New G4 ti4200 8x card from gf2 card. Performance not where it should

Just installed this card and I thought I would gain a big fps increase but instead, it degraded in d3d and only a couple fps increase in gl.  Picture quality is about the same.
I have only 1 monitor connected but windows will always put up a default monitor in addition to the one I picked in device manager.
Also under display property, MSI info tab, the agp info box doesn't have any boxes checked and I'm unable to check any of them.  The card is 8x agp and my mobo is 4x agp.
Unable to figure this out.
Specs:
Asus Mobo p4B266, Pent4 1.5 ghz
256 mb ram
Any help is appreciated guys.  Thanks

As far as I could tell there are no additional drivers for download for mobo.

Similar Messages

  • HT201412 Safari could not open the page because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work. Can you please help me. I've tried everything. Thanks ya'll!

    Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!

    Hello SavannahSweetie,
    I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
    Start with this section, and work your way down if needed.
    Basic troubleshooting
    Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
    Verify that you are in range of your Wi-Fi router or base station.
    Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
    Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
    Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
    All the best,
    Sterling

  • There were some updates on my Apps.  I updated them on my iTunes but my iPad did not get the same downloads/updates thru iCloud.  Does the iCloud only works for "New" Apps or Books downloaded from the store but not the "Updates"?

    There were some updates on my Apps.  I updated them on my iTunes but my iPad did not get the same downloads/updates thru iCloud.  Does the iCloud only works for "New" Apps or Books downloaded from the store but not the "Updates"?

    Purchased music does not count against your iCloud storage and you cannot get rid of them in the purchased tab.
    What is backed up
    You get unlimited free storage for:
    Purchased music, movies, TV shows, apps, and books
    Notes: Backup of purchased music is not available in all countries. Backups of purchased movies and TV shows are U.S. only. Previous purchases may not be restored if they are no longer in the iTunes Store, App Store, or iBookstore.
    Some previously purchased movies may not be available in iTunes in the Cloud. These movies will indicate that they are not available in iTunes in the Cloud on their product details page in the iTunes Store. Previous purchases may be unavailable if they have been refunded or are no longer available in the iTunes Store, App Store, or iBookstore.
    Look here for help on managing iCloud storage.
    http://support.apple.com/kb/HT4847

  • I've installed Firefox on a new computer, but my bookmarks from previous computer are not listed in the Bookmarks menu. Suggestions?

    When I sign in to my homepage -same homepage as on previous computer / igoogle firefox browser- there are no listings in my Bookmarks menu. I assumed the bookmarks would automatically appear once I signed in. Did I assume incorrectly? If so, is there a way to get them back?

    The bookmarks are on your machine not stored at Mozilla. You woud
    have to ttransfer them from you old machine, see
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    If you were using bookmarks at Google then signing into your Googe account
    would be necessary as we as installing an extension to allow you to access those
    passwords.

  • HT1267 I bought My Iphone 4s from Iran, I need to make an Apple Id but Iran is not in the registered countries?! I dont know what to choose? Also From Iran we do not have Credit card facility for payment option?!! Any idea how I can get FREE APPS on my Ne

    Hi there,
    I bought My Iphone 4s from Iran, I need to make an Apple Id but Iran is not in the registered countries?! I dont know what to choose? Also From Iran we do not have Credit card facility for payment option?!! Any idea how I can get FREE APPS on my New Phon?!!
    Please let me know how I can get this sorted as soon as possible!! Thank you very much

    You can create an Apple ID without a credit card, see this article:
    Create an iTunes App Store account without a credit card
    Check this post about iPhones from Iran:
    Re: Why Apple does not support from Iran? And why not open a store in Iran?

  • Card reader not recognizing CF in leopard on new 24" Imac.. HELP PLEASE!!

    I have a new 6-in-1 card reader that my new IMac (Leopard, 24", 2.4gHz, 2gb RAM) won't fully recognize. The thing is, it recognizes it if I put an SD card in it, but not a CF card. (This is annoying because one of my cameras uses CF). The stranger thing is that if I boot XP in parallels on this IMac, XP recognizes both the SD and CF cards just fine in the reader, and the files import flawlessly. This makes me think the computer, the connection, the card, and the reader are not the problem. My Macbook also recognizes the CF card without any problems, so it's not just that the card reader isn't fully Mac compatible. Any ideas? It's super annoying and I'd rather not buy a different card reader when it seems so close to working... I can import photos through parallels and XP, but that's annoying and there should be a way to get this fancy machine to see the CF card in the reader...

