 6529 I changed the Modem/Audio settings and flashed the BIOS and it booted.
So I try it with this new POS. Flashed my bios with .31 and now it wont POST! The DLED sticks in "Early Chipset Initialization" and hangs there. Ive pulled the CMOS Battery AND jumped it to 2/3 position. At this point recovery isnt likely.
Need help. Ive been a loyal MSI user for a while now but am losing patience.
Thanks
A
Its dead, u just flashed the wrong bios my fren

848P Wont post

The new comp I built will not work. This is pissing me off. It wont POST, and gives me the following error: CMOS/GPNV checksum bad. I run SCSI drives
I exchanged batteries with another machine, and it still wont post
I have tried both sticks of RAM, but it wont post
Tried disconnecting all devices, wont post
Here are my specs:
MSI 848P Neo mobo
3.2C 800FSB Pentium 4
1GB no-name PC4200 RAM
LSI Logic 21320 Ultra320 SCSI controller
72.8GB Ultra320 SCSI HD
GeForce FX 5200
No-name PSU that delivers plenty of power at 12v (24A)
I am running AMIBIOS 1.0

Hi Alex,
How long ago did you buy board???? As Bios 1.0 is first release....
Which country you in? UK, has buyer protection in which the seller is responsible for faulty products......if UK quote Sale of Goods act 2002!!!! RMA can take upto 6 weeks, depending on the supplier in country you are in. I am not sure of MSI direct times....
What about mounting holes, too close???? How do you mean?
Yes, it could be a Memory problem if you only have Bios 1.0 as 1.4 has cured alot of boot/post problems.
Del

P35 neo combo wont post

Hi, i just bought new motherboard for my system (msi p35 neo combo) and it wont post or beep at all, all the fans start but the screen wont wake up(aka black screen). All the components works just fine on my old asrock 775-dualvsta. So far i've tried to boot up with&without any ram, graphics card, hard-disks, checked all cables X times, re-seated cpu cooler, cleared cmos, etc. No go! :( Any advices?
I bet it's DOA but i want to be sure before RMA, long process... >:(
My setup: C2D e6300, radeon x1950pro, 2gb PQI 800mhz ddr2, samsung t166 500gb, scythe ninja plus, antec slk3700amb, Hec PM-420PB.

Have you checked if all power connectors for board and video card are properly connected?
Board:
- 20/24-Pin ATX
- 4-Pin +12V CPU (connector cables should be black/yellow, otherwise it is additional 4-Pin plug for the 20+4 ATX connector above)
Video Card:
- 6-Pin +12V PCIe
Quote
So far i've tried to boot up with&without any ram, graphics card, hard-disks, checked all cables X times, re-seated cpu cooler, cleared cmos, etc
Take the board out of the case and test it on a non-conducting surface in barebone confuguration (just CPU, video card, one stick of RAM, power connectors, keyboard). Clear CMOS with main A/C power connector removed from PSU after hardware changes. See if that changes anything.

Msi 790gx-g65 wont post after shtting off the night before

Tried turning it on this morning only to find out it wont post. Symptoms are....
1. Everything powers on, Fans. and all. but you cannot shut it off while holding the powerswitch in 4sec's.
only by unplugging the powersupply
2. All phase lights come on except for the #2 from the left #X###.
Only thing I can think of is it could either be the CPU of motherboard. I have already ruled out PSU Video And Memory since I took out the memory and didn't get any error codes at all, I have already done the out of the case test and reseated the CPU along with only using one stick of memory with the same exact results. this CPU worked alright but seemed to be a little on the hot side since I got it. could this be a dead CPU? HM.. I Don't know? you're opinions are greatly appreciated..thank you.

Quote from: Bas on 12-July-09, 01:00:16
You used too much compound....only a tiny drop is enough....in fact so much that you hardly see it...
It has to be that little, as without it could function better, no joke.
Only about a grain of rice give or take. Im buying a new motherboard. since the onboard video will not even work, I am confident that its the board. I have always bought MSI Motherboards but all were intel untill now. Seems that i may have gotten a faulty board. Its also been more than 30 days and I would have to send it back to msi and I doubt they would even take it back since I have put afterarket cooler on it. I'm sure they would blame me for it going bad. From the first day I seen high temps on this board, its not MSI's fault either.Thats just how things go. Maybe ill have more luck with the next board.

New FX5700 VTD 256 wont POST

Similar Messages

Maybe you are looking for