    Not being able to transfer photos from CF cards using my USB2 card reader, I connected my Canon D60 camera to my MacBook using the original Canon cable. The Mac doesn't see that either and there appear to be no relevant rivers on the Canon site. Is there a problem with USB2 under Leopard? Is Apple aware of or working on this?

  • MSI Ti4200 128MB card availability

    My son's friend is building a system very close to the same as mine and he has most of the parts now that he bought from NewEgg. The problem is that he wants to use the MSI Ti4200 video card that I have but he can't seem to locate one.
    Has MSI stopped producing these video cards or is the demand so great that nobody has any? I haven't even been able to locate many of them from Price Watch or other search engines either.
    Any ideas where he can get one would be appreciated.
    Thanks
    Mike

    Here is one but is currently out of stock.  Here and Here is another and cheaper.  Im giving you all these sites just in case you dont feel like you can trust one or another.   Oh and i have to throw this in there a 4800 for only 20 bucks more  :D Here Good luck

  • My Mac Mini and MacBook, both running Mountain Lion, say that a brand new 16gb SDHC card is not readable. What's going on? Is it the card?

    I'm using a brand new SanDisk 16gb SDHC card and the moment I put it into the reader it says "The disk you inserted was not readable by this computer" with options to Initialize Ignore or Eject.
    Any thoughts?

    Hello people.
    I cryied long enough, browsing the Internet looking forward to a solution for the same case you are stating here. That said, I do not want you to suffer any longer the way I did if you run out of solutions...
    In my case, I was trying to copy images from my SD-HC 2 memory card (San Disk, 8GB) to my computer (Mac). I was using a chinese memory card reader (Kino, "Mini Multi in One memory card reader", model SY-682, USB 2.0). The memory card reader/hub used to work just fine before, but till recently it didn't...
    I had a suspicion on my OS updating, since I used to copy images from this SD Card to my computer on a monthly basis (I used to have Mac OSX 10.6.8, and a technician recently changed my Mac's operating system to 10.7.5 or so, as far as I can detail... It wasn't a god job what he did, but anyway)...
    My husband saw me crying in front of the computer after reading and chasing to a lot of Google searches, and what he did was simply this:
    I used to put the memory card in the reader, and then plug the reader into the Mac's USB port... And it didn't work... Right?
    He, instead, did it backwards: he plugged the memory card reader to the Mac's USB port and THEN slide the memory card into the slot of the memory card reader...
    By doing this, you do not get to see the image of the memory card in your Mac's desktop, BUT: if you open a new Finder window, you will see the image of the memory card into the left margin of the window, right behind the "Devices" title... In my case, the memory card image just read "EOS_DIGITAL", as I use to take pictures with a Canon EOS camera...
    Anyway, I hope this helps, and please replicate this answer to those in the same suffering I used to be till 15 minutes before.
    Good luck.

  • Redemption code from Photoshop Elements 12 purchased from Best Buy does not work 'Oops! This code doesn't seem to be active. Please contact the retailer you purchased the card from, or use a different code.'   I have an invoice and the pickup notice from

    Redemption code from Photoshop Elements 12 purchased from Best Buy does not work 'Oops! This code doesn't seem to be active. Please contact the retailer you purchased the card from, or use a different code.'   I have an invoice and the pickup notice from Best Buy.   What other information does Best Buy need?   What will they do?   Will I get a new box?   What happened to the days of just typing in a simple s/n?   

    Redemption Code Help
    http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  • New imac 21, airport card anomalies...

    hello everybody
    just to inform, as here apple ssupport  didn't ptopose such "simple`" solution  to a kind of network misconfiguration , bad access to web services, aso
    1) after a few s=days, a brand new imac 2.5 g intel core i5 was not connecting to te router correctly.
    2) when calling  apple support, describing the airport icon showing @no airport card connected@,(even if the system info[locations showed a card and even the  modem data on screen..) so  i had to pack tje machine and travel to such apple center downtown, Polanco, and here in Mexico it's a real pleasure to  ride some 2 hours in eavy traffic..
    3) arriving there, no airport card problem, and the technician described me a probable motherboard saturation or even overheating situation, i said ok, will go home and see if everything keeps working fine.
    4) a few days later, again, no access to web, automatic or personalized network or account adjustments seem fine.. but no way to receive or send mail, web pages crazyly slow, aso...
    5) when  24 hours later no way to  see nothing, even  the airport icon with stripes shows just clear empty grayish icon..
    6) calling again ther apple service center, again they  ask me to carry the stuff downtown, must be or could be probably a configuration problem, need to be checked there, aso, no way to look for or propose some solution just by calling them aso.
    7) calling ip service, we tried for more than an hour to check , trying all options, f.i. using ethernet cable (modem always good,  and machine working fine then) we examined all options, accounts configuration, the automatic was not accepting a connection, system showing "Airport connected but no ip address because not attributed, or missing", aso)
    8) and  when changing from automatic locatoon to the configuration  we had installed weeks before to help solve the connection problem , same result.
    the directions of ip, router subnet mask aso were correct, changed eventually, no way, nothing was connecting.,  we tried quitiing such non automatic configuration to avoid possible conflicts, no results.
    9) after an hour or so, the technician from my IP offered to quit the airport configuration (even with a green bulb visible that  airport  config was not connecting, the desktop icon was  sometimes greyish, sometimes empty, aso...)  and add a new one.
    10) at the moment  it was created (as "airport 2") ... the automatic configuration looked instantly for another ip adress, and everything works fine now..
    SOSO why doesn[t apple support technicians have suchj ideas ? why did  the airport icon even show a "not connected{ airport card message ?
    I phoned  those apple guys around, explained them the solution offerde by phone by the IOP provider, no comment, answer or even a simpe "thanks" for  such suggestion , from them,  whan the received such info, Hopefully will eb useful  for others users, and eventually after a post here. tschuss
    Form Mexico city...

    Looks like this issue has hit its fair share of people. Spoke to Apple support today about the same issue. Brand new iMac 27' 2.8 quad core with 8gb of ram and I opened the box only to find my airport card was not recognized by OSX. After performing several support steps, the staff let me know that this was indeed a hardware related issue - I am not advocating this is everyone'e issue just mine.
    Here is what we did to troubleshoot and determine it was hardware related.
    Open system profiler / go to network and look at airport - if all you see is "software versions" your hardware is not recognized. You will need to reboot the system and clear the SMC. To do this do the following:
    Unplug everything from your iMac and wait 60 seconds with absolutely nothing connected to it. After that, plug in your power cable and press the power button down, letting it go after 2 seconds. Immediately after the power button is let go - hold down option + apple + p + r you will hear 2 "bong" sounds, then let go of the keys and boot. If your hardware does not show up you will need to boot to the OSX install DVD to get a "clean" install of OSX.
    Boot to OSX DVD
    Insert DVD
    Shut down system
    Power on system - hold down C key until you hear a chime then let go. System will boot to OSX install.
    Once you pass all the prompts by selecting defaults, you will come to "Install MAC OSX" asking you to select the disk where you want to install. DO NOT CLICK INSTALL. Open Utilities / System profiler. If you still do not see anything under Airport other than software, your Airport card is bad or at the very least not showing up in the OS. If you do see the airport card there, you will need to reinstall the OS to have it recognize the card.
    Hope that helps!

  • HT1918 Hello , I will like to change my payment information but my new credit card is not American , Is Canadian .How can i change the country on my billing info? I cant seam to be able to do it . Thanks a lot for your help ,

    Hello ,
    I will like to change my payment information but my new credit card is not American , Is Canadian .How can i change the country on my billing info? I cant seam to be able to do it .
    Thanks a lot for your help ,

    What country are you in ? If you are in the US then you can only use the US iTune store, and you can't use a Canadian credit card with the US store - a credit card needs to have been issued by a bank in the country where you are.
    If you are in Canada then remove your old credit card from your account and then update your country/region and billing address on your account e.g. by tapping on your id in Settings > iTunes & App Store on your phone and 'view Apple id' on the popup, or via the Store > View Account menu option on your computer's iTunes

  • I need a new wifi-adapter/wifi-card

    Hi everyone...
    I'm currently thinking of buying a new wlan-adapter...
    At the moment I got a D-Link DWL-122 (11Mbps)
    The worst thing on this USB-dongle is that there are no Linux driver available (I got to use ndiswrapper).
    Another problem is the speed:
    I'm here on the second floor, but my router is in the cellar.
    My maximum link quality (got this value from iwconfig) is 42%.. - BUT: I've put some CD's on my USB-dongle to get a better link quality... (this works!)
    Without the CD's I only got ~30% (that's not enough to connect to the router).
    Now I've been looking for a new wlan-adapter...
    It don't has to be an USB-dongle, but there should be Linux drivers for the card/dongle (not with ndiswrapper!).
    I've searched a bit and I found one pci-card and one USB-dongle that would fit (I'm not a wireless-pro!):
    FRITZ!WLAN USB Stick (http://www.avm.de/en/Produkte/FRITZBox/ … index.html):
    802.11g++ (125 Mbit/s)
    costs ~35 Euro (shipping included)
    Chipset: AVM (they provide a linux-driver on their website!)
    Super G & eXtended Range 108M Wireless PCI Adapter (http://www.tp-link.com/products/product_des.asp?id=17):
    802.11a/b/g
    costs ~24 Euro (shipping included)
    Chipset: Atheros (linux-driver: madwifi)
    Suggestions for other wifi-adapters are of course welcome, but note that the wlan-adapter should give me a good connection...!
    (I'm here on the second floor and my router is in the cellar)
    Another criteria is that it shouldn't cost more than 35 Euro.
    It doesn't matter if it's a USB-dongle or a pci-card (I don't have a pcmcia slot because this is my workstation)
    Oh, and one last thing: I live in Germany... (if this is important)
    Thanks in advance...
    XazZ

    Hi everyone again...
    I forgot to tell you which router I got...
    It's a AVM Fritz!Box Fon WLAN 7050 (very nice thing )
    Here is it's product page: http://www.avm.de/en/Produkte/FRITZBox/ … index.html
    My router is from the same manufacturer as the USB-dongle I showed above...
    USB-dongle and router support 802.11g++ (125 Mbit/s)...
    But I think the pci-card has the better antenna...
    Keep in mind that I don't know very much about wireless networking...
    Thanks in advance..
    XazZ

  • New MacBook Pro NVidia Card & Float

    Hello,
    I need some help making a decision before buying a new MBP.
    Does the MacBook Pro switch to from ATI to NVDIA cards mean a kind of downgrade for using Color, as it won't allow 32 bit float?
    Cheers,
    Gerry

    I feel sure that the lack of support for Nvidia cards will be addressed sooner rather than later.
    Or they will avoid the issue and include software based rendering and make it GFX card agnostic....
    Either way, the new machines are just so pretty, how could you NOT buy one.
    Cheers,
    Toby

  • I create new id and i can not sign in because i must provide credit card and i have not one what should i do ??

    i create new id and i can not sign in because i must provide credit card and i have not one what should i do ??

    Here's how to change or remove the payment info:
    Change or remove your payment information from your iTunes Store account (Apple ID)On your iPhone.
    Check this article to create an account without a credit card info:
    Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method

  • In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks

    In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks

    If the SIM is out of your phone, find my phone needs a data connection, so could use wifi - IF in range of a wifi and one that it can join (ie. a known network or one that is wholly open so no login required).  Your phone could also simple be turned off, so not findable, or it may have been restored (plugged into iTunes and restored as new) again, making it permanently unfindable.  Honestly, for someone stealing an iPhone, this is likely the first thing they do - restore as new and it is theirs forever.
    Find my iPhone is tied to the users iCloud account - the find function is part of the iCloud account's services and it communicates with the iCloud servers over a data connection - either wifi or 3G.
    Have you set up your iCloud account on your replacement phone, and is it working properly on that phone?

Maybe you are looking for

  • Shift key working like Command key in iMovie '06 Clips Pane

    I am trying to move a lot of clips at once within the Clips Pane. The Shift key is not working properly; instead, it acts like the Command key. When I click on one clip, then Shift-click a final clip, no range of clips get selected: instead, only THO

  • Installing Image Mastering API v2.0 (IMAPIv2.0) for Windows XP (KB932716) error

    I keep receiving this error when trying to run or save the download for Image Mastering API v2.0 (IMAPIv2.0) for Windows XP (KB932716): Internet Explorer cannot download ...XP-KB932716-v2-x86-ENU.exe from download.microsoft.com. The connection with t

  • Captivate movie clips looping in Flash

    I've read the discussions on the forum, but nothing seems to be able to stop a captivate 2 movie clip from looping when brought into Flash. I exported the captivate movie with the default values, converted it to a movie clip in Flash8 so I could resi

  • No materials items transported from SC to local PO after SAPKA70022

    hi, after support package uppgrade to SAPKA70022, there is aproblem with transport material items from shopping cart (SC) to local purchase order (local PO). With services items there is no problem. regards andrzej zwolinski

  • Formatting Integers in a Line

    Hi. Is there any way to write code to write out something like this in the Command Prompt? |     Name    |   Age  | |         John|      15|With those two rows perfectly aligned? If so, how can I do this? Also, it'd be nice if for whatever name lengt